Search NASA⌕ Search

SEARCH · Search NASA

Results for “angle diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

ENERGY SPECTRUM OF ENERGETIC PARTICLES ACCELERATED BY SHOCK WAVES: FROM FOCUSED TRANSPORT TO DIFFUSIVE ACCELERATION

The focused transport equation (FTE) includes all the necessary physics for modeling the shock acceleration of energetic particles with a unified description of first-order Fermi acceleration, shock drift acceleration, and shock surfing acceleration. It can treat the acceleration and transport of particles with an anisotropic distribution. In this study, the energy spectrum of pickup ions accelerated at shocks of various obliquities is investigated based on the FTE. We solve the FTE by using a stochastic approach. The shock acceleration leads to a two-component energy spectrum. The low-energy component of the spectrum is made up of particles that interact with shock one to a few times. For these particles, the pitch angle distribution is highly anisotropic, and the energy spectrum is variable depending on the momentum and pitch angle of injected particles. At high energies, the spectrum approaches a power law consistent with the standard diffusive shock acceleration (DSA) theory. For a parallel shock, the high-energy component of the power-law spectrum, with the spectral index being the same as the prediction of DSA theory, starts just a few times the injection speed. For an oblique or quasi-perpendicular shock, the high-energy component of the spectrum exhibits a double power-law distribution: a harder power-law spectrum followed by another power-law spectrum with a slope the same as the spectral index of DSA. The shock acceleration will eventually go into the DSA regime at higher energies even if the anisotropy is not small. The intensity of the energy spectrum given by the FTE, in the high-energy range where particles get efficient acceleration in the DSA regime, is different from that given by the standard DSA theory for the same injection source. We define the injection efficiency {eta} as the ratio between them. For a parallel shock, the injection efficiency is less than 1, but for an oblique shock or a quasi-perpendicular shock it could be greater.

79 ASTRONOMY AND ASTROPHYSICS↗

Near-barrier quasielastic scattering as a sensitive tool to derive nuclear matter diffuseness

Quasielastic excitation functions for the {sup 16,18}O + {sup 60}Ni systems were measured at energies near and below the Coulomb barrier, at the backward angle {theta}{sub LAB} = 161 deg. The corresponding quasielastic barrier distributions were derived. The data were compared with predictions from coupled channel calculations using a double-folding potential as a bare potential. For the {sup 16}O-induced scattering, good agreement was obtained for the barrier distribution by using the projectile default nuclear matter diffuseness obtained from the Sao Paulo potential systematic, that is, 0.56 fm. However, for the {sup 18}O-induced scattering, good agreement was obtained only when the projectile nuclear matter diffuseness was changed to 0.62 fm. Therefore, in this paper we show how near-barrier quasielastic scattering can be used as a sensitive tool to derive nuclear matter diffuseness.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Recovering position-dependent diffusion from biased molecular dynamics simulations

All atom molecular dynamics (MD) models provide valuable insight into the dynamics of biophysical systems, but are limited in size or length by the high computational demands. The latter can be reduced by simulating long term diffusive dynamics (also known as Langevin dynamics or Brownian motion) of the most interesting and important user-defined parts of the studied system, termed collective variables (colvars). A few hundred nanosecond-long biased MD trajectory can therefore be extended to millisecond lengths in the colvars subspace at a very small additional computational cost. In this work, we develop a method for determining multidimensional anisotropic position- and timescale-dependent diffusion coefficients (D) by analysing the changes of colvars in an existing MD trajectory. As a test case, we obtained D for dihedral angles of the alanine dipeptide. An open source Mathematica{sup ®} package, capable of determining and visualizing D in one or two dimensions, is available at https://github.com/lbf-ijs/DiffusiveDynamics . Given known free energy and D, the package can also generate diffusive trajectories.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improved Modeling and Understanding of Diffusion-Media Wettability on Polymer-Electrolyte-Fuel-Cell Performance

A macroscopic-modeling methodology to account for the chemical and structural properties of fuel-cell diffusion media is developed. A previous model is updated to include for the first time the use of experimentally measured capillary pressure -- saturation relationships through the introduction of a Gaussian contact-angle distribution into the property equations. The updated model is used to simulate various limiting-case scenarios of water and gas transport in fuel-cell diffusion media. Analysis of these results demonstrate that interfacial conditions are more important than bulk transport in these layers, where the associated mass-transfer resistance is the result of higher capillary pressures at the boundaries and the steepness of the capillary pressure -- saturation relationship. The model is also used to examine the impact of a microporous layer, showing that it dominates the response of the overall diffusion medium. In addition, its primary mass-transfer-related effect is suggested to be limiting the water-injection sites into the more porous gas-diffusion layer.

