Search NASA⌕ Search

SEARCH · Search NASA

Results for “X-ray diffraction patterns”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Frustration-driven magnetic correlations in the spin-$\frac{5}{2}$ triangular lattice antiferromagnet RbFe⁢(HPO 3 ) 2

Here, a detailed study of the structural and magnetic properties of a spin-5/2 triangular lattice antiferromagnet RbFe⁢(HPO 3 ) 2 is presented using x-ray diffraction, magnetization, heat capacity, and 31 P nuclear magnetic resonance (NMR) experiments on a polycrystalline sample. The crystal structure features an equilateral triangular lattice of Fe 3+ ions. The thermodynamic measurements reveal the onset of a magnetic long-range order at 𝑇 N⁢1 ≃7.8K in zero field, followed by another low-temperature field-induced ordering at 𝑇 N⁢2 in higher fields. The transition at 𝑇 N⁢1 is further confirmed from the NMR spin lattice relaxation measurements. The value of the frustration ratio (𝑓≃7) implies moderate spin frustration in the compound. The 31 P NMR spectra exhibit two distinct spectral lines corresponding to two inequivalent phosphorus sites (P1 and P2), consistent with the crystal structure. The P1 site is strongly coupled with an isotropic hyperfine coupling of 𝐴$^{iso}_{hf}$ = 0.55⁢(2)⁢ T/𝜇 B while the P2 site is weakly coupled with 𝐴$^{iso}_{hf}$ = 0.25⁢(3)⁢ T/𝜇 B with the Fe 3+ ions. The magnetic susceptibility and NMR shift data are described well assuming a spin-5/2 isotropic triangular lattice antiferromagnetic model with an average exchange coupling of 𝐽/𝑘 B = 2.8⁢(2)⁢K. Below 𝑇 N⁢1 , the spectra evolve into a nearly rectangular powder pattern, indicating a commensurate antiferromagnetic type order. The 31 P spin-lattice relaxation rate well below 𝑇N⁢1 follows a 𝑇 3 temperature dependence, implying a two-magnon Raman scattering mechanism in the ordered state. Three well-defined phase regimes are clearly ascertained in the 𝐻−𝑇 phase diagram, reflecting a weak magnetic anisotropy in the compound.

Nagpal, V. [Indian Institute of Science Education ↗
DOE OSTI2022

Chemical and Structural Alterations in the Amorphous Structure of Obsidian due to Nanolites

Obsidian is volcanic glass that results from the rapid cooling of silica-rich melt. Nanoscale crystallites precipitate out of the melt prior to solidification and remain embedded in the amorphous matrix. These crystallites provide information on the flow kinetics and composition of the melt. Due to the sparsity and size of nanolites, studies often focus on supramicron crystallites. This research takes advantage of the conchoidal fracture of obsidian by knapping samples with nanometer-thin edges for transmission electron microscopy characterization. Nanolites in the amorphous matrix are studied using energy-dispersive spectroscopy (EDS) and electron diffraction. Certain alkali and alkaline-earth cations exhibit patterns of depletion near Fe-oxide nanolites. EDS is used to identify nanolites and variations in the composition of the matrix. Parallel beam diffraction and radial distribution function analysis of nearest-neighbor distances determine average bond lengths in the matrix near nanolites, showing that nanolites influence the nearby short-range ordering and atomic character of the matrix. Analysis reveals decreased mean nearest-neighbor distances in the matrix adjacent to nanolites compared to the bulk. Our methods exhibit the required sensitivity to detect variations in the composition and structure near nanolites, and our findings indicate that obsidian nanolites contribute to quantifiable localized changes in the amorphous structure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A machine learning photon detection algorithm for coherent x-ray ultrafast fluctuation analysis

