Search NASA⌕ Search

SEARCH · Search NASA

Results for “analysis of kinetic data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Cure kinetics of epoxy matrix resin by differential scanning calorimetry

A study was made on the cure kinetics of an epoxy neat-resin (Narmco 5208) using Differential Scanning Calorimetry (DSC). Two interrelated analytical methods were applied to dynamic DSC data for evaluating the kinetic parameters, such as activation energy, E, the order of reaction, n, and the total heat of polymerization (or crosslinking), delta H sub t. The first method was proposed by Ellerstein (1968), and uses a thorough differential-integral analysis of a single DSC curve to evaluate the kinetic parameters. The second method was proposed by Kissinger (1957), and uses multiple DSC curves obtained at various heating rates to evaluate E regardless of n. Kinetic analysis of Narmco 5208 epoxy resin showed that the reaction order, n, is substantially affected by the rate of heating; i.e., n is approximately 2 at slow scan rates but is reduced to 1.5 at higher scan rates. The activation energy, E, is not affected by the scan rate, and the average value of E is 25.6 + or - 1.8 kcal/mole.

Cizmecioglu, M.↗
NASA NTRS1994

LSENS: A General Chemical Kinetics and Sensitivity Analysis Code for homogeneous gas-phase reactions. Part 3: Illustrative test problems

LSENS, the Lewis General Chemical Kinetics and Sensitivity Analysis Code, has been developed for solving complex, homogeneous, gas-phase chemical kinetics problems and contains sensitivity analysis for a variety of problems, including nonisothermal situations. This report is part 3 of a series of three reference publications that describe LSENS, provide a detailed guide to its usage, and present many example problems. Part 3 explains the kinetics and kinetics-plus-sensitivity analysis problems supplied with LSENS and presents sample results. These problems illustrate the various capabilities of, and reaction models that can be solved by, the code and may provide a convenient starting point for the user to construct the problem data file required to execute LSENS. LSENS is a flexible, convenient, accurate, and efficient solver for chemical reaction problems such as static system; steady, one-dimensional, inviscid flow; reaction behind incident shock wave, including boundary layer correction; and perfectly stirred (highly backmixed) reactor. In addition, the chemical equilibrium state can be computed for the following assigned states: temperature and pressure, enthalpy and pressure, temperature and volume, and internal energy and volume. For static problems the code computes the sensitivity coefficients of the dependent variables and their temporal derivatives with respect to the initial values of the dependent variables and/or the three rate coefficient parameters of the chemical reactions.

Bittker, David A.↗
NASA NTRS1994

An automated digital data collection and analysis system for the Charpy Impact Tester

The standard Charpy Impact Tester has been modified by the addition of a system of hardware and software to improve the accuracy and consistency of measurements made during specimen fracturing experiments. An optical disc, light source, and detector generate signals that indicate the pendulum position as a function of time. These signals are used by a computer to calculate the velocity and kinetic energy of the pendulum as a function of its position.

Kohne, Glenn S.↗
DOE OSTI2022

Formation of PAHs, phenol, benzofuran, and dibenzofuran in a flow reactor from the oxidation of ethylene, toluene, and n-decane

The necessity to reveal the formation mechanism of not only polycyclic aromatic hydrocarbons (PAHs) but also oxygenated PAHs (OPAHs) during combustion is increasing. Although many studies on PAHs have been conducted, fundamental studies investigating OPAH formation are still limited. Phenol, benzofuran, and dibenzofuran were selected as OPAHs in this study. We experimentally investigated fuel-rich oxidation in a flow reactor at atmospheric pressure, mean gas temperatures from 1050 to 1350 K, residence times from 0.2 to 1.5 s, and equivalence ratios from 3.0 to 12.0. Ethylene, toluene, and n-decane were used as fuels. Three kinds of OPAHs as well as 23 kinds of PAHs including monocyclic structures were quantitatively measured through a direct sampling using gas chromatography mass spectrometry. The results showed that concentrations of PAHs and OPAHs were strongly affected by the fuel type, with increasing concentrations in the following order: ethylene < n-decane < toluene. A chemical kinetic model for OPAH formation was developed based on a recent PAH growth model. The model showed that the predicted concentrations of OPAHs and PAHs were in reasonable agreement with the measured data in this study. Some modifications were made to the previous model based on recent literature studies and on the comparison of the simulated and measured results. The effect of the fuel type on the formation of PAHs and OPAHs was investigated through kinetic analysis using the model to discuss their reaction pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Solvent influence on non-adiabatic interfacial electron transfer at conductive oxide electrolyte interfaces

