SEARCH · Search NASA

Results for “Weather Applications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS2010

Enhanced Vision for All-Weather Operations Under NextGen

Recent research in Synthetic/Enhanced Vision technology is analyzed with respect to existing Category II/III performance and certification guidance. The goal is to start the development of performance-based vision systems technology requirements to support future all-weather operations and the NextGen goal of Equivalent Visual Operations. This work shows that existing criteria to operate in Category III weather and visibility are not directly applicable since, unlike today, the primary reference for maneuvering the airplane is based on what the pilot sees visually through the "vision system." New criteria are consequently needed. Several possible criteria are discussed, but more importantly, the factors associated with landing system performance using automatic and manual landings are delineated.

Bailey, Randall E.↗

NASA NTRS2012

Dual-Doppler Feasibility Study

When two or more Doppler weather radar systems are monitoring the same region, the Doppler velocities can be combined to form a three-dimensional (3-D) wind vector field thus providing for a more intuitive analysis of the wind field. A real-time display of the 3-D winds can assist forecasters in predicting the onset of convection and severe weather. The data can also be used to initialize local numerical weather prediction models. Two operational Doppler Radar systems are in the vicinity of Kennedy Space Center (KSC) and Cape Canaveral Air Force Station (CCAFS); these systems are operated by the 45th Space Wing (45 SW) and the National Weather Service Melbourne, Fla. (NWS MLB). Dual-Doppler applications were considered by the 45 SW in choosing the site for the new radar. Accordingly, the 45th Weather Squadron (45 WS), NWS MLB and the National Aeronautics and Space Administration tasked the Applied Meteorology Unit (AMU) to investigate the feasibility of establishing dual-Doppler capability using the two existing systems. This study investigated technical, hardware, and software requirements necessary to enable the establishment of a dual-Doppler capability. Review of the available literature pertaining to the dual-Doppler technique and consultation with experts revealed that the physical locations and resulting beam crossing angles of the 45 SW and NWS MLB radars make them ideally suited for a dual-Doppler capability. The dual-Doppler equations were derived to facilitate complete understanding of dual-Doppler synthesis; to determine the technical information requirements; and to determine the components of wind velocity from the equation of continuity and radial velocity data collected by the two Doppler radars. Analysis confirmed the suitability of the existing systems to provide the desired capability. In addition, it is possible that both 45 SW radar data and Terminal Doppler Weather Radar data from Orlando International Airport could be used to alleviate any radar geometry issues at the NWS MLB radar, such as the "cone of silence" or beam blockage. In the event of a radar outage at one of the sites, the multi-radar algorithms would provide continuing coverage of the area through use of the data from the remaining operational radar sites. There are several options to collect, edit, synthesize and display dual-Doppler data sets. These options include commercial packages available for purchase and a variety of freeware packages available from the National Center for Atmospheric Research (NCAR) for processing raw radar data. However, evaluation of the freeware packages revealed that they do not have sufficient documentation and configuration control to be certified for 45 SW use. Additionally, a TI data line must be installed/leased from the NWS MLB office and CCAFS to enable the receipt of NWS MLB raw radar data to use in the dual-Doppler synthesis. Integration of the TI data line into the Eastern Range infrastructure that will meet the security requirements necessary for 45 SW use is time-consuming and costly. Overall evaluation indicates that establishment of the dual-Doppler capability using the existing operational radar systems is desirable and feasible with no technical concerns. Installation of such a system represents a significant enhancement to forecasting capabilities at the 45 WS and at NWS MLB. However, data security and cost considerations must be evaluated in light of current budgetary constraints. In any case, gaining the dual-Doppler capability will provide opportunities for better visualization of the wind field and better forecasting of the onset of convection and severe weather events to support space launch operations at KSC and CCAFS.

Huddleston, Lisa L.↗

NASA NTRS2014

Virtual Machine Language Controls Remote Devices

Kennedy Space Center worked with Blue Sun Enterprises, based in Boulder, Colorado, to enhance the company's virtual machine language (VML) to control the instruments on the Regolith and Environment Science and Oxygen and Lunar Volatiles Extraction mission. Now the NASA-improved VML is available for crewed and uncrewed spacecraft, and has potential applications on remote systems such as weather balloons, unmanned aerial vehicles, and submarines.