08 HYDROGEN↗

SYNCHROTRON EMISSION DRIVEN BY THE CHERENKOV-DRIFT INSTABILITY IN ACTIVE GALACTIC NUCLEI

In the present paper, we study the generation of synchrotron emission by means of the feedback of Cherenkov-drift waves on the particle distribution through the diffusion process. Despite the efficient synchrotron losses, it is demonstrated that the excited Cherenkov-drift instability leads to the quasi-linear diffusion (QLD), the effect of which is balanced by dissipation factors and, as a result, the pitch angles are prevented from damping, thus maintaining the corresponding synchrotron emission. We analyze the model for a wide range of physical parameters and determine that the mechanism of QLD guarantees the generation of electromagnetic radiation from soft X-rays up to soft {gamma}-rays, which is strongly correlated with Cherenkov-drift emission ranging from IR up to UV energy domains.

79 ASTRONOMY AND ASTROPHYSICS↗

Processing-Dependent Structure and Poroelasticity of Nafion in Liquid Water

Ionomers act as the solid polymer electrolyte membrane in many modern electrochemical devices, yet the role of their nanostructure in modulating the poroelastic response remains poorly understood, especially in liquid water, where few techniques can measure simultaneous transport-mechanical properties. Poroelastic Relaxation Indentation (PRI) is uniquely suited for measuring time-dependent transport-mechanical properties of porous solids, specifically hydraulic diffusivity, elastic modulus, Poisson’s ratio, and intrinsic permeability, for porous solids. While ionomers such as Nafion are not porous in the typical sense, Nafion has a nanophase-segregated structure that, when fully swollen in liquid water, behaves as a poroelastic solid with a coupled mechanical-transport response. Using a poroelastic framework, we investigate how casting and pretreatment of Nafion membranes alter their poroelastic response in liquid environments. We characterize both extruded and dispersion-cast Nafion membranes pretreated in water at 25 or 100 °C and relate the mechanical-transport properties to the ionomer structure via hydrophilic and intercrystalline domain spacing measured using Small-Angle X-ray Scattering (SAXS). At 25 °C, dispersion-cast membranes exhibit distinctly lower hydraulic diffusivity and intrinsic permeability than extruded membranes but with comparable mechanical properties. Pretreatment at 100 °C increases hydrophilic domain spacing, improving transport but at the expense of mechanical stiffness. Dispersion-cast membranes respond more strongly to pretreatment than extruded membranes. Using the Carman-Kozeny pore network model and the hydrophilic domain-spacing, we estimate the pore radius and tortuosity to show how pretreatment reduces structure-related tortuosity differences between dispersion-cast and extruded membranes. Here, in this work, we show that nanophase-segregated materials such as Nafion can be rigorously characterized using poroelasticity, resulting in physically meaningful transport-mechanical properties. Coupling PRI with SAXS provides insights into the nanostructural features that govern the coupled mechanical-transport response. By establishing PRI for a nanophase-segregated material, this approach opens avenues for this technique’s application in other hydrated polymeric materials not typically considered to be poroelastic.

Shen, Margaret [University of California, Berkeley↗

Solute diffusion behavior during heat treatment and its impact in Sc-microalloyed Al-Cu system

Scandium (Sc) is a promising microalloying element that enhances the strength and thermal stability of aluminum (Al) alloys. However, these benefits are not fully realized in aluminum-copper (Al-Cu) systems, and corrosion resistance often declines due to the complex phase evolution and diffusion behavior of Cu and Sc. Here, to clarify this, solute diffusion behavior and Cu-Sc interaction during heat treatment (HT) were investigated using in situ synchrotron-based transmission x-ray microscopy (TXM), wide-angle x-ray scattering (WAXS), and x-ray absorption near-edge structure (XANES) spectroscopy. The results, supported by electron microscopy, reveal strong Cu-Sc bonding that significantly impedes solute diffusion, leading to inhomogeneous solute distribution and non-uniform precipitation. Moreover, the Al-Cu-Sc eutectic phase exhibits high thermal stability, resisting dissolution even near the matrix liquidus. These findings quantitatively elucidate the sluggish diffusion kinetics of Cu and Sc, which can help redesign HT schedules to improve both mechanical properties and corrosion resistance in Sc-microalloyed Al-Cu alloys.

