Search NASA⌕ Search

SEARCH · Search NASA

Results for “aqueous solvent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Probing the influence of ion-pairing on ligand-field excited-state dynamics

Exploration of the photophysical and photochemical properties of transition metal complexes has driven ground-breaking advancements in solar energy conversion technologies, including photoredox catalysis. While significant research has been devoted to understanding excited state properties of second- and third-row transition metal complexes, earth-abundant first-row metal complexes have received comparatively little attention in this context until very recently. In particular, the role of ion-pairing – which has been identified as a potentially significant factor for Ir(III)-based photosensitizers – has not been examined with regard to its influence on the ligand-field excited states that dominate much of first-row photophysics. A key challenge in studying ion-pair interactions lies in quantifying the extent and nature of ion-pairing, particularly in non-aqueous media where the vast majority of photophysical studies are performed. Cobalt(III) polypyridyl complexes provide an attractive platform to address such questions due to their demonstrated potential for applications in photoredox catalysis involving ligand-field excited states. In the present study, we prepared a cobalt(III) polypyridyl complex, [Co(4,4′-OMebpy) 3 ](BAr F 4 ) 3 (where 4,4′-OMebpy is 4,4′-dimethoxy-2,2′-bipyridine and BAr F 4 is tetrakis(3,5-bis(trifluoromethyl)-phenyl)borate) to probe ion-pairing in non-aqueous solutions. Specifically, analysis of data acquired from both variable-temperature diffusion ordered spectroscopy (DOSY) NMR and 1-D rotating-frame nuclear Overhauser effect (ROE) experiments allowed us to identify and differentiate between solvent-separated ion pairs in high-dielectric media and contact ion pairs in a low-dielectric solvent. Time-resolved absorption spectroscopy was then used to measure ground-state recovery dynamics under these varying conditions of ion-pairing, the results of which revealed an increase in excited-state lifetime for contact ion-pairs that we suggest arises from a reduction in outer-sphere reorganization energy relative to conditions which favored solvent-separated ion pairs. We believe this study demonstrates that one can leverage broadly available NMR-based methods to understand ion-pairing in non-aqueous solutions, which in turn can provide a microscopic picture of intermolecular interactions that can impact the photophysical properties of transition metal-based chromophores.

Ghosh, Atanu [Michigan State University, East Lans↗
DOE OSTI2021

Nuclear quantum effects on the quasiparticle properties of the chloride anion aqueous solution within the GW approximation

Photoelectron spectroscopy experiments in ionic solutions reveal important electronic structure information, in which the interaction between hydrated ions and water solvent can be inferred. Based on many-body perturbation theory with GW approximation, we theoretically compute the quasiparticle electronic structure of chloride anion solution, which is modeled by path-integral abinitio molecular dynamics simulation by taking account the nuclear quantum effects (NQEs). The electronic levels of hydrated anion as well as water are determined and compared with the recent experimental photoelectron spectra. It is found that NQEs improve the agreement between theoretical prediction and experiment because NQEs effectively weaken the hybridization of the between the Cl – anion and water. Furthermore, our study indicates that NQEs plays a small but non-negligible role in predicting the electronic structure of the aqueous solvation of ions of the Hofmeister series.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Direct Extraction of Sodium Hydroxide by Calix[4]pyrrole-Based Ion-Pair Receptors

Here, described in this work, are calix[4]pyrrole-based ion-pair receptors, cis/trans-1 and cis/trans-2, designed for the extraction of sodium hydroxide. An X-ray diffraction analysis of a single crystal of the cis-1·NaOH isomer isolated from a mixture of cis/trans-1 revealed a unique dimeric supramolecular structure. An average dimer in toluene-d 8 solution was inferred on the basis of diffusion-ordered spectroscopy (DOSY). Support for the proposed stoichiometry came from density functional theory (DFT) calculations. The structural stability of the dimeric cis-1·NaOH complex in toluene solution was further confirmed by ab initio molecular dynamics (AIMD) simulation with explicit representation of solvent. Under conditions of liquid–liquid extraction (LLE), purified receptors cis- and trans-2 were both found to remove NaOH from a pH 11.01 aqueous source phase into toluene with extraction efficiencies (E%) of 50–60% when used equimolar to NaOH. However, in all cases, precipitation was observed. Complexities associated with precipitation could be avoided by immobilization of the receptors onto a chemically inert poly(styrene) resin by means of solvent impregnation. The use of solvent-impregnated resins (SIRs) eliminated precipitation in solution while retaining the extraction efficiency toward NaOH. This allowed both the pH and salinity of the alkaline source phase to be lowered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Additive‐Free Aqueous MXene Inks for Thermal Inkjet Printing on Textiles