X-ray free electron laser experiments have brought unique capabilities and opened new directions in research, such as creating new states of matter or directly measuring atomic motion. One such area is the ability to use finely spaced sets of coherent x-ray pulses to be compared after scattering from a dynamic system at different times. This enables the study of fluctuations in many-body quantum systems at the level of the ultrafast pulse durations, but this method has been limited to a select number of examples and required complex and advanced analytical tools. By applying a new methodology to this problem, we have made qualitative advances in three separate areas that will likely also find application to new fields. As compared to the “droplet-type” models, which typically are used to estimate the photon distributions on pixelated detectors to obtain the coherent x-ray speckle patterns, our algorithm achieves an order of magnitude speedup on CPU hardware and two orders of magnitude improvement on GPU hardware. We also find that it retains accuracy in low-contrast conditions, which is the typical regime for many experiments in structural dynamics. Finally, it can predict photon distributions in high average-intensity applications, a regime which up until now has not been accessible. Our artificial intelligence-assisted algorithm will enable a wider adoption of x-ray coherence spectroscopies, by both automating previously challenging analyses and enabling new experiments that were not otherwise feasible without the developments described in this work.

47 OTHER INSTRUMENTATION↗
DOE OSTI2015

Thickness and UV irradiation effects on the gas sensing properties of Te thin films

Highlights: • Tellurium thin films were prepared by thermal evaporation technique. • Tellurium thin films showed excellent gas-sensing properties to H{sub 2}S at room temperature. • Tellurium showed a remarkably enhanced response to H{sub 2}S gas under UV irradiation. • The reason of the enhanced response by UV irradiation was discussed. - Abstract: In this research, tellurium thin films were investigated for use as hydrogen sulfide gas sensors. To this end, a tellurium thin film has been deposited on Al{sub 2}O{sub 3} substrates by thermal evaporation, and the influence of thickness on the sensitivity of the tellurium thin film for measuring H{sub 2}S gas is studied. XRD patterns indicate that as the thickness increases, the crystallization improves. Observing the images obtained by SEM, it is seen that the grain size increases as the thickness increases. Studying the effect of thickness on H{sub 2}S gas measurement, it became obvious that as the thickness increases, the sensitivity decreases and the response and recovery times increase. To improve the response and recovery times of the tellurium thin film for measuring H{sub 2}S gas, the influence of UV radiation while measuring H{sub 2}S gas was also investigated. The results indicate that the response and recovery times strongly decrease using UV radiation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Mineralogical, magnetic and geochemical data constrain the pathways and extent of weathering of mineralized sedimentary rocks

The oxidative weathering of sulfidic rock can profoundly impact watersheds through the resulting export of acidity and metals. Weathering leaves a record of mineral transformation, particularly involving minor redox-sensitive phases, that can inform the development of conceptual and quantitative models. In sulfidic sedimentary rocks, however, variations in depositional history, diagenesis and mineralization can change or overprint the distributions of these trace minerals, complicating the interpretation of weathering signatures. Here we show that a combination of bulk mineralogical and geochemical techniques, micrometer-resolution X-ray fluorescence microprobe analysis and rock magnetic measurements, applied to drill core samples and single weathered fractures, can provide data that enable the development of a geochemically consistent weathering model. This work focused on one watershed in the Upper Colorado River Basin sitting within the Mesaverde Formation, a sedimentary sandstone bedrock with disseminated sulfide minerals, including pyrite and sphalerite, that were introduced during diagenesis and subsequent magmatic-hydrothermal mineralization. Combined analytical methods revealed the pathways of iron (Fe), carbonate and silicate mineral weathering and showed how pH controls element retention or release from the actively weathering fractured sandstone. Drill core logging, whole rock X-ray diffraction, and geochemical measurements document the progression from unweathered rock at depth to weathered rock at the surface. X-ray microprobe analyses of a 1-cm size weathering profile along a fracture surface are consistent with the mobilization of Fe(II) and Fe(III) into acidic pore water from the dissolution of primary pyrite, Fe-sphalerite, chlorite, and minor siderite and pyrrhotite. These reactions are followed by the precipitation of secondary minerals such as of goethite and jarosite, a Fe-(oxyhydr)oxide and hydrous Fe(III) sulfate, respectively. Microscale analyses also helped explain the weathering reactions responsible for the mineralogical transformations observed in the top and most weathered section of the drill core. For example, dissolution of feldspar and chlorite neutralizes the acidity generated by Fe and sulfide mineral oxidation, oversaturating the solution in both Fe-oxides. The combination of X-ray spectromicroscopy and magnetic measurements show that the Fe(III) product is goethite, mainly present either as a coating on fracture surfaces in the actively weathering region of the core or more homogeneously contained within the unconsolidated regolith at the top of the core. Low-temperature magnetic data reveal the presence of ferromagnetic Fe-sulfide pyrrhotite that, although it occurs at trace concentrations, could provide a qualitative proxy for unweathered sulfide minerals because the loss of pyrrhotite is associated with the onset of oxidative weathering. Pyrrhotite loss and goethite formation are detectable through room-temperature magnetic coercivity changes, suggesting that rock magnetic measurements can determine weathering intensity in rock samples at many scales. In conclusion, this work contributes evidence that the weathering of sulfidic sedimentary rocks follows a geochemical pattern in which the abundance of sulfide minerals controls the generation of acidity and dissolved elements, and the pH-dependent mobility of these elements controls their export to the ground- and surface-water.

