Search NASA⌕ Search

SEARCH · Search NASA

Results for “VIS functions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Thin-Film Deposition and Characterization of a Sn-Deficient Perovskite Derivative Cs 2 SnI 6

In this work, we describe details of a two-step deposition approach that enables the preparation of continuous and well-structured thin films of Cs 2 SnI 6 , which is a one-half Sn-deficient 0-D perovskite derivative (i.e., the compound can also be written as CsSn 0.5 I 3 , with a structure consisting of isolated SnI 6 4- octahedra). The films were characterized using powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), UV-Vis spectroscopy, photoluminescence (PL), photoelectron spectroscopy (UPS, IPES, XPS) and Hall effect measurements. UV-Vis and PL measurements indicate that the obtained Cs 2 SnI 6 film is a semiconductor with a band gap of 1.6 eV. This band gap was further confirmed by the UPS and IPES spectra, which were well reproduced by the calculated density of states with the HSE hybrid functional. The Cs 2 SnI 6 films exhibited n-type conduction with a carrier density of 6(1) × 10 16 cm -3 and mobility of 2.9(3) cm 2 /V·s. While the computationally-derived band structure for Cs 2 SnI 6 shows significant dispersion along several directions in the Brillouin zone near the band edges, the valence band is relatively flat along the $Γ$–X direction, indicative of a more limited hole minority carrier mobility compared to analogous values for the electrons. The ionization potential (IP) and electron affinity (EA) were determined to be 6.4 and 4.8 eV, respectively. The Cs 2 SnI 6 films show some enhanced stability under ambient air, compared to methylammonium lead (II) iodide perovskite films stored under similar conditions; however, the films do decompose slowly, yielding a CsI impurity. We discuss these findings in the context of suitability of Cs 2 SnI 6 for photovoltaic and related optoelectronic applications.

36 MATERIALS SCIENCE↗

The overarching framework of core-collapse supernova explosions as revealed by 3D fornax simulations

We have conducted 19 state-of-the-art 3D core-collapse supernova simulations spanning a broad range of progenitor masses. This is the largest collection of sophisticated 3D supernova simulations ever performed. We have found that while the majority of these models explode, not all do, and that even models in the middle of the available progenitor mass range may be less explodable. This does not mean that those models for which we did not witness explosion would not explode in Nature, but that they are less prone to explosion than others. One consequence is that the ‘compactness’ measure is not a metric for explodability. We find that lower-mass massive star progenitors likely experience lower-energy explosions, while the higher-mass massive stars likely experience higher-energy explosions. Moreover, most 3D explosions have a dominant dipole morphology, have a pinched, wasp-waist structure, and experience simultaneous accretion and explosion. We reproduce the general range of residual neutron-star masses inferred for the galactic neutron-star population. The most massive progenitor models, however, in particular vis à vis explosion energy, need to be continued for longer physical times to asymptote to their final states. We find that while the majority of the inner ejecta have Ye = 0.5, there is a substantial proton-rich tail. This result has important implications for the nucleosynthetic yields as a function of progenitor. Finally, we find that the non-exploding models eventually evolve into compact inner configurations that experience a quasi-periodic spiral SASI mode. We otherwise see little evidence of the SASI in the exploding models.

79 ASTRONOMY AND ASTROPHYSICS↗

A nanocomposite of Au-AgI core/shell dimer as a dual-modality contrast agent for x-ray computed tomography and photoacoustic imaging

