Search NASA⌕ Search

SEARCH · Search NASA

Results for “built structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

High-K four-quasiparticle states in {sup 138}Gd

States above the known K{sup {pi}}=8{sup -} 6 {mu}s isomer in {sup 138}Gd have been populated with the {sup 106}Cd({sup 36}Ar,2p2n) reaction at a beam energy of 180 MeV at the University of Jyvaeskylae, Finland. The recoil-isomer tagging technique was utilized to correlate delayed {gamma}-ray decays, detected in the GREAT focal plane spectrometer, with prompt decays measured in the JUROGAM II spectrometer at the target position. The lifetime of the K{sup {pi}}=8{sup -} isomeric state has been remeasured as 6.2(2) {mu}s. Two high-lying strongly coupled bands have been established with K{sup {pi}}{>=}12{sup -}. Potential-energy surface calculations, in conjunction with g factor measurements, reveal that they are built upon four-quasiparticle structures comprising two-quasineutron plus two-quasiproton configurations. The short half-life or lack of hindrance for the decays from these four-quasiparticle band-head states is reasoned to be a consequence of increased triaxial deformation and mixing due to the high density of states relative to the lower two-quasiparticle 6-{mu}s isomeric state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Design and Fabrication of the Superconducting Horizontal Bend Magnet for the Super High Momentum Spectrometer at Jefferson Lab

A collaboration exists between NSCL and JLab to design and build JLab's Super High Momentum Spectrometer (SHMS) horizontal bend magnet that allows the bending of the 12 GeV/c particles horizontally by 3° to allow SHMS to reach angles as low as 5.5°. Two full size coils have been wound and are cold tested for both magnetic and structural properties. Each coil is built from 90 layers of single-turn SSC outer conductor cable. An initial test coil with one third the turns was fabricated to demonstrate that the unique saddle shape with fully contoured ends could be wound with Rutherford superconducting cable. Learned lessons during the trial winding were integrated into the two complete full-scale coils that are now installed in the helium vessel. The fabrication of the iron yoke, cold mass, and thermal shield is complete, and assembly of the vacuum vessel is in progress. This paper presents the process and progress along with the modified magnet design to reduce the fringe field in the primary beam region and also includes the impact of the changes on coil forces and coil restraint system.

43 PARTICLE ACCELERATORS↗

Adhesion in thermomechanically processed seaweed-lignocellulosic composite materials

The increasing concerns associated with petroleum-derived polymers motivate the development of sustainable, renewably sourced alternatives. In ubiquitous applications such as structural materials for infrastructure, the built environment as well as packaging, where natural materials such as wood are used, we rely on nonrenewable and nondegradable polymers to serve as adhesives. In wood panels, such as medium density fiberboards (MDFs), formaldehyde-based resins are predominantly used to bond wood fibers and to provide strength to the materials. To further mitigate the environmental impact of construction materials, more sustainable adhesives need to be investigated. Here, in this article, we introduce Ulva seaweed as an adhesive to enable cohesion and strength in hot-pressed wood panels. Upon hot-pressing, powdered Ulva flows in between the wood particles, generating a matrix, which provides strong binding. We show that the flexural strength of Ulva-bonded wood biocomposites increases with increasing Ulva concentrations. At an Ulva concentration of 40 wt%, our composites reach an average elastic modulus of 6.1 GPa, and flexural strength of 38.2 MPa (compared to 4.7 GPa and 22.6 MPa, respectively, for pure wood compressed at the same pressing conditions). To highlight the bonding mechanisms, we performed infrared and x-ray photoelectron spectroscopy and identified indications of fatty acid mobility during hot-pressing. In addition, we demonstrate that the presence of Ulva improves other properties of the composites such as water resistance and fame retardancy. Ulva is also shown to behave as an excellent adhesive agent between two prepressed beams. Finally, we perform an in-depth analysis of the environmental impact of wood-Ulva biocomposites.

36 MATERIALS SCIENCE↗

Neurons to algorithms LDRD final report.

Over the last three years the Neurons to Algorithms (N2A) LDRD project teams has built infrastructure to discover computational structures in the brain. This consists of a modeling language, a tool that enables model development and simulation in that language, and initial connections with the Neuroinformatics community, a group working toward similar goals. The approach of N2A is to express large complex systems like the brain as populations of a discrete part types that have specific structural relationships with each other, along with internal and structural dynamics. Such an evolving mathematical system may be able to capture the essence of neural processing, and ultimately of thought itself. This final report is a cover for the actual products of the project: the N2A Language Specification, the N2A Application, and a journal paper summarizing our methods.

