SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Passive circuit, using diodes, transistors, and magnetic cores, transforms the voltage of repetitive positive or negative pulses. It combines a pulse transformer with switching devices to effect a resonant flux reset and can transform various pulsed waveforms that have a nonzero average value and are relatively cosely spaced in time.
A common problem for experimental space physicists is the determination of the attitude matrix T which transforms vectors between representations in X and X' coordinate systems according to (vector V sub X) = (T sub XX')(vector V sub X'). A straightforward, simple, and efficient solution for the transformation matrix is a double-cross transformation. It is calculated from any two directions A and B, which are vectors normalized to unit length and are known in both X and X' coordinates. The B direction need be known only well enough to define the plane in which vectors A and B lie. The problem of the intersection of two cones as applicable to attitude solutions is also discussed.
Program THREED was developed for the purpose of a research study on the treatment of control data in lunar phototriangulation. THREED is the code name of a computer program for performing absolute orientation by the method of three-dimensional projective transformation. It has the capability of performing complete error analysis on the computed transformation parameters as well as the transformed coordinates.
The olivine-spinel transformation and the melting behavior of Ni2SiO4 were investigated over the PT ranges of 20-40 kbar, 650-1200 C, and 5-13 kbar, 1600-1700 C, respectively. It was confirmed that Ni2SiO4 olivine melts incongruently at high pressures and that it is a stable phase until melting occurs. The PT slope of the incongruent melting curve is approximately 105 bars/deg. The olivine-spinel transformation curve was shown to be a reversible univariant curve, and could be expressed by the linear equation P(bars) equals 23,300 + 11.8 x T(deg C). The transformation curve determined by Akimoto et al. (1965) is nearly parallel to that of the present work, but lies at pressures about 12% lower.
Existing microwave radiometer technology now provides a suitable method for remote determination of the ocean surface's absolute brightness temperature. To extract the brightness temperature of the water from the antenna temperature equation, an unstable Fredholm integral equation of the first kind was solved. Fast Fourier Transform techniques were used to invert the integral after it is placed into a cross-correlation form. Application and verification of the methods to a two-dimensional modeling of a laboratory wave tank system were included. The instability of the Fredholm equation was then demonstrated and a restoration procedure was included which smooths the resulting oscillations. With the recent availability and advances of Fast Fourier Transform techniques, the method presented becomes very attractive in the evaluation of large quantities of data. Actual radiometric measurements of sea water are inverted using the restoration method, incorporating the advantages of the Fast Fourier Transform algorithm for computations.
An electronic transformation and correlation system has been developed for the Meteor space weather system which provides transformation and scaling of the original picture, accounts for satellite flight altitude and inclinations of the optical axes of the transmitting devices, and simultaneously superposes the geographical coordinate grid on the transformed picture.
An input analog signal to be frequency analyzed is separated into N number of simultaneous analog signal components each identical to the original but delayed relative to the original by a successively larger time delay. The separated and delayed analog components are combined together in a suitable number of adders and attenuators in accordance with at least one component product of the continuous Fourier transform and analog signal matrices to separate the analog input signal into at least one of its continuous analog frequency components of bandwidth 1/N times the bandwidth of the original input signal. The original analog input signal can be reconstituted by combining the separate analog frequency components in accordance with the component products of the continuous Fourier transform and analog frequency component matrices. The continuous Fourier transformation is useful for spectrum analysis, filtering, transfer function synthesis, and communications.
Backward error analyses of the application of Householder transformations to both the standard and the generalized eigenvalue problems are presented. The analysis for the standard eigenvalue problem determines the error from the application of an exact similarity transformation, and the analysis for the generalized eigenvalue problem determines the error from the application of an exact equivalence transformation. Bounds for the norms of the resulting perturbation matrices are presented and compared with existing bounds when known.
Results that suggest the possibility of using a sequential monotone process for solving the feature selection problem using Householder transformations are applied to the divergence separability criterion and an expression for the gradient of the divergence with respect to the generator of a single Householder transformation will be developed. This expression for the gradient is used in any number of differential correction schemes (iterators) that attempt to extremize the divergence. Data sets provided by the Earth Observations Division-JSC are used to demonstrate selecting the Householder transformations that generate the kxn matrix defining the best (in the sense of extremizing the divergence) k linear combinations of features. The tests allow initial comparisons to be made with results. In particular, this technique does not appear to require initial guesses for the iterator to be generated without replacement, exhaustive search, or other similar schemes.