Abstract Direct printing of functional inks onto flexible substrates allows for scalable fabrication of wearable electronics. However, existing ink formulations for inkjet printing require toxic solvents and additives, which make device fabrication more complex, limit substrate compatibility, and hinder device performance. Even water‐based carbon or metal nanoparticle inks require supplemental surfactants, binders, and cosolvents to produce jettable colloidal suspensions. Here, a general approach is demonstrated for formulating conductive inkjet printable, additive‐free aqueous Ti 3 C 2 T x MXene inks for direct printing on various substrates. The rheological properties of the MXene inks are tuned by controlling the Ti 3 C 2 T x flake size and concentration. Ti 3 C 2 T x ‐based electrical conduits and microsupercapacitors (MSCs) are printed on textile and paper substrates by optimizing the nozzle geometry for high‐resolution inkjet printing. The chemical stability and electrical properties of the printed devices are also studied after storing the devices for six months under ambient conditions. Current collector‐free, textile‐based MSCs show areal capacitance values up to 294 mF cm −2 (2 mV s −1 ) in poly(vinyl alcohol)/sulfuric acid gel electrolyte, surpassing reported printed MXene‐based MSCs and inkjet‐printed MSCs using other 2D nanomaterials. This work is an important step toward increasing the functional capacity of conductive inks and simplifying the fabrication of wearable textile‐based electronics.

Uzun, Simge↗
DOE OSTI2023

Probing Complex Chemical Processes at the Molecular Level with Vibrational Spectroscopy and X-ray Tools

Understanding the origins of structure and bonding at the molecular level in complex chemical systems spanning magnitudes in length and time is of paramount interest in physical chemistry. Here, we have coupled vibrational spectroscopy and X-ray based techniques with a series of microreactors and aerosol beams to tease out intricate and sometimes subtle interactions, such as hydrogen bonding, proton transfer, and noncovalent interactions. This allows for unraveling the self-assembly of arginine-oleic acid complexes in an aqueous solution and growth processes in a metal–organic framework. Terahertz and infrared spectroscopy provide an intimate view of the hydrogen-bond network and associated phase changes with temperature in neopentyl glycol. The hydrogen-bond network in aqueous glycerol aerosols and levels of protonation of nicotine in aqueous aerosols are visualized. Future directions in probing the hydrogen-bond networks in deep eutectic solvents and organic frameworks are described, and we suggest how X-ray scattering coupled to X-ray spectroscopy can offer insight into the reactivity of organic aerosols.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Understanding the Influence of Water-Soluble Compounds from Unpretreated Corn Stover Pellets on Enzymatic Hydrolysis of Cellulose

Aqueous extractives are minor and non-structural compounds in biomass that can be extracted using solvents, while contributing significantly to lignocellulose characteristics. Yet their roles in enzyme-mediated processing of lignocellulosic biomass remain elusive. Here, we examine the composition and features of extractives derived from untreated pelleted corn stover as well as their effects on enzymatic hydrolysis. Unlike the observations described in previous reports, we find that water extractable material improves the enzymatic hydrolysis of extractive-free stover by 67% with a glucose yield increase from 12% to 20% with 6 FPU cellulase per g glucan, whereas the enzyme activities are diminished when using microcrystalline cellulose as a substrate. The different behavior of corn stover and microcrystalline cellulose is likely attributed to the presence of lignin, which may interact with inhibitory compounds such as phenolics, mitigating the detrimental impacts of soluble inhibitors or insoluble lignin or both. These findings advance our fundamental understanding of the intrinsic behavior of extractives and help to optimize the schemes for efficient and cost-competitive enzymatic conversion of lignocellulose.