Rothganger, Fredrick H.↗

Complementary Probes of Dark Energy using Galaxy Clusters

Here, we have built a framework to constrain Dark Energy (DE) using the spatial distributions, number counts, and escape velocities of galaxy clusters in the context of next generation spectroscopic surveys. In the ΛCDM paradigm, galaxy clusters trace the expansion of the Universe in three different ways. (1.) Spatial distribution:The baryon acoustic oscillations (BAO) formed during recombination are imprinted into the spatial distribution of clusters. The locations of the BAO are standard-rulers which map the length-scale of the sound horizon. Statistical measures like the two-point correlation function and the power spectrum can be used to trace the scale of the BAO and thus the expansion history of the Universe.(2.) Number counts: Galaxy clusters are identified as peaks above a threshold in the underlying matter density field. Galaxies attract onto these peaks over time until gravity loses the battle against the accelerating expansion of space. The number and mass of galaxy clusters over time is sensitive to the strength of the DE and the amount of matter in the Universe.(3.) Escape velocity:The radius-velocity phase-space of galaxies within clusters has a sharp edge which traces the escape velocity of galaxies. This escape velocity is a combination of the local Newtonian gravitational potential and the acceleration of the expansion of the Universe. Weak lensing mass profiles of clusters can be used to predict the escape velocity profile from just the gravitational Newtonian component. In an expanding or contracting Universe, the observed phase-space escape velocity surface would be modified from this prediction.We built the large-scale structure covariances from mock catalogs which we can now use in the likelihood analyses to constrain Dark Energy models. We have developed the analytical framework to conduct the joint likelihood analysis of the bias function and the abundance function in order to constrain DE through their redshift evolution.We have investigated a new Dark Energy test that uses the weak lensing prediction of the grav-itational potential compared to the observed escape velocity profile from galaxy clusters. We have made predictions on the improvement in the Dark Energy figure-of-merit from this new test. We have also investigated the predicted enhancements of the cluster escape velocity profiles from modifi-cations to gravity. This effort can help rule out model classes of modified gravity as alternatives to Dark Energy.

79 ASTRONOMY AND ASTROPHYSICS↗

Recapitalizing Aging Infrastructure for a Net-Zero Future

The Chemistry and Metallurgy Research Facility (CMR) was built in 1952. The original structure consisted of five laboratory wings and office and administration wings. Wing 9 was added in 1959 to house unique equipment and capabilities for the national security mission of the United States. At the time, a centralized heat and power (CHP) plant was the best and most efficient option for serving large campuses, as was the use of fossil fuels, so CMR was put on LANL’s utility steam loop. Given the magnitude of heating energy requirements for the facility, it is a substantial greenhouse gas (GHG) contributor at Los Alamos National Laboratory (LANL) and has been for over 70 years.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Establishment of a Rating Program for Pre- and Post-Fabricated Windows

This document was prepared to support the Smart Buildings-Material Testing and Rating Centres (SB-2) activity of the Asia-Pacific Economic Cooperation (APEC) Energy Smart Communities Initiative (ESCI). The ESCI was put forward by APEC Leaders at the 2010 meeting in Japan. APEC is the premier forum for facilitating economic growth, cooperation, trade and investment in the Asia-Pacific region. This document addresses the testing and certification of building products and equipment to support building energy codes, focusing specifically on energy-efficient factory-built windows. It sets forth a proposed structure for an APEC economy to establish a testing, rating, certification, and labeling program for efficient factory-built windows. In the context of this document, efficient windows would be windows made with insulating glass (IG) and an efficient frame assembly. The minimum efficiency metric (or thermal performance) for these windows is not quantified in this document and would generally be established by a governmental agency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Improved Models for Metallic Nanoparticle Cores from Atomic Pair Distribution Function (PDF) Analysis

X-ray atomic pair distribution functions (PDFs) were collected from a range of canonical metallic nanomaterials, both elemental and alloyed, prepared using different synthesis methods and exhibiting drastically different morphological properties. Widely applied shape-tuned attenuated crystal (AC) fcc models proved inadequate, yielding structured, coherent, and correlated fit residuals. However, equally simple discrete cluster models could account for the largest amplitude features in these difference signals. A hypothesis testing based approach to nanoparticle structure modeling systematically ruled out effects from crystallite size, composition, shape, and surface faceting as primary factors contributing to the AC misfit. On the other hand, decahedrally twinned cluster cores were found to be the origin of the AC structure misfits for a majority of the nanomaterials reported here. It is further motivated that the PDF can readily differentiate between the arrangement of domains in these multiply twinned motifs. Most of the nanomaterials surveyed also fall within the sub-5 nm size regime where traditional electron microscopy cannot easily detect and quantify domain structures, with sampling representative of the average nanocrystal synthesized. Here, the results demonstrate that PDF analysis is a powerful method for understanding internal atomic interfaces in small noble metallic nanomaterials. Such core cluster models, easily built algorithmically, should serve as starting structures for more advanced models able to capture atomic positional disorder, ligand induced or otherwise, near nanocrystal surfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Foldy v1

