Search NASA⌕ Search

SEARCH · Search NASA

Results for “airborne simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Snow water equivalent determination by microwave radiometry

One of the most important parameters for accurate snowmelt runoff prediction is snow water equivalent (SWE) which is contentionally monitored using observations made at widely scattered points in or around specific watersheds. Remote sensors which provide data with better spatial and temporal coverage can be used to improve the SWE estimates. Microwave radiation, which can penetrate through a snowpack, may be used to infer the SWE. Calculations made from a microscopic scattering model were used to simulate the effect of varying SWE on the microwave brightness temperature. Data obtained from truck mounted, airborne and spaceborne systems from various test sites were studied. The simulated SWE compares favorable with the measured SWE. In addition, whether the underlying soil is frozen or thawed can be discriminated successfully on the basis of the polarization of the microwave radiation.

Chang, A. T. C.↗

Airborne Four-Dimensional Flight Management in a Time-based Air Traffic Control Environment

Advanced Air Traffic Control (ATC) systems are being developed which contain time-based (4D) trajectory predictions of aircraft. Airborne flight management systems (FMS) exist or are being developed with similar 4D trajectory generation capabilities. Differences between the ATC generated profiles and those generated by the airborne 4D FMS may introduce system problems. A simulation experiment was conducted to explore integration of a 4D equipped aircraft into a 4D ATC system. The NASA Langley Transport Systems Research Vehicle cockpit simulator was linked in real time to the NASA Ames Descent Advisor ATC simulation for this effort. Candidate procedures for handling 4D equipped aircraft were devised and traffic scenarios established which required time delays absorbed through speed control alone or in combination with path stretching. Dissimilarities in 4D speed strategies between airborne and ATC generated trajectories were tested in these scenarios. The 4D procedures and FMS operation were well received by airline pilot test subjects, who achieved an arrival accuracy at the metering fix of 2.9 seconds standard deviation time error. The amount and nature of the information transmitted during a time clearance were found to be somewhat of a problem using the voice radio communication channel. Dissimilarities between airborne and ATC-generated speed strategies were found to be a problem when the traffic remained on established routes. It was more efficient for 4D equipped aircraft to fly trajectories with similar, though less fuel efficient, speeds which conform to the ATC strategy. Heavy traffic conditions, where time delays forced off-route path stretching, were found to produce a potential operational benefit of the airborne 4D FMS.

Williams, David H.↗

Dynamical Conditions of Ice Supersaturation and Ice Nucleation in Convective Systems: A Comparative Analysis Between in Situ Aircraft Observations and WRF Simulations

Occurrence frequency and dynamical conditions of ice supersaturation (ISS, where relative humidity with respect to ice (RHi) greater than 100%) are examined in the upper troposphere around convective activity. Comparisons are conducted between in situ airborne observations and the Weather Research and Forecasting model simulations using four double-moment microphysical schemes at temperatures less than or or equal to -40degdegC. All four schemes capture both clear-sky and in-cloud ISS conditions. However, the clear-sky (in-cloud) ISS conditions are completely (significantly) limited to the RHi thresholds of the Cooper parameterization. In all of the simulations, ISS occurrence frequencies are higher by approximately 3-4 orders of magnitude at higher updraft speeds (greater than 1 m s(exp -1) than those at the lower updraft speeds when ice water content (IWC) greater than 0.01 gm(exp -3), while observations show smaller differences up to approximately 1-2 orders of magnitude. The simulated ISS also occurs less frequently at weaker updrafts and downdrafts than observed. These results indicate that the simulations have a greater dependence on stronger updrafts to maintain/generate ISS at higher IWC. At lower IWC (less than or equal or 0.01 gm(exp -3), simulations unexpectedly show lower ISS frequencies at stronger updrafts. Overall, the Thompson aerosol-aware scheme has the closest magnitudes and frequencies of ISS greater than 20% to the observations, and the modified Morrison has the closest correlations between ISS frequencies and vertical velocity at higher IWC and number density. The Cooper parameterization often generates excessive ice crystals and therefore suppresses the frequency and magnitude of ISS, indicating that it should be initiated at higher ISS (e.g.,lees than or equal to 25%).

