Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Evaluating the Rheo-electric Performance of Aqueous Suspensions of Oxidized Carbon Black

Here, the macroscopic properties of carbon black suspensions are primarily determined by the agglomerate microstructure built of primary aggregates. Conferring colloidal stability in aqueous carbon black suspensions should thus have a drastic impact on their viscosity and conductivity. Carbon black was treated with strong acids following a wet oxidation procedure. An analysis of the resulting particle surface chemistry and electrophoretic mobility was performed in evaluating colloidal stability. Changes in suspension microstructure due to oxidation were observed using small-angle X-ray scattering. Utilizing rheo-electric measurements, the evolution of the viscosity and conductivity of the carbon black suspensions as a function of shear rate and carbon content was thoroughly studied. The carboxyl groups installed on the carbon black surface through oxidation increased the surface charge density and enhanced repulsive interactions. Electrostatic stability inhibited the formation of the large-scale agglomerates in favor of the stable primary aggregates in suspension. While shear thinning, suspension conductivities were found to be weakly dependent on the shear intensity regardless of the carbon content. Most importantly, aqueous carbon black suspensions formulated from electrostatically repulsive primary aggregates displayed a smaller rise in conductivity with carbon content compared to those formulated from attractive agglomerates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the shear-induced microstructure of a smectite clay aqueous suspensions using rheo-USANS and rheo-SIPLI measurements

Hypothesis: The static microstructure of aqueous sodium-montmorillonite (Na-Mt) suspensions at low ionic strengths (where Particle Size/Debye Length ≈1) exhibits both the particle–particle ordering as well as aggregation with repulsive ordered domains having characteristic optical birefringence and attractive aggregated entities larger than 20 µm resulting in ever-increasing yield stresses also known as physical aging-rejuvenation behavior. We hypothesize that the attractive particle–particle aggregation is the underlying cause behind the physical aging-rejuvenation behavior observed in Na-Mt suspensions with no contribution from structural dynamics driven by repulsive particle–particle ordering or jamming. Experiments: We investigate the shear-induced microstructure of aqueous Na-Mt suspensions in the sol and gel state using rheo-ultra-small angle neutron scattering (rheo-USANS) experiments at shear rates of 1, 50, 500, and 2000 s −1 . We also perform rheo-shear-induced polarization light imaging (rheo-SIPLI) experiments to relate ordering with shearing and aging. Findings: Shearing the suspensions at low to moderate shear rates induces particle–particle aggregation and shearing at high shear rates induces the breakage of particle–particle aggregation in the sol and gel states, suggesting the microstructural aggregation in the sol and gel state is shear sensitive and a full rejuvenation or breakage of particle–particle aggregation is only achieved at a minimum critical shear rate. The rheo-SIPLI experiments reveal that the sol and gel state exhibited strong Maltese cross patterns at a shear rate of 1000 s −1 , indicating particle–particle ordering. Post shearing, the gel exhibited temporal evolution of storage modulus without any noticeable influence on the appearance of the Maltese cross pattern indicating physical aging and particle ordering are distinct length scale phenomena in Na-Mt suspensions and the physical aging-rejuvenation behaviour is a feature of particle–particle aggregation as opposed to ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Microchannel reactive distillation for the conversion of aqueous ethanol to ethylene

