Search NASA⌕ Search

SEARCH · Search NASA

Results for “barrier method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Quantum dynamics of hydrogen atoms on graphene. II. Sticking

Following our recent system-bath modeling of the interaction between a hydrogen atom and a graphene surface [Bonfanti et al., J. Chem. Phys. 143, 124703 (2015)], we present the results of converged quantum scattering calculations on the activated sticking dynamics. The focus of this study is the collinear scattering on a surface at zero temperature, which is treated with high-dimensional wavepacket propagations with the multi-configuration time-dependent Hartree method. At low collision energies, barrier-crossing dominates the sticking and any projectile that overcomes the barrier gets trapped in the chemisorption well. However, at high collision energies, energy transfer to the surface is a limiting factor, and fast H atoms hardly dissipate their excess energy and stick on the surface. As a consequence, the sticking coefficient is maximum (∼0.65) at an energy which is about one and half larger than the barrier height. Comparison of the results with classical and quasi-classical calculations shows that quantum fluctuations of the lattice play a primary role in the dynamics. A simple impulsive model describing the collision of a classical projectile with a quantum surface is developed which reproduces the quantum results remarkably well for all but the lowest energies, thereby capturing the essential physics of the activated sticking dynamics investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure and electrical properties of LaNiO{sub 3} thin films by RF sputtering for the growth of (Pb,La)(Zr,Ti)O{sub 3} films on silicon and nickel substrates

Conductive LaNiO{sub 3} (LNO) thin films were deposited on Si substrates by RF sputtering at room temperature to 600 Degree-Sign C. X-ray diffraction of the LNO films showed that preferred orientation varied from (100) below 500 Degree-Sign C to (110) at 600 Degree-Sign C at deposition temperature of 200-600 Degree-Sign C. The room temperature resistivity was 2250-3400 {mu}{Omega}-cm at the range of 200 Degree-Sign C {approx}500 Degree-Sign C. The LNO films, deposited at room temperature, were postannealed in air from 500 to 800 Degree-Sign C, and the resistivity value was 280 {mu}{Omega}-cm at a postannealing temperature of 600 Degree-Sign C. Subsequently, sol-gel derived (Pb,La)(Zr,Ti)O{sub 3} thin films were deposited on LNO-buffered nickel substrates and characterized, the results were compared to those of the same films on silicon substrates. The comparison demonstrated that the performance characteristics of the LNO-buffered nickel foils are similar to those of LNO-buffered silicon substrates. Thus, LNO films prepared by the sputtering method can act as an effective barrier layer on nickel substrates for embedded microelectronic devices.

36 MATERIALS SCIENCE↗

Influence of La/W ratio on electrical conductivity of lanthanum tungstate with high La/W ratio

The proton-conducting properties of lanthanum tungstates (LWOs) with high La/W ratios were investigated using electrochemical measurements and quantum chemical calculations. Single phases of LWOs with high La/W ratios (6.3≤La/W≤6.7) were synthesized by high-temperature sintering at around 1700 °C. The electrical conductivity of LWO increased with increasing La/W ratio in the single-phase region. The LWO synthesized at the optimum sintering temperature and time, and with the optimum La/W ratio gave the maximum conductivity, i.e., 2.7×10{sup −3} S cm{sup −1} with La/W=6.7 at 500 °C. Density functional theory calculations, using the nudged elastic band method, were performed to investigate the proton diffusion barrier. The results suggest that the proton diffusion paths around La sites have the lowest proton diffusion barrier. These findings improve our understanding of LWO synthesis and the proton-conducting mechanism and provide a strategy for improving proton conduction in LWOs. - Graphical abstract: The LWOs with high La/W ratios were synthesized for the first time. The optimum La/W ratio gave the maximum conductivity with La/W=6.7 at 500 °C. The proton diffusion paths were also considered with density functional theory calculations. - Highlights: • The proton-conducting properties of lanthanum tungstates (LWOs) were investigated. • Single phase LWOs with high La/W ratios (6.3≤La/W≤6.7) were synthesized successfully. • LWOs with the high La/W ratios showed high proton conductivity. • The DFT calculation suggested the lowest proton diffusion barrier in the path around La sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A chain-of-states acceleration method for the efficient location of minimum energy paths

