Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vibrational”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Wind tunnel balance system for determination of wind-induced vibrations of a rigid shuttle model in the launch configuration

A wind tunnel balance system was designed to determine the wind-induced vibrations of a space shuttle model. The balance utilizes a flexible sting mounting in conjunction with a geometrically scaled rigid model. Bending and torsional displacements are determined through strain-gauge-instrumented spring bar mechanisms. The natural frequency of the string-model system can be varied continuously throughout the expected scaled frequency range of the shuttle vehicle while a test is in progress by the use of moveable riders on the spring bar mechanism. Through the use of a frequency analyzer, the output can be used to determine troublesome vibrational frequencies. A dimensional analysis of the wind-induced vibration problem is also presented which suggests a test procedure. In addition a computer program for analytical studies of the forced vibration problem is presented.

Source record↗
NASA NTRS1972

Design, fabrication and testing of two electrohydraulic vibration isolation systems for helicopter environments

Two electrohydraulic vibration isolation systems were designed and fabricated to reduce the vertical vibrations transmitted to the XH-51N research helicopter cabin at the blade passage frequency (18 Hz) and its first harmonic (36 Hz). Hydraulic power and electrical control are provided to two separate servoactuators from a common power supply and control electronics package located behind the pilot's seat. One servoactuator is installed between the cabin and fuselage and replaces an existing passive spring. A second servoactuator is mounted between the existing seat and cabin floor. Both servoactuators incorporate a mechanical failsafe design. The control electronics circuitry provides automatic tracking of the blade passage frequency. Results of laboratory, environmental and ground vibration tests employing an XH-51A stripped down helicopter fuselage show that the active cabin isolator reduces the vertical vibrations transmitted from the fuselage attachment point to the cabin attachment point at 18 and 36 Hz (or as an alternative, 6 Hz) by better than 90 percent.

Allen, R. E.↗
NASA NTRS1972

Free in-plane vibration of circular arches.

Numerical data are presented for the natural frequencies and modes of vibration of hinged and fixed, uniform, circular arches vibrating in their own plane, and the effects of the various parameters affecting the response are analyzed. It is shown that the vibrational modes may be almost purely flexural, or almost purely extensional, or the extensional and flexural actions may be strongly coupled. The conditions of occurrence of each type of behavior are defined, and simple approximate formulas are derived; using these formulas, the free vibrational characteristics of arches may be estimated to a satisfactory degree of accuracy for most practical applications. The approach used to derive the approximate formulas may also be applied to arches having other boundary conditions, shapes, or distributions of stiffness and mass.

Veletsos, A. S.↗
NASA NTRS1973

Relaxation of the V = 4,5,6,7, Sigma g/+/ vibrational levels of carbon monoxide studied by laser absorption.

The vibrational relaxation of individual vibration rotation levels of carbon monoxide behind incident shock waves of carbon monoxide has been studied by the method of laser absorption. For the particular vibrational states (V = 4 to 7) and temperature range (2500 to 5500 K) studied, it is concluded that the characteristic relaxation times are in excellent agreement with those obtained via previous measurements of 'bulk' gas properties. Further, the data furnish strong corroboration of the idea that the individual levels are in Boltzmann vibrational equilibrium during the relaxation process.

Chackerian, C., Jr.↗
NASA NTRS1974

Insulation of nonlinear and random vibrations in the mining industry

The insulation of nonlinear and random vibrations is considered for some ore preparing and sorting implements: rotary crushers, resonance screens, hammer mills, etc. The appearance of subharmonic vibrations is analyzed, and the conditions for their appearance are determined. A method is given for calculating the insulation of these vibrations by means of elastic elements made of rubber. The insulation of the random vibrations produced by Symons crushers is calculated by determining the transmissability and deformation of the insulation system for a narrow band random response.

Zeveleanu, C.↗
NASA NTRS1974

Vibration and recoil control of pneumatic hammers

Vibration sources are described for pneumatic hammers used in the mining industry (pick hammers), in boiler shops (riveting hammers), etc., bringing to light the fact that the principal vibration source is the variation in air pressure inside the cylinder. The present state of the art of vibration control of pneumatic hammers as it is practiced abroad, and the solutions adopted for this purpose, are discussed. A new type of pneumatic hammer with a low noise and vibration level is presented.