We created a cloud-based application for running AlphaFold2 and related structural programs called Foldy. Foldy is built on Helm / Kubernetes, which enables a facile production deployment and a scalable backend. Once set up by an institution, Foldy requires no software expertise from its users. It can be used to predict the structure of large proteins (up to 3000 amino acids), to visualize Pfam and antiSMASH annotations, and to perform ligand docking with Autodock Vina.

Roberts, Jacob↗

Crystal structure of strontium Di[bis(iminodiacetato)cobaltate(III)] pentahydrate, Sr[cis(N)-Co(Ida){sub 2}]{sub 2} {center_dot} 5H{sub 2}O

Compound Sr[cis(N)-Co(Ida){sub 2}]{sub 2} {center_dot} 5H{sub 2}O (I) is synthesized and its crystal structure is determined. The crystals are built of [Co(Ida){sub 2}]{sup -} anionic complexes, [Sr(H{sub 2}O){sub 3}]{sup 2+} hydrated cations, and crystallization water molecules. Two independent anions are located on rotation axis 2 and have close structures. A distorted octahedral coordination of Co{sup 3+} atoms is formed by two N atoms and four O atoms of two Ida{sup 2-} ligands [Co-N, 1.932(3) and 1.940(3) Angstrom-Sign ; Co-O, 1.879-1.899(3) Angstrom-Sign ]. [Sr(H{sub 2}O){sub 3}]{sup 2+} cations randomly occupy half of the positions in the vicinity of centers of inversion. In addition to three water molecules, the environment of the Sr{sup 2+} atom includes five O atoms of five Ida{sup 2-} ligands [Sr-O, 2.487(3)-2.889(5) Angstrom-Sign ]. Because of the disordering of [Sr(H{sub 2}O){sub 3}]{sup 2+} cations, the structural function of the Ida{sup 2-} ligands varies from tridentate chelate to pentadentate bridging chelate. Sr-O and hydrogen bonds connect structural elements into a three-dimensional framework. The structure of I is compared with that of a related compound Sr[CoEdta]{sub 2}{center_dot}9H{sub 2}O (II). It is shown that the formation of N-H Horizontal-Ellipsis O hydrogen bonds, which connect [Co(Ida){sub 2}]{sup -} anionic complexes in I into compact chains, is an important factor leading to the difference between packings I and II.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characterization of electronic structures from CdS/Si nanoheterostructure array based on silicon nanoporous pillar array

Highlights: • CdS/Si nanoheterostructure array has been fabricated through a CBD method. • The electronic properties have been investigated by the I–V and C–V techniques. • The onset voltages, characteristic frequency and built-in potential are investigated. • The electronic structures can be tuned through the annealing treatments. - Abstract: The electronic properties of heterostructures are very important to its applications in the field of optoelectronic devices. Understanding and control of electronic properties are very necessary. CdS/Si nanoheterostructure array have been fabricated through growing CdS nanocrystals on the silicon nanoporous pillar array using a chemical bath deposition method. The electronic properties of CdS nanoheterostructure array have been investigated by the current–voltage, complex impedance spectroscopy and capacitance–voltage techniques. The onset voltages, characteristic frequency and built-in potential are gradually increased with increasing the annealing temperature. It is indicated that the electronic structures of CdS/Si nanoheterostructure array can be tuned through the annealing treatments.

36 MATERIALS SCIENCE↗

Design of a high power TM01 mode launcher optimized for manufacturing by milling

Recent research on high-gradient rf acceleration found that hard metals, such as hard copper and hard copper-silver, have lower breakdown rate than soft metals. Traditional high-gradient accelerating structures are manufactured with parts joined by high-temperature brazing. The high temperature used in brazing makes the metal soft; therefore, this process cannot be used to manufacture structures out of hard metal alloys. In order to build the structure with hard metals, the components must be designed for joining without high-temperature brazing. One method is to build the accelerating structures out of two halves, and join them by using a low-temperature technique, at the symmetry plane along the beam axis. The structure has input and output rf power couplers. We use a TM01 mode launcher as a rf power coupler, which was introduced during the Next Linear Collider (NLC) work. The part of the mode launcher will be built in each half of the structure. This paper presents a novel geometry of a mode launcher, optimized for manufacturing by milling. The coupler was designed for the CERN CLIC working frequency f = 11.9942 GHz; the same geometry can be scaled to any other frequency.