Purpose: To develop a core/shell nanodimer of gold (core) and silver iodine (shell) as a dual-modal contrast-enhancing agent for biomarker targeted x-ray computed tomography (CT) and photoacoustic imaging (PAI) applications. Methods: The gold and silver iodine core/shell nanodimer (Au/AgICSD) was prepared by fusing together components of gold, silver, and iodine. The physicochemical properties of Au/AgICSD were then characterized using different optical and imaging techniques (e.g., HR- transmission electron microscope, scanning transmission electron microscope, x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, Z-potential, and UV-vis). The CT and PAI contrast-enhancing effects were tested and then compared with a clinically used CT contrast agent and Au nanoparticles. To confer biocompatibility and the capability for efficient biomarker targeting, the surface of the Au/AgICSD nanodimer was modified with the amphiphilic diblock polymer and then functionalized with transferrin for targeting transferrin receptor that is overexpressed in various cancer cells. Cytotoxicity of the prepared Au/AgICSD nanodimer was also tested with both normal and cancer cell lines. Results: The characterizations of prepared Au/AgI core/shell nanostructure confirmed the formation of Au/AgICSD nanodimers. Au/AgICSD nanodimer is stable in physiological conditions for in vivo applications. Au/AgICSD nanodimer exhibited higher contrast enhancement in both CT and PAI for dual-modality imaging. Moreover, transferrin functionalized Au/AgICSD nanodimer showed specific binding to the tumor cells that have a high level of expression of the transferrin receptor. Conclusions: The developed Au/AgICSD nanodimer can be used as a potential biomarker targeted dual-modal contrast agent for both or combined CT and PAI molecular imaging.

61 RADIATION PROTECTION AND DOSIMETRY↗

[CuCln](2-n) Ion-Pair Species in 1-Ethyl-3-Methylimidazolium Chloride Ionic Liquid-Water Mixtures: Ultraviolet-Visible, X-ray Absorbtion Fine Structure, and Density Functional Theory Characterization

We report details of the coordination environment about Cu(II) in a pure ionic liquid, 1- ethyl-3-methylimidazolium chloride ([EMIM]Cl) and in mixtures containing varying amounts of water from 0-100% of the [EMIM]Cl. There are many stages in the ion pairing of the divalent cation, Cu(II) including the contact ion pairing of Cu2+ with multiple Cl- to form various CuCln (2-n) polyanions. Thereis also the subsequent solvation and ion pairing of the polychlorometallate anion with the EMIM+ cation. Using a combination of x-ray absorption fine structure (XAFS), UV-Vis spectroscopy and electronic structure calculations (TDDFT) we are able to follow the detailed structural changes about Cu(II). Ion pair formation is strongly promoted in [EMIM]Cl by the low dielectric constant and by the extensive breakdown of the water hydrogen bond network in [EMIM]Cl/water mixtures. In the [EMIM]Cl solvent the CuCl4 2- species dominates and it’s geometry is quite similar to gas-phase structure. These results are important in understanding catalysis and separation processes involving transition metals in ionic liquid systems.

08 HYDROGEN↗

Seasonal, Spectral, and Regional Characterization of Deep Convective Clouds Top-of-Atmosphere Bidirectional Reflectance for Improved Satellite Intercalibration

The NASA CERES project provides the scientific community with regional broadband fluxes designed for long-term climate monitoring. The CERES climate quality dataset requires that the CERES instrument, as well as the MODIS and VIIRS imager records to be radiometrically stable over time. Deep Convective Clouds (DCCs) are spectrally uniform, near-Lambertian natural diffusers offering high signal-to-noise ratio and stable radiometric response in the VIS-NIR spectrum. For shortwave infrared (SWIR) wavelengths greater than 1.2µm, the DCC response is significantly influenced by cloud particle size and atmospheric absorption. Previous studies improved the characterization of the SWIR band DCC radiance, by using channel specific monthly empirical BRDFs as well as using the probability density function mean statistic to track the SWIR band stability. Also, that the DCC radiance is greater over land than over ocean and that the TWP DCC radiance has the lowest tropical DCC radiance. This study confirms and improves upon the previous studies. The study stratified the tropics regionally into land and ocean domains and applied their respective ocean-only and land-only empirical monthly BRDFs and normalized the land DCC BRDF corrected radiances with their ocean counterpart. This approach provided the most stable DCC response. The DCC BRDF corrected radiance monthly standard error was 0.24%, 0.62%, 0.59%, and 0.43% for the 1.24µm, 1.37µm, 1.61µm, and 2.25µm SWIR bands, which reduced the standard error 20%, 13%, 24%, and 26%, respectively when compared with the all-surface approach. The same approach was attempted over the Tropical Western Pacific and found not to be an improvement over the tropical domain. Further stratification of the tropical domain will need to balance sufficient sampling while accounting for regional DCC radiance differences.