Here we demonstrate the proof-of-concept for microchannel reactive distillation for alcohol-to-jet application: combining ethanol/water separation and ethanol dehydration in one unit operation. Ethanol is first distilled into the vapor phase, converted to ethylene and water, and then the water co-product is condensed to shift the reaction equilibrium. Process intensification is achieved through rapid mass transfer—ethanol stripping from thin wicks using novel microchannel architectures—leading to lower residence time and improved separation efficiency. Energy savings are realized with integration of unit operations. For example, heat of condensing water can offset vaporizing ethanol. Furthermore, the dehydration reaction equilibrium shifts towards completion by immediate removal of the water byproduct upon formation while maintaining aqueous feedstock in the condensed phase. For aqueous ethanol feedstock (40% w ), 71% ethanol conversion with 91% selectivity to ethylene was demonstrated at 220 °C, 600 psig, and 0.28 h -1 wt hour space velocity. 2.7 stages of separation were also demonstrated, under these conditions, using a device length of 8.3 cm. This provides a height equivalent of a theoretical plate (HETP), a measure of separation efficiency, of ~3.3 cm. By comparison, conventional distillation packing provides an HETP of ~30 cm. Thus, 9.1× reduction in HETP was demonstrated over conventional technology, providing a means for significant energy savings and an example of process intensification. Finally, preliminary process economic analysis indicates that by using microchannel reactive distillation technology, the operating and capital costs for the ethanol separation and dehydration portion of an envisioned alcohol-to-jet process could be reduced by at least 35% and 55%, respectively, relative to the incumbent technology, provided future improvements to microchannel reactive distillation design and operability are made.

10 SYNTHETIC FUELS↗
DOE OSTI2021

Simultaneous immobilization of aqueous co-contaminants using a bismuth layered material

The remediation of co-located contaminants in the vadose zone can be challenging due to accessibility and different responses of different contaminants to remedial actions. At the Hanford Site (WA, USA), multiple contaminants are present in the vadose zone and groundwater, including I, Tc, U, Cr, and NO3. We used a bismuth layered oxide in a series of batch experiments to test aqueous removal of multiple contaminants, including Tc, Cr, and U, as well as potentially competing anions, including NO3 and I. The results demonstrated successful removal of all four contaminants (>98% removal from the aqueous phase after 30 days) when tested individually. When contaminants were combined, a slight decrease in Tc removal occurred (-6%). The addition of sediment decreased the removal for Tc and I, but U and Cr removal was unaffected. Competition with anions released from the sediment likely caused the decreased removal of Tc and I and indicated that bismuth is less selective for these two contaminants. The results of these batch tests demonstrated that the bismuth based oxy-hydroxide material is a promising material for sequestering multiple contaminants in situ.

Lawter, Amanda R.↗
DOE OSTI2024

Origin of deactivation of aqueous Na–CO 2 battery and mitigation for long-duration energy storage

Here, the development of long-duration energy storage technology is crucial to facilitate the efficient utilization of renewable energy sources while mitigating carbon dioxide production. In this study, we investigate the deactivation and reactivation mechanisms of the aqueous Na–CO 2 battery during extended cycling. We have designed the cathode to include non-precious intermetallic catalysts. As the cell undergoes repeated cycles, the voltage polarization during discharge progressively rises, eventually leading to the cell's deactivation and formation of decomposition products clogging the electrode surface. Results obtained from comprehensive characterization techniques, including conductive atomic force microscopy (cAFM), Raman spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and inductively coupled plasma-mass spectrometry provide insight into the decomposition products. We also showcase an electrochemical approach for regeneration of these aqueous cells. Our findings, along with the insights we have gained, provide a path toward creating long-duration systems with self-healing properties.

25 ENERGY STORAGE↗
DOE OSTI2025

200 h of discharge cycling with an all-aqueous copper thermally regenerative ammonia battery

Thermally regenerative ammonia batteries (TRABs) offer an approach to energy storage and electricity generation by harnessing low-grade heat (T < 150 °C). A TRAB discharge resembles that of a flow battery, where electrochemical reactions produce electrical power from energy stored within aqueous electrolytes. While there are many types of TRABs, the all-aqueous copper TRAB (Cu aq -TRAB) has produced the largest power and energy storage densities. Despite many improvements to TRAB performance, most tests have only lasted a few hours, which are not representative of operation times expected of these devices. Herein, we operated a Cu aq -TRAB for 200 h of constant current discharging to assess battery performance and component stability. After 200 h of testing, the average power density increased slightly to 7.2 mW cm -2 , which was within 0.01 % of starting conditions. Likewise, the average energy density for the final cycle was only 0.03 % lower than the initial cycle. The overall insensitivity of the power cell to cycling represents a major milestone in the advancement of TRAB systems. In conclusion, energy dispersive X-ray spectroscopy provides evidence to suggest that these small changes in power and energy density are likely to the membrane acclimating to TRAB electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2021

