SEARCH · Search NASA

Results for “WRF”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS2015

High-Resolution Mesoscale Model Setup for the Eastern Range and Wallops Flight Facility

Mesoscale weather conditions can have an adverse effect on space launch, landing, ground processing, and weather advisories, watches, and warnings at the Eastern Range (ER) in Florida and Wallops Flight Facility (WFF) in Virginia. During summer, land-sea interactions across Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS) lead to sea breeze front formation, which can spawn deep convection that can hinder operations and endanger personnel and resources. Many other weak locally-driven low-level boundaries and their interactions with the sea breeze front and each other can also initiate deep convection in the KSC/CCAFS area. These convective processes often last 60 minutes or less and pose a significant challenge to the local forecasters. Surface winds during the transition seasons (spring and fall) pose the most difficulties for the forecasters at WFF. They also encounter problems forecasting convective activity and temperature during those seasons. Therefore, accurate mesoscale model forecasts are needed to better forecast a variety of unique weather phenomena. Global and national scale models cannot properly resolve important local-scale weather features at each location due to their horizontal resolutions being much too coarse. Therefore, a properly tuned local data assimilation (DA) and forecast model at a high resolution is needed to provide improved capability. To accomplish this, a number of sensitivity tests were performed using the Weather Research and Forecasting (WRF) model in order to determine the best DA/model configuration for operational use at each of the space launch ranges to best predict winds, precipitation, and temperature. A set of Perl scripts to run the Gridpoint Statistical Interpolation (GSI)/WRF in real-time were provided by NASA's Short-term Prediction Research and Transition Center (SPoRT). The GSI can analyze many types of observational data including satellite, radar, and conventional data. The GSI/WRF scripts use a cycled GSI system similar to the operational North American Mesoscale (NAM) model. The scripts run a 12-hour pre-cycle in which data are assimilated from 12 hours prior up to the model initialization time. A number of different model configurations were tested for both the ER and WFF by varying the horizontal resolution on which the data assimilation was done. Three different grid configurations were run for the ER and two configurations were run for WFF for archive cases from 27 Aug 2013 through 10 Nov 2013. To quantify model performance, standard model output will be compared to the Meteorological Assimilation Data Ingest System (MADIS) data. The MADIS observation data will be compared to the WRF forecasts using the Model Evaluation Tools (MET) verification package. In addition, the National Centers for Environmental Prediction's Stage IV precipitation data will be used to validate the WRF precipitation forecasts. The author will summarize the relative skill of the various WRF configurations and how each configuration behaves relative to the others, as well as determine the best model configuration for each space launch range.

Watson, Leela R.↗

NASA NTRS2016

Transitioning Enhanced Land Surface Initialization and Model Verification Capabilities to the Kenya Meteorological Department (KMD)

Flooding, severe weather, and drought are key forecasting challenges for the Kenya Meteorological Department (KMD), based in Nairobi, Kenya. Atmospheric processes leading to convection, excessive precipitation and/or prolonged drought can be strongly influenced by land cover, vegetation, and soil moisture content, especially during anomalous conditions and dry/wet seasonal transitions. It is thus important to represent accurately land surface state variables (green vegetation fraction, soil moisture, and soil temperature) in Numerical Weather Prediction (NWP) models. The NASA SERVIR and the Short-term Prediction Research and Transition (SPoRT) programs in Huntsville, AL have established a working partnership with KMD to enhance its regional modeling capabilities. SPoRT and SERVIR are providing experimental land surface initialization datasets and model verification capabilities for capacity building at KMD. To support its forecasting operations, KMD is running experimental configurations of the Weather Research and Forecasting (WRF; Skamarock et al. 2008) model on a 12-km/4-km nested regional domain over eastern Africa, incorporating the land surface datasets provided by NASA SPoRT and SERVIR. SPoRT, SERVIR, and KMD participated in two training sessions in March 2014 and June 2015 to foster the collaboration and use of unique land surface datasets and model verification capabilities. Enhanced regional modeling capabilities have the potential to improve guidance in support of daily operations and high-impact weather and climate outlooks over Eastern Africa. For enhanced land-surface initialization, the NASA Land Information System (LIS) is run over Eastern Africa at ~3-km resolution, providing real-time land surface initialization data in place of interpolated global model soil moisture and temperature data available at coarser resolutions. Additionally, real-time green vegetation fraction (GVF) composites from the Suomi-NPP VIIRS instrument is being incorporated into the KMD-WRF runs, using the product generated by NOAA/NESDIS. Model verification capabilities are also being transitioned to KMD using NCAR's Model *Corresponding author address: Jonathan Case, ENSCO, Inc., 320 Sparkman Dr., Room 3008, Huntsville, AL, 35805. Email: Jonathan.Case-1@nasa.gov Evaluation Tools (MET; Brown et al. 2009) software in conjunction with a SPoRT-developed scripting package, in order to quantify and compare errors in simulated temperature, moisture and precipitation in the experimental WRF model simulations. This extended abstract and accompanying presentation summarizes the efforts and training done to date to support this unique regional modeling initiative at KMD. To honor the memory of Dr. Peter J. Lamb and his extensive efforts in bolstering weather and climate science and capacity-building in Africa, we offer this contribution to the special Peter J. Lamb symposium. The remainder of this extended abstract is organized as follows. The collaborating international organizations involved in the project are presented in Section 2. Background information on the unique land surface input datasets is presented in Section 3. The hands-on training sessions from March 2014 and June 2015 are described in Section 4. Sample experimental WRF output and verification from the June 2015 training are given in Section 5. A summary is given in Section 6, followed by Acknowledgements and References.