Prathana Khakurel↗

Decade-Long Ozone Profile Record from Suomi NPP OMPS Limb Profiler: Assessment of Version 2.6 Data

We evaluate a decadal ozone profile record derived from the Suomi National Polar-orbiting Partnership (SNPP) Ozone Mapping and Profiler Suite (OMPS) Limb Profiler (LP) satellite instrument. In 2023, the OMPS LP data were re-processed with the new version 2.6 retrieval algorithm that combines measurements from the ultraviolet (UV) and visible (VIS) parts of the spectra and employs the second order Tikhonov regularization to retrieve a single vertical ozone profile between 12.5 km (or cloud tops) and 57.5 km with the vertical resolution of about 1.9 - 2.5 km between 20-55 km. The algorithm uses radiances measured at six UV ozone-sensitive wavelengths (295, 302, 306, 312, 317 and 322 nm) paired with 353 nm, and one VIS wavelength at 606 nm combined with 510 nm and 675 nm to form a triplet. Each wavelength pair or triplet is used over a limited range of tangent altitudes where the sensitivity to ozone changes are strongest. A new implemented aerosol correction scheme is based on a gamma-function particle size distribution. Numerous calibration changes that affected ozone retrievals were also applied to measured LP radiances, including updates in altitude registration, radiometric calibration, stray light, and spectral registration. The key version 2.6 improvement is the reduction in relative drifts between LP ozone and correlative measurements, linked previously to a drift in the version 2.5 LP altitude registration. We compare LP ozone profiles with those from Aura Microwave Limb Sensor (MLS) to quantify ozone changes in version 2.6.

Limb scattering↗

Microstructural, optical and electrical properties of CdS thin films grown by spray pyrolysis technique as a function of substrate temperature

In this research, nanocrystalline cadmium sulfide thin films were produced by the spray pyrolysis technique on glass substrates. The effects of substrate temperature in the range 400–550 °C on the structural, morphological, optical, and electrical properties of the thin films were investigated. The thin films have been characterized by investigating their X-ray diffraction, field emission scanning electron microscope (FE-SEM), and optical absorption (UV–Vis) measurements. X-ray analysis revealed that thin films were a polycrystalline structure with the hexagonal phase in all cases and by increasing in substrate temperature, crystallite size decreases, and dislocation density increases. The FE-SEM images showed that the surface of the thin films is uniform, homogeneous and without cracks. The average sizes of the grains are at the range of 210–235 nm. The obtained values for optical band gap have been in the range of 2.18–2.41 eV, where the value of optical band gap for the thin films decreases by increasing substrate temperature. The Urbach energies of the thin films increase as the substrate temperature is increased. When substrate temperature increased from 400 to 550 °C, electrical resistivity increased from 531 to 2817 Ω cm, carrier concentration decreased from 15.96 × 10{sup 14} to 3.71 × 10{sup 14} cm{sup −3}, Hall mobility decreased from 7.37 to 5.98 cm{sup 2}/V s. Hall effect analysis indicated that the thin films exhibited n-type conductivity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Novel colloidal materials from functionalized polyoxometalates

Here, novel colloidal materials were prepared for the first time from the organo-functionalized Anderson structure polyoxometalate species [NaV IV 6 O 6 {(OCH 2 CH 2 ) 2 N(CH 2 CH 2 OH)} 6 ]Cl·H 2 O and the mixed-addenda Keggin structure polyoxometalate, K 4 (PVW 11 O 40 ). The materials were characterized by SEM, TGA, FTIR and UV-vis spectroscopy. The colloidal materials are readily separated from suspension in the form of redistributable micrometer-scale monoliths, which may be considered a type of POM heterogenation. The monoliths are insoluble in low polarity media and lower aliphatic alcohols and readily form thin-films (δ < 100 um) by solvent casting.

