Search NASA⌕ Search

SEARCH · Search NASA

Results for “arc tracking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

The Influence of Shielding Gas on the Wire-Arc Additive Manufacturing (WAAM) of Ni-Based Superalloy Haynes 282

Wire-arc additive manufacturing (WAAM) enables building large near-net-shaped parts using fast deposition rates and is attractive due to the potential cost and schedule savings. Haynes® 282® is a Ni-based superalloy with wide application in advanced power generation systems for its superior high temperature mechanical properties. High-quality WAAM H282 parts are achieved through careful process optimization, hence, we have focused on systematically characterizing the processing-structure-properties relationships over a wide range of wire-feed and travel speeds using a standard Ar30He shielding gas. Here the influence of adding 0.25-3% of H2 and CO2 to Ar-30He standard on our findings is examined. Multi-bead tracks were used to screen 20+ gas combinations to examine impact on wettability, porosity, oxidation, and grain structures. Improved multi-tracks are observed for gases with up to 1% H2 and 0.25% CO2. WAAM H282 builds within this range are examined to reveal differences in microstructure as evaluated with CT, SEM-EDS, and EBSD.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Radioimaging for real-time tracking of high-voltage breakdown

Development of a radioimaging diagnostic for high-voltage component reliability testing and electrical breakdown computational model validation is described. Radioimaging has its roots in radio astronomy, where aperture synthesis (also known as synthesis imaging) has been utilized for decades to image radio sources far from Earth. Radioimaging as described herein, in contrast, seeks to image radio sources in close proximity to its receivers (i.e., in a laboratory environment). Here it is shown that corona discharge, a non-destructive precursor to catastrophic (thermal) arc discharge, electromagnetically radiates strongly within a 250 kHz – 2.5 GHz bandwidth, and is readily detected and located by postprocessing the received radio signals. The ability of radioimaging to detect both corona and arc discharge (grouped together herein as high voltage breakdown or HVB) makes it a valuable tool for 100% HVB detection in materials, components, and devices, and has the ability to indicate electrical weakness (via corona detection) prior to a destructive arc discharge event. Radioimaging enables HVB to be located both internal and external to dielectric components under test in near-real-time, with multiple and/or extended HVB events located simultaneously. In contrast, existing non-destructive diagnostics (at the time of this writing) either indicate electrical breakdown without resolving failure locations (e.g., current, voltage, and chemical measurements), locate external HVB (e.g., high-speed optical and ultraviolet (UV) measurements or photography), or locate both external and internal HVB but with low fidelity (e.g., a single HVB source can be located by existing time-of-arrival (TOA) UHF or acoustic emissions). Radioimaging instead creates a sequence of high-fidelity images similar to an optical high-speed camera but at radiofrequencies (RF), and is not limited to two-dimensions. Moreover, radioimaging has already served one internal and two external industry customers, the results of which are detailed in this report. The radioimaging results described herein were part of a three-year effort funded by the Sandia Lab Directed Research and Development (LDRD) program within the Radiation, Electromagnetic, High Energy Density Science (REHEDS) investment area.

47 OTHER INSTRUMENTATION↗
NASA NTRS1986

Precise positioning capabilities for TOPEX using differential GPS

NASA's Ocean Topographic Experiment (TOPEX), to be launched in 1991, is the first mission designed to reach the decimeter accuracy needed for the solution of the general mean circulation problem. An experimental tracking capability for TOPEX is studied using differential measurements with satellites of the U.S. DOD's Global Positioning System (GPS). Two data types are studied: (1) integrated Doppler from GPS carrier phase, and (2) GPS P-code pseudo-range. Results of covariance analysis predict that with differential GPS techniques, 5-10 cm average TOPEX altitude accuracies can be achieved over data arcs of two hours.

Lichten, S. M.↗
NASA NTRS1991

NASA/Ames Research Center DC-8 data system

In-flight facility data acquisition, distribution, and recording on the NASA Ames Research Center (ARC) DC-8 are performed by the Data Acquisition and Distribution System (DADS). Navigational and environmental data collected by the DADS are converted to engineering units and distributed real-time to investigator stations once per second. Selected engineering units data are printed and displayed on closed circuit television monitors throughout flights. An in-flight graphical display of the DC-8 flight track (with barbs indicating wind direction and magnitude) has recently been added to the DADS capabilities. Logging of data run starts/stops and commentary from the mission director are also provided. All data are recorded to hard disk in-flight and archived to tape medium post-flight. Post-flight, hard copies of the track map and mission director's log are created by the DADS. The DADS is a distributed system consisting of a data subsystem, an Avionic Serial Data-to-VMEbus (ASD2VME) subsystem, and a host subsystem. Each subsystem has a dedicated central processing unit (CPU) and is capable of stand-alone operation. All three subsystems are housed in a single 20-slot VME chassis and communicate with each other over the VMEbus. The data and host subsystems are briefly discussed, and the DC-8 DADS internal configuration and system block diagram are presented.

