Search NASA⌕ Search

SEARCH · Search NASA

Results for “cathode interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Deciphering the Conflict Between Ion and Electron Percolating Networks in Solid-State Battery Cathodes

High-energy- and power-density solid state batteries require an optimal cathode composition and microstructural arrangement of cathode active material, solid-state electrolyte, conductive carbon, and binder to simultaneously support lithium-ion transport, electron conduction, and storage capacity. The ion and electron conducting phases in solid-state cathodes counteract each other's percolating networks as their mass ratios increase or decrease relative to each other. Here, we investigate targeted mass ratio variations of argyrodite solid electrolyte and two different types of conductive carbon (particles and fibers) in composite LiNi0.8Mn0.1Co0.1O2 (NMC811) solid-state cathodes to ascertain the ionic-electronic tradeoffs in cathode performance. Through ionic and electronic conductivity measurements on composite cathodes, as well as rate-testing and cycling performance in full cells, it is shown that the conductive carbon fibers form a percolative electronic network within the composite at a lower mass ratio (3-5 wt%) than particulate carbon (>5 wt%). The threshold to achieve electronic percolation coincides with higher accessible capacity in the cathode as the active material particles become electronically connected. However, carbon loadings beyond this percolation threshold lead to increased ion transport resistance, arising from disruptions to ionic conduction pathways and degraded contact at the interface between the electrolyte and active materials. Imaging, spectroscopy, and physics-based models quantitatively describe the relationship between carbon and electrolyte compositions and the cell's capacity and rate performance through percolation theory. This work demonstrates the importance of quantitatively understanding percolating networks in solid-state cells and that strategic engineering of conductive carbon morphologies can further increase the energy- and power-density of solid-state cells.

25 ENERGY STORAGE↗
DOE OSTI2024

Rational Design of High-Performing Electrodes in Energy Storage Devices

Rational design of interfaces with proper physico-chemical properties is necessary to optimize the performance of electrochemical devices, which requires fundamental understanding of the interfaces. In this project, we leveraged quantum mechanical and molecular dynamics simulations as well as machine learning (ML) technique to correlate the relationships between structure and properties including ion transport and electronic structures of cathode host materials in lithium-sulfur (Li-S) and carbon anode in sodium (Na) batteries for improved electrochemical performance.

25 ENERGY STORAGE↗
DOE OSTI2023

Stabilized lithium metal oxide electrode material and method of preparation

A stabilized lithium metal oxide cathode material comprises microparticles of lithium metal oxide in which individual particles thereof a core of lithium metal oxide and a coating of a different lithium metal oxide surrounding the core. There is an interface layer between the cores and the coatings in which there are gradients of metal ions in the direction of coating to core. The materials are made by a three stage process involving coprecipitating precursor metal hydroxide core particles at a controlled pH; coprecipitating a different metal hydroxide coating on the particles without controlling the pH; and then calcining the resulting coated precursor particles with lithium hydroxide to form the stabilized lithium metal oxide material.

Lipson, Albert L.↗
DOE OSTI2024

Stabilized lithium metal oxide electrode material and method of preparation

A stabilized lithium metal oxide cathode material comprises microparticles of lithium metal oxide in which individual particles thereof a core of lithium metal oxide and a coating of a different lithium metal oxide surrounding the core. There is an interface layer between the cores and the coatings in which there are gradients of metal ions in the direction of coating to core. The materials are made by a three stage process involving coprecipitating precursor metal hydroxide core particles at a controlled pH; coprecipitating a different metal hydroxide coating on the particles without controlling the pH; and then calcining the resulting coated precursor particles with lithium hydroxide to form the stabilized lithium metal oxide material.

Lipson, Albert L.↗
DOE OSTI2026

Controlled lithium stripping enables a stable interface for long-cycling anode-free solid-state batteries