36 MATERIALS SCIENCE↗

Advanced Reaction System Program: Materials for ARS Reaction Chambers (FY18 Milestone, Subtask 3.3)

The objective of this effort is to identify materials and manufacturing technology that will allow the rapid construction and evaluation of computer modeled advanced reactor system designs to process specific carbon feedstock materials. Before full scale reaction systems can be built, prototypes need to be constructed and operated to validate the proposed new system performance against target criteria. The first steps, however, are to understand what type of materials are needed that can withstand the targeted process environments and determine how structures using those materials can be built. A wide range of reaction vessel conditions may exist in the processes being considered that could involve temperatures up to 1200°C, abrasive materials (high velocity coal and coal ash), different carbon feedstock materials (coal, biomass, and process wastes such as petcoke), corrosive and oxidizing/reducing gases, different material phases (solid, liquid, and gas), cyclic temperatures, microwave energy, customized vessel construction material needs (process stability, cost, weight, and compatibility with other materials), along with other known/unknown variables – all of which must be considered in selecting materials and considering manufacturing processes. The current focus of the research is to develop a reaction vessel sidewall structure consisting of a metal outer support and an inner ceramic (or cermet) protective surface. Ceramic coatings are desired because of their good corrosion and wear resistance, and because they are the material of choice to reduce metal shell temperature in high temperature processes. However significant property mismatches between metals and ceramics have been a roadblock to the joining of metals and ceramics.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

PDB-IHM: A System for Deposition, Curation, Validation, and Dissemination of Integrative Structures

Structures of many large biomolecular assemblies are now being determined using integrative approaches. In these approaches, information derived from multiple experimental and computational methods is combined to compute three-dimensional structures of multi-protein complexes and other macromolecular machines. A standalone prototype data resource for integrative structures called PDB-Dev was built, based on recommendations of the Integrative and Hybrid Methods (IHM) Task Force of the Worldwide Protein Data Bank (wwPDB). This effort included developing data standards and software tools for collecting, curating, validating, visualizing, archiving, and disseminating integrative structures that span diverse spatiotemporal scales and conformational states. Mechanisms have been created to validate integrative structures based on the experimental data underpinning them. Building upon this foundational framework, PDB-Dev has been further expanded to handle large dynamic macromolecular systems and integrative structures that combine, for example, experimental restraints with atomic coordinates computed by machine learning algorithms. Data standards and supporting tools have also been extended to capture information about biomolecular dynamics, such as conformational transitions and related kinetic data derived from biophysical methods. Recently, PDB-Dev was unified with the PDB archive and rebranded as PDB-IHM (pdb-ihm.org), further promoting FAIR (Findable, Accessible, Interoperable, and Reusable) principles of data stewardship for integrative structural biology.

IHMCIF↗

Structural Basis for ( S )-3,4-Dicarboxyphenylglycine (DCPG) As a Potent and Subtype Selective Agonist of the mGlu 8 Receptor

(S)-3,4-Dicarboxyphenylglycine (DCPG) was first reported in 2001 as a potent orthosteric agonist with high subtype selectivity for the mGlu8 receptor, but the structural basis for its high selectivity is not well understood. Herein, we have solved a cocrystal structure of recombinant human mGlu8 amino terminal domain (ATD) protein bound to (S)-DCPG, which possesses the largest lobe opening angle observed to date among known agonist-bound mGlu ATD crystal structures. The binding conformation of (S)-DCPG observed in the crystal structure is significantly different from that in the homology model built from an L-glutamate-bound rat mGlu1 ATD crystal structure, which has a smaller lobe opening angle. This highlights the importance of considering various lobe opening angles when modeling mGlu ATD–ligand complex. New homology models of other mGlu receptors based on the (S)-DCPG-bound mGlu8 ATD crystal structure were explored to rationalize (S)-DCPG’s high mGlu8 receptor subtype selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

La 1– x Bi 1+ x S 3 ( x ≈ 0.08): An n-Type Semiconductor

The new bismuth chalcogenide LaBiS3 crystallizes in the monoclinic space group C2/m with a = 27.997(5) Å, b = 4.0663(4) Å, c = 14.747(3) Å, and β = 118.55(3)°. The structure of LaBiS3 is built up of NaCl-type Bi2S5 blocks, and BiS4 and LaS5 infinitely long chains forming a compact three-dimensional framework. Optical spectroscopy and resistivity measurements reveal a semiconducting behavior with a direct band gap of 1.08(2) eV and activation energy of 0.36(1) eV. Thermopower measurements suggest the majority carriers of LaBiS3 are electrons. Heat capacity measurement indicates no phase transition from 2 to 300 K. Band structure calculations at the density function level support the presence of a direct band gap in LaBiS3.