Source record↗

NASA NTRS2015

Layered Thermal Insulation Systems for Industrial and Commercial Applications

From the high performance arena of cryogenic equipment, several different layered thermal insulation systems have been developed for industrial and commercial applications. In addition to the proven areas in cold-work applications for piping and tanks, the new Layered Composite Insulation for Extreme Environments (LCX) has potential for broader industrial use as well as for commercial applications. The LCX technology provides a unique combination of thermal, mechanical, and weathering performance capability that is both cost-effective and enabling. Industry applications may include, for example, liquid nitrogen (LN2) systems for food processing, liquefied natural gas (LNG) systems for transportation or power, and chilled water cooling facilities. Example commercial applications may include commercial residential building construction, hot water piping, HVAC systems, refrigerated trucks, cold chain shipping containers, and a various consumer products. The LCX system is highly tailorable to the end-use application and can be pre-fabricated or field assembled as needed. Product forms of LCX include rigid sheets, semi-flexible sheets, cylindrical clam-shells, removable covers, or flexible strips for wrapping. With increasing system control and reliability requirements as well as demands for higher energy efficiencies, thermal insulation in harsh environments is a growing challenge. The LCX technology grew out of solving problems in the insulation of mechanically complex cryogenic systems that must operate in outdoor, humid conditions. Insulation for cold work includes equipment for everything from liquid helium to chilled water. And in the middle are systems for LNG, LN2, liquid oxygen (LO2), liquid hydrogen (LH2) that must operate in the ambient environment. Different LCX systems have been demonstrated for sub-ambient conditions but are capable of moderately high temperature applications as well.

thermal conductivity↗

NASA NTRS2018

Climate Reanalysis: Progress and Future Prospects

Reanalysis is the process whereby an unchanging data assimilation system is used to provide a consistent reprocessing of observations, typically spanning an extended segment of the historical data record. The process relies on an underlying model to combine often-disparate observations in a physically consistent manner, enabling production of gridded data sets for a broad range of applications including the study of historical weather events, preparation of climatologies, business sector development and, more recently, climate monitoring. Over the last few decades, several generations of reanalyses of the global atmosphere have been produced by various operational and research centers, focusing more or less on the period of regular conventional and satellite observations beginning in the mid to late twentieth century. There have also been successful efforts to extend atmospheric reanalyses back to the late nineteenth and early twentieth centuries, using mostly surface observations. Much progress has resulted from (and contributed to) advancements in numerical weather prediction, especially improved models and data assimilation techniques, increased computing capacity, the availability of new observation types and efforts to recover and improve the quality of historical ones. The recent extension of forecast systems that allow integrated modeling of meteorological, oceanic, land surface, and chemical variables provide the basic elements for coupled data assimilation. This has opened the door to the development of a new generation of coupled reanalyses of the Earth system, or integrated Earth system analyses (IESA). Evidence so far suggests that this approach can improve the analysis of currently uncoupled components of the Earth system, especially at their interface, and lead to increased predictability. However, extensive analysis coupling as envisioned for IESA, while progressing, still presents significant challenges. These include model biases that can be exacerbated when coupled, component systems with different physical characteristics and different spatial and temporal scales, and component observations in different media with different spatial and temporal frequencies and different latencies. Quantification of uncertainty in reanalyses is also a critical challenge and is important for expanding their utility as a tool for climate change assessment. This talk provides a brief overview of the progress of reanalysis development during recent decades, and describes remaining challenges in the progression toward coupled Earth system reanalyses.

IES↗

NASA NTRS2017

Workshop on Using NASA Data for Time-Sensitive Applications

Over the past decade, there has been an increase in the use of NASA's Earth Observing System (EOS) data and imagery for time-sensitive applications such as monitoring wildfires, floods, and extreme weather events. In September 2016, NASA sponsored a workshop for data users, producers, and scientists to discuss the needs of time-sensitive science applications.

