Search NASA⌕ Search

SEARCH · Search NASA

Results for “attitude”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Attitude control system

An attitude control system is described in which angular rate signals are generated by rate gyros mounted closely adjacent to gimbaled engines at the rear of a vehicle. Error signals representative of a commanded change in vehicle angle or attitude are obtained from a precision inertial platform located in the nose region of the vehicle. The rate gyro derived signals dominate at high frequencies where dynamic effects become significant, and platform signals dominate at low frequencies where precision signals are required for a steady vehicle attitude. The blended signals are applied in a conventional manner to control the gimbaling of vehicle engines about control axes.

Vonpragenau, G. L.↗
NASA NTRS1976

Panoramic attitude sensor

Each subassembly, design analysis, and final calibration data on all assemblies for the Panormic Attitude Sensor (PAS) are described. The PAS is used for course attitude determination on the International Ultraviolet Explorer Spacecraft (IUE). The PAS contains a sun sensor which is sensitive only to the sun's radiation and a mechanically scanned sensor which is sensitive to the earth, moon, and the sun. The signals from these two sensors are encoded and sent back in the telemetry data stream to determine the spacecraft attitude.

Meek, I. C.↗
NASA NTRS1976

Attitude control of Mariner Jupiter-Saturn spacecraft

A major challenge of the Mariner Jupiter-Saturn '77 spacecraft was devising a suboptimal attitude controller that could meet the demanding mission requirements. The challenge was met by implementing a discrete stochastic controller for a specially designed onboard computer. The paper describes the design and operation of the controller, based on a simple model of spacecraft dynamics. Two types of cruising modes are considered: inertial cruise, where spacecraft attitude is determined from gyro position outputs, and celestial cruise, where position information is obtained from sun sensors and a star tracker. These two cruise modes under conditions of disturbances were simulated on computer, and the results showed that the controller maintained the spacecraft attitude with low rates. An appendix gives details on the single-step predictor.

Bahrami, K. A.↗
NASA NTRS1976

Three-axis attitude control for a geostationary satellite

The Applications Technology Satellite-6 was successfully launched into a geostationary orbit in May, 1974. Since that time, its attitude control subsystem has routinely demonstrated its ability to perform precision pointing and precision closed loop maneuvers. This paper describes the ATS-6 attitude control subsystem. The requirements imposed by the spacecraft mission objectives are outlined, and functional descriptions of the principal attitude control subsystem components and control laws are presented. The paper concludes with a summary comparison of in-orbit performance relative to its specified performance requirements.

Freeman, H. R.↗
NASA NTRS1977

Aircraft attitude measurement using a vector magnetometer

The feasibility of a vector magnetometer system was investigated by developing a technique to determine attitude given magnetic field components. Sample calculations are then made using the earth's magnetic field data acquired during actual flight conditions. Results of these calculations are compared graphically with measured attitude data acquired simultaneously with the magnetic data. The role and possible implementation of various reference angles are discussed along with other pertinent considerations. Finally, it is concluded that the earth's magnetic field as measured by modern vector magnetometers can play a significant role in attitude control systems.

Peitila, R.↗
NASA NTRS1978

On the attitude motion of an orbiting rigid body under the influence of gravity gradient torque

An investigation is made of the rotational motion of a rigid body orbiting the earth, under the influence of the geogravity-gradient torque. The attitude dynamics are formulated as perturbations from a nominal case. The perturbed equations are solved asymptotically, by the multiple scales technique. The independent variable, time, is extended into a space of higher dimension by means of new scales, fast, slow, etc. Integration of the equations is carried out separately in the new variables. The rapid and slow aspects of the attitude dynamics are systematically separated, resulting in a more efficient computer implementation and enhanced physical insight. The theory is applied to predict the attitude dynamics of an asymmetric rigid body satellite. A comparison is made of the maximum errors as the step size increases as predicted by the multiple scales solution and direct numerical integration. An improvement in computational speed of an order of magnitude is demonstrated.