The problem of an anisotropic ellipsoidal inclusion which undergoes a stress-free transformation strain (in the sense of J. D. Eshelby) is considered, and the following theorem is proved: if an ellipsoidal region in an infinite anisotropic linear elastic medium undergoes, in the absence of its surroundings, a stress-free transformation strain which is a polynomial of degree M in given position coordinates, then the final stress and strain state in the transformed inclusion, when constrained by its surroundings, is also a polynomial of degree M in those position coordinates.
The author has identified the following significant results. The original transformation matrix, C, had sixteen axes. However, the first three axes contained 98.83% of the variance contained within the transformation. The values for axes one, two, and three were 83.61%, 14.49%, and 0.72%, respectively. The result was an 81.25% reduction in data bulk. It is expected that using transformed data for classification will result in significant reductions in computer cost.
Material was presented to assist transformer designers in the transition from long-used English units to the less familiar metric equivalents. A coordination between the area product numbers ap (product of window and core cross-section areas) and current density J was developed for a given regulation and temperature rise. Straight-line relationships for Ap and Volume, Ap and surface area At and, Ap and weight were developed. These relationships can now be used as new tools to simplify and standardize the process of transformer design. They also made it possible to design transformers of small bulk and volume or to optimize efficiency.
Models used in geodesy to transform two sets of coordinates are studied and distortions in geodetic networks are investigated. Commonly used transformation models are first reviewed and most of them are interpreted. Differences between various models are discussed. Pitfalls in partial solutions are then considered. It is shown that only as many chords and/or directional elements can be used in the computation as are needed to completely determine the size or shape of the polyhedron implied in the set of Cartesian coordinates. Each additional element causes the normal matrix to be singular provided that all correlations between the chords are used. A number of tables and maps indicating distortions in the NAD 27, Precise Traverse M-R '72, AUS, and SAD 69 geodetic datums are also included. The residuals of the coordinates are scanned for systematic patterns after transforming each geodetic system to the NWL9D Doppler system. Also, an attempt is made to show scale distortions in the NAD 27.
The analytical structures of alternative coordinate transformations for the variables that characterize the deformations of finite element models of flexible appendages on rotating spacecraft are examined. Particular emphasis is given to the truncation operations that are essential for efficient numerical simulations of flexible spacecraft, due to the necessarily large number of coordinates employed in a finite element description. A theorem is developed which establishes necessary conditions for the commutativity of the required truncation and inversion operations. The recommended alternative for the rotating elastic appendage is a complex transformation with previously published orthogonality properties, which permit the derivation in this paper of a relatively simple explicit set of transformed and truncated equations of modal vibration in real variables.
Fourier-like transforms over GF(F sub n), where F sub n = 2(2n) + 1 is a Fermat prime, are applied in decoding Reed-Solomon codes. It is shown that such transforms can be computed using high-radix fast Fourier transform (FFT) algorithms requiring considerably fewer multiplications than the more usual radix 2 FFT algorithm. A special 256-symbol, 16-symbol-error-correcting, Reed-Solomon (RS) code for space communication-link applications can be encoded and decoded using this high-radix FFT algorithm over GF(F sub 3).
An expression was derived for the time transformation t - tau, where t is coordinate time in the solar system barycentric space-time frame of reference and tau is proper time obtained from a fixed atomic clock on earth. This transformation is suitable for use in the computation of high-precision earth-based range and Doppler observables of a spacecraft or celestial body located anywhere in the solar system; it can also be used in obtaining computed values of very long baseline interferometry data types. The formulation for computing range and Doppler observables, which is an explicit function of the transformation t - tau, is described briefly.
The conversion process in spacecraft power electronics requires the use of magnetic components which frequently are the heaviest and bulkiest items in the conversion circuit. This handbook pertains to magnetic material selection, transformer and inductor design tradeoffs, transformer design, iron core dc inductor design, toroidal power core inductor design, window utilization factors, regulation, and temperature rise. Relationships are given which simplify and standardize the design of transformers and the analysis of the circuits in which they are used. The interactions of the various design parameters are also presented in simplified form so that tradeoffs and optimizations may easily be made.
Linear transformations are well-known in the theory of hypergeometric functions. In this note, it is indicated, both by analyses and by supporting numerical experiments, how these transformations can be applied to the computation of Legendre's functions, the incomplete Beta function, and the variance-ratio probability distribution function. It is shown that a simple transformation can in many cases cause dramatic improvement in computation.