36 MATERIALS SCIENCE↗

Synthesis and characterization of CdSe/ZnS quantum dots conjugated with poly (ethylene glycol) diamine

Bio-functionalization or surface modification is an important technique to obtain biocompatibility in semiconductor nanoparticles for biomedical applications. In this study semiconductor core/shell quantum dots of CdSe/ZnS have been prepared by chemical reduction method and then further PEGylated using Poly(ethylene glycol) diamine of M{sub w} 2000. They were characterized by UV-vis spectroscopy & Fourier transform infrared spectroscopy. The results reveals the successful PEGylation of CdSe/ZnS quantum dots.

36 MATERIALS SCIENCE↗

Ulcers in restrained rats: Study of protective substances

The genesis of ulcers in restrained rats is discussed through an investigation of the relationship between the protective effects of nervous system effectual substances examined vis-a-vis ulcers in restrained rats and their elective or secondary pharmacologic effects. The substances used were capable of either peripheral parasympatholytic, sympatholytic, ganglioplegic, spasmolytic effects or central, hypnotic, tranquilizing, neuroleptic, analgesic effects. The regular and considerable protection observed with parasympatholytics (atropine sulfate, benzylonium bromide, dihexyverine, J.L. 1344) and a ganglioplegic (pentamethonium) is a function of their anticholinergic properties. It is of less importance with dibenamine, a sympatholytic action on the adrenergic receptors. Among the central depressive substances tested (hypnotics, tranquilizers, neuroleptics, analgesic), phenobarbital at a nonhypnotic dose, and dextromoramide at a nonanalgesic dose, show antiulcerous effects, which are found with chlorpromazine only at cataleptogenic doses.

Buche, L.↗

Directional Degradation of Spectralon Diffuser Under Ionizing Radiation for Calibration of Space-Based Sensors

Assessment of the effect of Vacuum Ultra Violet (VUV) irradiation on the Bidirectional Reflectance Distribution Function (BRDF) of Spectralon is presented in this paper. The sample was a 99% white Spectralon calibration standard irradiated with VUV source positioned at 60o off the irradiation direction for a total of 20 hours. The BRDF before and after VUV irradiation was measured and compared at number of wavelengths in the UV, VIS and IR. Non-isotropic directional degradation of Spectralon diffuser under ionizing radiation was detected at different BRDF measurement geometries primarily at UV spectral range. The 8o directional/hemispherical reflectance of the same sample was also measured and compared from 200nm to 2500nm. Index Terms BRDF, Reflectance, Multiangular, Spectralon, Remote Sensing

Georgiev, G. T.↗

Artificial linear brush abrasion of coatings for photovoltaic module first-surfaces

Natural soiling and the subsequent necessary cleaning of photovoltaic (PV) modules result in abrasion damage to the cover glass. The durability of the front glass has important economic consequences, including determining the use of anti-reflective and/or anti-soiling coatings as well as the method and frequency of operational maintenance (cleaning). Artificial linear brush abrasion using Nylon 6/12 bristles was therefore examined to explore the durability of representative PV first-surfaces, i.e., the surface of a module incident to direct solar radiation. Specimens examined include silane surface functionalized-, roughened (etched)-, porous silica-coated-, fluoropolymer-coated-, and ceramic (TiO 2 or ZrO 2 /SiO 2 /ZrO 2 /SiO 2 )-coated-glass, which are compared to monolithic-poly(methyl methacrylate) and -glass coupons. Characterization methods used in this study include: optical microscopy, ultraviolet–visible–near-infrared (UV-VIS-NIR) spectroscopy, sessile drop goniometry, white-light interferometry, atomic force microscopy (AFM), and depth-profiling X-ray photoelectron spectroscopy (XPS). The corresponding characteristics examined include: surface morphology, transmittance (i.e., optical performance), surface energy (water contact angle), surface roughness, scratch width and depth, and chemical composition, respectively. The study here was performed to determine coating failure modes; identify characterization methods that can detect nascent failures; compare the durability of popular contemporary coating materials; identify their corresponding damage characteristics; and compare slurry and dry-dust abrasion. This study will also aid in developing an abrasion standard for the PV industry.