58 GEOSCIENCES↗
DOE OSTI2021

A capillary-based microfluidic device enables primary high-throughput room-temperature crystallographic screening

A novel capillary-based microfluidic strategy to accelerate the process of small-molecule-compound screening by room-temperature X-ray crystallography using protein crystals is reported. The ultra-thin microfluidic devices are composed of a UV-curable polymer, patterned by cleanroom photolithography, and have nine capillary channels per chip. The chip was designed for ease of sample manipulation, sample stability and minimal X-ray background. 3D-printed frames and cassettes conforming to SBS standards are used to house the capillary chips, providing additional mechanical stability and compatibility with automated liquid- and sample-handling robotics. These devices enable an innovative in situ crystal-soaking screening workflow, akin to high-throughput compound screening, such that quantitative electron density maps sufficient to determine weak binding events are efficiently obtained. This work paves the way for adopting a room-temperature microfluidics-based sample delivery method at synchrotron sources to facilitate high-throughput protein-crystallography-based screening of compounds at high concentration with the aim of discovering novel binding events in an automated manner.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structure of diopside, enstatite, and magnesium aluminosilicate glasses: A joint approach using neutron and x-ray diffraction and solid-state NMR

Neutron diffraction with magnesium isotope substitution, high energy x-ray diffraction, and 29 Si, 27 Al, and 25 Mg solid-state nuclear magnetic resonance (NMR) spectroscopy were used to measure the structure of glassy diopside (CaMgSi 2 O 6 ), enstatite (MgSiO 3 ), and four (MgO) x (Al 2 O 3 ) y (SiO 2 ) 1–x–y glasses, with x = 0.375 or 0.25 along the 50 mol. % silica tie-line (1 – x – y = 0.5) or with x = 0.3 or 0.2 along the 60 mol. % silica tie-line (1 – x – y = 0.6). The bound coherent neutron scattering length of the isotope 25 Mg was remeasured, and the value of 3.720(12) fm was obtained from a Rietveld refinement of the powder diffraction patterns measured for crystalline 25 MgO. The diffraction results for the glasses show a broad asymmetric distribution of Mg–O nearest-neighbors with a coordination number of 4.40(4) and 4.46(4) for the diopside and enstatite glasses, respectively. As magnesia is replaced by alumina along a tie-line with 50 or 60 mol. % silica, the Mg–O coordination number increases with the weighted bond distance as less Mg 2+ ions adopt a network-modifying role and more of these ions adopt a predominantly charge-compensating role. 25 Mg magic angle spinning (MAS) NMR results could not resolve the different coordination environments of Mg 2+ under the employed field strength (14.1 T) and spinning rate (20 kHz). The results emphasize the power of neutron diffraction with isotope substitution to provide unambiguous site-specific information on the coordination environment of magnesium in disordered materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Investigation of spin reorientation in YMn{sub 1−x}Fe{sub x}O{sub 3} (x = 0.55, 0.6, 0.7, 0.8, 0.9, and 1.0) by Mössbauer spectroscopy