Thermodynamic analysis of hydrogel swelling in aqueous sodium chloride solutions

Here, a comprehensive thermodynamic model is presented for swelling and salt partitioning of poly (n-isopropyl acrylamide) hydrogels in aqueous sodium chloride (NaCl) solutions at 298 K. Together with a Helmholtz energy expression for network elastic energy, a modified electrolyte Nonradom Two-Liquid activity coefficient model is used to represent both the long-range electrostatic interactions and the short-range van der Waals interactions present in the gel phase. The model parameters include one network parameter per hydrogel system plus two binary parameters per interaction pair in the polymer–solvent-salt systems. With semiquantitave agreement with experimental data for both hydrogel swelling and salt partitioning up to salt saturation, the analysis suggests the ion hydration between NaCl and water is the root cause for hydrogel deswelling in aqueous NaCl solution at high NaCl concentrations, i.e., NaCl weight fraction >0.03. On the other hand, the strong repulsive interaction between NaCl and hydrogel polymer is the dominant factor for salt partitioning.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The apparent reversal of the Law of Mass Action in concentrated multicomponent aqueous solutions

Although it is well known that aqueous electrolyte solutions behave non-ideally, few are so non-ideal that adding an electrolyte to a saturated solution with a common ion enhances rather than depresses solubility. Nonetheless, this apparent reversal of the Law of Mass Action (LMA) has been observed in simple nitrate solutions at high concentrations. A leading hypothesis is that ion clusters are formed and stabilized by ions having different charge densities. We report the present study examines this concept, in part by reviewing relevant data from multicomponent aqueous solutions containing sodium nitrate (NaNO 3 ), sodium nitrite (NaNO 2 ), sodium hydroxide (NaOH), and sodium aluminate (NaAl(OH) 4 ) - the major constituents in alkaline nuclear waste. Here, NaOH and NaAl(OH) 4 did not enhance the solubility of NaNO 3 or NaNO 2 , whereas NaNO 2 and NaNO 3 enhanced rather than depressed the solubility of each other despite each having the sodium cation (Na + ) in common. Solutions evaluated in this study have more than 20 molal total Na + concentration, and most have less than one mole of water per mole of ion. Thus, this reversal of the LMA occurs in solutions where there is not enough water to fully hydrate the ions, pointing to the importance of ion cluster formation. Within the composition range of the solutions analyzed here, this reversal of the LMA occurs regardless of NaAl(OH) 4 and NaOH concentrations. Elevated temperatures also result in the reversal of the LMA in the subsystems NaNO 2 -NaNO 3 -H 2 O and NaOH-NaNO 3 -H 2 O, consistent with spectroscopic and computational studies showing enhanced interactions at higher temperatures. Although speciation in these highly concentrated electrolyte solutions is not well understood, the stabilization of ion clusters by: (i) optimizing charge density around the ions through different combinations of mixed cations and anions in solution; and (ii) high temperatures where ions experience prolonged contact, offers important clues for future research into how these species control solubility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Polyvinyl alcohol coating induced preferred crystallographic orientation in aqueous zinc battery anodes

The development of rechargeable aqueous zinc batteries is mainly hindered by the Zn anode, which suffers from dendrite growth, corrosion, hydrogen evolution, and surface passivation. Herein, a thin polyvinyl alcohol (PVA) coating layer on Zn anode has enabled dendrite-free, long-life aqueous Zn batteries by effectively regulating the interfacial ion diffusion and inducing the homogeneous Zn nucleation and deposition of stacked plates with preferentially crystallographic orientation along (002) Zn planes. The PVA@Zn anode achieved an ultralong cycle lifespan of thousands of hours at 0.25 and 1 mA cm -2 . Outstanding durability under a deep cycling capacity (5 mA h cm -2 ), high current density (10 mA cm -2 ), and long duration conditions were achieved. The superior cyclability of PVA@Zn anode was also demonstrated in PVA@Zn//V 2 O 5 full cells. In conclusion, the insights of PVA induced Zn deposition with preferred crystal orientation and interfacial regulation shed light on the future development of stable Zn anodes.