36 MATERIALS SCIENCE↗

Resolution of a Few Problems in the Application of Quasilinear Theory to Calculating Diffusion Coefficients in Heliophysics

A theory of quasilinear diffusion for obliquely propagating electromagnetic waves was developed in the 1960's and applied in the 1970's to model scattering of relativistic electrons by a prescribed distribution of waves. In the latter work, a transformation of variables, from wavevector space to the temporal frequency and tangent of the wave normal angle, was used so that simple Gaussian functions of frequency and tangent of the wave normal angle could be multiplied together to define the distribution of wave power, although arbitrary distributions of power in these two variables is also permitted. Finally, in 2005, previous work was consolidated and has been widely used in heliophysics studies that require computation of quasilinear diffusion coefficients. Here it is shown that this transformation is inppropriate when the precise wave vector distribution is known. The correct transformation is derived and used to produce diffusion coefficients that can differ by orders of magnitude from those computed using the inappropriate transformation. The differences are largest when the distribution of wave power extends to wave normal angles near the resonance cone. When the ratio of the plasma frequency to the gyrofrequency is large, only low energies (keV) are affected, but as the ratio decreases higher energies (MeV) also show differences. It is also shown that the derivation from the 1960's uses a notation that results in the diffusion coefficients depending on the distribution of wave power with respect to the wave azimuthal angle whereas there should be no such dependence.

79 ASTRONOMY AND ASTROPHYSICS↗

Integrating carbon nanotube forests into polysilicon MEMS: Growth kinetics, mechanisms, and adhesion

The growth of carbon nanotubes (CNTs) on polycrystalline silicon substrates was studied to improve the design of CNT field emission sources for microelectromechanical systems (MEMS) applications and vacuum microelectronic devices (VMDs). Microwave plasma-enhanced chemical vapor deposition (PECVD) was used for CNT growth, resulting in CNTs that incorporate the catalyst particle at their base. The kinetics of CNT growth on polysilicon were compared to growth on Si (100) using the model of Deal and Grove, finding activation energies of 1.61 and 1.54 eV for the nucleation phase of growth and 1.90 and 3.69 eV for the diffusion-limited phase on Si (100) and polysilicon, respectively. Diffusivity values for growth on polysilicon were notably lower than the corresponding values on Si (100) and the growth process became diffusion-limited earlier. Evidence favors a surface diffusion growth mechanism involving diffusion of carbon precursor species along the length of the CNT forest to the catalyst at the base. Explanations for the differences in activation energies and diffusivities were elucidated by SEM analysis of the catalyst nanoparticle arrays and through wide-angle X-ray scattering (WAXS) of CNT forests. As a result, methods are presented to improve adhesion of CNT films during operation as field emitters, resulting in a 2.5× improvement.

36 MATERIALS SCIENCE↗

An accurate symplectic calculation of the inboard magnetic footprint from statistical topological noise and field errors in the DIII-D

Any canonical transformation of Hamiltonian equations is symplectic, and any area-preserving transformation in 2D is a symplectomorphism. Based on these, a discrete symplectic map and its continuous symplectic analog are derived for forward magnetic field line trajectories in natural canonical coordinates. The unperturbed axisymmetric Hamiltonian for magnetic field lines is constructed from the experimental data in the DIII-D [J. L. Luxon and L. E. Davis, Fusion Technol. 8, 441 (1985)]. The equilibrium Hamiltonian is a highly accurate, analytic, and realistic representation of the magnetic geometry of the DIII-D. These symplectic mathematical maps are used to calculate the magnetic footprint on the inboard collector plate in the DIII-D. Internal statistical topological noise and field errors are irreducible and ubiquitous in magnetic confinement schemes for fusion. It is important to know the stochasticity and magnetic footprint from noise and error fields. The estimates of the spectrum and mode amplitudes of the spatial topological noise and magnetic errors in the DIII-D are used as magnetic perturbation. The discrete and continuous symplectic maps are used to calculate the magnetic footprint on the inboard collector plate of the DIII-D by inverting the natural coordinates to physical coordinates. The combination of highly accurate equilibrium generating function, natural canonical coordinates, symplecticity, and small step-size together gives a very accurate calculation of magnetic footprint. Radial variation of magnetic perturbation and the response of plasma to perturbation are not included. The inboard footprint from noise and errors are dominated by m=3, n=1 mode. The footprint is in the form of a toroidally winding helical strip. The width of stochastic layer scales as (1/2) power of amplitude. The area of footprint scales as first power of amplitude. The physical parameters such as toroidal angle, length, and poloidal angle covered before striking, and the safety factor all have fractal structure. The average field diffusion near the X-point for lines that strike and that do not strike differs by about three to four orders of magnitude. The magnetic footprint gives the maximal bounds on size and heat flux density on collector plate.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Anomalous losses of energetic particles in the presence of an oscillating radial electric field in fusion plasmas