The kinetics for interfacial electron transfer (ET) from a transparent conductive oxide (tin-doped indium oxide, ITO, Sn:In 2 O 3 ) to molecular acceptors 4-[N,N-di(p-tolyl)amino]benzylphosphonic acid, TPA, and [Ru II (bpy) 2 (4,4' -(PO 3 H 2 ) 2 -bpy)] 2+ , RuP, positioned at variable distances within and beyond the electric double layer (EDL), were quantified in benzonitrile and methanol by nanosecond absorption spectroscopy as a function of the thermodynamic driving force, -ΔG ° . Relevant ET parameters such as the rate constant, k et , reorganization energy, λ, and electronic coupling, Hab, were extracted from the kinetic data. Overall, k et increased as the distance between the molecular acceptor and the conductor decreased. For redox active molecules within the Helmholtz planes of the EDL, k et was nearly independent of -ΔG° , consistent with a negligibly small λ value. Rips–Jortner analysis revealed a non-adiabatic electron transfer mechanism consistent with H ab < 1 cm -1 . The data indicate that the barrier for electron transfer is greatly diminished at the conductor–electrolyte interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Large-Eddy Simulation Study of Flow and Combustion Dynamics in a Full-Scale Hydrogen–Air Rotating Detonation Combustor-Stator Integrated System

In the present work, a first-of-its-kind three-dimensional (3D) large-eddy simulation (LES) study is conducted to numerically investigate the combustion dynamics as well as aero-thermal phenomena in a full-scale nonpremixed hydrogen–air rotating detonation engine (RDE) (with a diverging-shaped lower-end wall), when integrated with nozzle guide vanes (NGV) acting as the turbine stator. The wall-modeled LES framework incorporates hydrogen–air detailed chemical kinetics and adaptive mesh refinement (AMR). A comparative analysis is carried out for two operating conditions with different fuel/air mass flow rates but global equivalence ratio of unity, and considering RDE configurations without and with stator. The LES model is validated against available experimental data for the low mass flux condition with respect to detonation wave speed/height, wave dynamics, and axial static pressure distribution. Numerical results indicate significant deflagrative combustion occurring in the fill region near the inner wall due to formation of recirculation zones in the injection near-field driven by the backward facing step. The leading detonation wave is found to be trailed by an azimuthal reflected-shock combustion (ARSC) wave, consistent with experimental observations, which consumes unburned vitiated reactants that leak through the main detonation wave. The main detonation wave characteristics, such as detonation wave speed/height and combustion efficiency, do not change appreciably with the presence of NGV. A novel combustion diagnostic technique based on chemical explosive mode analysis (CEMA) is employed to quantify the fraction of heat release occurring in the detonative mode versus deflagrative mode for the simulated conditions. The exit flow is found to be nearly fully subsonic and supersonic for the low and high mass flux conditions, respectively. Further analysis of the exit flow profiles shows that the presence of NGV renders the flow more axial and significantly impacts the exit Mach number and total pressure, while the total temperature shows negligible change. In addition, the low mass flux operating point, despite exhibiting more deflagrative losses within the combustor, yields overall lower pressure drop from plenum to exhaust, which is mainly attributed to lower pressure drop across the injectors. Lastly, the rotating detonation engine-nozzle guide vanes (RDE-NGV) configuration exhibits higher total pressure loss compared to rotating detonation engine (RDE) without stator across both the mass flux conditions. In conclusion, this study extends the state-of-the-art in numerical modeling of pressure gain combustion (PGC) systems by demonstrating high-fidelity 3D reacting LES of full-scale RDE-NGV systems relevant to RDE-turbine integration for stationary power generation.