D’Alessandro, John J.↗

Wildfire Emissions and Their Interaction with Urban and Rural Pollution: Data and Simulations

In recent years NASA has conducted a series of airborne campaigns (e. g. SEAC4RS*, ARCTAS, INTEX-A/B) over North America using an instrumented DC-8 aircraft equipped to measure a very large number of gaseous and aerosol constituents including several unique tracers. In these campaigns wild fires were extensively sampled near source as well as downwind after aging. The data provided detailed information on the composition and chemistry of fire emissions under a variety of atmospheric conditions as well as their interactions with rural and urban air pollution. Major fires studied including the California Rim fire in 2013 (SEAC4RS), the 2008 California wildfires (ARCTAS), and the Alaskan fires downwind over eastern US (INTEX-A). Although some fire plumes contained virtually no O3 enhancement, others showed significant ozone formation. Over Los Angeles, the highest O3 mixing ratios were observed in fire influenced urban air masses. Attempts to simulate these interactions using state of the art models were only minimally successful and indicated several shortcomings in simulating fire emission influences on urban smog formation. A variety of secondary oxidation products (e. g. O3, PAN, HCHO) were substantially underestimated. We will discuss the data collected in fire influenced air masses and their potential air quality implications.

FIre Emissions↗

Microphysical Retrievals Over Stratiform Rain Using Measurements from an Airborne Dual-Wavelength Radar-Radiometer

The need to understand the complementarity of the radar and radiometer is important not only to the Tropical Rain Measuring Mission (TRMM) program but to a growing number of multi-instrumented airborne experiment that combine single or dual-frequency radars with multichannel radiometers. The method of analysis used in this study begins with the derivation of dual-wavelength radar equations for the estimation of a two-parameter drop size distribution (DSD). Defining a "storm model" as the set of parameters that characterize snow density, cloud water, water vapor, and features of the melting layer, then to each storm model there will usually correspond a set of range-profiled drop size distributions that are approximate solutions of the radar equations. To test these solutions, a radiative transfer model is used to compute the brightness temperatures for the radiometric frequencies of interest. A storm model or class of storm models is considered optimum if it provides the best reproduction of the radar and radiometer measurements. Tests of the method are made for stratiform rain using simulated storm models as well as measured airborne data. Preliminary results show that the best correspondence between the measured and estimated radar profiles usually can be obtained by using a moderate snow density (0.1-0.2 g/cu cm), the Maxwell-Garnett mixing formula for partially melted hydrometeors (water matrix with snow inclusions), and low to moderate values of the integrated cloud liquid water (less than 1 kg/sq m). The storm-model parameters that yield the best reproductions of the measured radar reflectivity factors also provide brightness temperatures at 10 GHz that agree well with the measurements. On the other hand, the correspondence between the measured and modeled values usually worsens in going to the higher frequency channels at 19 and 34 GHz. In searching for possible reasons for the discrepancies, It is found that changes in the DSD parameter Mu, the radar constants, or the path-integrated attenuation can affect the high frequency channels significantly. In particular, parameters that cause only modest increases in the median mass diameter of the snow, and which have a minor effect on the radar returns or the low frequency brightness temperature, can produce a strong cooling of the 34 GHz brightness temperature.

Meneghini, Robert↗

Modeling Optical Properties of Mineral Aerosol Particles by Using Nonsymmetric Hexahedra

We explore the use of nonsymmetric geometries to simulate the single-scattering properties of airborne dust particles with complicated morphologies. Specifically, the shapes of irregular dust particles are assumed to be nonsymmetric hexahedra defined by using the Monte Carlo method. A combination of the discrete dipole approximation method and an improved geometric optics method is employed to compute the single-scattering properties of dust particles for size parameters ranging from 0.5 to 3000. The primary optical effect of eliminating the geometric symmetry of regular hexahedra is to smooth the scattering features in the phase function and to decrease the backscatter. The optical properties of the nonsymmetric hexahedra are used to mimic the laboratory measurements. It is demonstrated that a relatively close agreement can be achieved by using only one shape of nonsymmetric hexahedra. The agreement between the theoretical results and their measurement counterparts can be further improved by using a mixture of nonsymmetric hexahedra. It is also shown that the hexahedron model is much more appropriate than the "equivalent sphere" model for simulating the optical properties of dust particles, particularly, in the case of the elements of the phase matrix that associated with the polarization state of scattered light.