Anode-free solid-state batteries (AFSSBs) are a promising route toward achieving high energy density. In these cells, the anode contains no pre-stored lithium (Li). Instead, the entire Li inventory originates from the cathode and is freshly deposited onto a bare current collector during charging. However, achieving uniform and defect-free Li plating on this bare current collector remains a major challenge, often resulting in low Li plating/stripping efficiency and rapid capacity decay. Here, for the first time, operando neutron imaging is employed to visualize Li plating/stripping behavior in an anode-free full cell with LiNi0.82Mn0.07Co0.11O2 (NMC) as the cathode. Operando measurements reveal that complete stripping of Li leaves isolated Li residues on the current collector, which degrades the interfacial contact between the current collector and the solid-state electrolyte. To mitigate this interfacial issue and promote more uniform Li deposition, we implement a discharge-cutoff-voltage strategy that intentionally retains a thin residual Li layer after stripping. This preserved Li-containing interfacial reservoir not only improves interfacial contact but also serves as an in situ formed seed layer that enables more homogeneous subsequent Li plating. As a result, the optimized anode-free cell with limited stripping depth exhibits excellent long-term cycling stability, maintaining a discharge capacity of 112.1 mAh g−1 with a capacity retention of 80.6% and an average coulombic efficiency of approximately 99.9% after 500 cycles at 0.25 C. In contrast, the cell with a conventional discharge cutoff voltage of 2.8 V exhibits rapid capacity decay, retaining only 59.7 mAh g−1 after 50 cycles with a capacity retention of 40.7%. This work demonstrates that limiting deep stripping to preserve a thin Li-containing interfacial layer can effectively improve the cycling stability of sulfide-based AFSSBs.

Wang, Jiwei [Northeastern University, Boston]↗
DOE OSTI2026

Rational Design of Weakly‐Solvating Molecules for Salt‐In‐Pre‐Ionic‐Liquid Electrolytes for Li Metal Batteries

Lithium metal batteries (LMBs) promise step‐changes in energy densities but suffer from poor cycle life due to unstable electrolyte‐lithium interfaces. Conventional carbonate electrolytes exhibit excessive lithium‐ion solvation and low oxidative stability, leading to rapid capacity loss. Herein, we report a rationally designed weakly‐solvating cyclic sulfonamide, 1‐trifluoromethanesulfonyl)amide pyrrolidine (TFMSPyr), which integrates an electron‐withdrawing trifluoromethanesulfonyl functional group at pyrrolidinic‐N. TFMSPyr acts as a pre‐ionic‐liquid solvent that forms intrinsically localized, anion‐dominated solvation, coupling molecular architecture, solvation topology, and transport dynamics. As a result, LiFSI based salt‐in‐pre‐ionic‐liquid (SIPIL) electrolytes exhibit high lithium‐ion transference number, oxidative stability > 5 V versus Li/Li + and anion‐derived solid electrolyte interphases (SEI). Li||Cu cells with SIPIL deliver a first cycle Coulombic efficiency (CE) of ≈ 99% with average CE of 99.2% for 100 cycles, and lithium half‐cells with lithium iron phosphate (LFP) cathode exhibit 82% capacity retention after 400 cycles with CE of 99.98%. In anode‐free full cells, 95% of initial capacity is retained after 63 cycles with an average CE of 99.5%. These results demonstrate that molecular engineering of solvents offers a powerful pathway to stabilize lithium metal interfaces and enable practical Anodeless LMBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Ultrasmooth Epitaxial Pt Thin Films Grown by Pulsed Laser Deposition

Platinum (Pt) thin films are useful in applications requiring high-conductivity electrodes with excellent thermal and chemical stability. Ultrasmooth and epitaxial Pt thin films with single-crystalline domains have the added benefit of providing ideal templates for the subsequent growth of heteroepitaxial structures. Here, we grow epitaxial Pt (111) electrodes (ca. 30 nm thick) on sapphire (α-Al 2 O 3 (0001)) substrates with pulsed laser deposition. This versatile technique allows control of the growth process and fabrication of films with carefully tailored parameters. X-ray scattering, atomic-force microscopy, and electron microscopy provide structural characterization of the films. Various gaseous atmospheres and temperatures were explored to achieve epitaxial growth of films with low roughness. A two-step (500 °C/300 °C) growth process was developed, yielding films with improved epitaxy without compromising roughness. The resulting films possess ultrasmooth interfaces (<3 Å) and high electrical conductivity (6.9 × 10 6 S/m). Finally, Pt films were used as current collectors and templates to grow lithium manganese oxide (LiMn 2 O 4 (111)) epitaxial thin films, a cathode material used in Li-ion batteries. In conclusion, using a solid-state ionogel electrolyte, the films were highly stable when electrochemically cycled in the 3.5-4.3 V vs Li/Li + range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Architecting a Stable High-Energy Aqueous Al-Ion Battery