Combustion↗
DOE OSTI2026

Measurement of muon antineutrino charged current - 0 meson scattering, using the NOvA Near Detector

Antineutrino interaction cross sections are, at present, poorly constrained, particularly regarding the role of multi-nucleon processes such as 2-particle 2-hole (2p2h) interactions. The associated crosssection systematic uncertainties represent a significant challenge for precision oscillation measurements, especially for the next generation of neutrino experiments such as DUNE. We present a new measurement of the muon antineutrino charged-current cross section without mesons in the final state, using the high-statistics data set of the NOvA Near Detector. The analysis employs a cut-based selection enhanced by machine learning techniques to isolate a high-purity sample dominated by quasielastic (QE) and 2p2h interactions. We present the cross section as a function of the kinetic energy and scattering angle of the outgoing muon. We also present measurements of more model-dependent kinematic variables such as the neutrino energy and momentum transfer, to better probe the underlying nuclear physics. The results are compared against various neutrino event generators to test the robustness of current interaction models.

Vockerodt, Kevin John [Ohio State U.; Queen Mary, ↗
DOE OSTI2022

Environmental effects on aerosol–cloud interaction in non-precipitating marine boundary layer (MBL) clouds over the eastern North Atlantic

Abstract. Over the eastern North Atlantic (ENA) ocean, a total of 20 non-precipitating single-layer marine boundary layer (MBL) stratus and stratocumulus cloud cases are selected to investigate the impacts of the environmental variables on the aerosol–cloud interaction (ACIr) using the ground-based measurements from the Department of Energy Atmospheric Radiation Measurement (ARM) facility at the ENA site during 2016–2018. The ACIr represents the relative change in cloud droplet effective radius re with respect to the relative change in cloud condensation nuclei (CCN) number concentration at 0.2 % supersaturation (NCCN,0.2 %) in the stratified water vapor environment. The ACIr values vary from −0.01 to 0.22 with increasing sub-cloud boundary layer precipitable water vapor (PWVBL) conditions, indicating that re is more sensitive to the CCN loading under sufficient water vapor supply, owing to the combined effect of enhanced condensational growth and coalescence processes associated with higher Nc and PWVBL. The principal component analysis shows that the most pronounced pattern during the selected cases is the co-variations in the MBL conditions characterized by the vertical component of turbulence kinetic energy (TKEw), the decoupling index (Di), and PWVBL. The environmental effects on ACIr emerge after the data are stratified into different TKEw regimes. The ACIr values, under both lower and higher PWVBL conditions, more than double from the low-TKEw to high-TKEw regime. This can be explained by the fact that stronger boundary layer turbulence maintains a well-mixed MBL, strengthening the connection between cloud microphysical properties and the below-cloud CCN and moisture sources. With sufficient water vapor and low CCN loading, the active coalescence process broadens the cloud droplet size spectra and consequently results in an enlargement of re. The enhanced activation of CCN and the cloud droplet condensational growth induced by the higher below-cloud CCN loading can effectively decrease re, which jointly presents as the increased ACIr. This study examines the importance of environmental effects on the ACIr assessments and provides observational constraints to future model evaluations of aerosol–cloud interactions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2020

Residual Study: Testing Jupiter Atmosphere Models Against Juno MWR Observations

The Juno spacecraft provides unique close-up views of Jupiter underneath the synchrotron radiation belts while circling Jupiter in its 53-day orbits. The microwave radiometer (MWR) onboard measures Jupiter thermal radiation at wavelengths between 1.37 and 50 cm, penetrating the atmosphere to a pressure of a few hundred bars and greater. The mission provides the first measurements of Jupiter's deep atmosphere, down to ~250 bars in pressure, constraining the vertical distributions of its kinetic temperature and constituents. As a result, vertical structure models of Jupiter's atmosphere may now be tested by comparison with MWR data. Taking into account the MWR beam patterns and observation geometries, we test several published Jupiter atmospheric models against MWR data. Our residual analysis confirms Li et al.'s (2017, https://doi.org/10.1002/2017GL073159) result that ammonia depletion persists down to 50–60 bars where ground-based Very Large Array was not able to observe. We also present an extension of the study that iteratively improves the input model and generates Jupiter brightness temperature maps which best match the MWR data. A feature of Juno's north-to-south scanning approach is that latitudinal structure is more easily obtained than longitudinal, and the creation of optimum two-dimensional maps is addressed in this approach.