YMn{sub 1−x}Fe{sub x}O{sub 3} (x = 0.55, 0.6, 0.7, 0.8, 0.9, and 1.0) polycrystalline samples were prepared by the solid-state-reaction method. The crystal structure and magnetic properties of samples were investigated with x-ray diffractometer (XRD), vibrating sample magnetometer, and Mössbauer spectroscopy. The XRD patterns at 295 K, analyzed by Rietveld refinement method, showed that all samples were single-phased orthorhombic of Pnma with both Bragg (R{sub B}) and structure (R{sub F}) factors less than 5%. Mössbauer spectra of all samples were obtained at various temperatures ranging from 4.2 to 500 K, and the spectra below T{sub C} were fitted by least-square method as a function of the Fe and Mn distribution. Isomer shift (δ) values of all samples indicated that the charge states were Fe{sup 3+}. In addition, temperature-dependent hyperfine field (H{sub hf}), averaged electric quadrupole shift 〈E{sub Q}〉, and averaged isomer shift 〈δ〉 have shown abrupt changes around T{sub SR} due to the change in the charge state of Mn ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Voltage and temperature effects on low cobalt lithium-ion battery cathode degradation

Degradation of low cobalt lithium-ion cathodes was tested using a full factorial combination of upper cut-off voltage (4.0 V and 4.3 V vs. Li/Li + ) and operating temperature (25 °C and 60 °C). Half-cell batteries were analyzed with electrochemical and microstructural characterization methods. Electrochemical performance was assessed with galvanostatic cycling, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS) supported by distribution of relaxation times (DRT) analysis. Electrode microstructure was characterized with scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray absorption near edge structure (XANES) imaging. Higher cut-off voltage cycling shows presence of NiO x formation, a low diffusivity rock-salt phase, in both CV and XRD data. XRD patterns confirmed that the rock-salt phase was beginning to form at the low cut-off voltage at high temperature, but in much lower intensity than at the high cut-off voltage. Higher temperature accelerates degradation processes at both voltages. Degradation factors at high temperature include NiO x formation, cathode material dissolution, and electrolyte decomposition. SEM analysis suggests that supporting phases may isolate and disconnect active material particles reducing capacity retention and battery life cycle. DRT analysis and XANES imaging show that both high temperature samples revealed a NiO x phase based on an increased diffusive impedance and a visible shift in the XANES spectra. The low cut-off voltage, high temperature sample showed a split peak and shift to lower energies indicating early formation of the NiO x phase. The diffusive impedance, which hinders intercalation and deintercalation, is driven by the formation of the NiO x phase. While primarily driven by cut-off voltage, elevated temperature also contributes to this degradation mechanism.

electrochemical impedance spectroscopy↗
DOE OSTI2026

Adaptively coupled phase retrieval in multi-peak Bragg coherent diffraction imaging

Recent advances in Bragg coherent diffraction imaging (BCDI) experimental techniques permit routine measurement of multiple Bragg peaks from a single crystalline grain. The resulting images contain the full lattice distortion vector field which can be differentiated to provide lattice strain and rotation. With the advent of fourth-generation synchrotron light sources, such multi-peak datasets are produced at high rates, facilitating the need for rapid phase retrieval of the multiple peaks and subsequent image analysis. Here we describe and demonstrate a new implementation of a coupled phase retrieval technique for multi-peak BCDI which simultaneously treats each Bragg peak of the dataset and produces a three-dimensional image of the crystal's morphology and lattice distortion field. In addition, this method uses the redundant information contained in the various Bragg diffraction patterns to detect and suppress spurious signal appearing on the detector in a subset of the measurements. Compared with manual data editing, adaptive coupling produces a more consistent phase profile in reciprocal space and sharper surfaces in direct space, with no significant difference in computational cost. These improvements reduce the need for manual preprocessing and enable robust high-throughput analysis of multi-peak BCDI data, supporting near-real-time strain microscopy at modern synchrotron facilities.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Structural, magnetic and electrical transport properties of YMnAl