Cherniss, S. C.↗
DOE OSTI2020

A Discrete Dendrite Dynamics Model for Epitaxial Columnar Grain Growth in Metal Additive Manufacturing with Application to Inconel

Epitaxial columnar grain growth is a prevalent microstructural feature in the additive manufacturing (AM) of metal components such as Inconel, with cubic unit cell crystal lattice structure (face centered cubic (FCC) or body centered cubic (BCC)). These columnar grains evolve from the partly molten grains in the substrate or the solidified metal. This work proposes an efficient model to simulate the competitive growth of epitaxial columnar dendritic grains. The proposed model tracks the dynamic changes in the dendrites emanating from discrete points along the solid/liquid interface of a quasi-steady melt pool (MP). These dynamic changes include convergence and divergence of growing dendrites. The model is extended to predict the microstructure of large 3D parts and experimentally validated by comparing the simulation results for laser powder bed fusion (L-PBF) and wire-arc additive manufacturing (WAAM) processes. The microstructure and pole figures are predicted for Inconel 718 samples produced by L-PBF and Inconel 740H samples produced by WAAM processes. Finally, the model predictions compare well with the observed microstructure and pole figures results for both the L-PBF and WAAM processes.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS1983

Image motion compensation by area correlation and centroid tracking of solar surface features

An experimental solar correlation tracker was tested and evaluated on a ground-based solar magnetograph. Using sunspots as fixed targets, tracking error signals were derived by which the telescope image was stabilized against wind induced perturbations. Two methods of stabilization were investigated; mechanical stabilization of the image by controlled two-axes motion of an active optical element in the telescope beam, and electronic stabilization by biasing of the electron scan in the recording camera. Both approaches have demonstrated telescope stability of about 0.6 arc sec under random perturbations which can cause the unstabilized image to move up to 120 arc sec at frequencies up to 30 Hz.

Nein, M. E.↗
NASA NTRS1977

Experiments for improved positioning by means of integrated Doppler satellite observations and the NNSS broadcast ephemeris

An effort to improve station position recovery using broadcast ephemeris in Doppler data reduction was studied. A comparison of precise and broadcast ephemerides, treating the former as the standard, yielded information about the state disturbance that can be associated with the broadcast ephemeris. Statistical information about the state disturbance was used with current observational data for improved position recovery. The rank deficiency problem encountered in the short arc geodetic adjustment procedure was analysed and it was deduced that the fundamental rank deficiency is six, scale information being derivable from the wavelength of transmission. Coordinate differences between stations coobserving a pass are estimable. The uncertainty of the broadcast ephemeris, now in the WGS72 system, was assessed. It was conservatively estimated that its positional uncertainty may vary between 19 to 26 m in-track, 15 to 20 m cross-track and 9 to 10 m in radial directions depending on the incidence of the epoch of observations in the interinjection period.

Arur, M. G.↗
NASA NTRS2008

Search for O VI Emission from the Shocked Circurmstellar Gas of SN 1987A

The Far Ultraviolet Spectroscopic Explorer (FUSE) was used to search for broad O VI emission from the shock interaction zones produced by the collision of high-velocity supernova ejecta with the dense inner circumstellar ring of SN 1987A. Since the shock interaction with the inner ring began in 1997, broad (FWHM = 300 km/sec) emission from optical coronal lines (e.g. [Fe X], [Fe XI], and [Fe XIV]) has emerged and increased exponentially in strength. O VI 1032-1038 Angstrom emission is expected to track the coronal lines. O VI is also expected to be the primary cooling transition for the million-degree shocked gas. An accurate measurement of the O VI line strength would significantly improve current models of the shock interaction. FUSE observations of SN 1987A in 2000 and 2001 did not detect broad O VI due to spectral contamination fiom two earlytype stars within a few arc seconds of the SN. However, O VI emission was detected with narrow line widths (FWHM less than 35 km/sec) and a heliocentric radial velocity of +280 km/sec. This places the emitting gas at rest relative to the supernova and is interpreted as emission from unshocked circumstellar gas. A new FUSE observation of SN 1987A obtained in May 2007 used a narrow slit (1.25 x 20 arcsec) to significantly reduce the spectral contamination from the two early-type stars. Yet the 2007 spectrum does not reveal any significant O VI emission. The implications of these results are discussed.