Crystallographic orientation↗
DOE OSTI2022

Effects of oxygen on the adsorption/oxidation of aqueous Sb(III) by Fe-loaded biochar: An X-ray absorption spectroscopy study

Fe-loaded biochar (FeBC) has been considered for Sb(III) adsorption, but the effects of oxygen (O 2 ) on the adsorption need further investigation. Liquid-/solid-phase analyses were conducted to investigate the role of O 2 in the Sb(III) adsorption by FeBC. The adsorption was best described by the pseudo-second-order (PSO) model for kinetic results and by the Langmuir model for thermodynamic results. More than 96.8 % of Sb(III) was adsorbed by FeBC, and available O 2 increased the liquid-phase Sb(III) oxidation efficiency by 2.1–7.5 times. The peak changes at ~1640 and 3450 cm -1 in FTIR spectra indicated the occurrence of inner-sphere complexation between Sb(III)/Sb(V) and hydroxyl (–OH)/carboxyl (–COOH) groups in FeBC under aerobic and anaerobic conditions. Fe/Sb X-ray absorption spectroscopy (XAS) analysis results showed aqueous Sb(III) complexed to the edge-sharing Fe(III)-O-Fe(III) in FeBC. Regardless of whether O 2 was available or not, solid-phase edge-sharing Fe(III)-O-Sb(V) complexes (~3.05 Å), which had lower toxicity and migration ability than aqueous Sb(III), formed through a ligand-to-metal charge-transfer (LMCT) process. More than 91 % of adsorbed Sb(III) was oxidized to edge-sharing Fe(III)-O-Sb(V) complexes in 3 h. Additionally, the Sb(V) from liquid-phase oxidation could also directly complex to the Fe(III)-O-Fe(III) and form edge-sharing Fe(III)-O-Sb(V) complexes. Here these results provide evidence to inform further FeBC application for the Sb-contaminated water treatment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Carbon dioxide capture with aqueous amino acids: Mechanistic study of amino acid regeneration by guanidine crystallization and process intensification

CO 2 capture from powerplant-generated flue gas via a phase-changing process involving absorption with aqueous amino acids (e.g., glycine or sarcosine) and bicarbonate crystallization with bis-iminoguanidines (e.g., glyoxal-bis-iminoguanidine or GBIG) is investigated in this paper. This process is of high interest due to its potential to decrease the energy penalty for CO 2 capture by significantly reducing the solvent regeneration energy typically associated with aqueous amine solvents. A critical step in the proposed CO 2 capture mechanism is the regeneration of the amino acid by removal of protons and bicarbonate ions from solution through crystallization of GBIGH 2 2+ bicarbonate salt. Here, we investigated the thermodynamics and kinetics of glycine regeneration by crystallization of GBIGH 2 2+ (HCO 3 – ) 2 (H 2 O) 2 . A theoretical model was developed and compared to experimental data to simulate and predict the glycine regeneration and determine its reaction mechanism. This combined experimental and theoretical study led to the conclusion that, while the GBIGH 2 2+ bicarbonate crystallization step provides most of the thermodynamic driving force for the glycine regeneration, the rate-limiting step is the protonation of GBIG prior to crystallization. The CO 2 loading and amino acid regeneration steps were combined into a single, intensified process using a bubble column reactor. The CO 2 loading capacity of GBIG was experimentally determined to be roughly 1.36 mol CO 2 per mol GBIG. These results provide the fundamental basis for developing an effective carbon capture technology with phase-changing amino acid/guanidine absorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Solvent-driven aqueous separations for hypersaline brine concentration and resource recovery

