Search NASA⌕ Search

SEARCH · Search NASA

Results for “bulk modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Equation of State of CAS Phase to Pressure of the Uppermost Lower Mantle at Ambient Temperature

The CAS phase is a major constituent phase for the continental crust and basaltic compositions at the P-T conditions of the Earth's mantle, and potentially plays an important role in the geodynamic processes related to slab subduction. Its equation of state has been investigated here at ambient temperature up to about 25 GPa by using a diamond-anvil cell and synchrotron X-ray radiation. Its P-V data, fitted to the third-order Birch-Murnaghan equation, yield an isothermal bulk modulus (K'{sub T}) of 185 (9) GPa and first pressure derivative (K'{sub T} ) of 7.2 (12). If K'{sub T} is fixed at 4, the derived K{sub T} is 212 (4) GPa. Additionally, the CAS phase is strongly elastically anisotropic, with its a-axis direction much less compressible than c-axis direction: K{sub T-a}:K{sub T-c} = 2.19.

58 GEOSCIENCES↗

Stability of hume rothery phases in Cu−Zn alloys at pressures up to 50 GPa

The crystal structure of the {gamma}-brass phase Cu{sub 5}Zn{sub 8} is confirmed with single-crystal X-ray diffraction and a charge-coupled device (CCD) detector to be cubic with 52 atoms in the unit cell, space group I{bar 4}3m, and the refined atomic positions are in good agreement with previously reported data. The structural behavior of {alpha}-(fcc), {beta}-brass (cI52) phases of the Cu-Zn alloy system has been studied under pressure using diamond anvil cells and powder X-ray diffraction with synchrotron radiation. The appearance of additional peaks in the diffraction patterns of {alpha}- and {beta}-phases indicates the beginning of transitions to new phases at 17 and 37 GPa, respectively. The complex cubic {gamma}-brass phase (52 atoms in the unit cell, space group I{bar 4}3m) is observed to be stable up to at least 50 GPa. The bulk modulus K 0 was determined as 140(4) GPa for {alpha}-, 139(5) for {beta}-, and 121(2) for {gamma}-phase assuming K 0 = 4. The structural stability of brass phases of the Cu-Zn system under pressure is discussed in terms of the Hume-Rothery mechanism.

36 MATERIALS SCIENCE↗

Ab Initio Modeling of fcc Fe-Co-Cr-Ni High Entropy Alloys with Full Composition Range

The Fe-Co-Cr-Ni quaternary system has been studied extensively in the past decade, not only because of the superior properties achieved like high tensile ductility and fracture toughness, but also it is the foundation for the development of FeCrCoNi-based HEAs. However, most of the investigations are mainly focusing on the equiatomic and semi-equiatomic compositions. The physical properties of non-equiatomic compositions are barely explored. In the current work, the ab initio approach is adopted to predict the lattice parameter, structure stabilities, elastic properties, and enthalpy of formations of fcc Fe-Cr-Co-Ni HEA single crystals with the special quasirandom structure (SQS) method. To expand the design of Fe-Co-Cr-Ni HEAs into a full composition range, the current simulations cover all the binaries, ternaries, and the whole quaternary system. The 2-D composition-property contour diagrams are created to show the physical properties in the ternary and quaternary systems. Furthermore, our investigation shows that the fcc alloys' lattice parameter increases with the addition of Fe and Cr and decreases with Ni and Co. In addition to the enthalpy of formation at o K, the shape distortion rate is proposed to be another essential parameter to evaluate crystal stability. The results show the addition of Cr would destabilize the fcc lattice and cause symmetry breaking. Finally, the result of Pugh’s ratio shows that most of the fcc alloys show ductile behavior (P > 1.75), especially for the alloys around Fe 3 Ni, FeCo, and Fe 2 NiCo (P > 2.5). The brittle behavior (P < 1.75) is located around Fe 3 Cr and Fe 2 CoCr. Meanwhile, Cr 2 NiCo and Cr 2 FeNiCo are considered promising compositions to be tried and verified experimentally because of the higher bulk modulus and moderate shear modulus.