We describe a robust and efficient chain-of-states method for computing Minimum Energy Paths (MEPs) associated to barrier-crossing events in poly-atomic systems, which we call the acceleration method. The path is parametrized in terms of a continuous variable t ∈ [0, 1] that plays the role of time. In contrast to previous chain-of-states algorithms such as the nudged elastic band or string methods, where the positions of the states in the chain are taken as variational parameters in the search for the MEP, our strategy is to formulate the problem in terms of the second derivatives of the coordinates with respect to t, i.e., the state accelerations. We show this to result in a very simple and efficient method for determining the MEP. We describe the application of the method to a series of test cases, including two low-dimensional problems and the Stone-Wales transformation in C{sub 60}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Schottky Diodes on Heterostructures with Two-Dimensional Electron Gas

The results of studies of the characteristics of contacts with Schottky barriers on a pseudomorphic AlGaAs/InGaAs heterostructure are presented. The Ti-based Schottky diodes were created by a standard pHEMT technology. It is shown that the parameters of the fabricated contacts with Schottky barriers are close to the characteristics of ideal contacts based on aluminum or molybdenum created in the process of molecular beam epitaxy. It is also shown that as compared to the diodes based on AlGaAs homostructures, the measured Schottky barrier height is smaller and the ideality factor is higher in diodes created on pseudomorphic heterostructures. Along with the well-known methods for determining the Schottky-barrier height, we tested a technique based on the measurement of the threshold voltage in diodes with a two-dimensional electron gas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An efficient algorithm for the projection of a point on the intersection of two hyperplanes and a box in $\mathbb {R}^n$

Here, we present an efficient strongly polynomial algorithm for the projection of a point on the intersection of two hyperplanes and a box in \(\mathbb {R}^n\) . Interior point methods are the most efficient algorithm in the literature to solve this problem. While efficient in practice, the complexity of interior-point methods is bounded by a polynomial in the dimension of the problem and in the accuracy of the solution. Moreover, their efficiency is highly dependent on a series of parameters depending on the specific method chosen (especially for nonlinear problems), such as step size, barrier parameter, accuracy, among others. We propose a new method based on the KKT optimality conditions. In this method, we write the problem as a function of the Lagrangian multipliers of the hyperplanes and seek to find the pair of multipliers that corresponds to the optimal solution. We prove that the algorithm has complexity \(O(n^2 \log n)\) .

42 ENGINEERING↗

Assessing blood brain barrier dynamics or identifying or measuring selected substances, including ethanol or toxins, in a subject by analyzing Raman spectrum signals

A non-invasive method for analyzing the blood-brain barrier includes obtaining a Raman spectrum of a selected portion of the eye and monitoring the Raman spectrum to ascertain a change to the dynamics of the blood brain barrier.Also, non-invasive methods for determining the brain or blood level of an analyte of interest, such as glucose, drugs, alcohol, poisons, and the like, comprises: generating an excitation laser beam at a selected wavelength (e.g., at a wavelength of about 400 to 900 nanometers); focusing the excitation laser beam into the anterior chamber of an eye of the subject so that aqueous humor, vitreous humor, or one or more conjunctiva vessels in the eye is illuminated; detecting (preferably confocally detecting) a Raman spectrum from the illuminated portion of the eye; and then determining the blood level or brain level (intracranial or cerebral spinal fluid level) of an analyte of interest for the subject from the Raman spectrum. In certain embodiments, the detecting step may be followed by the step of subtracting a confounding fluorescence spectrum from the Raman spectrum to produce a difference spectrum; and determining the blood level and/or brain level of the analyte of interest for the subject from that difference spectrum, preferably using linear or nonlinear multivariate analysis such as partial least squares analysis. Apparatus for carrying out the foregoing methods are also disclosed.

Lambert, James L.↗

Thermal fracture mechanisms in ceramic thermal barrier coatings

Ceramic thermal barrier coatings represent an attractive method of increasing the high temperature limits for systems such as diesel engines, gas turbines and aircraft engines. However, the dissimilarities between ceramics and metal, as well as the severe temperature gradients applied in such systems, cause thermal stresses which can lead to cracking and ultimately spalling of the coating. This paper reviews the research which considers initiation of surface cracks, interfacial edge cracks and the effect of a transient thermal load on interface cracks. The results of controlled experiments together with analytical models are presented. The implications of these findings to the differences between diesel engines and gas turbines are discussed. The importance of such work for determining the proper design criteria for thermal barrier coatings is underlined.