Han, Fei↗

[Ni(H{sub 2}O){sub 4}]{sub 3}[U(OH,H{sub 2}O)(UO{sub 2}){sub 8}O{sub 12}(OH){sub 3}], crystal structure and comparison with uranium minerals with U{sub 3}O{sub 8}-type sheets

The new U(VI) compound, [Ni(H{sub 2}O){sub 4}]{sub 3}[U(OH,H{sub 2}O)(UO{sub 2}){sub 8}O{sub 12}(OH){sub 3}], was synthesized by mild hydrothermal reaction of uranyl and nickel nitrates. The crystal-structure was solved in the P-1 space group, a=8.627(2), b=10.566(2), c=12.091(4) A and alpha=110.59(1), beta=102.96(2), gamma=105.50(1){sup o}, R=0.0539 and wR=0.0464 from 3441 unique observed reflections and 151 parameters. The structure of the title compound is built from sheets of uranium polyhedra closely related to that in beta-U{sub 3}O{sub 8}. Within the sheets [(UO{sub 2})(OH)O{sub 4}] pentagonal bipyramids share equatorial edges to form chains, which are cross-linked by [(UO{sub 2})O{sub 4}] and [UO{sub 4}(H{sub 2}O)(OH)] square bipyramids and through hydroxyl groups shared between [(UO{sub 2})(OH)O{sub 4}] pentagonal bipyramids. The sheets are pillared by sharing the apical oxygen atoms of the [(UO{sub 2})(OH)O{sub 4}] pentagonal bipyramids with the oxygen atoms of [NiO{sub 2}(H{sub 2}O){sub 4}] octahedral units. That builds a three-dimensional framework with water molecules pointing towards the channels. On heating [Ni(H{sub 2}O){sub 4}]{sub 3}[U(OH,H{sub 2}O)(UO{sub 2}){sub 8}O{sub 12}(OH){sub 3}] decomposes into NiU{sub 3}O{sub 10}. - Graphical abstract: The framework of [Ni(H{sub 2}O){sub 4}]{sub 3}[U(OH,H{sub 2}O)(UO{sub 2}){sub 8}O{sub 12}(OH){sub 3}] built from uranium polyhedra sheets pillared by Ni-centered octahedra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and crystal structure of RMgSi{sub 2} compounds (R=La, Ce, Pr, Nd), a particular example of linear intergrowth

A new series of rare earth compounds with stoichiometry RMgSi{sub 2} (R=La, Ce, Pr, Nd) is reported. The single crystal X-ray diffraction showed that CeMgSi{sub 2}, which melts congruently at 1200 deg. C, crystallizes in a new tetragonal structure type (I4{sub 1}/amd, tI32, a=4.2652(4) A, c=36.830(4) A, Z=8; wR{sub 2}=0.042 (19 parameters, 393F{sub 0}{sup 2}), R{sub 1}=0.018 (297F{sub 0}>4sigmaF{sub 0}). The crystal structure of CeMgSi{sub 2} can be formally built up by alternating along the z direction four CeMg{sub 2}Si{sub 2}-type CeMg{sub 2}Si{sub 2} slabs with four AlB{sub 2}-type CeSi{sub 2} slabs, one after the other. The structural model obtained from a CeMgSi{sub 2} single crystal has been confirmed for the La, Pr and Nd homologous compounds by means of Rietveld refinement. The trend of the unit-cell parameters, plotted versus the R{sup 3+} ionic radius, shows a linear behaviour, which strongly suggests a trivalent state for the Ce atoms. An analysis of the features of this new structure is reported, in comparison with the other known CeMg{sub 2}Si{sub 2}/AlB{sub 2}-type linear intergrowth compounds. - Graphical abstract: The new crystal structure of CeMgSi{sub 2} can be formally built up by alternating along the z direction, four CeMg{sub 2}Si{sub 2}-type CeMg{sub 2}Si{sub 2} slabs with four AlB{sub 2}-type CeSi{sub 2} slabs, one after the other. A close symmetry relationship holds between the ThSi{sub 2} and CeMgSi{sub 2} structure types, as shown in the figure.

36 MATERIALS SCIENCE↗