Zhimeng Zhang↗
DOE OSTI2026

Precision Kinematic Sunyaev--Zel'dovich Measurements Across Halo Mass and Redshift with DESI DR2 and ACT DR6: Part I. Luminous Red Galaxies

We present the most precise measurements of the kinetic Sunyaev-Zel'dovich (kSZ) effect around luminous red galaxies to date, detecting the signal at $18σ$ significance in both harmonic and configuration space. Our analysis cross-correlates 2.4 million spectroscopic LRGs from the Dark Energy Spectroscopic Instrument (DESI) DR2 sample with Data Release 6 (DR6) of the Atacama Cosmology Telescope (ACT). We develop a novel harmonic-space cross-correlation approach using momentum-weighted kSZ templates, yielding nearly uncorrelated bandpowers within a framework consistent with other large-scale structure analyses. By incorporating the LRG halo occupation distribution (HOD) and its uncertainty, we convert measured galaxy gas profiles into halo gas profiles and provide generalized Navarro-Frenk-White (GNFW) fitting profiles, providing empirical targets for tuning feedback efficiency in hydrodynamical simulations and for baryonic modeling in large-scale structure analyses. We find strong evidence that gas profiles do not trace dark matter, providing direct evidence for gas redistribution beyond gravitational collapse. Comparing to hydrodynamical simulations, our measurements favor feedback efficiencies exceeding those in the Battaglia profile, suggesting more efficient gas ejection in group-scale halos than previously predicted. Splitting by redshift, we detect the kSZ signal at SNR $\approx 5$--$10$ in each of four bins and find amplitude evolution consistent with the expected decline in mean halo mass at fixed comoving number density. Splitting by stellar mass, we study the scaling of kSZ amplitude with galaxy properties. Together with BGS and ELG measurements in Paper II, these results span $0.1 \lesssim z \lesssim 1.6$ across three galaxy populations, demonstrating the potential of spectroscopic kSZ to map circumgalactic gas and constrain baryonic feedback.

Qu, F. J. [KIPAC, Menlo Park; Stanford U., HEPL; S↗
DOE OSTI2023

Future of the MUSiC Experiment Data

The Measurements of Uranium Subcritical and Critical (MUSiC) experiment was a highly enriched uranium (HEU) experiment performed at the National Criticality Experiments Research Center (NCERC) executed between December 2020 and April 2021. The experiment intended to measure criticality and reactor kinetics parameters in a bare HEU system. The experiment concurrently measured radiation signatures from the system while utilizing different neutron source types. This was an attempt to benchmark both detectors and analysis techniques against one another for identical measurements. The experiment consisted of the Rocky Flats HEU hemi-shells constructed into ten configurations spanning between deeply subcritical (about 14 kgs) to supercritical (about 60 kgs). Two of the ten configurations were supercritical and the other eight were subcritical. The two supercritical configurations, often referred to as the critical configurations, were documented into an International Criticality Safety Benchmark Evaluation Project (ICSBEP) benchmark evaluation and submitted to the technical review group (TRG). The subcritical configurations of the MUSiC experiment were examined using three different detection systems. The systems include: the NoMAD He-3 neutron detector which consists of 15 He-3 tubes surrounded by a polyethylene matrix, a liquid scintillator system called the Rossi-α Measurement Rapid Organic Discriminating Detector (RAM-RODD), and a trans-stilbene organic scintillator array (OSCAR) provided by the University of Michigan. The NoMAD and RAM-RODD data are planned to be evaluated in two separate ICSBEP evaluations utilizing neutron noise methods such as Feynman Variance-to-Mean, Rossi-α and the pulsed neutron source method. Each of the subcritical configurations were examined using three different source types including: a Cf-252 source in the center, with only the intrinsic neutron source in the HEU, and with an external D-T neutron generator.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Sensitivity analysis for characterizing the impact of HNGD model on the prediction of hydrogen redistribution in Zircaloy cladding using BISON code

