Search NASA⌕ Search

SEARCH · Search NASA

Results for “USGS Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Overview of the Landsat-7 Mission

Landsat-7 is scheduled for launch on April 15 from the Western Test Range at Vandenberg Air Force Base, Calif., on a Delta-H expendable launch vehicle. The Landsat 7 satellite consists of a spacecraft bus being provided by Lockheed Martin Missiles and Space (Valley Forge, Pa.) and the Enhanced Thematic Mapper Plus instrument built by Raytheon (formerly Hughes) Santa Barbara Remote Sensing (Santa Barbara, Calif.). The instrument on board Landsat 7 is the Enhanced Thematic Mapper Plus (ETM+). ETM+ improves upon the previous Thematic Mapper (TM) instruments on Landsat's 4 and 5 (Fig. la and lb). It includes the previous 7 spectral bands measuring reflected solar radiation and emitted thermal emissions but, in addition, includes a new 15 in panchromatic (visible-near infrared) band. The spatial resolution of the thermal infrared band has also been improved to 60 m. Both the radiometric precision and accuracy of the sensor are also improved from the previous TM sensors. After being launched into a sun-synchronous polar orbit, the satellite will use on-board propulsion to adjust its orbit to a circular altitude of 438 miles (705 kilometers) crossing the equator at approximately 10 a.m. on its southward track. This orbit will place Landsat 7 along the same ground track as previous Landsat satellites. The orbit will be maintained with periodic adjustments for the life of the mission. A three-axis attitude control subsystem will stabilize the satellite and keep the instrument pointed toward the Earth to within 0.05 degrees. Later this year, plans call for the NASA Earth Observation System (EOS) Terra (AM-1) observatory and the experimental EO-1 mission to closely follow Landsat-7's orbit to support synergistic research and applications from this new suite of terrestrial sensor systems. Landsat is the United States' oldest land-surface observation satellite system, with satellites continuously operating since 1972. Although the program has scored numerous successes in scientific and resource-management applications, Landsat has had a tumultuous history of management and funding changes over its nearly 27-year history. Landsat-7 marks a new direction in the program to reduce the cost of data and increase systematic global coverage for use in global change research as well as commercial and regional applications. With the passage of the Land Remote Sensing Policy Act in 1992, oversight of the Landsat program began to shift from the commercial sector to the federal government. NASA integrated Landsat-7 into its EOS science program in 1994. Landsat-7 is managed and operated jointly by NASA and U.S. Geological Survey (USGS). As a result, the costs of acquiring observations from

Williams, Darrel↗
NASA NTRS2023

Unalakleet Climate: Analyzing Permafrost Degradation and Drainage Networks in Unalakleet, Alaska

The coastal community of Unalakleet is currently the 8th most at-risk community in Alaska due to the adverse effects of climate change that include permafrost degradation, severe coastal erosion, and sea-level rise-induced flood inundation caused by increasingly frequent storm surges. In response, the community has started a managed relocation with support from the Native Village of Unalakleet (NVU) and the National Renewable Energy Lab (NREL)’s Alaska campus in Fairbanks. The Unalakleet Climate NASA DEVELOP team partnered with NREL to provide remote sensing support and analysis for resilience planning in Unalakleet, supporting their ongoing relocation efforts and guiding future expansion. The team utilized Sentinel-1 C-Synthetic Aperture Radar (SAR), WorldView-2, and WorldView-3 datasets from 2017 – 2023 to analyze seasonal summer subsidence and utilized a 2014 Ancillary USGS 5 m Alaska DEM to conduct drainage network analyses that included watershed delineation and Height Above Nearest Drainage (HAND) analysis. The team also used high-resolution WorldView images to locate stable reference points that served as quality control for the team’s analyses. The team’s end products included maps containing subsidence and drainage zones information at and surrounding the relocation site. The team’s products provide NREL with valuable data that enables them to better assist Unalakleet’s managed relocation and assists Unalakleet with adapting to the catastrophic effects of climate change and build resilience in a community on the front lines of climate change.