The confinement of energetic particles in nuclear fusion devices is studied in the presence of an oscillating radial electric field and an axisymmetric magnetic equilibrium. Here, it is shown that, despite the poloidal and toroidal symmetries, initially integrable orbits turn into chaotic regions that can potentially intercept the wall of the tokamak, leading to particle losses. It is observed that the losses exhibit algebraic time decay different from the expected exponential decay characteristic of radial diffusive transport. A dynamical explanation of this behaviour is presented, within the continuous time random walk theory. The central point of the analysis is based on the fact that, contrary to the radial displacement, the poloidal angle is not bounded and a proper statistical analysis can therefore be made, showing for the first time that energetic particle transport can be super-diffusive in the poloidal direction and characterised by asymmetric poloidal displacement. The connection between poloidal and radial positions ensured by the conservation of the toroidal canonical momentum, implies that energetic particles spend statistically more time in the inner region of the tokamak than in the outer one, which explains the observed algebraic decay. This indicates that energetic particles might be efficiently slowed down by the thermal population before leaving the system. Also, the asymmetric transport reveals a new possible mechanism of self-generation of momentum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shocks in unmagnetized plasma with a shear flow: Stability and magnetic field generation

A pair of curved shocks in a collisionless plasma is examined with a two-dimensional particle-in-cell simulation. The shocks are created by the collision of two electron-ion clouds at a speed that exceeds everywhere the threshold speed for shock formation. A variation of the collision speed along the initially planar collision boundary, which is comparable to the ion acoustic speed, yields a curvature of the shock that increases with time. The spatially varying Mach number of the shocks results in a variation of the downstream density in the direction along the shock boundary. This variation is eventually equilibrated by the thermal diffusion of ions. The pair of shocks is stable for tens of inverse ion plasma frequencies. The angle between the mean flow velocity vector of the inflowing upstream plasma and the shock's electrostatic field increases steadily during this time. The disalignment of both vectors gives rise to a rotational electron flow, which yields the growth of magnetic field patches that are coherent over tens of electron skin depths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast dynamics of a hydrogen-bonding glass forming liquid: Chemical exchange-induced spectral diffusion in 2D IR spectroscopy

Polarization-selective Two Dimensional Infrared (2D IR) and IR pump-probe spectroscopies have been performed on the hydrogen bonding glass forming liquid 2-biphenylmethanol doped with the long-lived vibrational probe phenylselenocyanate over a wide range of temperatures. The spectral diffusion seen in the 2D spectra was found to have a large polarization dependence, in large excess of what is predicted by standard theory. This anomaly was explained by decomposing the 2D spectra into hydrogen-bonding and non-bonding components, which exchange through large-angle orientational motion. By adapting chemical exchange theories, parameters for the component peaks were then calculated by fitting the polarization-dependent spectral diffusion and the pump-probe anisotropy. A model of highly heterogeneous exchange and orientational dynamics was used to explain the observed time dependences as a function of temperature on fast time scales. The experimental observations, the kinetic modeling, and physical arguments lead to the determination of the times for interconversion of slow dynamics structural domains to fast dynamics structural domains in the supercooled liquid as a function of temperature. The slow to fast domain interconversion times range from 40 ps at 355 K to 5000 ps at 270 K.