Hydrogen in zirconium cladding is able to precipitate into zirconium hydrides which impacts cladding integrity. The Hydride Nucleation-Growth-Dissolution (HNGD) model in the BISON code accounts for the precipitation and dissolution kinetics of hydride in Zircaloy material. This paper presents global sensitivity analyses of the HNGD model aiming to enhance our understanding of the hydride precipitation phenomena by quantifying the variance that key parameters have on the prediction of hydrogen behavior under various environmental conditions. Here, model predictions are compared to experimental data obtained under two different conditions: 1) with uniformly precharged specimens subjected to a linear thermal gradient, and 2) specimens precharged with a cathodically applied hydride rim at one end of the sample and subjected to an asymmetric thermal gradient. The Sobol sensitivity analysis identifies the key parameters in the HNGD model for both types of specimens. For linear temperature cases, the heat of transport dominates the accuracy of predictions when no precipitation occurs at the cold end, while Terminal Solid Solubility for Dissolution (TSSD) is the most important parameter when precipitation occurs. A large variation in the predicted hydrogen concentration profiles is found in the range of high TSSD due to the occurrence of precipitation. For asymmetric temperature cases, the solubility coefficient gives the largest impact on the predicted hydrogen distribution, as it determines the amount of solute hydrogen dissolved from the initially applied hydride rim. A large discrepancy in hydrogen distribution between simulations and experiments exists with the asymmetric specimens because BISON simulations fail to predict the precipitation of hydride at the cooler end. Comparative studies using former and updated models verifies the significant impact of the hydride growth mechanism on predicted hydrogen concentration profiles. In particular, when hydride initially exists, changes in TSSD generate a large variation in the predicted amount of precipitation by hydride growth, giving large uncertainty in predicting the hydrogen distribution over the sample length. The outputs characterize the significant impact of the hydride growth mechanism in the HNGD model on predicting hydrogen behavior, and improve the understanding of the precipitation of hydride in Zircaloy cladding within a range of expected environmental conditions. The analyses indicate work is still needed to improve the hydride solvus models in the BISON code to accurately predict experimentally observed hydride concentrations and distributions.

36 MATERIALS SCIENCE↗
NASA NTRS1983

Electrode kinetics of oxygen reduction - A theoretical and experimental analysis of the rotating ring-disc electrode method

In order to calculate most of the rate constants for the intermediate formation of H2O2 in the electroreduction of O2 to H2O, the theoretical treatments of the rotating ring-disc electrode method by Damjanovic et al. (1966, 1967), Bagotskii et al. (1968, 1969), and Wroblowa et al. (1976) are modified. Rotating ring-disc electrode experimental data obtained for O2 reduction in Pt in 0.55 M H2SO4 are used to illustrate the calculations of rate constants according to the above theoretical treatments. A simple reaction model as proposed by the first author is consistent with the experimental data. The results indicate that O2 (97 percent) reduces to H2O in a direct four-electron transfer reaction. The adsorption of O2 is probably the rate-determining step in the potential region more negative than 0.5 V vs. reversible hydrogen electrode.

