Search NASA⌕ Search

SEARCH · Search NASA

Results for “catalytic material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Applications of spherical shells

A new technique of producing hollow spheres of many materials at a very rapid rate, at very low cost, and with high reproducibility of shell diameter and wall thickness has been developed. Shells formed of metal or of other solid materials are expected to find numerous technical and industrial applications. For example, metal shells might be used as inertial confinement fusion targets, or as the principal constituents in lightweight structural materials for NASA Space Stations or DOD large antennas and mirrors, or be employed as containers for phase-change heat-storage media, or serve as containers for hazardous materials, or be employed as catalytic surface agents.

Wang, T. G.↗

Evolution of non-condensable gas in ammonia heat pipes

Accumulation of noncondensible gas (NCG) has been observed in ammonia heat pipes. NCG has been found to be detrimental to the performance of heat pipes and can result in complete operational failure. A kinetic and thermodynamic analysis has been performed that evaluates the dissociation of ammonia under various conditions and predicts the amount of NCG present in heat pipes. The analysis indicates that the observed NCG in ammonia heat pipes can be attributed to the dissociation of ammonia into its constituents, hydrogen and nitrogen. It shows time and temperature to be the important parameters, in conjunction with the catalytic characteristic of the container material.

Richter, Robert↗

Effects of Nonequilibrium at Edge of Boundary Layer on Convective Heat Transfer to a Blunt Body

This investigation is a continuation of a previous study on nonequilibrium convective heat transfer to a blunt body. In the previous study, for relatively high Reynolds number flows, it was found that: nonequilibrium convective heat transfer to a blunt body is not strongly dependent on freestream parameters, provided that the thermochemical equilibrium is reached at the edge of boundary layer; and successful testing of convective heat transfer in an arc-jet environment is possible by duplicating the surface pressure and total enthalpy. The nonequilibrium convective heat transfer computations are validated against the results of Fay and Riddell/Goulard theory. Present work investigates low Reynolds number conditions which are typical in an actual arc-jet flow environment. One expects that there will be departures from the Fay and Riddell/Goulard result since certain assumptions of the classical theory are not satisfied. These departures are of interest because the Fay and Riddell/Goulard formulas are extensively used in arc-jet testing (e.g., to determine the enthalpy of the flow and the catalytic efficiency of heat shield materials). For practical sizes of test materials, density of the test flow (and Reynolds number) in an arc-jet is such that thermochemical equilibrium may not be reached at the edge of boundary layer. For blunt body flows of nitrogen and air, computations will be presented to show the effects of thermochemical nonequilibrium at the boundary layer edge on nonequilibrium heat transfer.

Goekcen, Tahir↗

On-Board Chemical Propulsion Technology

On-board propulsion functions include orbit insertion, orbit maintenance, constellation maintenance, precision positioning, in-space maneuvering, de-orbiting, vehicle reaction control, planetary retro, and planetary descent/ascent. This paper discusses on-board chemical propulsion technology, including bipropellants, monopropellants, and micropropulsion. Bipropellant propulsion has focused on maximizing the performance of Earth storable propellants by using high-temperature, oxidation-resistant chamber materials. The performance of bipropellant systems can be increased further, by operating at elevated chamber pressures and/or using higher energy oxidizers. Both options present system level difficulties for spacecraft, however. Monopropellant research has focused on mixtures composed of an aqueous solution of hydroxl ammonium nitrate (HAN) and a fuel component. HAN-based monopropellants, unlike hydrazine, do not present a vapor hazard and do not require extraordinary procedures for storage, handling, and disposal. HAN-based monopropellants generically have higher densities and lower freezing points than the state-of-art hydrazine and can higher performance, depending on the formulation. High-performance HAN-based monopropellants, however, have aggressive, high-temperature combustion environments and require advances in catalyst materials or suitable non-catalytic ignition options. The objective of the micropropulsion technology area is to develop low-cost, high-utility propulsion systems for the range of miniature spacecraft and precision propulsion applications.