Sonneborn, G.↗
NASA NTRS1999

Moreton Waves

"Moreton waves," named for the observer who popularized them, are a solar phenomenon also known in scientific literature as "Moreton-Ramsey wave," "flare waves," "flare-associated waves," "MHD blast waves," "chromospheric shock fronts" and various other combinations of terms which connote violently propagating impulsive disturbances. It is unclear whether all of the observations to which these terms have been applied pertain to a single physical phenomenon: there has perhaps been some overlap between the observations and the assumed physical properties of the observed occurrence. Moreton waves are ideally observed in the wings of H alpha, and appear as semi-circular fronts propagating at speeds ranging from several hundred to over a thousand km/sec. They form an arc, or "brow shape" which can span up to 180 degrees. Extrapolating the speed and locations of the arc indicates that the phenomenon's origin intersects well with the impulsive phase of the associated H alpha flare (if the flare exhibits an impulsive phase). However, the arc may not form or may not be observable until it is tens of megameters from the flaring region, and subsequently can propagate to distances exceeding 100 megameters. The high speeds and distances of propagation, plus the associated radio and energetic particle observations, provided strong evidence of a coronal, rather than a chromospheric origin. The H alpha manifestation of the wave is assumed to be the "ground track" or "skirt" of a three-dimensional disturbance.

Thompson, B. J.↗
NASA NTRS1977

The mass of Phobos

Radio tracking data associated with the February 1977 encounters between the Martian satellite Phobos and the Viking Orbiter I spacecraft have been analyzed to determine the gravitational constant of Phobos. A linear error analysis was conducted to determine the selection of data and the parameter solution set which would yield the best estimate of the gravitational constant. This error analysis indicated that the optimal data set was a data arc beginning just prior to the closest encounter and spanning three consecutive spacecraft orbits; data near periapsis were deleted. The most feasible parameter solution set consisted of the Phobos gravitational constant and the spacecraft initial conditions. The result of the data analysis was an estimate of (7.3 plus or minus 0.7) x 10 to the -4th cu km/sq sec for the gravitational constant of Phobos.

Tolson, R. H.↗
NASA NTRS1991

Users manual for the IMA program

The Impulsive Mission Analysis (IMA) computer program provides a user-friendly means of designing a complete Earth-orbital mission profile using an 80386-based microcomputer. The IMA program produces a trajectory summary, an output file for use by the new Simplex Computation of Optimum Orbital Trajectories (SCOOT) program, and several graphics, including ground tracks on a world map, altitude profiles, relative motion plots, and sunlight/communication timelines. The user can design missions using any combination of three basic types of mission segments: double co-eliptic rendezvous, payload delivery, and payload de-orbit/spacecraft recovery. Each mission segment is divided into one or more transfers, and each transfer is divided into one or more legs, each leg consisting of a coast arc followed by a burn arc.

Williams, D. F.↗
NASA NTRS2014

Partial Arc Curvilinear Direct Drive Servomotor

A partial arc servomotor assembly having a curvilinear U-channel with two parallel rare earth permanent magnet plates facing each other and a pivoted ironless three phase coil armature winding moves between the plates. An encoder read head is fixed to a mounting plate above the coil armature winding and a curvilinear encoder scale is curved to be co-axis with the curvilinear U-channel permanent magnet track formed by the permanent magnet plates. Driven by a set of miniaturized power electronics devices closely looped with a positioning feedback encoder, the angular position and velocity of the pivoted payload is programmable and precisely controlled.

Sun, Xiuhong↗
NASA NTRS1973

A determination of the earth tidal amplitude and phase from the orbital perturbations of the Beacon Explorer C spacecraft

An analysis of the orbital inclination of the Beacon Explorer C spacecraft over a period of nearly five months in 1970 revealed a very clear and distinctive perturbation caused by the earth and ocean tides. The perturbation has a full amplitude of about 1.8 seconds of arc and a period of about 85 days. This amplitude is approximately 15% smaller than would be expected from the solid-earth tide alone and is shifted slightly in phase. The perturbation can be represented almost exactly by a Love number of k sub 2 = 0.245 with a phase lag of 3.2 degrees. The data used were laser range measurements obtained by a NASA Goddard Space Flight Center tracking system in Greenbelt, Maryland.