land surface modeling↗

NASA NTRS2017

The Role of Low-Level, Terrain-Induced Jets in Rainfall Variability in Tigris Euphrates Headwaters

Rainfall variability in the Tigris Euphrates headwaters is a result of interaction between topography and meteorological features at a range of spatial scales. Here, the Weather Research and Forecasting (WRF) Model, driven by the NCEP-DOE AMIP-II reanalysis (R-2), has been implemented to better understand these interactions. Simulations were performed over a domain covering most of the Middle East. The extended simulation period (1983 - 2013) enables us to study seasonality, interannual variability, spatial variability, and extreme events of rainfall. Results showed that the annual cycle of precipitation produced by WRF agrees much more closely with observations than does R-2. This was particularly evident during the transition months of April and October, which were further examined to study the underlying physical mechanisms. In both months, WRF improves representation of interannual variability relative to R-2, with a substantially larger benefit in April. This improvement results primarily from WRFs ability to resolve two low-level, terrain-induced flows in the region that are either absent or weak in R-2: one parallel to the western edge of the Zagros Mountains, and one along the east Turkish highlands. The first shows a complete reversal in its direction during wet and dry days, when flowing southeasterly it transports moisture from the Persian Gulf to the region, and when flowing northwesterly it blocks moisture and transports it away from the region. The second is more directly related to synoptic-scale systems and carries moist, warm air from the Mediterranean and Red Seas toward the region. The combined contribution of these flows explains about 50 of interannual variability in both WRF and observations for April and October precipitation.

rainfall variability↗

NASA NTRS2020

Object-Based Comparison of Data-Driven and Physics-Driven Satellite Estimates of Extreme Rainfall

The Global Precipitation Measurement (GPM) constellation of spaceborne sensors provides a variety of direct and indirect measurements of precipitation processes. Such observations can be employed to derive spatially and temporally consistent gridded precipitation estimates either via data-driven retrieval algorithms or by assimilation into physically based numerical weather models. We compare the data-driven Integrated Multisatellite Retrievals for GPM (IMERG) and the assimilation-enabled NASA-Unified Weather Research and Forecasting (NU-WRF) model against Stage IV reference precipitation for four major extreme rainfall events in the southeastern United States using an object-based analysis framework that decomposes gridded precipitation fields into storm objects. As an alternative to conventional ‘‘grid-by-grid analysis,’’ the object-based approach provides a promising way to diagnose spatial properties of storms, trace them through space and time, and connect their accuracy to storm types and input data sources. The evolution of two tropical cyclones are generally captured by IMERG and NU-WRF, while the less organized spatial patterns of two mesoscale convective systems pose challenges for both. NU-WRF rain rates are generally more accurate, while IMERG better captures storm location and shape. Both show higher skill in detecting large, intense storms compared to smaller, weaker storms. IMERG’s accuracy depends on the input microwave and infrared data sources; NU-WRF does not appear to exhibit this dependence. Findings highlight that an object-oriented view can provide deeper insights into satellite precipitation performance and that the satellite precipitation community should further explore the potential for ‘‘hybrid’’ data-driven and physics-driven estimates in order to make optimal usage of satellite observations.