14 SOLAR ENERGY↗

INFRARED AND OPTICAL POLARIMETRY AROUND THE LOW-MASS STAR-FORMING REGION NGC 1333 IRAS 4A

We performed J- and R-band linear polarimetry with the 4.2 m William Herschel Telescope at the Observatorio del Roque de los Muchachos and with the 1.6 m telescope at the Observatorio do Pico dos Dias, respectively, to derive the magnetic field geometry of the diffuse molecular cloud surrounding the embedded protostellar system NGC 1333 IRAS 4A. We obtained interstellar polarization data for about three dozen stars. The distribution of polarization position angles has low dispersion and suggests the existence of an ordered magnetic field component at physical scales larger than the protostar. Some of the observed stars present intrinsic polarization and evidence of being young stellar objects. The estimated mean orientation of the interstellar magnetic field as derived from these data is almost perpendicular to the main direction of the magnetic field associated with the dense molecular envelope around IRAS 4A. Since the distribution of the CO emission in NGC 1333 indicates that the diffuse molecular gas has a multi-layered structure, we suggest that the observed polarization position angles are caused by the superposed projection of different magnetic field components along the line of sight.

79 ASTRONOMY AND ASTROPHYSICS↗

Molecular Simulations of Adsorption and Diffusion of RDX in IRMOF-1

In order to test the feasibility of using metal-organic frameworks (MOFs) to pre-concentrate explosive molecules for detection, molecular simulations of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) within IRMOF-1 were performed. Grand canonical Monte Carlo (GCMC) simulations were used to generate adsorption isotherms for pure RDX, RDX in dry air, and RDX in wet air. In addition to the isotherms, the GCMC simulations provide adsorption energies and density distributions of the adsorbates within the MOF. Molecular dynamics simulations calculate diffusivities and provide a detailed understanding of the change in conformation of the RDX molecule upon adsorption. The presence of dry air has little influence on the amount of RDX that adsorbs. The presence of wet air increases the amount of RDX that adsorbs due to favorable interactions between RDX and water. We found a Henry's law constant of 21.2 mol/kg/bar for both pure RDX and RDX in dry air. The RDX adsorption sites are located (i) in big cages, (ii) near a vertex, and (iii) between benzene rings. The energy of adsorption of RDX at infinite dilution was found to be - 9.2 kcal/mol. The distributions of bond lengths, bond angles and torsion angles in RDX are uniformly slightly broader in the gas phase than in the adsorbed phase, but not markedly so. The self-diffusivity of RDX in IRMOF-1 is a strong function of temperature, with an activation energy of 6.0 kcal/mol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radio Observations of the Double-relic Galaxy Cluster Abell 1240

We present LOFAR 120 - 168 MHz images of the merging galaxy cluster Abell 1240 that hosts double radio relics. In combination with the GMRT 595-629 MHz and VLA 2- 4 GHz data, we characterised the spectral and polarimetric properties of the radio emission. The spectral indices for the relics steepen from their outer edges towards the cluster centre and the electric field vectors are approximately perpendicular to the major axes of the relics. The results are consistent with the picture that these relics trace large-scale shocks propagating outwards during the merger. Assuming diffusive shock acceleration (DSA), we obtain shock Mach numbers of M = 2.4 and 2.3 for the northern and southern shocks, respectively. For M ≲ 3 shocks, a pre-existing population of mildly relativistic electrons is required to explain the brightness of the relics due to the high (> 10 per cent) particle acceleration efficiency required. However, for M ≳ 4 shocks the required efficiency is ≥ 1% and ≥ 0.5%, respectively, which is low enough for shock acceleration directly from the thermal pool. We used the fractional polarization to constrain the viewing angle to > 53±3° and > 39±5° for the northern and southern shocks, respectively. We found no evidence for diffuse emission in the cluster central region. If the halo spans the entire region between the relics (~ 1.8 Mpc) our upper limit on the power is P1.4 GHz = (1.4 ± 0.6) × 10 23 W Hz -1 which is approximately equal to the anticipated flux from a cluster of this mass. However, if the halo is smaller than this, our constraints on the power imply that the halo is underluminous

79 ASTRONOMY AND ASTROPHYSICS↗

A geometrical model for the description of the AlN shell morphology in GaN-AlN core-shell nanowires

A geometrical model based on the one formulated by Foxon et al.[J. Cryst. Growth 311, 3423 (2009)] is developed to describe the morphology of AlN shells in GaN-AlN core-shell nanowires grown by plasma-assisted molecular beam epitaxy. The shell aspect ratio is studied as a function of the atomic beam flux incidence angles and of the ratio between Al and N species. The comparison between experimental data and the developed geometrical model suggests the diffusion of about 55% of Al atoms from the side walls to the top surface.

36 MATERIALS SCIENCE↗