Reed, Brian D.↗

Material Compatibility with Space Storable Propellants. Design Guidebook

An important consideration in the design of spacecraft for interplanetary missions is the compatibility of storage materials with the propellants. Serious problems can arise because many propellants are either extremely reactive or subject to catalytic decomposition, making the selection of proper materials of construction for propellant containment and control a critical requirement for the long-life applications. To aid in selecting materials and designing and evaluating various propulsion subsystems, available information on the compatibility of spacecraft materials with propellants of interest was compiled from literature searches and personal contacts. The compatibility of both metals and nonmetals with hydrazine, monomethyl hydrazine, nitrated hydrazine, and diborance fuels and nitrogen tetroxide, fluorine, oxygen difluoride, and Flox oxidizers was surveyed. These fuels and oxidizers encompass the wide variety of problems encountered in propellant storage. As such, they present worst case situations of the propellant affecting the material and the material affecting the propellant. This includes material attack, propellant decomposition, and the formation of clogging materials.

Uney, P. E.↗

Tuning Surface Acidity of Mixed Conducting Electrodes: Recovery of Si‐Induced Degradation of Oxygen Exchange Rate and Area Specific Resistance

Abstract Metal oxides are an important class of functional materials, and for many applications, ranging from solid oxide fuel/electrolysis cells, oxygen permeation membranes, and oxygen storage materials to gas sensors (semiconducting and electrolytic) and catalysts, the interaction between the surface and oxygen in the gas phase is central. Ubiquitous Si‐impurities are known to impede this interaction, commonly attributed to the formation of glassy blocking layers on the surface. Here, the surface oxygen exchange coefficient ( k chem ) is examined for Pr 0.1 Ce 0.9 O 2‐δ (PCO), a model mixed ionic electronic conductor, via electrical conductivity relaxation measurements, and the area‐specific resistance (ASR) by electrochemical impedance spectroscopy. It is demonstrated that even low silica levels, introduced by infiltration, depress k chem by a factor 4000, while the ASR increases 40‐fold and we attribute this to its acidity relative to that of PCO. The ability to fully regenerate the poisoned surface by the subsequent addition of basic Ca‐ or Li‐species is further shown. This ability to not only recover Si‐poisoned surfaces by tuning the relative surface acidity of an oxide surface, but subsequently outperform the pre‐poisoned response, promises to extend the operating life of materials and devices for which the catalytic oxygen/solid interface reaction is central.

30 DIRECT ENERGY CONVERSION↗

Controlling Structural, Electronic, and Energy Flow Dynamics of Catalytic Processes through Tailored Nanostructures

MoS 2 (molybdenum disulfide) is a highly-versatile catalyst material for support of numerous reactions from hydrodesulfurization and denitrogenation to the focus of this renewal proposal: hydrogenation of CO/CO 2 towards (higher) alcohols. At the same time, MoS 2 is a non-toxic, environmentally-benign and rather inert material- which under ambient conditions for some time has served as a lubricant and, more recently, as next-generation electronic material. The apparent contrast between inertness and stability in ambient, and catalytic activity under reactive conditions is puzzling and calls for a synergistic theoretical and experimental investigation with the long-term objective of enabling the rational design of MoS 2 -based catalysts for alcohol-formation reactions by providing a microscopic understanding of the environmental factors that determines site activity and selectivity. Our research project seeks answers to the questions (a) what conformation does MoS 2 adopt under reaction conditions (as opposed to that under ultrahigh vacuum and low temperatures)?; (b) what reaction pathways exist on such a material?; (c) how can the local environment of the active sites be manipulated so as to make MoS 2 an efficient catalyst for production of higher alcohol from syngas? In particular, research strategies will explore how the basal plane composed of sulfur atoms can be activated so as to exhibit a reactivity of its own, by addressing three research targets and building on extensive preliminary and enabling work: (1) vacancies and vacancy aggregates on the basal plane; (2) non-local catalyst transformation through alkali doping, hydrogenation and phase transition; (3) fabrication of a metal-nanoparticle-activated MoS 2 system, in which particle anchoring, reactive sites and pathways as well as selectivity are controlled by design, as an example of predictive development of a catalyst material,. All strategies are directed to improve the efficacy of the key reactive sites and selectivity of chemical pathways by design, to replace the inefficient methodology of trial and error in catalyst development. This research project represents a synergistic combination of computational guidance, foundational surface-science-based experiments and validation under reactive conditions that aims at transformative new insights into the working of MoS 2 -based hydrogenation-catalysts, a topic squarely at the center of the interest of DOE BES. Guided and led by Talat Rahman, a computational physicist, this project will apply density functional theory to understand structure, reaction pathways and chemical potentials associated with MoS 2 -based CO/CO 2 hydrogenation, augmented by kinetic Monte Carlo methods for reaction rates and prefactors as well as ab-initio molecular dynamics for evaluation of thermal stability. Complementary experimental input and validation will originate from co-PI Ludwig Bartels, a physical chemist and materials scientist, whose group focuses on local imaging and preparation of MoS 2 materials, from co-PI Peter Dowben, an experimental physicist, whose group is expert in the spectroscopy of occupied and unoccupied electronic states, and from senior collaborator Michael White of Brookhaven National Laboratory, whose group generates high-resolution electronic and activity information on size-selected well-defined metal chalcogenide clusters. This collaborative effort will enable a comprehensive understanding of the correlation of structural integrity and catalytic activity of MoS 2 in forms ranging from extended films to individual particles with known geometries and binding sites. Alcohol formation from syngas is a rapidly emerging application that has great potential through facile, economic, and decentralized biomass gasification. CO 2 activation is one of the most pressing concerns of our time: increasing CO 2 levels in the atmosphere change the climate and expose the globe to environmental transformations with the potential for enormous economic and societal impact. We will investigate CO/CO 2 hydrogenation via an interdisciplinary research collaboration with established synergy – one that, in accordance with the mission of the DOE, involves accredited Hispanic-Serving Institutions and that, through student exchange with international collaborators and National Labs, will directly benefit a broad spectrum of communities and generate human resources in sciences essential to their future.