Aqueous Al-ion batteries (AAIBs) are the subject of great interest due to the inherent safety and high theoretical capacity of aluminum. The high abundancy and easy accessibility of aluminum raw materials further make AAIBs appealing for grid-scale energy storage. However, the passivating oxide film formation and hydrogen side reactions at the aluminum anode as well as limited availability of the cathode lead to low discharge voltage and poor cycling stability. Here, we proposed a new AAIB system consisting of an Al x MnO 2 cathode, a zinc substrate-supported Zn-Al alloy anode, and an Al(OTF) 3 aqueous electrolyte. Through the in situ electrochemical activation of MnO, the cathode was synthesized to incorporate a two-electron reaction, thus enabling its high theoretical capacity. The anode was realized by a simple deposition process of Al 3+ onto Zn foil substrate. The featured alloy interface layer can effectively alleviate the passivation and suppress the dendrite growth, ensuring ultralong-term stable aluminum stripping/plating. The architected cell delivers a record-high discharge voltage plateau near 1.6 V and specific capacity of 460 mAh g -1 for over 80 cycles. Finally, this work provides new opportunities for the development of high-performance and low-cost AAIBs for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2022

Investigation of the Electrode-Electrolyte Interphase in Ester-Based Electrolytes in NCM523/Graphite Cells

The use of methyl acetate (MA) and methyl propionate (MP) as co-solvents in carbonate/LiPF 6 electrolytes have been investigated in LiNi 0.5 Co 0.2 Mn 0.3 O 2 (NCM523)/graphite cells to improve electrochemical performance at low temperature (−20 °C). Consistent with previous investigations, improved low temperature performance was observed with all electrolyte formulations containing esters. Detailed ex situ surface analysis of the surface films generated with the ester-based electrolytes containing electrolyte additives reveal significant changes to the SEI on graphite upon cycling at moderately elevated temperature (45 °C). In the presence of vinylene carbonate (VC) lithium plating is observed upon cycling at low temperature (−20 °C) which leads to a thicker solid electrolyte interface (SEI) upon cycling at 45 °C. Incorporation of fluoroethylene carbonate (FEC) as an electrolyte additive results in the generation of a thin SEI and alters the structure of the surface film on the NCM523 cathode resulting in stable cycling over a wide temperature range.

Rodrigo, Nuwanthi D. (ORCID:0000000343129536)↗
DOE OSTI2024

Densification of Cathode/Electrolyte Interphase to Enhance Reversibility of LiCoO 2 at 4.65 V

For LiCoO 2 (LCO) operated beyond 4.55 V (vs Li/Li + ), it usually suffers from severe surface degradation. Constructing a robust cathode/electrolyte interphase (CEI) is effective to alleviate the above issues, however, the correlated mechanisms still remain vague. Herein, a progressively reinforced CEI is realized via constructing Zr-O deposits (ZrO 2 and Li 2 ZrO 3 ) on LCO surface (i.e., Z-LCO). Upon cycle, these Zr-O deposits can promote the decomposition of LiPF6, and progressively convert to the highly dispersed Zr-O-F species. In particular, the chemical reaction between LiF and Zr-O-F species further leads to the densification of CEI, which greatly reinforces its toughness and conductivity. Further, combining the robust CEI and thin surface rock-salt layer of Z-LCO, several benefits are achieved, including stabilizing the surface lattice oxygen, facilitating the interface Li + transport kinetics, and enhancing the reversibility of O3/H1-3 phase transition, etc. As a result, the Z-LCO||Li cells exhibit a high capacity retention of 84.2% after 1000 cycles in 3–4.65 V, 80.9% after 1500 cycles in 3–4.6 V, and a high rate capacity of 160 mAh g -1 at 16 C (1 C = 200 mA g -1 ). This work provides a new insight for developing advanced LCO cathodes.

25 ENERGY STORAGE↗
DOE OSTI2024

Image-Based Digital Twin for Assessing the Coupled Electro-Chemo-Mechanical Behavior of Li-Ion Batteries