The intermetallic compound YMnAl, crystallizing in the cubic C-15 (MgCu 2 -type) structure, was prepared using arc-melting and annealing. Rietveld refinement of the XRD pattern yields a lattice parameter of a = 7.816(1) Å⁠. The system exhibits antiferromagnetic order with a transition temperature of approximately 38 K, along with indications of a spin-glass–like phase. The effective magnetic moment, estimated from Curie–Weiss fitting of the susceptibility versus temperature curve, is 6.06 μ B /f.u. and the Curie–Weiss temperature of −79 K confirming the antiferromagnetic nature. Isothermal magnetization measurements below and above the Néel temperature show no saturation, with a maximum magnetization of 0.09 μ B /f.u observed at an applied field of 9 T. The temperature dependence of resistivity exhibits a negative temperature coefficient, characteristic of dirty metals. Hall effect measurements indicate the absence of an anomalous Hall contribution. The Hall coefficient RH, carrier concentration n, and mobility μ estimated from R XY (H) are -1.05×10 -8 m 3 /C, 5.92×10 26 m -3 and 1.05×10 -3 m 2 /V.s, respectively. Our first-principles calculations indicate that YMnAl in the orthorhombic (Imma) structure has the lowest energy; however, the substitutional disorder occurring during experimental synthesis may favor the formation of the cubic Laves phase.

Crystallography↗
DOE OSTI2026

Decoding α-MoC 1− x Nanoparticle Formation in Continuous Flow via Machine Learning

Molybdenum carbide nanoparticles (α-MoC 1−x NPs) are promising catalysts that offer noble-metal-like performance at lower cost. We report a mild continuous-flow synthesis of α-MoC 1−x NPs from Mo(CO) 6 , coupled with in-line spectroscopic monitoring and machine learning (ML)-based analysis to quantify precursor conversion and product formation in real time. A multilayer perceptron ML model was found to accurately deconvolute complex, nonlinear spectral patterns, enabling identification of a two-step reaction pathway, involving precursor conversion to an amorphous intermediate followed by intraparticle crystallization to α-MoC 1−x NPs, with the first step being rate limiting. Ex situ small angle X-ray scattering (SAXS) and X-ray diffraction (XRD) validation confirm the predicted concentration profiles and crystallization behavior. This integrated approach showcases how ML can empower insights into NP nucleation and growth, paving the way for self-driving, flow-based platforms for NP synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Transport properties of the SnBi{sub 2}Te{sub 4}–PbBi{sub 2}Te{sub 4} solid solution

We report on the electrical and thermal transport properties of the Sn{sub 1−x}Pb{sub x}Bi{sub 2}Te{sub 4} series and we discuss the potential of these materials for thermoelectric conversion applications. From the evolution of the XRD patterns, we can confidently conclude that a complete solid solution exists between SnBi{sub 2}Te{sub 4} and PbBi{sub 2}Te{sub 4}, with no miscibility gap. A crossover from p-type conduction in Sn-rich samples to n-type conduction in Pb-rich ones has been observed, with a transition between x=0.3 and 0.4. A concomitant increase of the electrical resistivity and of the Seebeck coefficient has been observed in the solid solution, which leads to almost constant values of the thermoelectric power factor. Moreover, the thermal conductivity is slightly reduced in the solid solution. The best figure of merit ZT values at room temperature have been observed for p-type Sn{sub 0.8}Pb{sub 0.2}Bi{sub 2}Te{sub 4} with ZT=0.25 and for n-type Sn{sub 0.3}Pb{sub 0.7}Bi{sub 2}Te{sub 4} with ZT=0.15. - Graphical abstract: Seebeck coefficient in (Pb/Sn)Bi{sub 2}Te{sub 4} solid solution. - Highlights: • A complete solid solution exists between PbBi{sub 2}Te{sub 4} and SnBi{sub 2}Te{sub 4.} • A crossover between p-type and n-type is observed for 0.3<Pb fraction <0.4. • The lattice thermal conductivity is hardly reduced in the solid solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cu(II) Stability and UV-Induced Electron Transfer in a Metal–Organic Hybrid: An EPR, DFT, and Crystallographic Characterization of Copper-Doped Zinc Creatininium Sulfate