Kokini, K.↗

Thermal fracture mechanisms in ceramic thermal barrier coatings

Ceramic thermal barrier coatings represent an attractive method of increasing the high temperature limits for systems such as diesel engines, gas turbines and aircraft engines. However, the dissimilarities between ceramics and metal, as well as the severe temperature gradients applied in such systems cause thermal stresses which can lead to cracking and ultimately spalling of the coating. This paper reviews the research which considers initiation of surface cracks, interfacial edge cracks and the effect of a transient thermal load on interface cracks. The results of controlled experiments together with analytical models are presented. The implications of these findings to the differences between diesel engines and gas turbines are discussed. The importance of such work for determining the proper design criteria for thermal barrier coatings is underlined.

Kokini, Klod↗

Apparatus and method of manufacture for an imager equipped with a cross-talk barrier

An imager apparatus and associated starting material are provided. In one embodiment, an imager is provided including a silicon layer of a first conductivity type acting as a junction anode. Such silicon layer is adapted to convert light to photoelectrons. Also included is a semiconductor well of a second conductivity type formed in the silicon layer for acting as a junction cathode. Still yet, a barrier is formed adjacent to the semiconductor well. In another embodiment, a starting material is provided including a first silicon layer and an oxide layer disposed adjacent to the first silicon layer. Also included is a second silicon layer disposed adjacent to the oxide layer opposite the first silicon layer. Such second silicon layer is further equipped with an associated passivation layer and/or barrier.

Pain, Bedabrata↗

All-Polyester Multilayer Plastics (‘All-Polyester MLPs’): A Redesign for Inherently Recyclable Plastics

Multilayer plastics (MLPs) are widely used in modern packaging because they combine multiple functions such as oxygen and moisture barriers, mechanical strength, puncture resistance, and heat sealability into lightweight and cost-effective packaging solutions. These attributes are essential for food, beverage, pharmaceutical, and consumer goods packaging. However, conventional commercial MLPs typically consist of five to twelve layers made from chemically incompatible materials, including polyolefins, polyethylene terephthalate, nylon, ethylene-vinyl alcohol (EVOH), adhesives, and tie layers. This complexity makes MLPs extremely difficult to recycle. As a result, the vast majority of multilayer plastics (MLPs) are disposed of through landfilling or incineration. This disposal pathway perpetuates demand for virgin material production, thereby driving high industrial energy consumption, increasing greenhouse gas (GHG) emissions, and contributing to the long-term accumulation of plastic waste. The scope of work included: (1) Design and fabrication of all-polyester multilayer structures using commercially relevant processing methods; (2) Experimental validation of barrier, mechanical, and sealing performance; (3) Demonstration of both mechanical and chemical recycling pathways; and (4) Comprehensive techno-economic analysis (TEA) and life-cycle assessment (LCA) to quantify cost, energy, and environmental impacts.

36 MATERIALS SCIENCE↗

Nanoscale Interfacial Engineering for Flexible Barrier Films

Alternating layers of organic and oxide thin films used as diffusion barriers in emerging flexible device technologies are vulnerable to degradation under the influence of mechanical stresses, temperature cycling, photodegradation, and chemically active environmental species. Delamination of the internal organic to oxide interfaces often limits the operational lifetime of the barrier system. We demonstrate a method for increasing the adhesion of organic and oxide thin films by generating nanostructures at the interface. We show that the adhesion of an acrylate to silicon oxide model system can be increased by up to an order of magnitude (from ~2 J/ m 2 to 24 J/m 2 ). Here, by altering the diameter and depth of the patterns in the model systems, the adhesion energy can be changed, and the delamination pathway can be controlled. In addition, we show that a patterned interface maintains a higher adhesion than its planar counterpart for all durations of UV–A and UV–B exposure

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Breakup effects in fusion reactions of stable weakly bound nuclei and light targets