36 MATERIALS SCIENCE↗

Temperature-Dependent Mechanical Properties of Ni-Based Concentrated Alloys: Insights from First-Principles Calculations

The present work focuses on predicting temperature-dependent mechanical properties of Ni-based concentrated alloys Ni 18 Cr 10 Co 10 Fe 6 M 4 (abbreviated by X 44 M 4 , with M = Al, V, Mn, Fe, Nb, Mo, and W) using density functional theory (DFT). These predictions are based on shear (plastic) and elastic deformations, utilizing the special quasirandom structure (SQS), the phonon-based quasiharmonic approach (QHA), and the quasistatic approach. The resulting properties include coefficient of thermal expansion via QHA, ideal shear strength (τ IS ), and stable and unstable stacking fault energies (γ SF and γ US ) through pure alias shear deformation, and elastic constants (c ij ), bulk modulus (B 0 ), and shear modules (G 0 ) via elastic deformation. Notably, predicting accurate γ SF is challenging due to uncertainties that can exceed the γ SF values. τ IS and γ US exhibit a strong linear relationship, enabling the accurate prediction of γ US based on the precisely determined τ IS . All mechanical properties of X 44 M 4 decrease with increasing temperature, except for some γ SF cases such as X 44 M 4 with M = V, Mn, Fe, Mo, and W. Among the X 44 M 4 alloys, X 44 Nb 4 exhibits the lowest τ IS , γ US , and G 0 values, and the highest B 0 /G 0 ratio, while X 44 Mn 4 has the lowest B 0 and B 0 /G 0 ratio. We found that volume is a crucial descriptor for understanding and modeling mechanical properties (except B0 and maybe also γ SF ) affected by alloying elements and temperature. Ni-based dilute alloys (e.g., Ni 11 M 1 and Ni 31 M 1 ) and concentrated alloys (e.g., X 44 M 4 ) show similar trends in mechanical properties influenced by alloying elements and temperature, simplifying the analysis and design of Ni-based alloys.

Elastic properties↗

Ab-initio calculations of the hydrogen-uranium system. Part I: Surface phenomena, absorption, transport and trapping

Density functional theory was applied to the initial steps of uranium hydriding: surface phenomena, absorption, bulk transport and trapping. H adsorbs exothermically to the (0 0 1) surface, yet H absorption into the bulk is endothermic, with off-center octahedral absorption having the lowest absorption energy of 0.39 eV, relative to molecular H{sub 2}. H absorption in interstitial sites causes a local softening of the bulk modulus. Diffusion of H in unstrained {alpha}-U has a barrier of 0.6 eV. The energy of H absorption adjacent to the chemical impurities C, S, Si was lowered by an amount proportional to the size of the impurity atom, and the resulting lattice strain Si > S > C. Thus, impurities may promote hydriding by providing surfaces or prestrained zones for H uptake.

36 MATERIALS SCIENCE↗

Inverse modeling of ground surface uplift and pressure with iTOUGH-PEST and TOUGH-FLAC: The case of CO2 injection at In Salah, Algeria

Ground deformation, commonly seen in storage projects, carries useful information about processes occurring in the injection formation. The Krechba gas field at In Salah (Algeria) is one of the best-known sites for studying ground surface deformation during geological carbon storage. At this first industrial-scale on-shore CO 2 demonstration project, satellite-based ground-deformation monitoring data of high quality are available and used to study the large-scale hydrological and geomechanical response of the system to injection. In this work, we carry out coupled fluid flow and geomechanical simulations to understand the uplift at three different CO 2 injection wells (KB-501, KB-502, KB-503). Previous numerical studies focused on the KB-502 injection well, where a double-lobe uplift pattern has been observed in the ground-deformation data. The observed uplift patterns at KB-501 and KB-503 have single-lobe patterns, but they can also indicate a deep fracture zone mechanical response to the injection.The current study improves the previous modeling approach by introducing an injection reservoir and a fracture zone, both responding to a Mohr-Coulomb failure criterion. In addition, we model a stress-dependent permeability and bulk modulus, according to a dual continuum model. Mechanical and hydraulic properties are determined through inverse modeling by matching the simulated spatial and temporal evolution of uplift to InSAR observations as well as by matching simulated and measured pressures. The numerical simulations are in agreement with both spatial and temporal observations. The estimated values for the parameterized mechanical and hydraulic properties are in good agreement with previous numerical results. In addition, the formal joint inversion of hydrogeological and geomechanical data provides measures of the estimation uncertainty.