Bi, Lei↗

Large Volume Airborne Contamination Monitoring To Support Nuclear Processes' Deactivation and Decommissioning

Current D and D operations at Hanford have demonstrated a flaw in the current state of the art capability of defining airborne contamination boundaries - Airborne particulate emissions of Pu-239 from CM2H operations on the Hanford Pu Finishing Plant were detected well beyond areas controlled for airborne Pu, putting numerous workers at risk for radiological assimilations - Current air samplers and CAM systems were surveying insufficient volumes of air to accurately predict where respiratory protection was required - Hanford is located in a high radon environment, making air monitoring for alpha emitting actinides challenging in high alpha radon induced backgrounds. - Inexpensive HEPA based home and industrial air purifiers filter significantly higher volumes of air than commercially available continuous-air monitoring (CAM) systems. - Inexpensive models capable of filtered air volumes exceeding 1000 times that of a CAM. - Detector system can be built to detect x-rays generated from actinide decay. - Branching ratios of x-rays are 4 orders of magnitude more intense from Plutonium decay than its gamma emissions. - Detector system can be a low resolution systems, as x-ray region of interest is not terribly congested. - Detection systems evaluated will be designed based on slabs of NaI or pixelated NaI or CsI panels. - Simple graphical user interface software will be developed to operate the detection system. - Concept is to deploy some of these air-purifying systems in nonradiological areas around SRNL to confirm radon can be rejected with confidence. - Generate some filters contaminated with plutonium via electroplated Pu or lab generated simulated particles. - then deploy units in known airborne radiological environments to establish systems ability to accurately measure actinide based hot particles Lab analyses will follow up the system analyses to ensure hot particles were correctly identified. Analysis by Scintillation: - Application of scintillation media to the surface of the filters is being explored. - Evaluating slabs of ZnS(Ag), application of powdered ZnS(Cu) and spray on Perkin Elmer Enhance. - Scintillation events would then be digitized with a digital camera and quantified. - Comparing against sensitivity of a PMT or SiPD readout. - Currently evaluating a Thorlabs 8 Megapixel Monochrome Scientific CCD Camera, hermetically sealed cooled package with a wide angle lens. - Wide angle lens allows complete view of HEPA filter from 7 inches away. - Images taken of glow in the dark paint, as well as plutonium-induced fluorescence. - Plutonium was flamed mounted on a 1 inch diameter stainless steel planchet, covered with a layer of mylar and a section of scintillating ZnS obtained from Eljon. - Currently working on reducing signal-to-noise levels to boost sensitivity. - Dark box to hold contaminated or electroplated source covered filters under fabrication. Analysis by x-ray Spectroscopy: - Branching ratios for x-ray emissions from Plutonium isotopes are orders of magnitude more intense than gamma-ray emissions. - The nuclear databases are incomplete on the branching ratios of some of the isotopes. - Evaluating some custom built SrI2 x-ray spectrometers vs a conventional windowed NaI detector. - SrI2 detectors are carbon-composite-windowed 51 mm x 51 mm. - MCNP calculations to establish self absorbance of filter media on 17 keV x-ray. Radon Rejection: - Activated charcoal pre-filter acts as a Radon trap. - Adding a time lapse feature to camera to aid in radon rejection. SRS Plutonium Fuel Form D and D Operations: Currently deploying air sampler to D and D operation of Pu-238 facility at SRS to generate some field samples to analyze.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Causes of Model Biases in Simulating Inorganic Aerosol Composition During KORUS-AQ and Implications for the Estimate of Transboundary Pollution