extreme events↗

DOE OSTI2023

Developing a 20-year high-resolution wind data set for Puerto Rico

The purpose of this study is to develop a high-resolution wind resource data set for Puerto Rico as part of the wind resource assessment in the Puerto Rico Grid Resilience and Transition to 100 % Renewable Energy Study (PR100) project. The Weather and Research and Forecasting (WRF) is used to model 20-years (2001-2020) of wind resource data on a 3-km grid for the Puerto Rico region. Because accurately representing the planetary boundary layer (PBL)-physics in the WRF is key to accurately model low-level wind speed, 11 different PBL schemes are examined and evaluated to find a WRF configuration that can provide the most accurate wind data. The modeled wind speeds are validated with buoy observations, and the Shin-Hong PBL scheme is selected to generate the final wind data set. Here, the overall results demonstrate that the high-resolution data correctly represents the climate of Puerto Rico (e.g., a dominant easterly trade wind). At 160 m above ground, the southern regions of Puerto Rico show strong offshore wind speed (>8 m/s on average) throughout the daytime and nighttime. For land-based wind, average wind speed ranges from 5 m/s-7 m/s during daytime, whereas notable high wind speeds (>9 m/s) appear in the mountain regions during nighttime.

17 WIND ENERGY↗

DOE OSTI2022

A Machine‐Learning‐Assisted Stochastic Cloud Population Model as a Parameterization of Cumulus Convection

Abstract A machine‐learning‐assisted stochastic cloud population model is coupled with the Advanced Research Weather Research and Forecasting (WRF) model to represent fluctuations in the cloud‐base mass flux associated with the life cycles and interactions among cumulus convection cells. In this cloud population model, the size distribution and the associated cloud‐base mass flux of the convective cells are related to their previous state and to the change in the total convective area via a transition function. The convective area tendency in turn is assumed to depend on the cloud‐base mass flux that is resolved by the host WRF model. The transition function is represented by a single hidden‐layer neural network trained by the evolution of convective cell size distributions in a 1‐km grid‐spacing WRF simulation run over the Australian Monsoon region. At every grid point of the host model, the cloud population model predicts the cell size and cloud‐base mass flux distributions from which a random sample of cells is fed to an entraining parcel model that calculates precipitation as well as the associated liquid water potential temperature and total moisture tendencies. These tendencies are averaged over the cells and provided to the host model. Several regional simulations are performed over tropical and midlatitude domains to test this as a potential approach to scale‐aware parameterization. It is shown that such an approach could be a new promising path to simulating realistic precipitation statistics and propagation of precipitation associated with the Madden‐Julian Oscillation while maintaining realistic depictions of the diurnal cycle over both land and ocean.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Data and scripts associated with “Sequential Precipitation Input Tagging (SPIT) to Estimate Water Transit Times and Hydrologic Tracer Dynamics within Water-Tagging Enabled Hydrologic Models” (v3)

This data package is associated with the publication “Sequential Precipitation Input Tagging (SPIT) to Estimate Water Transit Times and Hydrologic Tracer Dynamics within Water-Tagging Enabled Hydrologic Models” submitted to Journal of Advances in Modeling Earth Systems (Butler et al. 2025). This study developed the Sequential Precipitation Input Tagging (SPIT) framework to tag input precipitation and estimate water transit times and hydrologic tracers. SPIT tags all precipitation events at regular intervals over an extended period (monthly tags over seven years) in a hydrologic model from 2016-2022. SPIT is applied at six National Ecological Observatory Network (NEON) sites across the continental United States to calculate transit time distributions (TTD) and derive from these mean transit times (MTT), fractions of young water (Fyw), and hydrologic tracer concentrations in stream water (δ18O) within a water-tagging enabled version of the Weather Research and Forecast (WT-WRF-Hydro) model with national water model (NWM) configurations. We go on to validate WT-WRF-Hydro estimates against Butler et al. (2023), who analyzed the same NEON sites using stable water isotope data to estimate water transit times. This new tracking method provides a detailed picture of water movement and helps improve predictions about water availability in the future. This data package was originally published in January 2025. It was updated May 2025 (v2; new and modified files) and October 2025 (v3; new and modified files). File and folder names were not revised to indicate changes. See the change history section in the readme for more details. This data package contains the data and scripts used to develop the SPIT framework WT-WRF-Hydro (Water Tagging Weather Research and Forecasting Hydrologic) model and is associated with the following GitHub repository: https://github.com/zbutler33/SPIT-Framework. This data package contains five parent folders: (1) “Manipulated_outputs”, (2) “Metadata”, (3) “Observed”, (4) “Outputs”, and (5) “Scripts”. Each of these parent folders contains additional subfolders and files. Please see the FLMD (“v*_Butler_2024_WT_WRF_Hydro_flmd.csv”) for a list of all the files contained in this data package and descriptions for each. See the data dictionary (“v*_Butler_2024_WT_WRF_Hydro_dd.csv”) for definitions and units of all of the tabular (files ending in “.csv” and ".tsv") column headers.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