In energy storage materials, strong electrochemical-mechanical coupling and highly anisotropic material properties contribute to the formation and propagation of micro-cracking during charge/discharge cycling, resulting in reduced performance and service life. In this work, a digital twin is created to investigate the performance of a Li-ion battery cathode and simulate degradation accumulation. Pixel-based model construction is used to represent the complex material geometries from microstructural images supplied by the National Renewable Energy Laboratory (NREL). Because of the expected large deformation and crack opening, the reproducing kernel particle method (RKPM), a meshfree method with discretization at the image pixels, is used to approximate the field variables: electrostatic potential, concentration, and displacement. An interface modified reproducing kernel (IM-RK) is constructed by scaling a smooth kernel function with an interface-distance function to achieve strategic discontinuity types (i.e. weak discontinuities for strain discontinuities and strong discontinuities for cracks) and alleviate Gibbs oscillations near these transition zones. The discrete nature of the images' pixel points is employed throughout the model and approximation construction. The mechanical model is verified using an image-based microstructure under tensile loading. A transient electro-chemo-mechanical coupled simulation is performed to evaluate the potential micro-cracking induced degradation of the battery cathode material subjected to charge/discharge cycling.

battery degradation↗
DOE OSTI2020

Tailoring a Three-Phase Microenvironment for High-Performance Oxygen Reduction Reaction in Proton Exchange Membrane Fuel Cells

Despite tremendous progress in catalyst development for rate-limiting cathodic oxygen reduction reaction (ORR), reducing Pt usage while meeting performance requirements in practical proton exchange membrane fuel cells (PEMFCs) remains a challenge. The ORR in PEMFCs occurs at a catalyst–electrolyte–gas three-phase interface. A desirable interface should exhibit highly active and available catalytic sites, as well as allow efficient oxygen and proton feeding to the catalytic sites and timely removal of water to avoid interface flooding. In this work, we report the design of a three-phase microenvironment in PEFMCs, showing that carbon surface chemistry can be tuned to modulate its interaction with the ionomers and create favorable transport paths for rapid delivery of both reactants and products. With such an elaborate interfacial design, for the first time we have demonstrated PEMFCs with all key ORR catalyst performance metrics, including mass activity, rated power, and durability, surpassing the US Department of Energy targets.

25 ENERGY STORAGE↗
DOE OSTI2022

Spontaneous Lithiation of Binary Oxides during Epitaxial Growth on LiCoO 2

Epitaxial growth is a powerful tool for synthesizing heterostructures and integrating multiple functionalities. Interfacial mixing can readily occur at temperatures required for complete film crystallization and can significantly modify the properties of layered structures, particularly for those containing energy storage materials with smaller cations. Here we show a two-step sequence involving the growth of an epitaxial LiCoO 2 cathode layer followed by the deposition of a binary transition metal oxide (WO 3 , TiO 2 , and others) in which controlled lithiation of the binary oxide occurs. Orientation-controlled epitaxial synthesis of the model solid-state-electrolyte Li 2 WO 4 and model anode material Li 4 Ti 5 O 12 occurs as WO 3 and TiO 2 nucleate their respective host lattices and attract Li ions from the underlying cathode. The cathode layer readily provides a tunable amount of Li ions for the controlled lithiation of the subsequent layer. We demonstrate that this approach can be used for energy materials discovery and exploring different combinations of epitaxial interfaces that can serve as well-defined model systems for mechanistic studies of energy storage and conversion processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Solvation, Rational Design, and Interfaces: Development of Divalent Electrolytes

Rechargeable multivalent ion batteries are promising tools to complement current lithium-ion batteries for a future of diverse energy storage needs. Divalent Mg and Ca are attractive candidates for their high crustal abundance, high volumetric anode capacity, and infrequent dendrite formation during electrochemical cycling. Electrolyte research is central to these efforts and continually improves coulombic efficiencies towards the ideal 100%. This mini-review discusses recent work towards fundamental understandings that push these chemistries towards practical use. Piecing together compatible cathode and electrolytes for a complete practical multivalent ion battery lacks a cohesive method for further development and refinement. Understanding liquid solvation, utilizing rational design, and probing interfacial interactions are focal points that govern electrolyte performance. The combination of these areas will be critical for meaningful development.