Ian Lee↗
NASA NTRS2008

Merging of the USGS Atlas of Mercury 1:5,000,000 Geologic Series

After 30 years, the planet Mercury is going to give us new information. The NASA MESSENGER [1] already made its first successful flyby on December 2007 while the European Space Agency and the Japanese Space Agency ISAS/JAXA are preparing the upcoming mission BepiColombo [2]. In order to contribute to current and future analyses on the geology of Mercury, we have started to work on the production of a single digital geologic map of Mercury derived from the merging process of the geologic maps of the Atlas of Mercury, produced by the United States Geological Survey, based on Mariner 10 data. The aim of this work is to merge the nine maps so that the final product reflects as much as possible the original work. Herein we describe the data we used, the working environment and the steps made for producing the final map.

Frigeri, A.↗
NASA NTRSDate not supplied

GeoAI advances in specific landform mapping

Landform mapping (also referred to as geomorphology or geomorphometry) can be divided into two domains: general and specific (Evans 2012). Whereas general landform mapping categorizes all elements of the study area into landform classes, such as ridges, valleys, peaks, and depressions, the mapping of specific landforms requires the delineation (even if fuzzy) of individual landforms. The former is mainly driven by physical properties such as elevation, slope, and curvature. The latter, however, must consider the cognitive (human) reasoning that discriminates individual landforms in addition to these physical properties (Arundel and Sinha 2018). Both mapping forms are important. General geomorphometry is needed to understand geological and ecological processes and as boundary layer input to climate and environmental models. Specific geomorphometry supports such activities as disaster management and recovery, emergency response, transportation, and navigation. In the United States, individual landforms of interest are named in the U.S. Geological Survey (USGS) Geographic Names Information System, a point dataset captured specifically to digitize geographic names from the USGS Historical Topographic Map Collection (HTMC). Named landform extent is represented only by the name placement in the HTMC. Recent work has investigated CNN-based deep learning methods to capture these extents in machine-readable form. These studies first relied on physical properties (Arundel et al. 2020) and then included the HTMC as a band in RGB images in limited testing (Arundel et al. 2023). Results from the HTMC dataset surpassed those using just physical properties and using the HTMC alone performed best due to the hillshading and elevation (contour) data incorporated into the topographic maps. However, results fell short of an operational capacity to map all named landforms in the United States. Thus, our current work expands upon past research by focusing on the HTMC and physical information as inputs and the named landform label extents. Specifically, we propose to leverage pre-trained foundation models for segmentation and optical character recognition (OCR) models to jointly map landforms in the United States. Our approach aims to bridge the disparities among the independent information sources to facilitate informed decision-making. The modeling pipeline performs (1) segmentation using the physical information and (2) information extraction using OCR, in parallel. Then a computer vision approach merges the two branches into a labeled segmentation. References: Arundel, Samantha T., Wenwen Li, and Sizhe Wang. 2020. “GeoNat v1.0: A Dataset for Natural Feature Mapping with Artificial Intelligence and Supervised Learning.” Transactions in GIS 24 (3): 556–72. https://doi.org/10.1111/tgis.12633. Arundel, Samantha T, and Gaurav Sinha. 2018. “Validating GEOBIA Based Terrain Segmentation and Classification for Automated Delineation of Cognitively Salient Landforms BT - Proceedings of Workshops and Posters at the 13th International Conference on Spatial Information Theory (COSIT 2017).” In Proceedings of Workshops and Posters at the 13th International Conference on Spatial Information Theory (COSIT 2017), Lecture Notes in Geoinformation and Cartography, edited by Paolo Fogliaroni, Andrea Ballatore, and Eliseo Clementini, 9–14. Cham: Springer International Publishing. Arundel, Samantha T., Gaurav Sinha, Wenwen Li, David P. Martin, Kevin G. McKeehan, and Philip T. Thiem. 2023. “Historical Maps Inform Landform Cognition in Machine Learning.” Abstracts of the ICA 6 (August): 1–2. https://doi.org/10.5194/ica-abs-6-10-2023. Evans, Ian S. 2012. “Geomorphometry and Landform Mapping: What Is a Landform?” Geomorphology 137 (1): 94–106. https://doi.org/10.1016/j.geomorph.2010.09.029.

machine learning↗
DOE OSTI2024

NEWTS Integrated Dataset (version 1.0)

The National Energy Water Treatment and Speciation (NEWTS) Integrated Dataset v1.0 provides water researchers, community leaders, and regulators with a unified and standardized energy-related wastewater stream database. This resource is derived from 27 state and federal entities, and scientific publications, and contains more than 400,000 sample records, many of which also provide geospatial information. The dataset includes data for several different energy-related wastewater types including produced water, other oil and gas wastewaters, mine drainage, coal ash leachate, and power plant wastewater. The NEWTS Integrated Dataset was built to support environmentally prudent decision-making, explore treatment opportunities, and identify potential critical mineral sources. A subset of this novel resource is also featured on NETL NEWTS State-Level Database Dashboard. Additional data can be found in the NEWTS EDX Group and the NEWTS Federal Database Dashboard.