wrfhydro

This dataset contains a continuous WRF-Hydro simulation for the CACTI field campaign. The simulated period is 1-Aug-2018 through 21-Mar-2019 with hourly model output. The simulation is made with two grids that match the two outer LASSO-CACTI grids, with 7.5 km and 2.5 km grid spacings. Forcing data for WRF-Hydro was obtained from the ERA5-Land product. Values from this WRF-Hydro simulation were used to initialize the soil state for each LASSO-CACTI simulation.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2023

Decoupling in the Vertical Shape of HCHO During a Sea Breeze Event: the Effect on Trace Gas Satellite Retrievals and Column-to-Surface Translation

The effect of sea breeze circulation on stratification of the vertical formaldehyde (HCHO) concentration vertical profiles is explored using a regional atmospheric chemical transport model (CTM) for three synoptically stagnant days focused on the east coast of the U.S in June 2018. During this event, a significant thermal contrast between the Atlantic Ocean and the terrestrial regions (12–17 °C), observed by moderate resolution imaging spectroradiometer (MODIS) and well-captured by the WRF-CMAQ model (15–18 °C), is conducive to monsoon-like flow, perpendicular to the shorelines, carrying clean marine air masses over the land within a few hundreds of meters above the surface. In contrast, the westerly continental polluted air masses prevail in higher altitudes. These two conflicting flows result in atypical vertical shapes of HCHO concentrations increasing with altitude. This decoupling pattern is so pronounced that we observe total column HCHO negatively correlate with surface concentrations. Comparisons of an accredited global model, GEOS-CF, to surface wind measurements and MODIS skin temperature indicate its poor representation of the sea breeze timing and strength, resulting in GEOS-CF HCHO vertical shapes being drastically different from the WRF-CMAQ. Based on radiative transfer calculations, the differences in the vertical distribution of HCHO between the WRF-CMAQ and that of GEOS-CF in the first 3 km are sufficient to induce a 20–30% error in air mass factors (thus total vertical HCHO column abundances). Through an experiment involving converting HCHO total columns to surface mixing ratios, we demonstrate that GEOS-CF allocates noticeably more HCHO molecules (40–150%) to the surface layer due to the misrepresentation of the vertical shape of HCHO during the sea breeze event. It is known that a significant fraction of the human population lives in coastal areas prone to detrimental effects caused by air pollution, and elevated pollutant concentrations usually occur in synoptically stagnant atmospheric conditions when local circulation patterns come into play; accordingly, our experiments emphasize the importance of the effect a priori profiles can have on satellite-derived applications under such conditions. To ensure that the quantitative representation of satellite-based trace gas retrievals on a daily basis is trustworthy and useable for air quality applications, atmospheric models providing a priori profiles for satellite retrievals should be well-tuned to reproduce complex local circulation such as sea-land breezes.

sea breeze↗

DOE OSTI2021

Quantifying sensitivity in numerical weather prediction-modeled offshore wind speeds through an ensemble modeling approach

A decade of research has shown that numerical weather prediction (NWP)-modeled wind speeds can be highly sensitive to the inputs and setups within the NWP model. For wind resource characterization applications, this sensitivity is often addressed by constructing a range of setups and selecting the one that best validates against observations. However, this approach is not possible in areas that lack high-quality hub height observations, especially offshore wind areas. In such cases, techniques to quantify and disseminate confidence in NWP-modeled wind speeds in the absence of observations are needed. We address this need in the present study and propose best practices for quantifying the spread in NWP-modeled wind speeds. We implement an ensemble approach in which we consider 24 different setups to the Weather Research and Forecasting (WRF) model. We construct the ensemble by considering variations in WRF version, WRF namelist, atmospheric forcing, and sea surface temperature (SST) forcing. Our analysis finds that the standard deviation produces more consistent estimates compared to the interquartile range and tends to be the more conservative estimator for ensemble variability. We further find that model spread increases closer to the surface and on shorter time scales. In conclusion, we explore methods to attribute total ensemble variability to the different ensemble components (e.g., atmospheric forcing and SST product) and find that contributions by components also vary depending on time scale. We anticipate that the methods and results presented in this paper will provide a reasonable foundation for further research into ensemble-based wind resource data sets.