58 GEOSCIENCES↗

Experimental and theoretical high pressure study of calcium hydroxyaluminate phases

Five calcium hydroxyaluminate phases have been investigated by synchrotron powder diffraction at high-pressure: two hydrogarnets, kuzelite, stratlingite and ettringite. The obtained bulk modulus, K{sub 0}, for kuzelite, stratlingite and ettringite were 23(1), 27(1) and 30(3) GPa, respectively. Kuzelite and stratlingite underwent transformations above 1 GPa likely releasing interlayer water. Kuzelite becoming markedly amorphous and stratlingite remained crystalline, K{sub 0} = 58(6) GPa in the 1.5–5.5 GPa pressure range. The structural behavior for hydrogarnet samples is prone to the use of pressure transmitting media. K{sub 0} for Ca{sub 3}Al{sub 2}(OH){sub 12} was 81(2) and 76(2) GPa for silicone oil and alcohol mixture, respectively. A similar study for Ca{sub 3}Al{sub 1.7}Fe{sub 0.3}(OH){sub 12} yielded 73(1) and 58(1) GPa for silicone oil and alcohol mixture, respectively. Atomistic calculations using periodic Density Functional Theory showed that the softening in iron-doped katoite, when compared to stoichiometric katoite, can be assigned primarily to greater compressibility of Ca−O dodecahedra, which overcompensates strengthening of hydrogen bonding between Al/Fe hydroxide groups.

36 MATERIALS SCIENCE↗

Modelling the development of capillary pressure in freshly 3D-printed concrete elements

3D concrete printing is a promising technology recently developed to automate construction. Since no formwork is used in this technology to support and protect fresh concrete, there are two aspects which considerably accelerate the development of capillary pressure in 3D-printed concrete in comparison to conventionally placed concrete: i) high stiffness of 3D-printed needed to provide sufficient buildability, and ii) very early and fast evaporation of pore water. Accelerated development of capillary pressure may lead to severe plastic shrinkage cracking in 3D-printed elements and, hence, need to be mitigated. This investigation aims at providing a poromechanical model for capillary pressure development in 3D-printed elements. To simulate the development of capillary pressure and plastic shrinkage, environmental factors, material properties, and element geometry need to be considered as a whole. The model inputs – coefficient of permeability, static bulk modulus, air entry pressure and chemical shrinkage rate – were determined experimentally. The model was validated for two fine-grained concretes. Both 3D-printed materials yielded faster capillary pressure increase in comparison to cast concrete, while partial substitution of cement with silica fume further accelerated the capillary pressure development. Furthermore, due to the lower permeability of the mixture containing silica fume, the gradient of capillary pressure between 3D-printed layers increased, as did the gradient of plastic shrinkage.

36 MATERIALS SCIENCE↗

The intrinsic mechanical properties of hydromagnesite, Mg 5 (CO 3 ) 4 (OH) 2 ·4H 2 O, a key phase of reactive MgO carbonate cement

To potentially enable CO 2 sequestration, reactive MgO carbonate cement is emerging as an alternative binder to Portland cement. Understanding the mechanical properties of its binding phase is critical for understanding the strength development and performing materials design for reactive MgO cement systems; however, the intrinsic mechanical properties of hydromagnesite (Mg 5 (CO 3 ) 4 (OH) 2 ·4H 2 O), a key binding phase, remain unexplored. Here the present study utilized synchrotron-based high-pressure X-ray diffraction to determine the unit cell-scale, intrinsic mechanical properties of hydromagnesite for the first time. Up to hydrostatic loading of 7.7 GPa, the bulk modulus of hydromagnesite was determined as 59 GPa or 71 GPa fitted using the second-order or third-order Birch-Murnaghan equation of state, which we contextualize with binding phases in various cement systems. The experiment results are applicable in materials design of low-carbon concrete and valuable for the validation and calibration of atomistic models.

36 MATERIALS SCIENCE↗

On domain symmetry and its use in homogenization

The present study focuses on solving partial differential equations in domains exhibiting symmetries and periodic boundary conditions for the purpose of homogenization. We show in a systematic manner how the symmetry can be exploited to significantly reduce the complexity of the problem and the computational burden. This is especially relevant in inverse problems, when one needs to solve the partial differential equation (the primal problem) many times in an optimization algorithm. The main motivation of our study is inverse homogenization used to design architected composite materials with novel properties which are being fabricated at ever increasing rates thanks to recent advances in additive manufacturing. For example, one may optimize the morphology of a two-phase composite unit cell to achieve isotropic homogenized properties with maximal bulk modulus and minimal Poisson ratio. Typically, the isotropy is enforced by applying constraints to the optimization problem. However, in two dimensions, one can alternatively optimize the morphology of an equilateral triangle and then rotate and reflect the triangle to form a space filling D 3 symmetric hexagonal unit cell that necessarily exhibits isotropic homogenized properties. One can further use this D 3 symmetry to reduce the computational expense by performing the “unit strain” periodic boundary condition simulations on the single triangle symmetry sector rather than the six fold larger hexagon. In this paper we use group representation theory to derive the necessary periodic boundary conditions on the symmetry sectors of unit cells. The developments are done in a general setting, and specialized to the two-dimensional dihedral symmetries of the abelian D 2 , i.e. orthotropic, square unit cell and nonabelian D 3 , i.e. trigonal, hexagon unit cell. We then demonstrate how this theory can be applied by evaluating the homogenized properties of a two-phase planar composite over the triangle symmetry sector of a D 3 symmetric hexagonal unit cell.