09 BIOMASS FUELS↗
DOE OSTI2025

Direct Extraction of Uranium-Lanthanide Oxides in Tributyl Phosphate

Abstract Direct extraction of used nuclear fuel (UNF) in an organic solution could be more efficient than the previous practice with aqueous solutions. However, the UNF would need to be treated via voloxidiation before being processed using solvent extraction. The voloxidation process can form oxide and/or nitrate compounds. This work investigated the dissolution of uranium/lanthanide oxides in 30 vol % TBP diluted in dodecane (pre-equilibrated with 4 M nitric acid) in a glass reactor with air sparging to ascertain the uranium/lanthanide oxide dissolution behavior prior to scaling the process. The uranium/lanthanide oxides were prepared by co-precipitating uranium/lanthanide nitrates with hydroxide and then calcined to form a mixed oxide. While the relative concentrations of the lanthanides are not representative of used nuclear fuel, the neodymium and erbium allowed ease of tracking dissolution with visible spectroscopy. Cerium was used as a surrogate for plutonium. The dissolution rate of the oxides was similar but incomplete. A miniscule amount of cerium, as cerium oxide, took several months to slowly dissolve; however, when co-precipitated with uranium and other lanthanides, a significant amount of cerium dissolved readily.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Purification of Degraded Aqueous Piperazine by Ion Exchange and Carbon Treating

Amine purification by ion exchange and carbon treating has been performed for decades to maintain low solvent impurity levels in amines used in natural gas sweetening. The use of these purification methods to remove dissolved metal catalysts and other impurities from amines used in post-combustion carbon capture is less well known. This report presents batch experiments testing the equilibrium adsorption of impurities from degraded piperazine (PZ) onto activated carbon and various ion exchange resins. Compared to cationic exchange, anionic exchange was found to better remove catalytic Fe and UV active species, making it a better candidate for large-scale PZ purification. Carbon treating greatly outperforms anion exchange in the removal of UV active species, but the adsorbents’ difference is less pronounced for the removal of other impurities. Equilibrium adsorption was determined by the UV absorption of the PZ solution at 320 nm, and the results will show this may not be an accurate way to determine equilibrium. Further bench-scale experiments comparing ion exchange and carbon treating are necessary before advancing to larger-scale testing.

amine purification↗
DOE OSTI2021

Mechanistic study of pH effect on organic solvent nanofiltration using carboxylated covalent organic framework as a modeling and experimental platform

Covalent organic framework (COF) membranes for organic solvent nanofiltration (OSN) have attracted growing interest due to their high stability, well-defined pore size, and controllable pore functionality. In aqueous nanofiltration processes, solution pH has a significant effect on membrane permeability, selectivity, and fouling. However, our understanding of pH effects on OSN processes is still limited. In this work, we present experimental and reactive force field molecular dynamics (ReaxFF MD) simulation results on the effect of pH on OSN using a well-characterized carboxylated COF (C-COF) membrane. Filtration experimental and modeling results both demonstrate that pH changes can affect solvent permeance and solute rejection dramatically. Specifically, methanol permeance decreases with the increase of NaOH and HCl concentration, respectively. When Alcian Blue dye was used as the solute in methanol, the selectivity increased from 23% to 98% when changing the feed pH from 2.2 to 10.1, respectively. While ReaxFF MD results show that C-COF solvated pore size is only marginally affected by the pH of solution, methanol diffusion is affected by the size of methanol-solvated Na + and Cl - ions, which increase with increasing Na + and Cl - concentrations. Solution pH change also affected solute solvation layer thicknesses and C-COF pore charges, contributing to the significant AB dye selectivity increase with pH increase. To summarize, we have shown that dramatic changes in C-COF selectivity are not anomalous in OSN, but are instead controllable by varying feed solution pH to modify solvated solute radii and surface charge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Titanium Carbide MXene Hole Contacts for CdTe Photovoltaics