East Asia is a region of increasing economic growth which has led to severe PM2.5 pollution in urban areas. The joint NASA-NIER Korea-United States Air Quality (KORUS-AQ) field campaign in May-June 2016 provided an extensive dataset of ground, airborne, and remote sensing observations to test model simulations of PM2.5 pollution transport and potential control measures. During KORUS-AQ, a period of haze was observed in which PM2.5 rapidly increased to the highest levels observed during the campaign. This increase is associated with increasing inorganic aerosol. While a portion of this increase is due to long-range transport, there is observational evidence that aerosol formation from local precursors was also enhanced. This suggests that domestic policy measures could have a greater than expected influence on controlling PM2.5. However, models have difficulty reproducing PM2.5 levels, particularly the composition of secondary inorganic aerosol. Models generally underestimate sulfate and overestimate nitrate and fail to represent the peak levels of PM2.5 during haze events. These biases have been chiefly attributed to errors in chemical mechanisms and model meteorology, not issues with underlying emissions inventories. Here, we use observations from KORUS-AQ interpreted by the GEOS-Chem chemical transport model to improve the model’s ability to reproduce secondary inorganic aerosol concentrations during the campaign and explore mechanisms to improve model biases during the haze event. We assess the fraction of inorganic aerosol from the improved model simulation that results from transboundary transport during KORUS-AQ and test the model sensitivity to potential emission reduction measures that could improve air quality in Seoul during different meteorological periods including haze episodes.

Katie Travis↗

Impact of Lidar Wind Sounding on Mesoscale Forecast

An Observing System Simulation Experiment (OSSE) was conducted to study the impact of airborne lidar wind sounding on mesoscale weather forecast. A wind retrieval scheme, which interpolates wind data from a grid data system, simulates the retrieval of wind profile from a satellite lidar system. A mesoscale forecast system based on the PSU/NCAR MM5 model is developed and incorporated the assimilation of the retrieved line-of-sight wind. To avoid the "identical twin" problem, the NCEP reanalysis data is used as our reference "nature" atmosphere. The simulated space-based lidar wind observations were retrieved by interpolating the NCEP values to the observation locations. A modified dataset obtained by smoothing the NCEP dataset was used as the initial state whose forecast was sought to be improved by assimilating the retrieved lidar observations. Forecasts using wind profiles with various lidar instrument parameters has been conducted. The results show that to significantly improve the mesoscale forecast the satellite should fly near the storm center with large scanning radius. Increasing lidar firing rate also improves the forecast. Cloud cover and lack of aerosol degrade the quality of the lidar wind data and, subsequently, the forecast.

Miller, Timothy L.↗

Preliminary Evaluation of GEOS-5 Aerosol and CO Distributions Forecast During TC4

The NASA Tropical Composition, Cloud, and Climate Coupling (TC4) Mission was based out San Jose, Costa Rica during July and August 2007. During TC4 the NASA Global Modeling and Assimilation Office (GMAO) ran twice-daily 0.5 x 0.666 global 5-day forecasts of the Goddard Earth Observing System atmospheric general circulation model and data assimilation system (GEOS-5). This implementation of GEOS-5 contained an aerosol and carbon monoxide (CO) model to provide online forecast tropospheric distributions of dust, sea salt, sulfate, and carbonaceous aerosols and CO for both the planning of flights and for science. Here we provide a description of the aerosol and CO modeling system and give a preliminary evaluation of forecast tracer distributions. Our comparisons to satellite observations of aerosol and CO show qualitatively similar simulated distributions of tracers to those observed. During TC4 copious amounts of dust were observed in the Caribbean. The model generally reproduced the observations of the timing of dust events and the vertical structure in the lower atmosphere. However, the model simulations had too much aerosol at high altitudes relative to airborne Cloud Physics Lidar observations. The results were similar for biomass burning aerosol and CO tracers, where the model showed higher simulated concentrations of these tracers at aircraft flight altitude than observations.

Colarco, Peter R.↗

Flight test results of the strapdown ring laser gyro tetrad inertial navigation system

A helicopter flight test program undertaken to evaluate the performance of Tetrad (a strap down, laser gyro, inertial navigation system) is described. The results of 34 flights show a mean final navigational velocity error of 5.06 knots, with a standard deviation of 3.84 knots; a corresponding mean final position error of 2.66 n. mi., with a standard deviation of 1.48 n. mi.; and a modeled mean position error growth rate for the 34 tests of 1.96 knots, with a standard deviation of 1.09 knots. No laser gyro or accelerometer failures were detected during the flight tests. Off line parity residual studies used simulated failures with the prerecorded flight test and laboratory test data. The airborne Tetrad system's failure--detection logic, exercised during the tests, successfully demonstrated the detection of simulated ""hard'' failures and the system's ability to continue successfully to navigate by removing the simulated faulted sensor from the computations. Tetrad's four ring laser gyros provided reliable and accurate angular rate sensing during the 4 yr of the test program, and no sensor failures were detected during the evaluation of free inertial navigation performance.