36 MATERIALS SCIENCE↗

A continuum framework for coupled solid deformation–fluid flow through anisotropic elastoplastic porous media

We present a continuum framework for coupled solid deformation–fluid flow in anisotropic elastoplastic porous media. A thermodynamic formulation of the coupled processes gives rise to an anisotropic Biot tensor that is a function of drained elastic tangent moduli tensor of the solid skeleton and the intrinsic bulk modulus of the solid constituent. Two effective stress measures emerge from the formulation, namely, σ', which is energy-conjugate to the elastic strain, and σ'', which is energy-conjugate to the plastic strain. For the special case of transverse isotropy that is commonly encountered in natural rocks, the Biot tensor can be expressed in terms of its normal and tangential components to the bedding plane, along with a microstructure tensor. Apart from its thermodynamic consistency, an advantage of this new formulation is that standard mixed finite element formulation can be employed to discretize the domain and solve initial boundary-value problems. We conduct plane strain simulations of coupled solid deformation–fluid flow in a transversely isotropic porous medium to demonstrate the impacts of material anisotropy, stress history, and the Biot tensor on the system response.

42 ENGINEERING↗

First-principles study of structural, elastic, electronic, vibrational and thermodynamic properties of uranium aluminides

The structural, elastic, electronic, vibrational and thermodynamic properties of uranium aluminides UAl x (x = 2, 3, 4) were studied by density functional theory calculations. The single crystal elastic constants of UAl x were predicted using the stress-strain method, which were further used to calculate the polycrystalline aggregate properties of UAl x , including bulk modulus, shear modulus, Young’s modulus, and Poisson’s ratio, etc. The calculated electronic density of states confirm that UAl x compounds are metallic phases with majority states at the Fermi level contributed by U 5 f electrons. The phonon dispersion relations and density of states show that the low frequency acoustic phonon modes of UAl x are dominated by the lattice vibration of uranium atoms while high frequency optical phonon modes are from the vibration of aluminum atoms. Using quasiharmonic approximation, thermodynamic properties of UAl x , including Gibbs free energy, entropy, heat capacity, and linear thermal expansion coefficient, were predicted by including both lattice vibrational and thermal electronic contributions. The thermal electronic energy was found to be crucial for the description of the temperature dependence of the thermodynamic properties. In conclusion, the derived Gibbs energy functions of UAl x are expected to be useful to the thermodynamic modeling of the ternary U-Mo-Al system.

36 MATERIALS SCIENCE↗

Machine learning elastic constants of multi-component alloys

The present manuscript explores application of machine learning methods for determining elastic constants and other derived mechanical properties of multi-component alloys. Here, a number of machine learning models, including linear regression, neural network and random forest based models, are trained and tested on a dataset of binary alloys generated using density functional theory (DFT) calculations and spanning over a large number of elemental species in the periodic table. Starting with a wide range of simple and easily accessible compositionally-averaged elemental features, a correlation-based feature selection strategy was used to systematically down-select a set of most relevant features towards the prediction of the elasticity tensor components. The true predictive performance and the associated uncertainties of the models were established by testing on unseen data and bootstrapping, respectively. A single and pair-wise feature partial dependence analysis was performed to visualize the average property trends in the multi-dimensional feature space in order to further understand the achieved predictive performance. The utility of the trained model is further demonstrated by obtaining sufficiently accurate yet highly efficient approximations for bulk modulus, Young’s modulus, shear modulus and Poisson’s ratio for alloys beyond the binary space (i.e., two-component alloys) on which the model was originally trained. More importantly, we test and validate the predictive performance of the developed model directly against the experimentally measured elastic constants of technologically relevant multi-component alloys (such as, Ni- and Ti-based alloys). Finally, utility of such a data-enabled route is demonstrated by predicting the possible range of various elastic properties for vast composition space available within the five component Ni-Cr-Fe-Mo-W alloy system in a high-throughput manner.