2D materials↗

PILBCP-IL Composite Ionomers for High Current Density Performance

Wide-spread commercialization of fuel cell electric vehicles using proton exchange membrane fuel cell (PEMFC) power sources requires that several existing limitations be addressed. These include: (1) a reduction in platinum (Pt) loading in the catalytic electrodes, (2) improvements in reactant and electronic mobility throughout the catalytic electrodes, (3) reduction in the reliance on materials derived from polluting “forever chemicals”, and (4) a significant improvement in the operational longevity of catalytic electrode components. In this project, a team of two universities, Drexel University and Texas A&M University, one national lab, National Renewable Energy Laboratory, and one company, General Motors, collaborated to develop a new cathode ionomer chemistry that would address these limitations and result in an improvement in performance over existing ionomer materials. The key technology developed through this collaborative project was a composite cathode ionomer encompassing an ionic liquid interlayer between Pt catalysts and a sulfonated polymerized ionic liquid block co-polymer (S-PILBCP) that possess the orthogonal properties of protonic conductivity and ionic liquid enhanced kinetics and durability (see schematic in Figure 1). The composite S-PILBCP ionomer eliminates many of the existing issues with perfluorosulfonic acid-based ionomers including active site blocking by sulfonate specific adsorption, restricted O 2 transport through ionomer films, limited humidity tolerance and active area loss for carbon pore confined catalyst particles, and use of polluting “forever chemicals”. Following successful integration of the developed composite ionic liquid into a PEMFC cathode catalyst layer, we demonstrate enhanced performance over Nafion containing cathodes with Pt/C and PtCo/C at both low and high current density. The performance with our composite S-PILBCP ionomer meets the Department of Energy (DOE) targets for light duty vehicle applications

08 HYDROGEN↗

Sustainable Oxide Electrocatalyst for Hydrogen- and Oxygen-Evolution Reactions

In this work, an electrocatalyst for water splitting based on earth-abundant metals is reported. This perovskite-oxide catalyst, CaSrFe 0.75 Co 0.75 Mn 0.5 O 6-δ (CSFCM), is examined using both experimental and computational methods. It demonstrates a combination of properties, which include (a) very high activity for the oxygen-evolution reaction with an overpotential of eta = 0.19 V at 10 mA/cm 2 , (b) high stability over 1000 cycles of catalysis, (c) the ability to catalyze the hydrogen-evolution reaction effectively in both acidic and basic conditions, and (d) catalytic activity as a single-phase bulk material without the need for any additional processing, multicomponent composite preparation, or nanofabrication. Therefore, the catalytic activity of CSFCM is intrinsic, making it a good benchmark compound for future studies of electrocatalytic parameters. This work also highlights the impact of systematic structural design on electrocatalytic activity. Results from density functional theory calculations indicate that in addition to an optimal e g occupancy of similar to 1, an additional descriptor, i.e., maximizing the number of free e g carriers, correlates with the electrocatalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Deep learning of electrochemical CO 2 conversion literature reveals research trends and directions