Carestia, R. A.↗

Enhancing Risk Analysis of Accidental Release Using CFD Modeling and Machine Learning

This project report presents the results from the AU31 project that is entitled “Enhancing Risk Analysis of Accidental Release Using CFD Modeling and Machine Learning” performed between FY2021 and FY2022. The technical objective of this project is to enhance risk analysis of accidental release of radioactive materials and provide novel risk forecasting and capabilities for assessing unplanned hazardous chemical releases for the U.S. Department of Energy (DOE). The approach includes a cross-platform finite element analysis of airborne chemical release, machine learning (ML) for simulation and forecasting, and a big data approach to data management, transformation and analysis capable of handling petabyte-scale unstructured and structured data. The outcome of these findings were assembled and accessible as a final output via an intuitive web hosted geospatial-based user interface for demonstration and general dissemination. These new results also provide a mechanism of combining this knowledge in a risk analysis framework tool. The geospatial analysis and output can utilize 5 years of qualified meteorological data to illustrate projected plume footprints that are generated from computational aspects of this study. Specifically, we show the development of a geospatial risk analysis capabilities to respond to and plan for accidental release of radioactive materials and to provide a risk forecasting tool for assessing hazardous chemical releases for the DOE. The focus of this effort is germane to common practices in risk analysis; and it is highly relevant to the timely and transparent release of information related to materials at risk including hazardous materials and chemical vapors and rapid assessment of the potential impacts on the workforce at active sites across the DOE complex.

42 ENGINEERING↗

An integrated PCM data system for full scale aeronautics testing

An integrated PCM data system is being developed at Ames Research Center to gather test data on advanced STOL propulsive lift, VTOL, rotary wing, and V/STOL control systems concepts as they pass through wind-tunnel, test-stand, flight-simulator and flight-test phases. Identical airborne signal conditioning and PCM encoding is used on test aircraft and wind tunnel models. An 80,000 word/second PCM installation will be the first all PCM-instrumented rotary wing development project. The system uses both dedicated and time-shared computers for fast data analysis with maximum use of resources. This system development shows one way to bring separate data user groups together over a common data base, while sharing computing resources for minimum cost.-

Reynolds, D. R.↗

Determination of growth stage from reflectance spectra of crops

The spectral reflectance characteristics of vegetation have been studied with the objective to learn how to extract useful information about the state of surface vegetation from space-borne observing systems, with emphasis on agricultural applications. Results of simulation studies based on high-resolution airborne spectrometer data indicate that changes in biomass, plant pigment, and leaf water content can be independently tracked by monitoring the reflective properties of vegetation with an appropriate selection of bands.

Ungar, S. G.↗

The effect of spatial, spectral and radiometric factors on classification accuracy using Thematic Mapper data

An experiment of a factorial design was conducted to test the effects on classification accuracy of land cover types due to the improved spatial, spectral and radiometric characteristics of the LANDSAT Thematic Mapper (TM) in comparison to the Multispectral Scanner (MSS). High altitude aircraft scanner data from the Airborne Thematic Mapper instrument was used to simulate TM data as well as all combinations of the three characteristics for eight data sets in all. Results for the training sites (field-center pixels) show better classification accuracies for MSS spatial resolution, TM spectral bands and TM radiometry in order of importance.

Wrigley, R. C.↗

The right wing of the LEFT airplane

The NASA Leading-Edge Flight Test (LEFT) program addressed the environmental issues which were potential problems in the application of Laminar Flow Control (LFC) to transport aircraft. These included contamination of the LFC surface due to dirt, rain, insect remains, snow, and ice, in the critical leading-edge region. Douglas Aircraft Company designed and built a test article which was mounted on the right wing of the C-140 JetStar aircraft. The test article featured a retractable leading-edge high-lift shield for contamination protection and suction through perforations on the upper surface for LFC. Following a period of developmental flight testing, the aircraft entered simulated airline service, which included exposure to airborne insects, heavy rain, snow, and icing conditions both in the air and on the ground. During the roughly 3 years of flight testing, the test article has consistently demonstrated laminar flow in cruising flight. The experience with the LEFT experiment was summarized with emphasis on significant test findings. The following items were discussed: test article design and features; suction distribution; instrumentation and transition point reckoning; problems and fixes; system performance and maintenance requirements.

