Search NASA⌕ Search

SEARCH · Search NASA

Results for “Time relaxation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Anelastic response of the earth to a dip slip earthquake

The deformation induced by a vertical dip slip earthquake is examined using a variety of rheologic models. In this way the complications of dipping faults are avoided, and the phenomenon of transient peripheral warping is clearly revealed. A thrust fault dipping at 30 deg is investigated, and the important effects of dip and the existence of a slab on the asymmetry of strain pulses propagated into the overthrust and subducted lithosphere are demonstrated. One of the signal results of the study is the essential similarity of the strain patterns for Newtonian and non-Newtonian flow laws: the two rheologies give nearly identical strain field geometries. The principal difference between the two, which is readily observable, is in their time evolution. Relaxation in non-Newtonian rheologies tends to be initially fast, then slow at times that are late in comparison with relaxation in a Newtonian rheology. The possibility of simply recalling the time dependence of a Newtonian solution to obtain an approximate solution to a non-Newtonian problem is demonstrated.

Melosh, H. J.↗
NASA NTRS2003

Effect of altered thyroid state on the in situ mechanical properties of adult cat soleus

To determine the responsiveness of cat hindlimb muscles to thyroid manipulation, adult female cats were made hypothyroid (thyroidectomy plus tapazole treatment), hyperthyroid (synthroid pellets), or maintained euthyroid. After 4 months, the hypothyroid soleus had slower time-to-peak (TPT, 80%) and half-relaxation (HRT) times, whereas the hyperthyroid soleus had faster TPT (20%) and HRT than euthyroid cats. The tension at low stimulation frequencies (5-15 Hz) was higher in hypothyroid and lower in hyperthyroid cats compared to euthyroid cats. Muscle weight, maximum twitch and tetanic (Po) tensions, and maximum rates of shortening (Vmax) were similar across groups. The soleus of hypothyroid cats was more fatigable than normal. The myosin heavy chain (MHC) composition, based on gel electrophoresis, was unaffected by thyroid hormone manipulation. Based on the reaction of monoclonal antibodies for specific MHCs, some fast fibers in the hypothyroid cats coexpressed developmental MHC. These data indicate that 4 months of an altered thyroid state result in changes in the isometric twitch speed properties of the cat soleus, but not the tension-related or isotonic properties. Further, a chronic decrease in thyroid hormone had a greater impact than a chronic increase in thyroid hormone on the mechanical properties of the adult cat soleus. Copyright 2003 S. Karger AG, Basel.

Non-NASA Center↗
NASA NTRS1973

Radiative relaxation behind strong shock waves in hydrogen-helium mixtures

Radiative relaxation rates have been investigated in a series of hydrogen-helium mixtures over a range of temperatures encountered during outer planet atmospheric entry. Using a conical electric arc shock tube, shock waves with velocities between 10 and 36 km/sec were studied in mixtures of 10% to 85% hydrogen in helium diluent. Intensities for several hydrogen continuum wavelengths and the H-alpha and H-beta lines of hydrogen were measured as a function of time. The nonequilibrium relaxation times were longer than expected for shock velocities greater than 18 km/sec and reached a plateau at higher shock velocities. Data from all mixtures were found to correlate with shock wave temperature.

Leibowitz, L. P.↗
NASA NTRS1985

The efficient simulation of separated three-dimensional viscous flows using the boundary-layer equations

A simple and computationally efficient algorithm for solving the unsteady three-dimensional boundary-layer equations in the time-accurate or relaxation mode is presented. Results of the new algorithm are shown to be in quantitative agreement with detailed experimental data for flow over a swept infinite wing. The separated flow over a 6:1 ellipsoid at angle of attack, and the transonic flow over a finite-wing with shock-induced 'mushroom' separation are also computed and compared with available experimental data. It is concluded that complex, separated, three-dimensional viscous layers can be economically and routinely computed using a time-relaxation boundary-layer algorithm.

Van Dalsem, W. R.↗
NASA NTRS1990

Effect of thermal cycling on stress in metallic films on ceramic substrates

The hydrogen maser is the most stable frequency standard currently available for averaging intervals of hours to weeks. A major contributor to maser frequency variations is the maser's microwave resonant cavity: by means of the cavity pulling effect, a change in the cavity's resonance frequency produces a proportional change in the maser's output frequency. To minimize variations in the cavity's dimensions, and thus in its resonance frequency, maser cavities are often constructed of a low-expansivity glass-ceramic material coated on its surface with a conductive metallic film. It was previously shown that silver films like those used in SAO maser cavities develop tensile stress when cooled to room temperature after being fired onto the cavity, and that the stress in such films relaxes with time at a rate proportional to the level of stress. Stress relaxation in maser cavity coatings can alter the shape, and hence the resonance frequency, of the cavity, resulting in a slow variation in the maser's output frequency. The possibility was investigated of reversing the initial tensile stress by precooling the coated cavity material. It was hypothesized that cooling the material well below its normal working temperature and then warming it to its normal temperature would result in a lower tensile stress or even a compressive stress. Under such a condition stress relaxation, and thus any consequent frequency drifts, might be reduced or reversed.