Tao, Y. C.↗
NASA NTRS1978

Recursive estimator for OSO-8 attitude

Modifications and enhancements that have been made to the Recursive Estimation Attitude Program (REAP) are discussed. Continuous attitudes for OSO-8 to + or - 0.05 degree accuracy are determined from Sun and star slit sensors mounted on the spinning portion of the spacecraft. The bulk of the attitude production is performed by a Weighted Least Squares (WLS) batch processor, but REAP is used for problem passes such as those involving gas jet maneuvers, sparse star fields, or star sensor saturation by high energy particles in the South Atlantic Anomaly.

Headrick, R. D.↗
NASA NTRS1978

ISEE-C attitude determination using fine sun sensor data only

Techniques developed to determine the spin axis attitude using Fine Sun Sensor (FSS) data only are described. At any given time, the Sun angle specifies the orientation of the spin axis relative to the sunline. The instantaneous time rate of change of the sun angle is directly proportional to the orientation of the spin axis relative to a reference plane that is normal to the ecliptic. Thus, the spin axis attitude can be determined when sufficient data has been collected to accurately measure the rate of change of the sun angle. The uncertainties can be computed directly from the uncertainties in the coefficients of the smoothed sun angle curve. The FSS-only technique is unique in that ephemeris vectors are required only to transform the attitude results to more conventional coordinate frames. The combination of the mission geometry and the FSS accuracy make ISEE-C an ideal mission for applying this method. However, the technique can be used on other missions, such as spin stabilized geosynchronous missions.

Gunshol, L. P.↗
NASA NTRS1979

The NASA Multimission Spacecraft Modular Attitude Control System

This paper describes the design of the Modular Attitude Control Subsystem (MACS) that is incorporated in the NASA Multimission Modular Spacecraft (MMS). The MACS is required to provide precision attitude control for a wide class of spacecraft missions including earth pointing, stellar pointing and solar pointing. The MACS is composed of sensors, actuators and associated electronics. Normally the MACS computational, logic and sequencing functions are performed by an Onboard Computer (OBC) located in the MMS; however, the MACS implements an independent backup safe hold attitude controller to protect against the consequences of an OBC failure. The contents of the paper include a description of the MACS configuration and functional operation. The MACS operational modes and performance requirements are described followed by a discussion of the MACS component characteristics. The paper concludes with a description of the safe hold controller design and typical MACS OBC algorithms.

Murrell, J. W.↗
NASA NTRS1980

Attitude determination of Galileo spacecraft from star data

An entirely autonomous attitude determination algorithm has been developed for the dual spin Galileo spacecraft in its mission to Jupiter. A batch mode process is established which identifies three stars within the scanner's field-of-view based on the criteria of intensity and geometry. This is followed by a continuous star acquisition procedure which provides star transit times and a spacecraft spin rate estimate. A least-squares estimator then sequentially determines the spacecraft's attitude from successive star crossings by minimizing an error derived using the necessary condition of star and scanner slit normal orthogonality. Simulation results are presented, showing successful star identification and attitude convergence in the presence of nutation and star transit time uncertainty.

Wong, E. C.↗
NASA NTRS1980

Nonlinear attitude dynamics of satellites

A study of predicting the rotational motion of a rigid body satellite orbiting the earth under the influence of external torques is presented. The attitude motion in response to external torques is formulated as a perturbation from a nominal torque-free case; the equations of motion are parameterized by the ratio of the orbital and attitude frequencies. The independent variable time is extended into a space of higher dimension by using new fast and slow scales. The theory is applied for predicting the attitude dynamics of an asymmetric rigid-body satellite.

Ramnath, R. V.↗
NASA NTRS1981

Low drag attitude control for Skylab orbital lifetime extension

In the fall of 1977 it was determined that Skylab had started to tumble and that the original orbit lifetime predictions were much too optimistic. A decision had to be made whether to accept an early uncontrolled reentry with its inherent risks or try to attempt to control Skylab to a lower drag attitude in the hope that there was enough time to develop a Teleoperator Retrieval System, bring it up on the Space Shuttle and then decide whether to boost Skylab to a higher longer life orbit or to reenter it in a controlled fashion. The end-on-velocity (EOVV) control method is documented, which was successfully applied for about half a year to keep Skylab in a low drag attitude with the aid of the control moment gyros and a minimal expenditure of attitude control gas.