Davies, Diane K.↗

NASA NTRSDate not supplied

NASA SPoRT-Land Information System and Vegetation Stress Real-Time Products for Drought, Wildfire, and Pluvial Analysis

The NASA SPoRT Center has been producing a near real-time instance of the NASA Land Information System over a CONUS domain (hereafter “SPoRT-LIS”) since ~2015. The SPoRT-LIS runs the legacy Noah LSM in an observations-constrained manner, with outputs of soil moisture and temperature at layered depths along with surface energy fluxes. The unique configuration of SPoRT-LIS enables decision-making on operational timescales since it incorporates near real-time observations such as VIIRS Green Vegetation Fraction and MRMS QPE. An additional in-house Alaska-LIS is produced in real time to help inform end-users on spring snow melt and summer soil moisture trends during the wildfire season. Use of the SPoRT-LIS has gradually expanded in recent years as a component of drought analysis, feedback to the USDM, and is utilized by State Climate Offices. Operational feedback has led to increased applicability for analyses by other end-users in the drought community. This presentation will provide SPoRT-LIS applications for drought, pluvial, and fire weather case-studies. We will also present preliminary results of 2-week SPoRT-LIS forecast percentiles that were recently implemented using GFS model forecast fields. We will additionally discuss the pathway toward extending these forecasts into the future by incorporating ensemble forecasts for probabilistic guidance on soil moisture trends for potential flash drought and subseasonal outlooks.

Soil Moisture↗

NASA NTRSDate not supplied

Making NASA GES DISC Level 2 Data GIS Analysis Ready

There are many valuable data hosted by NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) for GIS applications in the areas of extreme weather events, climatic anomaly, and public health. However, using NASA Earth Science Data poses some challenges for GIS users. Many of these users are not experts in Earth Observation and have little knowledge about NASA's Earth science data. In the GIS community, GeoTiff is the most widely used raster format, whereas NASA's data is primarily in complex multidimensional netCDF and HDF formats. This complexity makes it difficult for GIS users, especially those who are unfamiliar with these formats. Although GIS software like ArcGIS has made progress in processing multidimensional netCDF data, certain issues still remain, particularly with level 2 data. In this study, we use TROPSpheric Monitoring instrument (TROPOMI) level 2 data as an example to demonstrate how to make such data GIS analysis ready. The process involves: 1. Creating a feature layer from the TROPOMI level 2 data. 2. Converting the feature layer to a gridded raster dataset. 3. Mosaicking gridded raster datasets into a raster dataset covering the entire desired extent. 4. Generating a symbology with a GIBS-specific style that aligns with the visual standards and requirements of GIBS. 5. Publishing image services. By performing these preprocessing and transformation steps, NASA level 2 data can be made compatible and ready for use within GIS software for various spatial analysis and visualization tasks.

Geographic Information System↗

NASA NTRSDate not supplied

On-Orbit Calibration Assessment of NOAA-21 VIIRS Thermal Emissive Bands and Implications for JPSS-4 VIIRS

The Visible Infrared Imaging Radiometer Suite (VIIRS) instrument onboard the NOAA-21 (N21) satellite has been successfully operating for over three years collecting valuable scientific measurements. A large suite of weather forecasting models and scientific research applications are supported with the VIIRS measurements from N21 combined with those acquired from the VIIRS instrument onboard the S-NPP and NOAA-20 spacecraft. Among the 22 VIIRS spectral bands, there are seven thermal emissive bands (TEB) covering the 3.7 to 12.2 µm spectral range at two different spatial resolutions. The VIIRS TEB detectors are calibrated onboard using a blackbody at a controlled temperature and a space view for background signal measurement. In this paper, we discuss the on-orbit performance of the N21 VIIRS TEB using various parameters such as the detector gain, noise, and offset. This on-orbit assessment provides critical insights into instrument behavior and calibration performance that will inform pre-launch testing and post-launch validation strategies for the upcoming JPSS-4 VIIRS mission scheduled for launch in 2027. The methodologies and lessons learned from characterizing the N21 TEB performance will enable more efficient and comprehensive radiometric assessment of the next VIIRS instrument. Specific focus is placed on identifying performance trends and anomaly signatures observed during the N21 commissioning phase that can enhance the JPSS4 instrument checkout procedures and accelerate the transition to routine on-orbit operations. The established performance baselines and uncertainty estimates will serve as an acceptance criterion for the JPSS-4 commissioning activities, ensuring mission readiness and data continuity for operational users.

Amit Angal↗

NASA NTRS1977

The Role of Aerospace Technology in Agriculture. The 1977 Summer Faculty Fellowship Program in Engineering Systems Design

Possibilities were examined for improving agricultural productivity through the application of aerospace technology. An overview of agriculture and of the problems of feeding a growing world population are presented. The present state of agriculture, of plant and animal culture, and agri-business are reviewed. Also analyzed are the various systems for remote sensing, particularly applications to agriculture. The report recommends additional research and technology in the areas of aerial application of chemicals, of remote sensing systems, of weather and climate investigations, and of air vehicle design. Also considered in detail are the social, legal, economic, and political results of intensification of technical applications to agriculture.