25 ENERGY STORAGE↗
DOE OSTI2022

Operating High-Energy Lithium-Metal Pouch Cells with Reduced Stack Pressure Through a Rational Lithium-Host Design

Transitioning from a liquid electrolyte to an inorganic solid electrolyte offers a potential pathway to enable highly reversible lithium-metal anodes. However, the solid-electrolyte-protected lithium-metal anode suffers from poor interfacial ionic contacts and requires an impractically high stack pressure (>1.0 MPa) to maintain the interfacial contacts. It is demonstrated here that combining a hollow silver/carbon fiber scaffold and an inorganic/organic composite electrolyte enables a highly reversible lithium-metal anode. Since the high surface area of the electrode provides intimate contact and the hollow structure of the electrode relieves the lithium plating-induced stress, the electrode/electrolyte interface remains stable during cycling even under mild stack pressure. This unconventional structural design is validated in practical pouch cells assembled with the 3D lithium host containing a onefold excess of lithium and a high-nickel cathode. At a mild stack pressure of 320 kPa, the pouch cell displays 83% capacity retention for 200 cycles. This work illustrates that combining a hollow electrode architecture and a robust solid electrolyte offers a practical pathway toward rechargeable lithium-metal anodes.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Designing better electrolytes

Electrolytes and the associated interphases constitute the critical components to support the emerging battery chemistries that promise tantalizing energy but involve drastic phase and structure complications. Designing better electrolytes and interphases holds the key to the success of these batteries. As the only component that interfaces with every other component in the device, an electrolyte must satisfy multiple criteria simultaneously. These include transporting ions while insulating electrons between the electrodes and maintaining stability against electrodes of extreme chemical natures: the strongly oxidative cathode and the strongly reductive anode. In most advanced batteries, the two electrodes operate at potentials far beyond the thermodynamic stability limits of electrolytes, so the stability therein has to be realized kinetically through an interphase formed from the sacrificial reactions between electrolyte and electrodes.

Meng, Y. Shirley↗
DOE OSTI2023

Enabling selective zinc-ion intercalation by a eutectic electrolyte for practical anodeless zinc batteries

Abstract Two major challenges hinder the advance of aqueous zinc metal batteries for sustainable stationary storage: (1) achieving predominant Zn-ion (de)intercalation at the oxide cathode by suppressing adventitious proton co-intercalation and dissolution, and (2) simultaneously overcoming Zn dendrite growth at the anode that triggers parasitic electrolyte reactions. Here, we reveal the competition between Zn 2+ vs proton intercalation chemistry of a typical oxide cathode using ex-situ/ operando techniques, and alleviate side reactions by developing a cost-effective and non-flammable hybrid eutectic electrolyte. A fully hydrated Zn 2+ solvation structure facilitates fast charge transfer at the solid/electrolyte interface, enabling dendrite-free Zn plating/stripping with a remarkably high average coulombic efficiency of 99.8% at commercially relevant areal capacities of 4 mAh cm −2 and function up to 1600 h at 8 mAh cm −2 . By concurrently stabilizing Zn redox at both electrodes, we achieve a new benchmark in Zn-ion battery performance of 4 mAh cm −2 anode-free cells that retain 85% capacity over 100 cycles at 25 °C. Using this eutectic-design electrolyte, Zn | |Iodine full cells are further realized with 86% capacity retention over 2500 cycles. The approach represents a new avenue for long-duration energy storage.

25 ENERGY STORAGE↗
DOE OSTI2023

Meshfree Multiphysics Damage Modeling of Li-ion Battery Materials

Through repeated charging and discharging cycles, the electrodes of a Li-ion battery experience significant swelling and contraction due to the movement of lithium, also known as intercalation. This research focuses specifically on the chemo-mechanical cracking in the cathode. Because cathode particles are comprised of many randomly-oriented grains, which have highly anisotropic material properties, the expansion and contraction is very non-uniform. As a result, stress concentrations tend to form between grains, which necessitates the modeling of crack propagation largely along grain boundaries and material interfaces. Chemo-mechanical damage models are generally simulated by one of two methods: the cohesive zone model (CZM) and the continuous damage model (CDM). The CZM is more accurate at capturing the sharp discontinuities of a crack but is very computationally expensive and intractable for large-scale models as a result. Conversely, the CDM is easily computed but not well-suited to easily allow for discontinuous field variables, which are inherent across a crack. This study aims to improve the CDM's ability to capture discontinuous cracks. Current versions of the CDM use the finite element method (FEM), which is one of the most widely used approaches for spatial discretization. This research investigates the use of the Reproducing Kernel Particle Method (RKPM), a meshfree method, for spatial discretization and aims to achieve a coupled chemo-mechanical crack propagation model that enhances accuracy while maintaining high computational efficiency. This model features a fully coupled, iterative electrochemistry solution, which informs the meshfree damage model of impending crack formation. To gain a better understanding of how the meshfree model compares to the current FEM model in capturing cathode crack propagation, further investigation is needed.

damage modeling↗