36 MATERIALS SCIENCE↗

Effect of pressure and temperature on structural stability of potential hydrogen storage compound Li[subscript 3]AlH[subscript 6]

The crystal structure of Li{sub 3}AlH{sub 6} was investigated at high pressures upto 27 GPa using a diamond anvil cell with synchrotron radiation in addition to high temperature X-ray diffraction. Density functional theoretical (DFT) calculations were performed simultaneously. While the structure of Li{sub 3}AlH{sub 6} is stable on increasing temperature, the results of high pressure experiments show a pressure induced phase transition from the ambient R {bar 3} phase to a high pressure cubic Ia{bar 3} phase around 10.6 GPa. The transition pressure of 10.6 GPa and the bulk modulus value B{sub 0} = 32(2) GPa for the R{bar 3} phase obtained are in good agreement with the theoretical results.

08 HYDROGEN↗

Ti 3p electrons: core or valence?

The debate over where Ti 3p electrons should be placed (in the core or valence) has been addressed using pseudopotential-based density functional theory. This work has focused on the TiO2 rutile phase using two different Ti pseudopotentials with 4 or 10 valence electrons, depending on how the Ti 3p electrons are treated. The electronic structure of bulk TiO2 are very similar for the two potentials, and both potentials show similar bulk properties (lattice parameters, bulk modulus). Adsorption of several different types of molecules on a (110) surface gives similar results for organic and inorganic molecules, while adsorption of metal atoms leads to noticeable differences in adsorption energies (26% difference between the two pseudopotentials). This discrepancy is attributed to a larger change in the electronic state of Ti upon metal adsorption, compared to organic or inorganic molecule adsorption. The results also show that the two pseudopotential methods describe oxygen vacancies slightly differently, with a difference in vacancy formation energy being 0.32 eV. Ti in other oxidation states was modeled and both pseudopotentials work reasonably well. This study shows that the 3p electrons can often be treated as core states, but care must be taken to verify that this does not affect the simulation accuracy. Funding was provided by the Department of Energy, Office of Basic Energy Sciences. Computational resources were provided by the Molecular Science Computing Facility located at the Environmental Molecular Science Laboratory in Richland, WA and the National Energy Research Scientific Computing Center at Lawrence Berkeley National Laboratory. All work was performed at Pacific Northwest National Laboratory (PNNL). Battelle operates PNNL for the U.S. Department of Energy.

36 MATERIALS SCIENCE↗

Guest disorder and high pressure behavior of argon hydrates

The structure of argon hydrate was studied at ambient pressure and low temperature, and between 1.7 and 4.2 GPa at 295 K. This analysis produced a single Ar guest atom, positionally disordered off-center in the large cages of sII. Above 1.7 GPa Ar clathrate transformed to a mixture of a body-centered orthorhombic filled-ice phase, which can be viewed as a polytype of ice-Ih, and high pressure forms of pure ice. The guest disorder is further substantiated by analysis of the guest to host ratio in this high pressure filled-ice structure. The bulk modulus of Ar filled-ice found to be 11.7 {+-} 0.4 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure induced structural changes in the potential hydrogen storage compound ammonia borane: A combined X-ray, neutron and theoretical investigation

The crystal structure of NH{sub 3}BH{sub 3} was investigated using synchrotron high pressure X-ray diffraction (HPXRD) up to 27 GPa and neutron diffraction up to 5 GPa. Density functional theoretical (DFT) calculations were carried out simultaneously for comparison. The results confirm a pressure induced phase transition from the tetragonal I4mm phase to a high pressure orthorhombic Cmc21 phase around 1.22 GPa. Further increase of pressure above 8 GPa, we observed a second structural transition from Cmc21 to a triclinic P1 phase which are reversible with small hysteresis. The transition pressures and the bulk modulus obtained experimentally are in good agreement with theory.

08 HYDROGEN↗

Lattice dynamics and thermomechanical properties of zirconium(IV) chloride: Evidence for low-temperature negative thermal expansion

For this research, the crystal structure, lattice dynamics and themomechanical properties of bulk monoclinic zirconium tetrachloride (ZrCl 4 ) have been investigated using zero-damping dispersion-corrected density functional theory [DFT-D3(zero)]. Phonon analysis reveals that ZrCl 4 (cr) undergoes negative thermal expansion (NTE) near T≈10 K, with a coefficient of thermal expansion of α=-1.2 ppm K -1 and a Grüneisen parameter of γ=-1.1. The bulk modulus is predicted to vary from K 0 =8.7 to 7.0 GPa in the temperature range 0–550 K. Lastly, the isobaric molar heat capacity derived from phonon calculations within the quasi-harmonic approximation is in fair agreement with existing calorimetric data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