Source record↗

NASA NTRS2000

Issues Involved in the Development of an Open Standard for Data Link of Aviation Weather Information

This paper describes how an effective and efficient data link system for the dissemination of aviation weather information could be constructed. The system is built upon existing 'open standard' foundations drawn from current aviation and computer technologies. Issues of communications protocols and application data formats are discussed. The proposed aviation weather data link system is dependent of the actual link mechanism selected.

Grappel, R. D.↗

NASA NTRS2005

Analysis of Multiple Precipitation Products and Preliminary Assessment of Their Impact on Global Land Data Assimilation System (GLDAS) Land Surface States

Land surface models (LSMs) are computer programs, similar to weather and climate prediction models, which simulate the stocks and fluxes of water (including soil moisture, snow, evaporation, and runoff) and energy (including the temperature of and sensible heat released from the soil) after they arrive on the land surface as precipitation and sunlight. It is not currently possible to measure all of the variables of interest everywhere on Earth with sufficient accuracy and space-time resolution. Hence LSMs have been developed to integrate the available observations with our understanding of the physical processes involved, using powerful computers, in order to map these stocks and fluxes as they change in time. The maps are used to improve weather forecasts, support water resources and agricultural applications, and study the Earth's water cycle and climate variability. NASA's Global Land Data Assimilation System (GLDAS) project facilitates testing of several different LSMs with a variety of input datasets (e.g., precipitation, plant type). Precipitation is arguably the most important input to LSMs. Many precipitation datasets have been produced using satellite and rain gauge observations and weather forecast models. In this study, seven different global precipitation datasets were evaluated over the United States, where dense rain gauge networks contribute to reliable precipitation maps. We then used the seven datasets as inputs to GLDAS simulations, so that we could diagnose their impacts on output stocks and fluxes of water. In terms of totals, the Climate Prediction Center (CPC) Merged Analysis of Precipitation (CMAP) had the closest agreement with the US rain gauge dataset for all seasons except winter. The CMAP precipitation was also the most closely correlated in time with the rain gauge data during spring, fall, and winter, while the satellitebased estimates performed best in summer. The GLDAS simulations revealed that modeled soil moisture is highly sensitive to precipitation, with differences in spring and summer as large as 45% depending on the choice of precipitation input.

Gottschalck, Jon↗

NASA NTRSDate not supplied

Visualization of Near Real-Time Global Cloud Composites (GCC): Integration in ArcGIS

The NASA Langley Satellite ClOud and Radiation Property retrieval System (SatCORPS) team provides low latency LEO and GEO satellite derived cloud and radiation products to end users for use in near real-time (NRT) applications. Hourly mosaics are fused from LEO (SNPP, JPSS-1, AQUA, MODIS) and GEO Satellite imagers (GOES-West, GOES-East, Metesat-11, Metesat-8, and Himawari-8) to create global cloud composites (GCC). SatCORPS GCC data are integrated into Esri ArcGIS system and transformed into Analysis Rady Data (ARD) to provide more efficient data access to support disaster management, weather diagnoses/forecasting, and Earth Sciences remote sensing applications. GCC data are exposed as RESTful APIs, ArcGIS Image Services, and Open Geospatial Consortium (OGC) Web Mapping Services/Web Coverage Services to provide a variety of end points for integration into user applications. We will preview the new interactive SatCORPS GCC web visualization tool and discuss initial integration of GCC product into NASA Airborne Mission Tool Suite (MTS) to support NASA and NOAA field campaigns.

GIS↗

NASA NTRS1973

ERTS-1 evaluation of natural resources management applications in the Great Basin

The relatively cloud free weather in the Great Basin has allowed the accumulation of several dates of excellent ERTS-1 imagery. Mountains, valleys, playas, stream courses, canyons, alluvial fans, and other landforms are readily delineated on ERTS-1 imagery, particularly with MSS-5. Each band is useful for identifying and studying one or more natural resource features. For example, crested wheatgrass seedings were most easily identified and measured on MSS-7. Color enhancements simulating CIR were useful for depicting meadow and phreatophytic vegetation along water bodies and stream courses. Work is underway to inventory and monitor wildfire areas by age and successional status. Inventories have been completed on crested wheatgrass seedings over the entire State of Nevada, and inventories of playa surfaces, water surfaces, phreatophytic vegetation, snow cover, meadows, and other features is continuing. Vegetation ecotones are being delineated for vegetation mapping. The pinyon/juniper-northern desert shrub ecotone has been identified with considerable success. Phenology changes can be used to describe vegetation changes for management.