Constantinescu, I. N.↗
NASA NTRS1973

The use of a digital computer for calculation of acoustic fields of complex vibrating structures by the reciprocity principle

A program was compiled for calculating acoustical pressure levels, which might be created by vibrations of complex structures (an assembly of shells and rods), under the influence of a given force, for cases when these fields cannot be measured directly. The acoustical field is determined according to transition frequency and pulse characteristics of the structure in the projection mode. Projection characteristics are equal to the reception characteristics, for vibrating systems in which the reciprocity principle holds true. Characteristics in the receiving mode are calculated on the basis of experimental data on a point pulse space velocity source (input signal) and vibration response of the structure (output signal). The space velocity of a pulse source, set at a point in space r, where it is necessary to calculate the sound field of the structure p(r,t), is determined by measurements of acoustic pressure, created by a point source at a distance R. The vibration response is measured at the point where the forces F and f exciting the system should act.

Rimskiy-Korsakov, A. V.↗
NASA NTRS1973

Experimental estimation of the statistical parameters of vibrations of a shell (using a digital computer), 1

The distribution pattern of the amplitudes of vibrations, measured at various points on the surface of a shell, stimulated by a point source of harmonic force in the sound frequency range was studied experimentally. This pattern permits a valid spacing estimate to be carried out of the average structural characteristics of the vibrations, which are used for both estimation of the vibration excitability of the structure and for estimation of the effectiveness of use of a vibration-absorbing covering.

Kanayev, B. A.↗
NASA NTRS1973

The use of a digital computer for investigation of the dynamic characteristics of a man while pressing vertically downward with the straight arm on the handle of a vibrator (instrument)

The dynamic characteristics of a man were investigated by the resonance method, by means of recordings of the amplitude-frequency characteristics of a vibrator straight arm human body system on a standard automatic recorder. Experiments were carried out with a specially constructed vibrator, the moving system of which was fastened to a bronze suspension with small losses. Vibrations of the handle, fastened to the moving system, were recorded with an accelerometer. The mass of the moving system m, rigidity of the suspension k and friction coefficient r of the vibrator (calibration) were determined by exact formulas.

Zazhivikhina, A. I.↗
NASA NTRS1973

Method of approximate determination of the characteristics of nonlinear vibrational systems

Methods are discussed for determining the characteristics of elements of nonlinear vibrational systems, from the results of analyzing forced vibrations which are approximate in themselves, since they are based on the use of experimental data. The constant components of the linearized characteristics and linearization coefficients are determined experimentally by finding the values of these quantities at different vibration amplitudes and frequencies and subsequent approximation of their analytical expressions. Simple and convenient, although approximate, formulas for determining the characteristics of vibrational systems from experimentally known functions are derived.

Atstupenene, R. P.↗
NASA NTRS1973

Certain characteristics and capture regions of nonlinear vibrating systems

Free vibrations of a system and vibrations which are multiples of them in frequency are discussed. The corresponding periodic forced vibrations of the type n/m (n is the number of periods of disturbance between periods of movement and m is the number of periods of movement in one period of disturbance), generated by a harmonic or close to harmonic disturbance, are propagated close to the corresponding curves of the free vibrations and their frequency multiples. It has been proposed that investigation of transitional modes of motion and capture regions be carried out by precise methods in phase space, with the least number of coordinates. Thus, for example, for nonautonomous second order equations (for example, the Duffing equations), in place of three variables (coordinates, velocity, phases), it is proposed to use two: velocity during transition of the coordinate through zero and phase.

Ragulskene, V. L.↗
NASA NTRS1973

Electronic damping of mechanical vibrations

The conditions required for measuring and recording the patterns of vibration of a process are discussed. It is stated that the frequency of the process being investigated must be an order of magnitude lower than the natural frequency of the sensitive receiving element for sufficient accuracy. The elastic element must damp so the frequency range of the vibrational patterns being investigated can be expanded. This is especially true of the tensile stresses of a moving signal carrier. A method is proposed for damping mechanical vibrations of elastic sensitive elements with semiconductor strain gages, based on electronic compensation of the natural vibrations. A schematic diagram is provided to show the conditions.

Vasilyev, P.↗
NASA NTRS1973

Vibrational relaxation of carbon monoxide studied by two-wavelength infrared emission

Experimental results are presented for the vibrational relaxation of pure carbon monoxide behind incident shock waves over the temperature range 4000 to 6300 K. The data were obtained as infrared emission from the fundamental and overtone vibrational band systems (in some of the experiments the two-band systems were recorded simultaneously). The data are consistent with present theories for the vibrational relaxation of diatomic molecules and can be interpreted in terms of an initial Boltzmann vibrational distribution relaxing toward final equilibrium via a continuous sequence of intermediate Boltzmann distributions.