17 WIND ENERGY↗

DOE OSTI2024

Biochemical and structural characterization of enzymes in the 4-hydroxybenzoate catabolic pathway of lignin-degrading white-rot fungi

White-rot fungi (WRF) are the most efficient lignin-degrading organisms in nature. However, their capacity to use lignin-related aromatic compounds, such as 4-hydroxybenzoate, as carbon sources has only been described recently. Previously, the hydroxyquinol pathway was proposed for the bioconversion of these compounds in fungi, but gene- and structure-function relationships of the full enzymatic pathway remain uncharacterized in any single fungal species. Here, we characterize seven enzymes from two WRF, Trametes versicolor and Gelatoporia subvermispora, which constitute a four-enzyme cascade from 4-hydroxybenzoate to β-ketoadipate via the hydroxyquinol pathway. Furthermore, we solve the crystal structure of four of these enzymes and identify mechanistic differences with the closest bacterial and fungal structural homologs. Overall, this research expands our understanding of aromatic catabolism by WRF and establishes an alternative strategy for the conversion of lignin-related compounds to the valuable molecule β-ketoadipate, contributing to the development of biological processes for lignin valorization.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Comparative transcriptomics of CAZy enzymes in white- and brown-rot agaricomycetes: Evolutionary insights into lignocellulose degradation and the relevance of GH16 glycoside hydrolase functional divergence

White-rot and brown-rot fungi (WRF and BRF, respectively) decompose lignocellulose, the main structural component of plant biomass, through distinct mechanisms. This study examines the transcriptomic responses of three WRF species (Pleurotus ostreatus, Phanerochaete chrysosporium, and Heterobasidion irregulare) and two BRF species (Fomitopsis schrenkii and Rhodonia placenta) grown on poplar wood (W) and glucose (G) as sole carbon sources. RNA-seq analysis revealed upregulation of carbohydrate-active enzymes (CAZymes) linked to lignocellulose degradation. WRF displayed a broader enzymatic repertoire, whereas BRF employed a more selective approach. Among these responses, GH16 glycoside hydrolases were consistently upregulated across all species, including BRF. Since GH16 enzymes are involved in both plant hemicellulose modification and cell wall remodeling, their wood-induced expression may reflect multiple processes rather than a single conserved wood-decay mechanism. Structural and phylogenetic analyses revealed species-specific divergence, consistent with potential functional specialization. These findings broaden our understanding of fungal enzymatic strategies and highlight GH16 enzymes as candidates for further study. Beyond the immediate context of wood decay, this work has broader implications for fungal ecology, evolutionary biology, and biotechnological applications such as biomass conversion and sustainable bioenergy.

Fungal ecological strategies↗

DOE OSTI2025

Observation and Simulation of Methane Plumes During the Morning Boundary Layer Transition

Abstract Methane (CH 4 ) contributes significantly to global warming. However, accurate identification of CH 4 sources for reducing CH 4 emissions is often hampered by inadequate accuracy and spatiotemporal coverage of CH 4 detection, and lack of accurate CH 4 forward modeling used in top‐down inversion systems. In this study, a field experiment was conducted in Pampa, Texas using two CH 4 sensors (LI‐COR and OGI camera) to detect CH 4 releases. We investigated whether high‐resolution simulations using the Weather Research and Forecasting (WRF) model with greenhouse gases (WRF‐GHG) could accurately simulate the CH 4 plumes in the presence of evolving atmospheric boundary layer from sunrise to noon. CH 4 plumes showed substantial variation in time. At a release rate of ∼17.5 kg hr −1 , the maximum enhancement of CH 4 measured by LI‐COR was 2.6 ppm at sunrise (7:36 a.m.), 250 m from the release location. Within half an hour after sunrise, this enhancement decreased to 0.3–0.4 ppm. The enhancement was 0.2 ppm by 10:00 a.m. and further dropped to less than 0.1 ppm after 11:30 a.m. Due to the low temperature at sunrise, the OGI camera failed to detect the CH 4 plume. The WRF‐GHG large‐eddy simulation (LES) with 32 m grid spacing successfully reproduced these CH 4 enhancements. In situ measurements together with numerical simulations illustrate the impact of the transition from a stable boundary layer in the early morning to a convective boundary layer at noon on the dispersion of CH 4 plumes. Additionally, CH 4 plumes from a cattle farm in Oklahoma are briefly examined using the same modeling approach.