Smith, D. E.↗
NASA NTRS1994

First assessment of GPS-based reduced dynamic orbit determination on TOPEX/Poseidon

The reduced dynamic Global Positioning System (GPS) tracking technique has been applied for the first time as part of the GPS experiment on TOPEX/Poseidon. This technique employs local geometric position corrections to reduce orbit errors caused by the mismodeling of satellite forces. Results for a 29-day interval in early 1993 are evaluated through postfit residuals and formal errors, comparison with GPS and laser/DORIS dynamic solutions, comparisons on 6-hr overlaps of adjacent 30-hr data arcs, altimetry closure and crossover analysis. Reduced dynamic orbits yield slightly better crossover agreement than other techniques and appear to be accurate in altitude to about 3 cm RMS.

Yunck, T. P.↗
NASA NTRS2006

NASA's Program to Monitor Orbital Debris in the GEO Belt and the General Problem of Measuring Near-Earth Object Orbits: Similarities and Differences

One of the goals for NASA s Orbital Debris Program Office has been to accurately characterize the population of debris in the geosynchronous Earth orbit (GEO) environment. Most objects larger than about 1 meter in size are regularly tracked and catalogued by the US Space Surveillance System in the GEO regime. The consequence has been that most large intact GEO objects are tracked, but the vast majority of GEO debris fragments are not. Only in recent years have observations been dedicated to characterize the GEO debris population. NASA s efforts have concentrated on using wide field-of-view telescopes to make complete surveys of the GEO regime to better our statistical understanding of the GEO debris population. These telescopes operate in a staring mode, and only make limited short-arc measurements of the orbits. This information, while limited, allows the possibility of debiasing the observations and constructing statistical distributions of orbits in inclination and ascending node. Recent work suggests that we may be able to use statistical methods to estimate better orbit parameters despite the limited data. Both of these types of studies estimating statistical orbit distributions, and estimating accurate orbits using limited short-arc data have direct analogues in ongoing studies of near-Earth objects (NEO) such as asteroids and comets. This talk will describe the GEO study methods in use and being developed at NASA, and will discuss how such methods may or may not be applicable for NEO studies as well.

Matney, Mark↗
NASA NTRS1971

Preliminary Goddard geopotential using optical tracking data and a comparison with SAO models

A preliminary Goddard Space Flight Center (GSFC) geopotential and center of mass station coordinate solution was obtained from satellite orbital data using numerical integration theory. This geodetic solution is a prelude to a more general solution which will combine the 1971 International Satellite Geodesy Experiment (ISAGEX) laser data with the present data being employed. The present GSFC geopotential solution consists of the spherical harmonic coefficients through degree and order eight with higher order satellite resonant coefficients. The solution represents a first iteration result from 17 satellites with approximately 150 weekly orbital arcs containing some 40,000 optical observations. The GSFC preliminary result is compared with final results from the Smithsonian Astrophysical Observatory (SAO) solutions including the 1969 SAO Standard Earth II solution. One aspect of interest for the comparison is that SAO uses an analytic theory for the orbital solution whereas GSFC uses a numerical integration theory. The comparison of geopotential results shows that good agreement exists in general but that there are some areas of minor differences.

Lerch, F. J.↗
NASA NTRS1974

Basic research and data analysis for the national geodetic satellite program and for the earth and ocean physics applications program

Activities related to the National Geodetic Satellite Program are reported and include a discussion of Ohio State University's OSU275 set of tracking station coordinates and transformation parameters, determination of network distortions, and plans for data acquisition and processing. The problems encountered in the development of the LAGEOS satellite are reported in an account of activities related to the Earth and Ocean Physics Applications Program. The LAGEOS problem involves transmission and reception of the laser pulse designed to make accurate determinations of the earth's crustal and rotational motions. Pulse motion, ephemeris, arc range measurements, and accuracy estimates are discussed in view of the problem. Personnel involved in the two programs are also listed, along with travel activities and reports published to date.

Source record↗
NASA NTRS1990

Spacecraft preliminary orbit determination using tracking measurements obtained from the Tracking and Data Relay Satellite System (TDRSS) and the Ground Spaceflight Tracking and Data Network (GSTDN)

In order to validate the operational and computational capabilities of the Preliminary Orbit Determination System (PODS), tests were performed using tracking measurements for several systems including the ERB satellite, the SMM, the STS and Landsat-4. POD procedures are utilized to generate a state vector following an unplanned orbital perturbation or spacecraft maneuver, when an estimation process such as a differential correction orbit determination cannot obtain a solution. Results are presented to demonstrate POD for several situations involving different qualities of a priori target state vectors, data type combinations, data arc lengths, and mixtures of single-TDRS, dual-TDRS, and GSTDN measurements. The system's ability to determine accurately the state vector for the spacecraft and the effectiveness of the solution screening process are discussed. It is shown that PODS is capable of determining a spacecraft vector when differential correction orbit determination processes fail.

Kirschner, S. M.↗