14 SOLAR ENERGY↗

Note: Enhanced production of He{sup +} from the Versatile Ion Source (VIS) in off-resonance configuration

The Versatile Ion Source (VIS) is a microwave discharge ion source installed at INFN-LNS and here used as test-bench for the production of high intensity low emittance proton beams and for studies on plasma physics. A series of measurements have been carried out with VIS in order to test the source with light ions. In particular a He{sup +} beam has been characterized in terms of plasma discharge parameters. The experiment has been triggered by the observation of X-radiation emission from the plasma for some configuration of the magnetic field profile. The plasma electron energy distribution function is in fact modified when in some regions of the plasma chamber under-resonance discharge takes place, fulfilling the condition that allows the electromagnetic wave to electrostatic wave conversion. These tests allowed obtaining more than 50 mA of He{sup +} beams.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of zinc oxide nanoparticle by sonochemical method and study of their physical and optical properties

With the miniaturization of crystal size, the fraction of under-coordinated surface atoms becomes dominant, and hence, materials in the nano-regime behave very differently from the similar material in a bulk. Zinc oxide (ZnO), particularly, exhibits extraordinary properties such as a wide direct band gap (3.37 eV), large excitation binding energy (60 meV), low refractive index (1.9), stability to intense ultraviolet (UV) illumination, resistance to high-energy irradiation, and lower toxicity as compared to other semiconductors. This very property makes Zinc Oxide a potential candidate in many application fields, particularly as a prominent semiconductor. Zinc Oxide plays a significant role in many technological advances with its application in semiconductor mediated photocatalytic processes and sensor, solar cells and others. In present study, Zinc Oxide (ZnO) has been synthesized using three different precursors by sonochemical method. Zinc Acetate Dihydrate, Zinc Nitrate Hexahydrate and Zinc Sulphate Heptahydrate used as a precursor for the synthesis process. The synthesized ZnO nanoparticle has been found under the range of ∼50 nm. Zinc oxide nanoparticles were characterized using different characterizing tools. The as-synthesized ZnO was characterized by Fourier Transform-Infrared Spectroscopy (FT-IR) for the determination of functional group; Scanning Electron Microscopy equipped with Energy Dispersive Spectroscopy (SEM-EDS) for Morphology and elemental detection respectively, Transmission Electron Microscopy for Particle size distribution and morphology and X-Ray Diffraction (XRD) for the confirmation of crystal structure of the nanomaterial. The optical properties of the ZnO were examined by UV-VIS spectroscopy equipped with Diffuse Reflectance spectroscopy (DRS) confirmed the optical band gap of ZnO-3 around 3.23 eV resembles with the band gap of bulk ZnO (3.37eV). The TEM micrograph of the as-synthesized material showed perfectly spherical shaped nanoparticle under the size range of 50nm. The XRD data showed that the ZnO-3 which was synthesized using Zinc Nitrate Hexahydrate as precursor showed the hexagonal wurtzite crystal structure. The XRD data obtained were compared with the JCPDS standard data. The precursor Zinc Nitrate Hexahydrate (ZnO-3) showed the good yield, monodispersity and size of nanoparticle under the range of 50 nm. The ZnO nanoparticles synthesize using different precursor was found effective in order of ZnO-3, followed by ZnO-1 & ZnO-2. The Synthesized ZnO has wider application in environmental remediation and clean-up as a potential nano-catalyst.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Isolation and Purification of Cu-free Methanobactin from Methylosinus trichosporium OB3b