Solvent-driven separation processes can extract water and high-value minerals from high salinity or contaminated brines, simultaneously reducing the environmental impact of brine disposal and enabling resource recovery. The efficient dewatering of hypersaline brines is essential for the sustainable minimal and zero liquid discharge processing of industrial wastewaters. Fractional crystallization can selectively extract ions from contaminated waste streams, allowing critical materials to be recycled, including transition and lanthanide metals required for renewable energy generation and storage. Mass transfer in solvent-driven water extraction occurs across a liquid–liquid interface, eliminating the scaling and fouling of membrane and heat exchanger surfaces and limiting the need for extensive pretreatment. Solvent-driven fractional crystallization can leverage sequential treatment and control of process conditions to rapidly recover salts without requiring evaporation of water. Despite promising applications, the principles and potential of solvent-driven aqueous separations remain poorly understood. This critical review explores the opportunities presented by solvent-based aqueous separations from the molecular to process scale, evaluating the chemistry of solvation and system design in the broader context of desalination, resource recovery, water softening, and mineral production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

An ab initio free energy study of the reaction mechanism and rate-limiting steps of CO 2 capture by aqueous glycine

Aqueous amino acids are promising absorbents for direct air capture (DAC) of CO 2 . Herein, we investigate the possibility of kinetic control of CO 2 absorption with aqueous anionic glycine (GLY - ) by employing extensive ab initio molecular dynamics simulations, free energy analysis, and reaction rate theory. We find that first GLY - binds to CO 2 by overcoming a barrier (7.4 kcal/mol) to form a zwitterion intermediate, which then releases a proton by overcoming a similar barrier. Despite the similarity in the barrier, zwitterion formation appears to be the rate-limiting step because it is two orders of magnitude slower (microseconds) than the proton release step. This is predominantly due to stronger nonequilibrium solvent effects for the former that cause many barrier-recrossing events and effectively slow down the reaction rate. Such a detailed fundamental understanding of the amino acid-based CO 2 -absorption mechanism and rates is key to improving the kinetic efficiency of DAC technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanisms of proton transport in aqueous acid solutions

The fundamental understanding of proton transport, specifically the Grotthuss-like mechanism, is critical for many technological applications. The present study presents a comprehensive analysis of proton transport in aqueous solutions of sulfuric and phosphoric acids using quasielastic neutron and light scattering, broadband dielectric spectroscopy, rheology, pulsed-field gradient-NMR measurements, and ab initio molecular dynamic simulations. Results show that in all systems, proton transport occurs through short “jumps” of ~0.5 Å that are faster than structural relaxation. However, proton hopping appears to be coupled to structural relaxation in aqueous solutions of sulfuric acid, while these processes are decoupled in phosphoric acid. Neutron scattering indicates that all protons have the same fast mobility in phosphoric acid systems, while at least one proton per sulfuric molecule remains slower than other protons. Analysis reveals correlated proton jumps, but these correlations suppress conductivity, suggesting that expected Grotthuss-like enhancement of conductivity is unlikely in bulk liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Intercalation-Induced Amorphization Boosts Aqueous Magnesium-Ion Storage

The design of aqueous battery cathode materials that can store divalent ions with high capacity and satisfactory reversibility is of great technical importance and challenge. Here, we report that divalent Mg 2+ storage is facilitated by an intercalation-induced amorphization of vanadate electrode materials. Electrokinetic analyses and in situ synchrotron X-ray diffraction and absorption spectroscopy collectively demonstrate that vanadate layered materials (Li–V 3 O 8 ) undergo a structural transformation to amorphization induced by Mg 2+ intercalation, and a reversible restoration of crystalline structure upon Mg 2+ deintercalation. Debye scattering simulations suggest that intercalation-induced turbostratic disorder, especially random rotations, translational shifts, oscillatory motions, or varied interlayer spacing of adjacent V–O molecular layers, could be responsible for the observed amorphization. The highly distorted local structure, in turn, facilitates Mg 2+ intercalation across the vanadate electrode materials, responsible for nearly 3/7 of the total Mg 2+ ions intercalated. The study presented reveals an intriguing relationship between ion transport and the reversible amorphization-to-crystallization dynamics it induces, opening a paradigm for designing advanced aqueous battery electrodes.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Speciation and Aqueous Dissolution of Macronutrients in Fire Ash: Variation across Ecosystems and the Effects on Nutrient Cycling