Powell, Arthur G.↗

Software for the derivation of scaled surface reflectances from AVIRIS data

An operational software program is now available for deriving 'scaled surface reflectances' from spectral data collected by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). The program simulates both the atmospheric scattering and absorption effects. Brief descriptions of the algorithm, inputs, outputs, the limitations of the software, and procedures for obtaining the software are given.

Gao, Bo-Cai↗

Monitoring of Volcanogenic CO2-Induced Tree Kills with AVIRIS Image Data at Mammoth Mountain, California

Elevated cold CO2 emissions from the flank of Mammoth Mountain volcano on the southwest rim of the Long Valley Caldera, eastern California, have been the cause of over 100 acres of dead trees in that area since 1990. The source of the CO2 gas is thought to be from one or more magmatic intrusion(s) beneath Mammoth Mountain and is probably related to a period of seismic unrest that began in 1989. The gas rises to the surface probably from depths of a few kilometers, along faults and fracture zones. The gas is at ambient temperature and diffuses from the soil rather than discharging from distinct vents. Typically, soil gas concentrations in tree-kill areas range from 10% to over 90% CO2 by volume, as compared to normal background of < 1% in healthy forest. The gas composition is predominantly CO2 mixed with air (sulfur gases are not elevated), and C and He isotopic ratios are consistent with a magmatic origin for the gas. The total CO2 emission has been estimated at 1200 tons/day, comparable to the emissions at Kilauea. Some of the dead trees are as old as 250 years, suggesting that similar anomalous gas discharge has not occurred over the previous few hundred years. The delta C-13/12 ratio in the Mammoth Mountain CO2 emission averages about -4.5 (PDB standard). This is consistent with a mantle source for the carbon. However, the large volume of the emission suggests that not all of the CO2 is necessarily being generated from the 1989 intrusion. The voluminous gas could be leaking from a vapor-rich zone, capped by an impermeable layer, that was supplied CO2 from degassing of many small magma bodies that intruded beneath the mountain over a period of decades or centuries. Earthquakes in 1989 could have fractured the capping layer and provided pathways for the escape Of CO2 to the surface. Alternatively, some of the CO2 could be derived from contact metamorphism of carbonate rocks intruded by magma. Carbonate-bearing Paleozoic roof pendents crop out in close proximity to Mammoth Mountain. It is possible that similar rocks could occur at depth beneath Mammoth Mountain, and could have contributed CO2 from thermal decomposition caused from recent intrusions. We hope to determine the C-13/12 ratio of a suite of samples to demonstrate if the carbonate rocks could be the source of at least part of the 1990-97 CO2 emission. To better understand the behavior of the CO2 gas, we have used hyperspectral imagery data of Mammoth Mountain acquired from the Airborne Visual/Infrared Imaging Spectrometer (AVIRIS) to map out areas of dead trees. The areas of tree kill have increased in size from about 50 acres in 1994 to about 100 acres in 1997. Tree kill is the major surface manifestation of the carbon dioxide flux at Mammoth Mountain, is widely dispersed, and has been cursorily mapped by regular field mapping techniques in the area. Initial investigations using airborne digital imagery from the Thematic Mapper Simulator (NS001) and AVIRIS instruments have shown extremely encouraging results for complete delineation of the vegetation anomalies. The most successful maps (when compared with ground truth) were developed using AVIRIS data with spectral angle mapper and matched filter algorithms with a data set that was reduced to maximum variance via the minimum noise fraction transformation. The result of this work is a series of maps that show the tree kill areas occurring in an halo-pattern surrounding the base of Mammoth Mountain. We are applying these same techniques to earlier AVIRIS images of Mammoth Mountain to examine the progression of the tree kill areas over time. Temporal maps of the tree kill areas may assist in constructing a picture of the structure beneath Mammoth Mountain.

Hausback, Brian P.↗