The isolation of highly pure copper-free methanobactin is a prerequisite for the investigation of the biogeochemical functions of this chalkophore molecule produced by methane oxidizing bacteria. Here, we report a purification method for methanobactin from Methylosinus trichosporium OB3b cultures based on reversed-phase HPLC fractionation used in combination with a previously reported resin extraction. HPLC eluent fractions of the resin extracted product were collected and characterized with UV-vis, FT-IR, and C-1s NEXAFS spectroscopy, as well as with elemental analysis and ESI-MS. The results showed that numerous compounds other than methanobactin were present in the isolate obtained with resin extraction. Molar C/N ratios, mass spectrometry measurements, and UV-vis spectra indicated that methanobactin was only present in one of the HPLC fractions. On a mass basis, methanobactin carbon contributed only 32% to the total organic carbon isolated with resin extraction. Our spectroscopic results implied that besides methanobactin, the organic compounds in the resin extract comprised breakdown products of methanobactin as well as polysaccharide-like substances. Our results demonstrate that a purification step is indispensable in addition to resin extraction in order to obtain pure methanobactin. The proposed HPLC purification procedure is suitable for semi-preparative work and provides copper-free methanobactin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revisiting two thiophosphate compounds constituting d 0 transition metal HfP 2 S 6 and d 10 transition metal α-Ag 4 P 2 S 6 as multifunctional materials for combining second harmonic generation response and photocurrent response

Two acentric thiophosphate compounds, HfP 2 S 6 and α-Ag 4 P 2 S 6 , are revisited and studied as infrared nonlinear optical materials. HfP 2 S 6 and α-Ag 4 P 2 S 6 were structurally characterized without any property measurements. Here, in this work, HfP 2 S 6 and α-Ag 4 P 2 S 6 were synthesized via high temperature salt flux reactions. Low-temperature polymorph acentric α-Ag 4 P 2 S 6 was purified and grown as mm-sized crystals with the aid of AgBr flux. The AgBr flux was revealed to play an important role in stabilizing the acentric α-Ag 4 P 2 S 6 . The acentric α-Ag 4 P 2 S 6 transforms to centrosymmetric β-Ag 4 P 2 S 6 at 850(5) K, which is revealed by differential scanning calorimetry (DSC) analysis and powder X-ray diffraction experiments. HfP 2 S 6 and α-Ag 4 P 2 S 6 are discovered by UV-vis spectrum measurements as indirect bandgap semiconductors with bandgaps of 2.2(1) eV and 2.5(1) eV, respectively, which is supported by DFT calculations and TB-LMTO-ASA calculations. The bonding pictures of α-Ag 4 P 2 S 6 were studied by crystal orbital Hamilton population calculations (COHP) coupled with electron localization function (ELF) analysis. DFT calculations predict that HfP 2 S 6 and α-Ag 4 P 2 S 6 would exhibit different optical performances regardless of being constructed from identical [P 2 S 6 ] motifs. HfP 2 S 6 exhibits a low second harmonic generation (SHG) response, ~0.21 × AGS (for the sample of particle size of 25 μm). α-Ag 4 P 2 S 6 possesses moderate SHG response, ~0.61 × AGS (for the sample of particle size of 225 μm) coupled with a high laser damage threshold (LDT) of ~3.2 × AGS. Characteristics of high ambient stability, moderate bandgap and SHG response, type-I phase-matching capability, and high LDT together with the easy growth of large crystals make α-Ag 4 P 2 S 6 attractive for future infrared nonlinear optical applications. Photocurrent measurements found that α-Ag 4 P 2 S 6 and β-Ag 4 P 2 S 6 have high photocurrent response, 165 nA cm -2 and 135 nA cm -2 , respectively. α-Ag 4 P 2 S 6 is a new multifunctional material of the ternary Ag–P–S system, which combines nonlinear optical (NLO) properties and photocurrent response.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Leveraging Sequential Doping of Semiconducting Polymers to Enable Functionally Graded Materials for Organic Thermoelectrics