Single-crystal X-ray diffraction and electron paramagnetic resonance (EPR) spectroscopic experiments, complemented by quantum chemical DFT calculations, were carried out on the copper-doped metal–organic hybrid and Tutton salt analogue zinc creatininium sulfate to determine its crystal structure, to characterize the electronic structure of the doped Cu(II) binding site, and to propose a pathway for an excited-state, proton-coupled electron transfer (PCET) process in UV-exposed crystals. The crystal structure is isomorphous to that of cadmium creatininium sulfate, which has the transition ion, not in direct coordination with the creatinine, but forming a hexahydrate complex, which is bridged to a creatininium through an intervening sulfate ion. The EPR g (2.446, 2.112, 2.082) and copper hyperfine (A Cu : -327, -59.6, 10.8 MHz) tensor parameters are consistent with doped copper replacing host zinc in the metal–hexahydrate complex. These parameters are similar to those observed for copper hexahydrate in doped Tutton salt systems at low temperature, where the unpaired electron occupies mainly the copper 3d x 2 –y 2 orbital. At room temperature in the Tutton systems, vibration couplings stemming from a dynamic Jahn–Teller effect cause tensor averaging which results in a reduction in their maximum g-tensor and hyperfine tensor values. However, like for the doped isomorphous Cd creatinine crystal, the Cu(II) EPR exhibits little, or no room temperature averaging compared to its low temperature pattern. Samples exposed to 254 nm UV light generate a carbon-centered free radical species, characterized by an isotropic g-tensor (g = 2.0029) and an alpha-proton hyperfine coupling (-24 -14 +4 G). These parameters identify it as a creatinine radical cation formed by the oxidative release of one of its C2 methylene hydrogens. DFT calculations confirm the unpaired electronic structures of both the Cu(II) site and free radical. The growth in radical concentration with an increase in the UV exposure time coincides with a decrease in the copper EPR signal, indicating a coupled light-induced oxidation reduction process. A comparison of the crystal structure with the EPR parameters and DFT results provides evidence for a UV-induced PCET.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Crystalline 1D Coordination Polymer Inhibitor Layer Leads to Vertical Sidewalls in Selectively Deposited ZnO on Nanoscale Patterns

Area-selective atomic layer deposition (AS-ALD) is a promising technique for the fabrication of next-generation nanoelectronics. There are two main challenges in AS-ALD: (1) achieving high selectivity of deposition on the growth regions, and (2) preventing mushrooming of the growth material onto the nongrowth regions and achieving well-defined interfaces. In this work, we use benzenethiol (BT) as an inhibitor in the selective deposition of ZnO on SiO 2 in the presence of copper with and without a native oxide (Cu/CuO x ). We observe that BT forms a monolayer on the Cu surface and a Cu-thiolate multilayer structure on CuO x . Using grazing incidence X-ray diffraction combined with simulations, we find that the multilayer structure is crystalline and composed of 1D coordination polymers of Cu-thiolate. Here, using ellipsometry and X-ray photoelectron spectroscopy, we show that the BT consumes the entirety of the CuO x during multilayer formation, allowing the multilayer thickness to be tuned by the thickness of the original oxide. Both the monolayer BT and the multilayer BT prove to be effective inhibitors of ZnO ALD, blocking nearly 500 ALD cycles, which is more than twice that achieved with other thiol inhibitors. Finally, we demonstrate that the multilayer structure can prevent mushrooming of the ALD material onto the nongrowth surface of nanoscale patterns, creating vertical sidewalls with well-defined material interfaces and providing excellent pattern transfer, even for a relatively thick deposited film. As such, these results demonstrate that BT is not only an effective inhibitor but also that its ability to form tunable multilayers makes it well-suited for highly precise nanopatterning applications.

Layers↗
DOE OSTI2022

Realizing crack-free high-aluminum-mole-fraction AlGaN on patterned GaN beyond the critical layer thickness