abandoned mine drainage↗
NASA NTRS1974

Census Cities experiment in urban change detection

The author has identified the following significant results. Mapping of 1970 and 1972 land use from high-flight photography has been completed for all test sites: San Francisco, Washington, Phoenix, Tucson, Boston, New Haven, Cedar Rapids, and Pontiac. Area analysis of 1970 and 1972 land use has been completed for each of the mandatory urban areas. All 44 sections of the 1970 land use maps of the San Francisco test site have been officially released through USGS Open File at 1:62,500. Five thousand copies of the Washington one-sheet color 1970 land use map, census tract map, and point line identification map are being printed by USGS Publication Division. ERTS-1 imagery for each of the eight test sites is being received and analyzed. Color infrared photo enlargements at 1:100,000 of ERTS-1 MSS images of Phoenix taken on October 16, 1972 and May 2, 1973 are being analyzed to determine to what level land use and land use changes can be identified and to what extent the ERTS-1 imagery can be used in updating the 1970 aircraft photo-derived land use data base. Work is proceeding on the analysis of ERTS-1 imagery by computer manipulation of ERTS-1 MSS data in digital format. ERTS-1 CCT maps at 1:24,000 are being analyzed for two dates over Washington and Phoenix. Anniversary tape sets have been received at Purdue LARS for some additional urban test sites.

Wray, J. R.↗
DOE OSTI2024

Mapping Geothermal Indicator Minerals Using Fusion of Target Detection Algorithms

Mineral mapping from satellite images provides valuable insights into subsurface mineral alteration for geothermal exploration. In previous studies, eight fundamental algorithms were used for mineral mapping utilizing USGS spectra, a collection of reflectance spectra containing samples of minerals, rocks, and soils created by the USGS. We used an ASD FieldSpec 4 Hi-RES NG portable spectrometer to collect spectra for analyzing ASTER images of the Coso Geothermal Field. Then, we established the ground-truth information and the spectral library by analyzing 97 samples. Samples collected from the field were analyzed using the CSIRO TSG (The Spectral Geologist of the Commonwealth Scientific and Industrial Research Organization). Based on the mineralogy study, multiple high-purity spectra of geothermal alteration minerals were selected from collected data, including alunite, chalcedony, hematite, kaolinite, and opal. Eight mineral spectral target detection algorithms were applied to the preprocessed satellite data with a proposed local spectral library. We measured the highest overall accuracy of 87% for alunite, 95% for opal, 83% for chalcedony, 60% for hematite, and 96% for kaolinite out of these eight algorithms. Three, four, five, and eight algorithms were fused to extract mineral alteration with the obtained target detection results. The results prove that the fusion of algorithms gives better results than using individual ones. In conclusion, this paper discusses the significance of evaluating different mapping algorithms. It proposes a robust fusion approach to extract mineral maps as an indicator for geothermal exploration.

Cavur, Mahmut↗
NASA NTRS2005

Elevation change (2000-2004) on the Malaspina Glacier, Alaska

The glaciers of the southeastern Alaska coastal region are the largest temperate glacier meltwater source on Earth and may contribute one third of the total glacier meltwater entering the global ocean. Since melt onset and refreeeze timing in this region show a tendency toward earlier onset and longer ablation seasons, accelerated glacier wastage may be occurring. In this study we focus on one of the largest temperate glacier systems on Earth, the Malaspina Glacier. This glacier, with a length of approximately 110 km and an area of approximately square 5,000 km, has the largest piedmont lobe of any temperate glacier. The entire lobe, which lies at elevations below 600 m, is within the ablation zone. We report and interpret ice elevation change between a digital elevation model (DEM) derived from the Shuttle Radar Topography Mission (SRTM C band) observations in Feb. 2000 and ICESat Laser 1-3 observations between Feb. 2003 and Nov. 2004. We use these elevation change results, along with earlier studies, to address the spatial and temporal variability in wastage of the piedmont lobe. Between 2000 and 2004 ice elevation changes of 10-30 meters occurred across the central Malaspina piedmont lobe. From 1972/73 (USGS DEM) to 1999 (SRTM corrected for estimated winter snow accumulation) Malaspina's (Agassiz, Seward Lobe, and Marvine) mean ice thinning was estimated at -47 m with maximum thinning on parts of the lobes to -160 m. The Malaspina's accumulation area is only slightly larger than its ablation area (2,575 km2 vs. 2,433 km2); unfortunately few glaciological observations are available from this source region. Snow accumulation rates have been largely inferred from low-altitude precipitation and temperature data. Comparing sequential ICESat observations in the Malaspina source region, we estimated short-term elevation increases of up to 5 meters during the winter of 2003/04.