Hu, Xiao‐Ming [Center for Analysis and Prediction ↗

DOE OSTI2025

Evaluating Sea Breezes and Associated Convective Cloud Evolution in the Model Gray Zone

We characterize convective clouds associated with sea‐breeze circulations (SBC) using multi‐agency observations and multi‐case ensemble model simulations. The focus is on assessing convective cloud lifecycle properties and their merging behavior, as well as the environmental conditions they are embedded in, particularly SBC features. In total, 46 SBC days over the Houston‐Galveston region are selected and simulated using the Weather Research and Forecasting (WRF) model at a gray zone scale with a forecast‐like parameterization setup. Advanced techniques, including change‐point detection, a Lagrangian cloud tracking method, and a newly developed cell merging and splitting detection algorithm, are applied and/or developed for this study. Our findings indicate that the WRF model at 1 km grid spacing well represents the thermodynamic conditions over the region, as well as SBC timing and intensity. However, for the associated convective cells, WRF overestimates the 30‐dBZ echo top height, cell area, and maximum radar reflectivity compared to radar observations. This overestimation is potentially due to under‐resolved entrainment processes, an overestimated merging frequency, and the overestimation of updraft intensity. Furthermore, the model exhibits a deficiency in simulating congestus clouds, showing a more rapid transition from shallow to deep convection compared to observed behavior. Moreover, observations indicate stronger, deeper, and wider clouds when merging happens. Conversely, in simulations, the merging process does not necessarily lead to higher or longer‐lived cells, as many cases experience rapid and frequent merging and splitting which may result in more variance in convective updraft velocity during the convection lifetime.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Physics informed deep neural network embedded in a chemical transport model for the Amazon rainforest

Secondary organic aerosols (SOA) are fine particles in the atmosphere, which interact with clouds, radiation and affect the Earth’s energy budget. SOA formation involves chemistry in gas phase, aqueous aerosols, and clouds. Simulating these chemical processes involve solving a stiff set of differential equations, which are computationally expensive steps for three-dimensional chemical transport models. Deep neural networks (DNNs) are universal function approximators that could be used to represent the complex nonlinear changes in aerosol physical and chemical processes; however, key challenges such as generalizability to extended time periods, preservation of mass balance, simulating sparse model outputs, and maintaining physical constraints have limited their use in atmospheric chemistry. Here, we develop an approach of using a physics-informed DNN that overcomes previous such challenges and demonstrates its applicability for the chemical formation processes of isoprene epoxydiol SOA (IEPOX-SOA) over the Amazon rainforest. The DNN is trained with data generated by simulating IEPOX-SOA over the entire atmospheric column, using the Weather Research and Forecasting Model coupled with Chemistry (WRF-Chem). The trained DNN is then embedded within WRF-Chem to replace the computationally expensive default solver of IEPOX-SOA formation. The trained DNN predictions generalizes well with the default model simulation of the IEPOX-SOA mass concentrations and its size distribution (20 size bins) over several days of simulations in both dry and wet seasons. The embedded DNN reduces the computational expense of WRF-Chem by a factor of 2. Our approach shows promise in terms of application to other computationally expensive chemistry solvers in climate models.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Projecting Future Energy Production from Operating Wind Farms in North America. Part I: Dynamical Downscaling