With the ability to modulate electronic properties through molecular doping coupled with ease in processability, semiconducting polymers are at the forefront in enabling organic thermoelectric devices for thermal energy management. In contrast to uniform thermoelectric material properties, an alternative route focuses on functionally graded materials (FGMs) where one spatially controls and optimizes transport properties across the length of a thermoelectric material. While primarily studied in the context of inorganic materials, the concept of FGMs for organic thermoelectrics has not been explored. Herein, we introduce how molecular doping of semiconducting polymers enables spatial compositional control of thin-film FGMs. Specifically, we utilize sequential vapor doping of poly[2,5-bis(3-tetradecylthiophen-2-yl) thieno [3,2-b]thiophene] (PBTTT) with the small molecule acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) to fabricate the simplest form of FGMs – double- segmented thin films. The two thin-film segments are of equal length (7.5 mm), but each set to different doping levels. Our study focuses on understanding the thermoelectric properties (Seebeck coefficient, α, and electronic conductivity, σ) and structural properties (through X-ray scattering, UV-vis-NIR spectroscopy, and Raman spectroscopy) within and across the two segments. We observe the presence of a small diffuse interfacial region of 0.5 – 1 mm between the two segments where the doping level and transport properties vary continuously. Despite the diffuse interface, the measured effective Seebeck coefficient (αeff) across the two segments is simply the average of α within each segment. Importantly, this experimental result is consistent with reported mathematical models describing αeff in graded thermoelectric materials. Finally, our results demonstrate the facile fabrication and characterization of functionally graded organic thermoelectric materials, providing guidelines for further development on more complex FGMs.

36 MATERIALS SCIENCE↗

Effects of calcination on microscopic and mesoscopic structures in Ca- and Sr-doped nano-crystalline lanthanum chromites

Calcination behavior of nano-crystalline lanthanum chromites doped with calcium and strontium has been probed by Fourier transform infrared spectroscopy, X-ray diffraction and small-angle neutron scattering as a function of temperature. Infrared spectroscopic results imply that over a range of temperatures, some intermediate phase of dopant chromates evolve and then dissolve back, which has also been confirmed by the XRD. Neutron scattering data reveal a fractal type correlation of building blocks in virgin powders. Increase in fractal dimension and reduction in upper cutoff vis-a-vis the densification of agglomerates were found with increasing calcination temperature. Calcination, beyond 900 {sup o}C, results in breaking down of the fractal morphology almost completely. Such shrinkage event also results in a modification of the microscopic structure. These changes have been attributed to the compaction of agglomerates of both Ca- and Sr-doped lanthanum chromites, assisted via liquid state sintering by the melting of the intermediate phases at intermediate calcination stages. -- Graphical Abstract: Dopant chromates evolve as intermediate phases during calcination of Ca- and Sr-doped nano-crystalline lanthanum chromites at intermediate temperatures, around 900 {sup o}C, evident from infrared spectroscopy. Such an event results in a modification of the microscopic and mesoscopic structures. Display Omitted Research highlights: {yields} Meso/microscopic structures of La{sub 0.7}Ca{sub 0.3}CrO{sub 3} and La{sub 0.8}Sr{sub 0.2}CrO{sub 3} modify during calcination. {yields} Transient phases CaCrO{sub 4} and SrCrO{sub 4} appear at intermediate temperatures. {yields} Bond length, unit cell volume, etc. modify as intermediate phases evolve and extinct. {yields} Compaction of the agglomerates takes place due to liquid state assisted sintering.

36 MATERIALS SCIENCE↗