Hsueh, K.-L.↗
DOE OSTI2023

Nucleation kinetics model for primary crystallization in Al–Y–Fe metallic glass

The high density of aluminum nanocrystals (>10 21 m -3 ) that develop during the primary crystallization in Al-based metallic glasses indicates a high nucleation rate (~10 18 m -3 s -1 ). Several studies have been advanced to account for the primary crystallization behavior, but none have been developed to completely describe the reaction kinetics. Recently, structural analysis by fluctuation electron microscopy has demonstrated the presence of the Al-like medium range order (MRO) regions as a spatial heterogeneity in as-spun Al 88 Y 7 Fe 5 metallic glass that is representative for the class of Al-based amorphous alloys that develop Al nanocrystals during primary crystallization. From the structural characterization, an MRO seeded nucleation configuration is established, whereby the Al nanocrystals are catalyzed by the MRO core to decrease the nucleation barrier. The MRO seeded nucleation model and the kinetic data from the delay time (τ) measurement provide a full accounting of the evolution of the Al nanocrystal density (N v ) during the primary crystallization under isothermal annealing treatments. Moreover, the calculated values of the steady state nucleation rates (J ss ) predicted by the nucleation model agree with the experimental results. Moreover, the model satisfies constraints on the structural, thermodynamic, and kinetic parameters, such as the critical nucleus size, the interface energy, and the volume-free energy driving force that are essential for a fully self-consistent nucleation kinetics analysis. In conclusion, the nucleation kinetics model can be applied more broadly to materials that are characterized by the presence of spatial heterogeneities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Integrative teaching of metabolic modeling and flux analysis with interactive python modules

Abstract The modeling of rates of biochemical reactions—fluxes—in metabolic networks is widely used for both basic biological research and biotechnological applications. A number of different modeling methods have been developed to estimate and predict fluxes, including kinetic and constraint‐based (Metabolic Flux Analysis and flux balance analysis) approaches. Although different resources exist for teaching these methods individually, to‐date no resources have been developed to teach these approaches in an integrative way that equips learners with an understanding of each modeling paradigm, how they relate to one another, and the information that can be gleaned from each. We have developed a series of modeling simulations in Python to teach kinetic modeling, metabolic control analysis, 13C‐metabolic flux analysis, and flux balance analysis. These simulations are presented in a series of interactive notebooks with guided lesson plans and associated lecture notes. Learners assimilate key principles using models of simple metabolic networks by running simulations, generating and using data, and making and validating predictions about the effects of modifying model parameters. We used these simulations as the hands‐on computer laboratory component of a four‐day metabolic modeling workshop and participant survey results showed improvements in learners' self‐assessed competence and confidence in understanding and applying metabolic modeling techniques after having attended the workshop. The resources provided can be incorporated in their entirety or individually into courses and workshops on bioengineering and metabolic modeling at the undergraduate, graduate, or postgraduate level.

Kaste, Joshua A. M.↗
DOE OSTI2023

Considerations for quantitative in situ X-ray powder diffraction studies of solid-state reactions

The importance of sample preparation in collecting high-fidelity powder diffraction data suitable for quantitative structure and phase analysis is well established. Such powder diffraction experiments are increasingly being appliedin situ, during reactions, to explore solid-state reactivity. When appliedin situ, X-ray diffraction is widely used to gain insight into the mechanism and kinetics, and to identify dynamic intermediate states. Here, using a model ion-exchange reaction (NaFeO 2 + LiCl → LiFeO 2 + NaCl), we show that sample preparation not only influences the fidelity of powder diffraction analysis but also impacts the observed reaction progress. Specifically, we found that the observed reaction progress can differ by ∼50% depending on the capillary sample preparation. Thus, forin situdiffraction studies of solid-state reactions, packing fraction is an important and previously unrecognized consideration that impacts reproducibility and fidelity of the reaction study.

Chemistry↗
DOE OSTI2021

IVEM Contributions to CINR Penn State MT17-12797: In situ Ion Irradiation to Add Irradiation Assisted Grain Growth to the MARMOT Tool

In-situ TEM experiments were performed at the IVEM-Tandem Facility in Argonne National Laboratory to study the irradiation-induced grain growth of nanocrystalline UO 2 and CeO 2 thin films using 1 MeV Kr ions at various temperatures from 50K to 1073K. The grain growth kinetics was studied under both irradiation and thermal annealing conditions. Bright field and dark field TEM images and diffraction patterns were systematically recorded as a function of temperature, irradiation dose and annealing time. A comprehensive grain growth data of UO 2 was collected for further analysis and for the implementation to the MARMOT tool.

36 MATERIALS SCIENCE↗