This study investigated the speciation and aqueous dissolution of macronutrients in fire ash from diverse ecosystems and speciation of ash and smoke from laboratory burning, exploring the variations and their causes. The speciation of phosphorus (P), calcium (Ca), and potassium (K) in fire ash from five globally distributed ecosystems was characterized by using X-ray absorption spectroscopy and sequential fractionation. Aqueous dissolution of the macronutrients was measured by batch experiments at acidic and alkaline pHs. The results showed that P existed mainly as Ca phosphates, Ca as double carbonates, calcite, and sulfates, and most K was associated with Ca carbonates. Mineralogy and the relative abundance of the species were primarily controlled by elemental stoichiometry and fire temperature. Differences in Ca and P speciation existed between ash and smoke from laboratory burning, possibly caused by the temperature difference and/or mass fractionation during burning. The rates, extents, and pH dependencies of macronutrient dissolution differed among macronutrients and depended on their speciation, with K being highly soluble and the P and Ca regulated by solution pH. The variability in ash macronutrient chemistry and ecosystemspecific fire ash loads resulted in varying loads and availability of individual macronutrient from fire among ecosystems. This study provides a mechanistic understanding of how fires transform the chemistry of macronutrients and affect macronutrient returns to soils across different ecosystems, which is essential for evaluating the disturbance to ecosystem nutrient cycling by fires.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Liquefying Lignins: Determining Phase-Transition Temperatures in the Presence of Aqueous Organic Solvents

Under appropriate conditions of temperature and solvent composition, single-phase aqueous organic solvents are capable of liquefying lignin to form a lignin-rich liquid phase separate from the solvent phase, creating liquid–liquid equilibrium. The extent to which this phenomenon occurs when Kraft lignin is combined with the solvents methanol, ethanol, isopropanol, and acetone was determined, with solid–liquid (SL) to liquid–liquid (LL) phase-transition temperatures being measured over the range of applicable organic–water compositions. Lignins tested from a variety of biomass sources were all discovered to form this liquid–liquid equilibrium with aqueous ethanol solutions. Furthermore, the formation of such phase behavior between lignin and economical, green solvents creates new opportunities for the large-scale purification and fractionation of raw bulk (i.e., technical) lignins.

09 BIOMASS FUELS↗
DOE OSTI2021

Corrosion Prevention of Additively Manufactured Aluminum Packing Devices Developed for Process Intensification of CO 2 Capture by Aqueous Amines

Corrosion of additively manufactured (i.e., 3D printed) aluminum packing devices, developed to enhance heat and mass transfer in CO 2 absorption columns using amine-CO 2 scrubbing solutions, is investigated in this paper. The aluminum structures printed by selective laser melting with Al-10Si-0.3Mg feed powder are susceptible to corrosion in aqueous monoethanolamine, both fresh and used CO 2 -saturated solutions. The efficacy of corrosion-protective surface layers of aqueous polyether–ketone–ketone (PEKK) dip coating to provide amine corrosion resistance to the 3D printed aluminum structure is also evaluated. PEKK nanothick layers were coated on the corrugated surface of a 3D printed structure, identical to that of the intensified device, yielding 27 times higher corrosion resistance than the uncoated Al alloy surface. Finally, a systematic long-term electrochemical corrosion analysis revealed that a multilayer PEKK dip coating protocol enables protection of the 3D printed Al alloy surface in various CO 2 –monoethanolamine solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