Abstract New simulations at 12-km grid spacing with the Weather and Research Forecasting (WRF) Model nested in the MPI Earth System Model (ESM) are used to quantify possible changes in wind power generation potential as a result of global warming. Annual capacity factors (CF; measures of electrical power production) computed by applying a power curve to hourly wind speeds at wind turbine hub height from this simulation are also used to illustrate the pitfalls in seeking to infer changes in wind power generation directly from low-spatial-resolution and time-averaged ESM output. WRF-derived CF are evaluated using observed daily CF from operating wind farms. The spatial correlation coefficient between modeled and observed mean CF is 0.65, and the root-mean-square error is 5.4 percentage points. Output from the MPI-WRF Model chain also captures some of the seasonal variability and the probability distribution of daily CF at operating wind farms. Projections of mean annual CF (CF A ) indicate no change to 2050 in the southern Great Plains and Northeast. Interannual variability of CF A increases in the Midwest, and CF A declines by up to 2 percentage points in the northern Great Plains. The probability of wind droughts (extended periods with anomalously low production) and wind bonus periods (high production) remains unchanged over most of the eastern United States. The probability of wind bonus periods exhibits some evidence of higher values over the Midwest in the 2040s, whereas the converse is true over the northern Great Plains. Significance Statement Wind energy is playing an increasingly important role in low-carbon-emission electricity generation. It is a “weather dependent” renewable energy source, and thus changes in the global atmosphere may cause changes in regional wind power production (PP) potential. We use PP data from operating wind farms to demonstrate that regional simulations exhibit skill in capturing actual power production. Projections to the middle of this century indicate that over most of North America east of the Rocky Mountains annual expected PP is largely unchanged, as is the probability of extended periods of anomalously high or low production. Any small declines in annual PP are of much smaller magnitude than changes due to technological innovation over the last two decades.

Meteorology & Atmospheric Sciences↗

DOE OSTI2020

Two-Layer Dynamic Recycling Model (2L-DRM): Learning from Moisture Tracking Models of Different Complexity

Atmospheric moisture tracking models are used to identify and quantify sources and sinks of water in the atmospheric branch of the hydrologic cycle. These models are primarily used to investigate the origin of moisture resulting in precipitation for particular regions around the globe. Moisture tracking models vary widely in their level of complexity, depending on the number of physical processes represented. Complex models are comprehensive in their physical representation, but computationally much more expensive than simple models, which only focus on specific physical processes and use simplifying assumptions. We present the mathematical derivation of the new two-layer dynamical recycling model (2L-DRM), a simple analytical moisture tracking model that relaxes the vertically-integrated formulation of the original one-layer DRM (Dominguez et al., 2006). By comparing the simple DRM to a very complex moisture tracking model that uses water vapor tracers embedded within the Weather Research and Forecast regional climate model (WRF-WVT) for the North American Monsoon region, we pinpoint the absence of vertical wind shear as the main deficiency in the simple DRM. When comparing both simple models (DRM and 2L-DRM) to the WRF-WVT (which we treat as ‘truth’), the 2L-DRM better captures the spatial extent, the net amount and the temporal variability of precipitation that originates from oceanic and local terrestrial sources. The 2L-DRM is well suited to study the large-scale climatological sources of moisture, and for these applications, performs on-par with the much more complex and computationally demanding WRF-WVT model.

Dominguez, Francina↗

DOE OSTI2024

Cold-Season Precipitation Sensitivity to Microphysical Parameterizations: Hydrologic Evaluations Leveraging Snow Lidar Datasets

Abstract Cloud microphysical processes are an important facet of atmospheric modeling, as they can control the initiation and rates of snowfall. Thus, parameterizations of these processes have important implications for modeling seasonal snow accumulation. We conduct experiments with the Weather Research and Forecasting (WRF V4.3.3) Model using three different microphysics parameterizations, including a sophisticated new scheme (ISHMAEL). Simulations are conducted for two cold seasons (2018 and 2019) centered on the Colorado Rockies’ ∼750-km 2 East River watershed. Precipitation efficiencies are quantified using a drying-ratio mass budget approach and point evaluations are performed against three NRCS SNOTEL stations. Precipitation and meteorological outputs from each are used to force a land surface model (Noah-MP) so that peak snow accumulation can be compared against airborne snow lidar products. We find that microphysical parameterization choice alone has a modest impact on total precipitation on the order of ±3% watershed-wide, and as high as 15% for certain regions, similar to other studies comparing the same parameterizations. Precipitation biases evaluated against SNOTEL are 15% ± 13%. WRF Noah-MP configurations produced snow water equivalents with good correlations with airborne lidar products at a 1-km spatial resolution: Pearson’s r values of 0.9, RMSEs between 8 and 17 cm, and percent biases of 3%–15%. Noah-MP with precipitation from the PRISM geostatistical precipitation product leads to a peak SWE underestimation of 32% in both years examined, and a weaker spatial correlation than the WRF configurations. We fall short of identifying a clearly superior microphysical parameterization but conclude that snow lidar is a valuable nontraditional indicator of model performance.

54 ENVIRONMENTAL SCIENCES↗