Chackerian, C., Jr.↗
NASA NTRS1974

The response of rotating machinery to external random vibration

A high-speed turbogenerator employing gas-lubricated hydrodynamic journal and thrust bearings was subjected to external random vibrations for the purpose of assessing bearing performance in a dynamic environment. The pivoted-pad type journal bearings and the step-sector thrust bearing supported a turbine-driven rotor weighing approximately twenty-one pounds at a nominal operating speed of 36,000 rpm. The response amplitudes of both the rigid-supported and flexible-supported bearing pads, the gimballed thrust bearing, and the rotor relative to the machine casing were measured with capacitance type displacement probes. Random vibrations were applied by means of a large electrodynamic shaker at input levels ranging between 0.5 g (rms) and 1.5 g (rms). Vibrations were applied both along and perpendicular to the rotor axis. Response measurements were analyzed for amplitude distribution and power spectral density. Experimental results compare well with calculations of amplitude power spectral density made for the case where the vibrations were applied along the rotor axis. In this case, the rotor-bearing system was treated as a linear, three-mass model.

Tessarzik, J. M.↗
NASA NTRS1974

A comparison of acoustic and random vibration testing of spacecraft

Before selecting the most suitable testing technique in a particular case, it has to be considered which of the two methods duplicates better the distribution of vibration responses to be expected during the actual launch phase. An investigation is conducted of the case of a large, low density spacecraft launched by a vehicle which produces significant acoustic noise and transmits relatively little vibration through the mechanical path provided by the vehicle structure in the area of the spacecraft interface. Criteria for vibration-acoustic equivalence are discussed along with tests conducted with the Synchronous Meteorological Satellite, the Radio Astronomy Explorer, and the Orbiting Geophysical Spacecraft. The investigation indicates that the vibration test is generally a poor substitute for an acoustic study.-

Bangs, W. F.↗
NASA NTRS1974

Hingeless rotor theory and experiment on vibration reduction by periodic variation of conventional controls

A preliminary evaluation is made of the concept of vibration reduction by properly selected oscillatory collective and cyclic control applications. The investigations are based on experimental frequency response data covering advance ratios from approximately 0.2 to 0.85. Because there was no instrumentation for the measurement of the pitch and roll vibrations, these values were obtained by properly adding up the flap-bending moments at 3.3 in. Any other quantity representing pitch/roll vibrations can be compensated for in the same fashion. The calculated control inputs required for vibration reduction stay within acceptable limits. For four of the five conditions tested they are smaller than the values used for the frequency response tests. As to be expected, the compensating controls greatly affect the blade loads, i.e., torsion, flap- and chordwise bending.

Sissingh, G. J.↗
NASA NTRS1975

Hot vibrating white dwarf models of pulsating X-ray sources

The hypothesis that pulsating X-ray sources could be vibrating white dwarfs is investigated. The masses are calculated for several white-dwarf models having various modes of vibration which have the observed eigenfrequencies of the Centaurus X-3 and the Hercules X-1 sources. If the hypothesis is correct, Cen X-3 is vibrating radially in the fundamental mode or not higher than the first two overtones, and its mass is in the range 0.7-1.2 solar masses. The Her X-1 source would be vibrating in a quadrupole P mode, and would have a mass in the range 1.1-1.25 solar masses.

Cameron, A. G. W.↗
NASA NTRS1975

Nonlinear vibration of cylindrical shells

The large amplitude vibration of a thin-walled cylindrical shell is analyzed. A perturbation method is used to solve the steady-state forced vibration problem. The simply-supported boundary conditions and the circumferential periodicity condition are satisfied. The resulting solution indicates that in addition to the fundamental mode, the response contains asymmetric modes as well as axisymmetric modes with the frequency twice that of the fundamental mode. Vibrations involving a single driven mode response are investigated. The results indicate that the nonlinearity is either softening or hardening depending on the mode. The vibrations involving both a driven mode and a companion mode are also investigated. An experimental investigation is conducted, and the results are in qualitative agreement with the theory. 'Nonstationary' response is detected at some frequencies for large amplitude response in which the amplitude drifts from one value to another. Various nonlinear phenomena are observed and comparisons with the theoretical results are made.

Chen, J. C.↗