We use a new method to search systematic trends in total fusion reactions of weakly bound nuclei at near-barrier energies. In a recent work, this method was employed to investigate these reactions in the case of heavy targets. Here, we extend this study to the light targets. Comparing fusion data with a dimensionless fusion excitation function, used as a benchmark, one can identify enhancement or suppression effects in fusion data. Through a proper renormalization of the data, it is possible to disentangle static and dynamic effects arising from the low dissociation energy of the projectile. Applying this method to the available data in the literature, we conclude that there is no appreciable suppression of enhancement in the total fusion data of light weakly bound systems. We point out that some unexpected deviations from this benchmark may possibly indicate problems with the data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Impacts from Deployment Barriers on the United States Wind Power Industry: Overview & Preliminary Findings (Presentation)

Regardless of cost and performance some wind projects are unable to proceed to commissioning as a result of deployment barriers. Principal deployment barriers in the industry today include: wildlife, public acceptance, access to transmission, and radar. To date, methods for understanding these non-technical barriers have failed to accurately characterize the costs imposed by deployment barriersand the degree of impact to the industry. Analytical challenges include limited data and modeling capabilities. Changes in policy and regulation, among other factors, also add complexity to analysis of impacts from deployment barriers. This presentation details preliminary results from new NREL analysis focused on quantifying the impact of deployment barriers on the wind resource of the UnitedStates, the installed cost of wind projects, and the total electric power system cost of a 20% wind energy future. In terms of impacts to wind project costs and developable land, preliminary findings suggest that deployment barriers are secondary to market drivers such as demand. Nevertheless, impacts to wind project costs are on the order of $100/kW and a substantial share of the potentiallydevelopable windy land in the United States is indeed affected by deployment barriers.

17 WIND ENERGY↗

Developing Standards for AI/ML Systems in Civil Aviation: Challenges and Barriers

The inability to establish appropriate assurance methods for AI/ML components in safety critical systems leaves us unable to effectively manage the risks and benefits of such systems. It drives cost of development for systems with AI/ML components uneconomically high, it delays the adoption of systems with AI/ML components at scale, and it can result in catastrophic consequences in terms of the safety of systems with AI/ML components. In this presentation we will explore what constitutes sufficient scientific-based evidence to substantiate a safety claim related to an AI/ML component performing a safety-critical function.

AI/ML Standards↗

Real-time patch-clamp sensing of transport across a barrier tissue

The present disclosure relates to methods, apparatuses, and systems to measure one or more electrical signals from a cultured cell layer. In some embodiments, such electrical signals can be indicative of transport or lack of transport of an agent through the cell layer.

Source record↗

Low temperature barrier wellbores formed using water flushing

A method of forming an opening for a low temperature well is described. The method includes drilling an opening in a formation. Water is introduced into the opening to displace drilling fluid or indigenous gas in the formation adjacent to a portion of the opening. Water is produced from the opening. A low temperature fluid is applied to the opening.

42 ENGINEERING↗

Cross-border cooperation in inner Scandinavia: A territorial impact assessment

The use of territorial impact assessment procedures is gaining increasing relevance in the European Union policy evaluation processes. However, no concrete territorial impact assessment tools have been applied to evaluating EU cross-border programmes. In this light, this article provides a pioneering analysis on how to make use of territorial impact assessment procedures on cross-border programmes. More specifically, it assesses the main territorial impacts of the Inner Scandinavian INTERREG-A sub-programme, in the last 20 years (1996–2016). It focuses on its impacts on reducing the barrier effect, in all its main dimensions, posed by the presence of the administrative border. The results indicate a quite positive impact of the analysed cross-border cooperation programme, in reducing the barrier effect in all its main dimensions. The obtained potential impact values for each analysed dimension indicate, however, that the ‘economy-technology’ dimension was particularly favoured, following its strategic intervention focus in stimulating the economic activity and the attractiveness of the border area. - Highlights: • A territorial impact assessment method to assess cross-border cooperation is proposed. • This method rationale is based on the main dimensions of the barrier effect. • This method identified positive impacts in all analysed dimensions. • The economy-technological dimension was the most positively impacted one.

54 ENVIRONMENTAL SCIENCES↗