Sauber, J.↗
NASA NTRS1981

Landsat - What is operational in water resources

Applications of Landsat data in hydrology and water quality measurement were examined to determine which applications are operational. In hydrology, the principal applications have been surface water inventory, and land cover analysis for (1) runoff modeling and (2) abatement planning for non-point pollution and erosion. In water quality measurement, the principal applications have been: (1) trophic state assessment, and (2) measurement of turbidity and suspended sediment. The following applications were found to be operational: mapping of surface water, snow cover, and land cover (USGS Level 1) for watershed applications; measurement of turbidity, Secchi disk depth, suspended sediment concentration, and water depth.

Middleton, E. M.↗
NASA NTRS1993

New Mars free-air and Bouguer gravity: Correlation with topography, geology and large impact basins

Free-air and Bouguer gravity anomalies from a 50x50 field (MGM635), derived at the Goddard Space Flight Center, with global topography, geology, and the distribution of large impact basins was compared. The free-air gravity anomalies were derived from re-analysis of Viking Orbiter and Mariner 9 tracking data and have a spatial resolution of 250-300 km. Bouguer anomalies were calculated using a 50x50 expansion of the current Mars topography and the GSFC degree 50 geoid as the equipotential reference surface. Rotational flattening was removed using a moment of inertia of 0.365 and the corrections from Table B2 of Sleep and Phillips. Crustal density and mean density were assumed to be 2.9 and 3.93 gm/cm(sup 3). The spherical harmonic topography used has zero mean elevation, and differs from the USGS maps by about 2 km. Comparisons with global geology use a simplified map with about 1/3 the number of units on the current maps. For correlation with impact basins, the recent compilation by Schultz and Frey was used.

Frey, Herbert↗
NASA NTRS1982

Statistical tests of ARIES data

Statistical tests are performed on Project ARIES preliminary baseline measurements in the Southern California triangle formed by the Jet Propulsion Laboratory, the Owens Valley Radio Observatory, and the Goldstone tracking complex during 1976-1980. In addition to conventional one-dimensional tests a two-dimensional test which allows for an arbitrary correlation between errors in individual components is formulated using the Hotelling statistic. On two out of three baselines the mean rate of change in baseline vector is statistically significant. Apparent motions on all three baselines are consistent with a pure shear with north-south compression and east-west expansion of 1 x 10 to the -7th/year. The ARIES measurements are consistent with the USGS geodolite networks in Southern California and the SAFE laser satellite ranging experiment. All three experiments are consistent with a 6 cm/year motion between the Pacific and North American Plates and a band of diffuse shear 300 km wide, except that corresponding rotation of the entire triangle is not found.

Musman, S.↗
NASA NTRS2009

Geologic Mapping of the Lunar South Pole, Quadrangle LQ-30: Volcanic History and Stratigraphy of Schroedinger Basin

In this study we use recent images and topographic data to map the geology and geomorphology of the lunar South Pole quadrangle (LQ-30) at 1:2.5M scale [1-4] in accordance with the Lunar Geologic Mapping Program. Mapping of LQ-30 began during Mest's postdoctoral appointment and has continued under the PG&G Program, from which funding became available in February 2009. Preliminary map-ping and analyses have been done using base materials compiled by Mest, but properly mosaicked and spatially registered base materials are being compiled by the USGS and should be received by the end of June 2009. The overall objective of this research is to constrain the geologic evolution of the lunar South Pole (LQ-30: 60deg -90deg S, 0deg - +/-180deg ) with specific emphasis on evaluation of a) the regional effects of basin formation on the structure and composition of the crust and b) the spatial distribution of ejecta, in particular resulting from formation of the South Pole-Aitken (SPA) basin and other large basins. Key scientific objectives include: 1) Constraining the geologic history of the lunar South Pole and examining the spatial and temporal variability of geologic processes within the map area. 2) Constraining the vertical and lateral structure of the lunar regolith and crust, assessing the distribution of impact-generated materials, and determining the timing and effects of major basin-forming impacts on crustal structure and stratigraphy in the map area. And 3) assessing the distribution of resources (e.g., H, Fe, Th) and their relationships with surface materials.