Glaese, J. R.↗
NASA NTRS1980

Attitude and articulation control solutions for Project Galileo

Design problems and the solutions adopted for them in the attitude and articulation control subsystem for the Galileo spacecraft are discussed as an illustration of the application of dual-spin control to an interplanetary spacecraft. Following a review of the baseline design of the Galileo system and mission, consideration is given to problems encountered in the areas of autonomous attitude determination, attitude control, spacecraft dynamics and software margins. Design issues raised by subsequent changes in spacecraft configuration are also indicated. It is pointed out that although difficulties associated with control system complexity in a dual-spin interplanetary spacecraft have been satisfactorily resolved for the Galileo mission, the future application of dual spin in interplanetary flight is in doubt.

Rasmussen, R. D.↗
NASA NTRS1981

Flight performance of SEASAT-1 attitude control system

The paper describes the attitude control flight performance of SEASAT-A, (launched in June 1978), until failure of the power subsystem terminated the mission in Oct. 1978. Information provided by the satellite pertained to surface winds and coastal storm activity, currents and wave heights, ocean topography and temperature. The ACS used three-axis momentum exchange and magnetic momentum containment and was set in a nose-down configuration. Attitude control sensing was via horizon sensors and attitude anomalies, resulting from solar interference with the sensors, is covered in detail. Remedial action was taken by reconfiguring the IR scanners, but failure resulted nevertheless. Recommendations for similar future missions include consideration of the effect of light sources and circuit time constants and scan rates. A block diagram of the ACS is included.

Beach, S. W.↗
NASA NTRS1981

Inertial attitude determination for a dual-spin planetary spacecraft

Design and performance evaluations of an onboard inertial attitude determination system for a dual-spin planetary spacecraft are presented. A quaternion integration algorithm and a rate estimator sequentially determine the scan platform's inertial attitude and rate from the drift and misalignment compensated gyro outputs. A least-squares estimator algorithm processes the star transit data from a rotor-mounted star scanner, and provides periodic updates of the scan platform's attitude as a means of correcting the drift of the quaternion integration algorithm. Computer simulated algorithm performance in the presence of nutation and sensor noise are presented.

Wong, E. C.↗
NASA NTRS1981

A mathematical model of LANDSAT-D attitude dynamics with internal motion

An algorithm to model the effects of internal motion by the solar array and the high gain antenna on the attitude of the LANDSAT-D spacecraft is presented. The relative torque and angular momenta arising from the internal motions are assumed to be attitude independent but are considered to be a source of attitude perturbations. The equation of motion for the three body problem is derived and then compared with the one body case. The effect of the internal motion on the control of the spacecraft is shown in a computer study of the problem.

Oh, S. D.↗
NASA NTRS1981

ATS-6 engineering performance report. Volume 2: Orbit and attitude controls

Attitude control is reviewed, encompassing the attitude control subsystem, spacecraft attitude precision pointing and slewing adaptive control experiment, and RF interferometer experiment. The spacecraft propulsion system (SPS) is discussed, including subsystem, SPS design description and validation, orbital operations and performance, in-orbit anomalies and contingency operations, and the cesium bombardment ion engine experiment. Thruster failure due to plugging of the propellant feed passages, a major cause for mission termination, are considered among the critical generic failures on the satellite.

Wales, R. O.↗
NASA NTRS1982

Modular design attitude control system

A hybrid multilevel linear quadratic regulator (ML-LQR) approach was developed and applied to the attitude control of models of the rotational dynamics of a prototype flexible spacecraft and of a typical space platform. Three axis rigid body flexible suspension models were developed for both the spacecraft and the space platform utilizing augmented body methods. Models of the spacecraft with hybrid ML-LQR attitude control and with LQR attitude control were simulated and their response with the two different types of control were compared.

Chichester, F. D.↗