CdTe is a high‐efficiency thin‐film photovoltaic technology that has seen tremendous commercial success over the past decade. Yet despite the improvement of other device characteristics, the fabrication of an ohmic hole back contact layer has remained a challenge due to the high ionization potential of CdTe, which limits the external potential that can be feasibly reached even as other characteristics of the device improve. MXenes, a family of 2D materials with rapidly growing scientific and commercial interest, offer a promising route to forming low‐cost, low‐barrier contacts due to their demonstrated high work function, metallic conductivity, and facile solution processing from benign solvents. Here, it is shown that Ti 3 C 2 T x MXene films processed from an aqueous colloidal dispersion can perform as a highly efficient hole contact material for CdTe solar cells, resulting in high power‐conversion efficiencies. The role of the Schottky barrier formation in Ti 3 C 2 T x ‐contacted CdTe devices is probed, and potential pathways for the future development of this potent combination of materials are elucidated. The modularity of the expansive MXene family of materials presents a promising strategy for developing next‐generation hole contacts for CdTe solar cells.

14 SOLAR ENERGY↗
DOE OSTI2022

Liquid-Phase Effects on Adsorption Processes in Heterogeneous Catalysis

Aqueous solvation free energies of adsorption have recently been measured for phenol adsorption on Pt(111). Endergonic solvent effects of ~1 eV suggest solvents dramatically influence a metal catalyst’s activity with significant implications for the catalyst design. However, measurements are indirect and involve adsorption isotherm models, which potentially reduces the reliability of the extracted energy values. Computational, implicit solvation models predict exergonic solvation effects for phenol adsorption, failing to agree with measurements even qualitatively. In this study, an explicit, hybrid quantum mechanical/molecular mechanical approach for computing solvation free energies of adsorption is developed, solvation free energies of phenol adsorption are computed, and experimental data for solvation free energies of phenol adsorption are reanalyzed using multiple adsorption isotherm models. Explicit solvation calculations predict an endergonic solvation free energy for phenol adsorption that agrees well with measurements to within the experimental and force field uncertainties. Computed adsorption free energies of solvation of carbon monoxide, ethylene glycol, benzene, and phenol over the (111) facet of Pt and Cu suggest that liquid water destabilizes all adsorbed species, with the largest impact on the largest adsorbates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

“Water–in–Eutectogel” Electrolytes for Quasi–Solid–State Aqueous Lithium–Ion Batteries

The development of high safety lithium-ion batteries (LIBs) is greatly impeded by the flammability and leakage concerns of typical organic solvent-based electrolytes. As one of the alternative classes of electrolytes, hydrogel electrolytes exhibit high safety, high flexibility, low cost, and are benign to the environment. However, the narrow electrochemical stability window (ESW) of typical hydrogel electrolytes restricts the operating voltage of battery cells. Here, a new class of “water-in-eutectogel (WiETG)” electrolyte is reported, fabricated by combining a hydrogel with a “deep eutectic solvent” (LiTFSI in acetamide). The obtained WiETG electrolyte exhibits non-flammability, high ionic conductivity, and a wide ESW. LiMn 2 O 4 ||Li 4 Ti 5 O 12 cells with the WiETG electrolyte exhibit good cycling stability, high flexibility, and high safety. This newly developed WiETG electrolyte not only broadens the ESW of typical hydrogel electrolytes, but also opens a new perspective on future directions and guidance for the design of high safety electrolytes for flexible LIBs and beyond.

25 ENERGY STORAGE↗
DOE OSTI2025

Production of a δ-Lactam from Glucose through Integrating Biological and Chemical Catalysis