Large-scale and openly available material science databases are mainly composed of computer simulation results rather than experimental data. Some examples include the Materials Project, Open Quantum Materials Database, and Open Catalyst 2022. Unfortunately, building large-scale experimental databases remains challenging due to the difficulties in consolidating locally distributed datasets. In this work, focusing on the catalysis literature of CO 2 reduction reactions (CO 2 RRs), we present a machine learning (ML)-based protocol for selecting highly relevant papers and extracting important experimental data. First, we report a document embedding method (Doc2Vec) for collecting papers of greatest relevance to the specific target domain, which yielded 3154 CO 2 RR-related papers from six publishers. Next, we developed named entity recognition (NER) models to extract twelve entities related to material names (catalyst, electrolyte, etc.) and catalytic performance (Faradaic efficiency, current density, etc.). Further, among several tested models, the MatBERT-based approach achieved the highest accuracy, with an average F1-score of 90.4% and an F1-score of 95.2% in a boundary relaxation evaluation scheme. The accurate and accelerated NER-based data extraction from a large volume of catalysis literature enables temporal trend analyses of the CO 2 RR catalysts, products, and performances, revealing the potentially effective material space in CO 2 RRs. While this work demonstrates the effectiveness of our ML-based text mining methods for specifically CO 2 RR literature, the methods and approach are applicable to and may be used to accelerate the development of other catalytic chemical reactions.

36 MATERIALS SCIENCE↗

Electronic Structure of Single-Atom Alloys and Its Impact on The Catalytic Activities

Single-atom alloys (SAAs) are promising materials for heterogeneous catalysis due to their unique structure and electronic properties. SAAs have active sites narrowed down to the single-atom level, which combines the advantages of alloy materials and single-site catalysts. Given the unique structural feature of SAAs, their electronic properties can be more flexibly tailored than for their monometallic counterparts, which can be used to effectively control their catalytic activities. One interesting feature commonly observed for SAAs is the lower density of state (DOS) near the Fermi level than their bulk references. Comparing with results for their monometallic bulk reference, the most noticeable electronic property change in SAAs is the narrowing of the valence band, which gives them free-atom-like character. Moreover, the d-band position of both single atoms and their host metals can show a pronounced shift. These changes of electronic structure in SAAs could largely affect the adsorption behavior of adsorbates during the catalytic processes. Close examination of the relationship between electronic structure and catalytic activity can provide useful guidance for rational design of new catalysts with improved performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Mg–K-biochar bimetallic catalyst and its evaluation of glucose isomerization

Highly efficient isomerization of glucose to fructose is essential for valorizing cellulose fraction of biomass to value-added chemicals. This work provided an innovative method for preparing Mg-biochar and Mg–K-biochar catalysts by impregnating either MgCl 2 alone or in combination with different K compounds (Ding et al. in Bioresour Technol 341:125835, 2021, https://doi.org/10.1016/j.biortech.2021.125835 and KHCO 3 ) on cellulose-derived biochar, followed by hydrothermal carbonization and pyrolysis. Single active substance MgO existing in the 10 Mg–C could give better catalytic effect on glucose isomerization than the synergy of MgO and KCl crystalline material present in 10 Mg–KCl–C. But the catalytic effect of 10 Mg–C was decreased when the basic site of MgO was overloaded. Compared to other carbon-based metal catalysts, 10 Mg–KHCO3–C with 10 wt% MgCl 2 loading had excellent catalytic performance, which gave a higher fructose yield (36.7%) and selectivity (74.54%), and catalyzed excellent glucose conversion (53.99%) at 100 °C in 30 min. Scanning electron microscope–energy dispersive spectrometer and X-Ray diffraction revealed that the distribution of Mg 2+ and K+ in 10 Mg–KHCO 3 –C was uniform and the catalytic active substances (MgO, KCl and K2CO 3 ) were more than 10 Mg–C (only MgO). The synergy effects of MgO and K 2 CO 3 active sites enhanced the pH of reaction system and induced H 2 O ionization to form considerable OH– ions, thus easily realizing a deprotonation of glucose and effectively catalyzing the isomerization of glucose. In this study, we developed a highly efficient Mg–K-biochar bimetallic catalyst for glucose isomerization and provided an efficient method for cellulose valorization.