Mattison, Edward M.↗
NASA NTRS1992

Analysis of cyclotron harmonic emissions at the outer planets

The flyby missions of Voyagers 1 and 2 at Jupiter, Saturn and Uranus revealed intense waves above the electron gyrofrequency. Observation of waves at the upper hybrid frequency is often accompanied by power at adjacent electron Bernstein harmonics, and the relative power in these modes depends both on the density and temperature ratios of the cold background electron population and the hot magnetospheric electrons which drive the instability. A model of electron distributions which is consistent with observations is used for analysis of the excited waves, their dependence upon plasma parameters, and the time scales of the saturation processes. It is shown that in the presence of two-temperature electron distributions the linear excitation is due to a fluidlike coupling of two eigenmodes for perpendicular propagation and to kinetic destalization of oblique modes. The dependence of linear growth rates on propagation angle is presented, along with results from particle simulations. A quasi-linear diffusion time for relaxing the hot electron loss cone is calculated and compared with simulation results. This time scale is faster than for local saturation by heating the cold population, and also the convective amplification time scale, suggesting that the waves saturate at quasi-linear levels, while being convectively localized to the equatorial regions of the outer planetary magnetospheres.

Roth, I.↗
NASA NTRS1990

The effect of molecular relaxation processes in air on the rise time of sonic booms

A theory is developed to explain the effect of molecular relaxation processes on the rise time of sonic booms. To determine the rise time of sonic booms, both O2 and N2 relaxation processes must be included. The N2 relaxation process delays the shock pressure reaching the maximum pressure, and the O2 relaxation process causes a shock profile to have a gentle slope. The N2 relaxation controls the lower part of overpressure; the O2 relaxation controls the higher part. The constant rise time curves show that the rise times increase as the overpressures and humidity decrease. The present approach gives longer rise times than those acquired by Bass et al. for given shock overpressures.

Kang, Jongmin↗
NASA NTRSDate not supplied

Experimental Characterization of the Dimensional Stability of Deployable Composite Booms During Stowage

Thin-ply carbon fiber reinforced polymer materials offer the opportunity to create long thin-shell booms with high strength to weight ratios. These booms can be rolled up and stowed in small volumes to be later deployed. These features make them ideal for use in gossamer solar sails as well as other deployable space structures. It has been observed that stowing the booms in rolled-up configurations can cause time-dependent deformations. A comprehensive understanding of the detrimental effects of stowing the coiled booms is necessary to implement these structures in spaceflight missions. During stowage inside the spacecraft, the boom is subjected to a constant deformation/strain that causes it to relax over time, measurable by a decrease in stress. Using large deformation bending tests, the complete fold-stow-unfold-recover cycle of thin-laminate candidates for the rollable booms is characterized. Further bending and stowage testing is done at the boom level. The results from this test campaign will be used to evaluate the dimensional stability of deployable booms made from thin-ply composites that exhibit visco-elasto-plastic behavior and calibrate and validate numerical finite element models that include visco-elasto-plastic material models.

Experimental Characterization↗
NASA NTRS1992

A two-dimensional MHD global coronal model - Steady-state streamers

A 2D, time-dependent, numerical, MHD model for the simulation of coronal streamers from the solar surface to 15 solar is presented. Three examples are given; for dipole, quadrupole and hexapole (Legendre polynomials P1, P2, and P3) initial field topologies. The computed properties are density, temperature, velocity, and magnetic field. The calculation is set up as an initial-boundary value problem wherein a relaxation in time produces the steady state solution. In addition to the properties of the solutions, their accuracy is discussed. Besides solutions for dipole, quadrupole, and hexapole geometries, the model use of realistic values for the density and Alfven speed while still meeting the requirement that the flow speed be super-Alfvenic at the outer boundary by extending the outer boundary to 15 solar radii.

Wang, A.-H.↗
NASA NTRS1982

On Venus impact basins - Viscous relaxation of topographic relief

The viscous relaxation with time of the topographic relief of impact basins on Venus is calculated under the assumption that the surface temperature of the planet has been at or near its presently high value since the time of basin formation. The effects of a decrease in effective viscosity with depth and of the partial to complete isostatic compensation of initial topography are included in the model. An impact basin several hundred kilometers or greater in diameter and three billion years old or older should have negligible topographic relief at present. On this basis, the hypothesis that quasi-circular features of low radar backscatter but little topographic relief may be relaxed remnants of ancient impact basins cannot be excluded. However, large quasi-circular depressions on Venus, such as Atlanta Planitia, are unlikely to be remnants of impact basins, because of their current relief, and so some other process should be found to account for them.

Solomon, S. C.↗
NASA NTRS1991

Transient modeling/analysis of hyperbolic heat conduction problems employing mixed implicit-explicit alpha method

This paper describes the evaluation of mixed implicit-explicit finite element formulations for hyperbolic heat conduction problems involving non-Fourier effects. In particular, mixed implicit-explicit formulations employing the alpha method proposed by Hughes et al. (1987, 1990) are described for the numerical simulation of hyperbolic heat conduction models, which involves time-dependent relaxation effects. Existing analytical approaches for modeling/analysis of such models involve complex mathematical formulations for obtaining closed-form solutions, while in certain numerical formulations the difficulties include severe oscillatory solution behavior (which often disguises the true response) in the vicinity of the thermal disturbances, which propagate with finite velocities. In view of these factors, the alpha method is evaluated to assess the control of the amount of numerical dissipation for predicting the transient propagating thermal disturbances. Numerical test models are presented, and pertinent conclusions are drawn for the mixed-time integration simulation of hyperbolic heat conduction models involving non-Fourier effects.

Tamma, Kumar K.↗
NASA NTRS1965

Numerical integration of kinetic equations.

Relaxation to Maxwellian of Balescu-Lenard equation solved numerically as initial value problem for isotropic distributions of electrons in background of positive charge

MAXWELL DISTRIBUTION↗