We present a new strategy for the production of a δ-lactam from glucose that integrates biological production of triacetic acid lactone (TAL, 4-hydroxy-6-methyl-2H-2-one) with catalytic transformation of TAL into 6-methylpiperidin-2-one (MPO) through metabolic engineering, isomerization, amination, and catalytic hydrogenation/hydrogenolysis. We developed a sustainable and antibiotic-free fed-batch fermentation using genetically modified Rhodotorula toruloides IFO0880. This process achieved a yield of 2-hydroxy-6-methyl-4H-pyran-4-one (2H4P) at 0.05 g/g of glucose, corresponding to a 9.9 g/L titer. By adjusting the pH of the fermentation broth to 2, 2H4P was quantitatively converted into TAL. The TAL in the fermentation broth was directly converted by aminolysis into 4-hydroxy-6-methylpyridin-2(1H)-one (HMPO), which achieved an 18.5% yield with 94.3% purity. The HMPO yield was lower in the fermentation broth than in a clean feedstock (32.2%), suggesting that the biological impurities are inhibitors in this reaction. Further investigation revealed that lower pH levels and reduced TAL concentrations in the fermentation broth significantly decreased HMPO yields. Subsequently, the precipitated HMPO was filtered and dried and then subjected to the final catalytic conversion in H2O solvent, achieving a MPO yield of 91.8%. Furthermore, this integrated approach demonstrated the direct use of TAL in the filtered aqueous fermentation broth without the need to isolate TAL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Minimal implicit-solvent coarse-grained simulation of Pluronic block copolymers with ionic liquids

Pluronic block copolymers, composed of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) in a triblock structure (PEO–PPO–PEO), are well known for their amphiphilic character and ability to self‐assemble into micelles in aqueous solution. The addition of ionic liquids (ILs) can further modulate the core–shell structures of these copolymers, influencing their stability, critical micellization temperature, and size. However, fully atomistic simulations often become prohibitively expensive due to the size and complexity of these systems. In this work, coarse‐grained simulations using a minimal implicit‐solvent model were performed to examine how two classes of ILs, namely, 1‐alkyl‐3‐methylimidazolium ([C n C 1 im]) and 1‐alkyl‐3‐methylpyrrolidinium ([C n C 1 pyrr]), change the micellization of Pluronic block copolymers in aqueous solution. The effects of IL concentration and alkyl group length were investigated, and the model greatly improved the efficiency of simulating large‐scale micelle systems. Furthermore, the numerical simulations are qualitatively compared with experimental investigations. Our results show that adding ILs expands the micelle core by embedding IL tails among the PPO blocks, thereby increasing overall micelle size. Less polar ILs generally induce more pronounced micellar growth. However, the effect of IL tail length on conformation and micellar packing is non‐monotonic. Up to moderate chain lengths (around C8–C10), the IL tails can extend sufficiently to increase local separation within the micelle; at longer tail lengths, enhanced hydrophobic clustering and steric hindrance cause the tails to bend or fold, capping further expansion. In addition, although block copolymer chains tend to pack more closely in the presence of longer‐tailed ILs, the random coil size of an individual polymer chain does not necessarily shrink. Meanwhile, these insights provide a deeper understanding of how Pluronic/IL systems interact, informing applications in drug delivery, cosmetics, food, and environmental engineering. Finally, our minimal implicit‐solvent model can be applied to larger systems and longer timescales, substantially reducing computational cost while reproducing key structural trends observed experimentally.

Atomistic simulations↗
DOE OSTI2021

Solution and Interface Structure and Dynamics in Geochemistry: Gateway to Link Elementary Processes to Mineral Nucleation and Growth

Our understanding of the process of mineral nucleation is starting to evolve from the solely thermodynamical aspects in classical nucleation theory toward a mechanistic study of reactions influenced by solvation structures of ions and their dynamics. A knowledge of how these atomic and molecular interactions respond to changing solution composition and/or the nature of an interface will form a fundamental foundation to understand rate-limiting reactions and processes for nucleation and growth. Here, we review recent advances from multidisciplinary experimental and computational approaches of the structure and dynamics of aqueous solutions and mineral–liquid interfaces that will influence rates of nucleation (and growth behavior) both homogeneously in aqueous solutions and heterogeneously at mineral–liquid interfaces. Furthermore, these processes include structure (and extent) of solute clustering, solvent degrees of freedom, and the presence of noninnocent charge-balancing ions, all of which can drive the selectivity and exert control over nucleation mechanisms. Similar controlling reactions can also occur at interfaces with the added complexities of how solute ions interact with and assemble on surface sites and use different mechanisms from bulk solutes, such as lateral solvent exchanges between distinct surface sites. To gain a predictive understanding of nucleation chemistry, we emphasize several key knowledge gaps that will need to be addressed in this field and highlight the importance of combining computations and experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Understanding Metal–Organic Framework Nucleation from a Solution with Evolving Graphs