Wide-bandgap III-nitride heterostructures are required for a variety of device applications. However, this alloy system has a large lattice constant and thermal expansion coefficient mismatch that limits the alloy composition and layer thickness for many heteroepitaxial device structures. Consequently, various methods have been devised to allow the heteroepitaxial growth of AlInGaN heterostructures to accommodate this inherent strain. In this work, we describe a non-planar-growth approach that enables the deposition of crack-free high-Al-mole-fraction Al x Ga 1-x N on patterned GaN/sapphire templates and bulk GaN substrates with large-area mesas. We have studied the effects of the patterned mesa width, the mesa etch depth, and the gap between the mesas on the heteroepitaxy of Al x Ga 1-x N superlattices with an average Al molar fraction 0.11 < x¯ < 0.21 and non-planar overgrowth growth thicknesses up to 3.5 μm. Similar to the planar growth approach, increasing the thickness and Al mole fraction of the Al x Ga 1-x N superlattices leads to surface cracking when exceeding the critical layer thickness. However, limiting the mesa dimension in one direction enables strain mitigation and drastically increases the critical layer thickness. Additionally, larger etch depths of the mesas increase the Al alloy composition and thickness for crack-free AlGaN heteroepitaxy whereas the gap in between the mesas seems to have no crucial influence. We demonstrate that the Al alloy composition and layer thicknesses of such heterostructures can be increased far beyond the critical layer thickness for planar growth and demonstrate the growth of a crack-free full AlxGa 1-x N/GaN quantum-well laser heterostructure designed for operation at ~370 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Crystal structure and magnetic properties in semiconducting Eu 3-δ Zn x Sn y As 3 with Eu-Eu dimers

Magnetic structure and crystal symmetry, which primarily determine the time-reversal and inversion symmetry, may give rise to numerous exotic quantum phenomena in magnetic semiconductors and semimetals when arranged in different patterns. Here, a new layered magnetic semiconductor, Eu 3-δ Zn x Sn y As 3 , was discovered and high-quality single crystals were grown using the Sn flux. According to structural characterization by x-ray diffraction and atomic-resolution scanning transmission electron microscopy, Eu 3-δ Zn x Sn y As 3 is found to crystallize in a hexagonal symmetry with the space group P6 3 /mmc (No. 194). After examining different specimens, we conclude that their stoichiometry is fixed at ~Eu 2.6 Zn 0.65 Sn 0.85 As 3 , which meets the chemical charge balance. Eu 3-δ Zn x Sn y As 3 is composed of septuple (Eu 1-δ Sn y As 2 )-Eu-(Zn x As)-Eu sequences. The shortest Eu–Eu distance in the system is between two Eu layers separated by Zn x As along the c-axis. Magnetization measurement shows an antiferromagnetic ordering in Eu 3-δ Zn x Sn y As 3 at T N ~ 12 K, where the magnetic easy-axis is along the c-axis, and Mössbauer spectroscopy observes magnetic hyperfine splitting on Eu and Sn at 6 K. Magnetic anisotropy is significantly different from the ones along the ab-plane in other layered Eu-based magnetic semimetals. Heat capacity measurements confirm the magnetic transition around 12 K. Electrical resistivity measurement indicates semiconductor behavior with a band gap of ~0.86 eV. Finally, various Eu-based magnetic semiconductors could provide a tunable platform to study potential topological and magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Robust superconductivity and the suppression of charge-density wave in the quasi-skutterudites Ca 3 ( Ir 1 – x Rh x ) 4 Sn 13 single crystals at ambient pressure

Single crystals of the quasi-skutterudite compounds Ca 3 (Ir 1-x Rh x ) 4 Sn 13 (3–4–13) were synthesized by flux growth and characterized by x-ray diffraction, energy dispersive x-ray spectroscopy, magnetization, resistivity, and radio frequency magnetic susceptibility techniques. The coexistence and competition between the charge density wave (CDW) and superconductivity was studied by varying the Rh/Ir ratio. The superconducting transition temperature, T c , varies from 7 K in pure Ir (x = 0) to 8.3 K in pure Rh (x = 1). Temperature-dependent electrical resistivity reveals monotonic suppression of the CDW transition temperature, T CDW (x). The CDW starts in pure Ir, x = 0, at T CDW ≈ 40 K and extrapolates roughly linearly to zero at x c ≈ 0.53–0.58 under the superconducting dome. Magnetization and transport measurements show a significant influence of CDW on superconducting and normal states. Meissner expulsion is substantially reduced in the CDW region, indicating competition between the CDW and superconductivity. The low-temperature resistivity is higher in the CDW part of the phase diagram, consistent with the reduced density of states due to CDW gapping. Its temperature dependence just above T c shows signs of non-Fermi liquid behavior in a cone-like composition pattern. We conclude that the Ca 3 (Ir 1-x Rh x ) 4 Sn 13 alloy is a good candidate for a composition-driven quantum critical point at ambient pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