59 BASIC BIOLOGICAL SCIENCES↗

Metal-organic frameworks for the adsorption and catalytic transformations of carbon dioxide

Novel crystalline porous materials known as metal-organic frameworks (MOFs) and methods for their synthesis are provided herein. The MOFs include a M6(μ3-OH)8(OH)8(μ2,η2-(O2C)2cyclam)8 cluster, and a metal atom coordinated to the one or more cyclam of the cluster, wherein M is Zr or Hf, and the metal atom is any one of Cu, Ni, Cr, Ru, Co, and Gd. The MOFs can be used as an adsorbent, alone or in a medium with other components, of CO2. The MOFs can also be used as a catalyst for the transformation of CO2 and epoxides to cyclic carbonates. The MOFs can also be used in the electrochemical catalytic reduction of CO2. The MOFs can also be used for photocatalytic CO2 reduction for the production of carbon-based fossil fuels. The MOFs can also be used for light-induced nitric oxide (NO) release. The MOFs can also be used as magnetic resonance imaging (MRI) agents.

Morris, Amanda Jean↗

3D strain field reconstruction by inversion of dynamical scattering

Strain governs not only the mechanical response of materials but also their electronic, optical, and catalytic properties. For this reason, the measurement of the 3D strain field is crucial for a detailed understanding and for further development of material properties through strain engineering. However, measuring strain variations along the electron beam direction has remained a major challenge for (scanning-) transmission electron microscopy (S/TEM). In this article, we present a method for 3D strain field determination using 4D-STEM. The method is based on the inversion of dynamical diffraction effects, which occur at strain field variations along the beam direction. We test the method against simulated data with a known ground truth and demonstrate its application to an experimental 4D-STEM dataset from an inclined pseudomorphically grown Al0.47Ga0.53N layer.

Niermann, Laura↗

Heat‐Treated Aerogel as a Catalyst for the Oxygen Reduction Reaction

Abstract Aerogels are fascinating materials that can be used for a wide range of applications, one of which is electrocatalysis of the important oxygen reduction reaction. In their inorganic form, aerogels can have ultrahigh catalytic site density, high surface area, and tunable physical properties and chemical structures—important features in heterogeneous catalysis. Herein, we report on the synthesis and electrocatalytic properties of an iron–porphyrin aerogel. 5,10,15,20‐(Tetra‐4‐aminophenyl)porphyrin (H 2 TAPP) and Fe II were used as building blocks of the aerogel, which was later heat‐treated at 600 °C to enhance electronic conductivity and catalytic activity, while preserving its macrostructure. The resulting material has a very high concentration of atomically dispersed catalytic sites (9.7×10 20 sites g −1 ) capable of catalyzing the oxygen reduction reaction in alkaline solution ( E onset =0.92 V vs. RHE, TOF=0.25 e − site −1 s −1 at 0.80 V vs. RHE).

Zion, Noam↗

Tunable CHA/AEI Zeolite Intergrowths with A Priori Biselective Organic Structure‐Directing Agents: Controlling Enrichment and Implications for Selective Catalytic Reduction of NOx

Abstract A novel ab initio methodology based on high‐throughput simulations has permitted designing unique biselective organic structure‐directing agents (OSDAs) that allow the efficient synthesis of CHA/AEI zeolite intergrowth materials with controlled phase compositions. Distinctive local crystallographic ordering of the CHA/AEI intergrowths was revealed at the nanoscale level using integrated differential phase contrast scanning transmission electron microscopy (iDPC STEM). These novel CHA/AEI materials have been tested for the selective catalytic reduction (SCR) of NOx, presenting an outstanding catalytic performance and hydrothermal stability, even surpassing the performance of the well‐established commercial CHA‐type catalyst. This methodology opens the possibility for synthetizing new zeolite intergrowths with more complex structures and unique catalytic properties.

Bello‐Jurado, Estefanía↗

Tunable CHA/AEI Zeolite Intergrowths with A Priori Biselective Organic Structure‐Directing Agents: Controlling Enrichment and Implications for Selective Catalytic Reduction of NOx

Abstract A novel ab initio methodology based on high‐throughput simulations has permitted designing unique biselective organic structure‐directing agents (OSDAs) that allow the efficient synthesis of CHA/AEI zeolite intergrowth materials with controlled phase compositions. Distinctive local crystallographic ordering of the CHA/AEI intergrowths was revealed at the nanoscale level using integrated differential phase contrast scanning transmission electron microscopy (iDPC STEM). These novel CHA/AEI materials have been tested for the selective catalytic reduction (SCR) of NOx, presenting an outstanding catalytic performance and hydrothermal stability, even surpassing the performance of the well‐established commercial CHA‐type catalyst. This methodology opens the possibility for synthetizing new zeolite intergrowths with more complex structures and unique catalytic properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