A mechanistic understanding of metal–organic framework (MOF) synthesis and scale-up remains underexplored due to the complex nature of the interactions of their building blocks. In this work, we investigate the collective assembly of building units at the early stages of MOF nucleation, using MIL-101(Cr) as a prototypical example. Using large-scale molecular dynamics simulations, we observe that the choice of solvent (water and N,N-dimethylformamide), the introduction of ions (Na+ and F–) and the relative populations of MIL-101(Cr) half-secondary building unit (half-SBU) isomers have a strong influence on the cluster formation process. Additionally, the shape, size, nucleation and growth rates, crystallinity, and short and long-range order largely vary depending on the synthesis conditions. We evaluate these properties as they naturally emerge when interpreting the self-assembly of MOF nuclei as the time evolution of an undirected graph. Solution-induced conformational complexity and ionic concentration have a dramatic effect on the morphology of clusters emerging during assembly. While pure solvents lead to the rapid formation of a small number of large clusters, the presence of ions in aqueous solutions results in smaller clusters and slower nucleation. This diversity is captured by the key features of the graph representation. Principle component analysis on graph properties reveals that only a small number of molecular descriptors is needed to deconvolute MOF self-assembly. Furthermore, descriptors such as the average coordination number between half-SBUs and fractal dimension are of particular interest as they can be can be followed experimentally by techniques like by time-resolved spectroscopy. Ultimately, graph theory emerges as an approach that can be used to understand complex processes revealing molecular descriptors accessible by both simulation and experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Solvent-Cast Solid Electrolyte Membranes Based on a Charged Rigid-Rod Polymer and Ionic Liquids

Solid-state electrolytes are attractive for use in electrochemical devices because they remove the need for a flammable liquid electrolyte while contributing to the structural integrity of the device. We have recently developed a class of solid electrolytes, termed molecular ionic composites (MICs), composed of ionic liquids (ILs) and a rigid-rod polyelectrolyte, poly(2,2'-disulfonyl-4,4'-benzidine terephthalamide) (PBDT). MIC materials, originally obtained through an ion-exchange process between IL and PBDT aqueous solution, possess an unprecedented combination of high ionic conductivity, high thermal stability, low flammability and widely tunable tensile storage moduli. Here we present a facile solvent casting method for preparing MIC membranes. These membranes are uniform, flexible, and tough, with tunable composition and thickness (≥ 40 μm). Unlike the previous ion-exchange method, which only allowed incorporation of hydrophilic ILs, we can now incorporate hydrophobic ILs to prepare MIC membranes for, e.g. battery electrolytes. A sodium (Na) metal symmetric cell constructed with a PBDT-Pyr 14 TFSI membrane as the solid electrolyte shows long-term stable cycling (> 500 h.) at 60 °C. Furthermore, the ability to prepare MICs using both hydrophilic and hydrophobic ILs initiates a wider range of MIC materials and broadens the array of applications accessible by MIC membranes.

25 ENERGY STORAGE↗
DOE OSTI2021

Extraction and separation of iridium(Ⅳ) and rhodium(Ⅲ) from hydrochloric acid media by a quaternary ammonium-based hydrophobic eutectic solvent

We report the extraction and separation of iridium(IV) and rhodium(III) from hydrochloric acid solutions by a hydrophobic eutectic solvent composed of tetraheptylammonium chloride and decanoic acid have been studied for the first time. This eutectic solvent selectively extracts iridium(IV) over rhodium(III), the highest separation factor obtained is approximately 20. The effects of the main experimental factors (shaking time, the volume ratio of aqueous to organic phase, hydrochloric acid concentration, and the initial metal concentration in the aqueous phase) on the extraction behavior of iridium(IV) and rhodium(III) have been investigated. Ultraviolet–visible (UV–Vis) spectroscopy was applied to reveal the [IrCl 6 ] 2- complex to be a predominant species attributed to iridium(IV) extraction. To understand the underlying extraction mechanism, the initial iridium(IV) concentration in the aqueous phase has been varied and a corresponding mathematical model has been developed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