Mest, S. C.↗
NASA NTRS2011

NASA Water Resources Program

With increasing population pressure and water usage coupled with climate variability and change, water issues are being reported by numerous groups as the most critical environmental problems facing us in the 21st century. Competitive uses and the prevalence of river basins and aquifers that extend across boundaries engender political tensions between communities, stakeholders and countries. In addition to the numerous water availability issues, water quality related problems are seriously affecting human health and our environment. The potential crises and conflicts especially arise when water is competed among multiple uses. For example, urban areas, environmental and recreational uses, agriculture, and energy production compete for scarce resources, not only in the Western U.S. but throughout much of the U.S. and also in numerous parts of the world. Mitigating these conflicts and meeting water demands and needs requires using existing water resources more efficiently. The NASA Water Resources Program Element works to use NASA products and technology to address these critical water issues. The primary goal of the Water Resources is to facilitate application of NASA Earth science products as a routine use in integrated water resources management for the sustainable use of water. This also includes the extreme events of drought and floods and the adaptation to the impacts from climate change. NASA satellite and Earth system observations of water and related data provide a huge volume of valuable data in both near-real-time and extended back nearly 50 years about the Earth's land surface conditions such as precipitation, snow, soil moisture, water levels, land cover type, vegetation type, and health. NASA Water Resources Program works closely to use NASA and Earth science data with other U.S. government agencies, universities, and non-profit and private sector organizations both domestically and internationally. The NASA Water Resources Program organizes its projects under five functional themes. I) Streamflow and Flood Forecasting 2) Water Supply and Irrigation (includes evapotranspiration) 3) Drought 4) Water Quality 5) Climate and Water Resources. To maximize this activity NASA Water Resources Program works closely with other government agencies (e.g., the National Oceanic and Atmospheric Administration (NOAA); the U.S. Department of Agriculture (USDA); the U.S. Geological Survey (USGS); the Environmental Protection Agency (EPA), USAID, the Air Force Weather Agency (AFWA)), universities, non-profit national and international organizations, and the private sector. The NASA Water Resources program currently is funding 21 active projects under the functional themes (http://wmp.gsfc.nasa.gov & http://science.nasa.gov/earth-science/applied-sciences/).

Toll, David L.↗
NASA NTRS1981

Analysis of the Tanana River Basin using LANDSAT data

Digital image classification techniques were used to classify land cover/resource information in the Tanana River Basin of Alaska. Portions of four scenes of LANDSAT digital data were analyzed using computer systems at Ames Research Center in an unsupervised approach to derive cluster statistics. The spectral classes were identified using the IDIMS display and color infrared photography. Classification errors were corrected using stratification procedures. The classification scheme resulted in the following eleven categories; sedimented/shallow water, clear/deep water, coniferous forest, mixed forest, deciduous forest, shrub and grass, bog, alpine tundra, barrens, snow and ice, and cultural features. Color coded maps and acreage summaries of the major land cover categories were generated for selected USGS quadrangles (1:250,000) which lie within the drainage basin. The project was completed within six months.

Morrissey, L. A.↗
NASA NTRS1992

New approaches in interferometric SAR data processing

It is well established that interferometric synthetic aperture radar (SAR) images can be inverted to perform surface elevation mapping. Among the factors critical to the mapping accuracy are registration of the interfering SAR images and phase unwrapping. A novel registration algorithm is presented that determines the registration parameters through optimization. A new figure of merit is proposed that evaluates the registration result during the optimization. The phase unwrapping problem is approached through a new method involving fringe line detection. The algorithms are tested with two SEASAT SAR images of terrain near Yellowstone National Park. These images were collected on Seasat orbits 1334 and 1420, which were very close together in space, i.e., less than 100 m. The resultant elevation map is compared with the USGS digital terrain elevation model.