Tueller, P. T.↗

NASA NTRS1993

Techniques and resources for storm-scale numerical weather prediction

The topics discussed include the following: multiscale application of the 5th-generation PSU/NCAR mesoscale model, the coupling of nonhydrostatic atmospheric and hydrostatic ocean models for air-sea interaction studies; a numerical simulation of cloud formation over complex topography; adaptive grid simulations of convection; an unstructured grid, nonhydrostatic meso/cloud scale model; efficient mesoscale modeling for multiple scales using variable resolution; initialization of cloud-scale models with Doppler radar data; and making effective use of future computing architectures, networks, and visualization software.

Droegemeier, Kelvin↗

NASA NTRSDate not supplied

Importance of Radiative Transfer Models in Atmospheric Remote Sensing

Radiative transfer models (RTMs) play a significant role in the development of satellite instruments for remote sensing applications. These models simulate electromagnetic radiation's propagation through the atmosphere, providing valuable insights into atmosphere-radiation interactions. RTMs facilitate the optimization of satellite instrument designs, ensuring their ability to measure targeted atmospheric and surface properties accurately. Moreover, they aid in simulating instrument’s measurements under various atmospheric conditions, enabling calibration and validation processes to enhance data quality and reliability. RTMs are extensively used in the Observing System Simulation Experiments (OSSE), to generate synthetic observations. By incorporating RTMs into OSSE, we can assess the potential impact of future satellite missions, sensor configurations, and data assimilation techniques. This approach allows for the optimization of satellite instruments and constellations and the evaluation of their influence on weather forecasting, climate monitoring, and other Earth science applications. Another crucial application area of RT models is data assimilation, where they play a fundamental role in combining satellite observations with numerical models to improve atmospheric and environmental predictions. RTMs provide the link between observed radiances and atmospheric parameters, enhancing the accuracy of numerical models and generating more reliable forecasts for weather events, air quality assessments, and climate projections. Moreover, adapting RT models to capture the intricate radiation interactions within the Planetary Boundary Layer will significantly contribute to improving weather forecasting and climate change projections. Current community radiative transfer (RT) models are primarily developed and optimized for operational data assimilation of satellite observations. These models excel at assimilating satellite data into numerical weather prediction models to improve forecast accuracy. However, their focus on data assimilation limits their suitability for other important applications, such as satellite instrument development, OSSE, and Planetary Boundary Layer (PBL) studies. Moreover, for PBL studies, RT models need to be adapted to capture the intricate radiation interactions within this crucial atmospheric layer. Developing RT models that can represent the PBL's unique characteristics, such as surface interactions, will contribute significantly to understanding and predicting weather phenomena, air quality, and climate dynamics. This abstract provides a comprehensive overview of the current status of RT models and highlights their limitations concerning satellite instrument development, OSSE, and PBL studies. Addressing these shortcomings requires concerted efforts to enhance RT models' capabilities and expand their applications beyond data assimilation. By investing in research and development to improve these

Isaac Moradi↗

NASA NTRS1992

Research relative to weather radar measurement techniques

Research relative to weather radar measurement techniques, which involves some investigations related to measurement techniques applicable to meteorological radar systems in Thailand, is reported. A major part of the activity was devoted to instruction and discussion with Thai radar engineers, technicians, and meteorologists concerning the basic principles of radar meteorology and applications to specific problems, including measurement of rainfall and detection of wind shear/microburst hazards. Weather radar calibration techniques were also considered during this project. Most of the activity took place during two visits to Thailand, in December 1990 and February 1992.

Smith, Paul L.↗

NASA NTRS2017

Tropical Processes Applications for CYGNSS

The Cyclone Global Navigation Satellite System (CYGNSS) is focused primarily on observing extreme winds in the inner core of tropical cyclones But... Named storms will occur in view of CYGNSS constellation for only a small percentage of the time on orbit And... Rapid-update, all-weather sampling of wind speeds has many other applications in Tropical Meteorology So... Many potential tropical processes applications for CYGNSS were identified in previous Workshop - Let's revisit some of these possibilities now that the mission is up.

Application↗