Lin, Qian↗
NASA NTRS2019

Landsat 9 Micrometeoroid and Orbital Debris (MMOD) Mission Success Approach

Landsat 9* (L9) is the successor mission to Landsat 8 (L8) previously known as Landsat Data Continuity Mission (LDCM). Both missions are large unmanned remote sensing satellites operating in sunsynchronous polar orbits. As opposed to L8/LDCM, systems engineers for L9 incorporated Micrometeoroid/Orbital Debris (MMOD) protection for small object collisions as part of the L9’s mission success criteria. In other words, the NASA Process for Limiting Orbital Debris (NASA-STD-8719.14A) only calls for analyses of the protection of disposal-critical hardware, but L9 opted to also assess and provide small particle penetration protections for all observatory components including instruments that are not part of the spacecraft components needed for controlled reentry. Systems engineers at Goddard developed a design process to protect against MMOD during the life of Low Earth Orbit (LEO) observatories, and in particular the Landsat 9 Mission. Simply stated, this design process enhanced the effectiveness of existing Multi-Layer Insulation (MLI) to provide the needed protection. The end goal of the design process was to establish a necessary blanket areal density for a given electronics box or instrument wall thickness and a separation between the outer MLI blanket and the structure underneath. The trade space was presented as a set of design curves for different combinations of blanket density, box wall thickness, and separation distance between MLI and structure. An advantage of this process was that it is largely independent of MMOD flux data on a surface-by surface basis. Ultimately, cost savings should result from incorporating small object penetration protection early in the design cycle, rather than adding spot shielding blankets later as needed to meet an overall penetration risk standard (the more traditional approach). The approach and implementation to the L9 Observatory design will be addressed in this paper. *L9 is a joint mission being formulated, implemented, and operated by the National Aeronautics and Space Administration (NASA) and the Department of the Interior’s (DOI) United States Geological Survey (USGS).

Approach↗
NASA NTRS2016

Tracking and Establishing Provenance of Earth Science Datasets: A NASA-Based Example

Information quality is of paramount importance to science. Accurate, scientifically vetted and statistically meaningful and, ideally, reproducible information engenders scientific trust and research opportunities. Not surprisingly, federal bodies (e.g., NASA, NOAA, USGS) have very strictly affirmed the importance of information quality in their product requirements. So-called Highly Influential Scientific Assessments (HISA) such as The Third US National Climate Assessment (NCA3) published in 2014 undergo a very rigorous review process to ensure transparency and credibility. To support the transparency of such reports, the U.S. Global Change Research Program (USGCRP) has developed the Global Change Information System (GCIS). A recent activity was performed to trace the provenance as completely as possible for all NCA3 figures that were predominantly based on NASA data. This poster presents the mechanics of that project and the lessons learned from that activity.

Ramapriyan, Hampapuram K.↗
NASA NTRS2005

The Hurricane-Flood-Landslide Continuum

In August 2004, representatives from NOAA, NASA, the USGS, and other government agencies convened in San Juan, Puerto Rim for a workshop to discuss a proposed research project called the Hurricane-Flood-Landslide Continuum (HFLC). The essence of the HFLC is to develop and integrate tools across disciplines to enable the issuance of regional guidance products for floods and landslides associated with major tropical rain systems, with sufficient lead time that local emergency managers can protect vulnerable populations and infrastructure. All three lead agencies are independently developing precipitation-flood-debris flow forecasting technologies, and all have a history of work on natural hazards both domestically and overseas. NOM has the capability to provide tracking and prediction of storm rainfall, trajectory and landfall and is developing flood probability and magnTtude capabilities. The USGS has the capability to evaluate the ambient stability of natural and man-made landforms, to assess landslide susceptibilities for those landforms, and to establish probabilities for initiation of landslides and debris flows. Additionally, the USGS has well-developed operational capacity for real-time monitoring and reporting of streamflow across distributed networks of automated gaging stations (http://water.usgs.gov/waterwatch/). NASA has the capability to provide sophisticated algorithms for satellite remote sensing of precipitation, land use, and in the future, soil moisture. The Workshop sought to initiate discussion among three agencies regarding their specific and highly complimentary capabilities. The fundamental goal of the Workshop was to establish a framework that will leverage the strengths of each agency. Once a prototype system is developed for example, in relatively data-rich Puerto Rim, it could be adapted for use in data-poor, low-infrastructure regions such as the Dominican Republic or Haiti. This paper provides an overview of the Workshop s goals, presentations and recommendations with respect to the development of the HFLC.

Negri, Andrew J.↗