Search NASA⌕ Search

SEARCH · Search NASA

Results for “ceria”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

323 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Effect of redox promoters (CeO x and CuO x ) and surface sulfates on the selective catalytic reduction (SCR) of NO with NH 3 by supported V 2 O 5 -WO 3 /TiO 2 catalysts

A series of TiO 2 -supported MO x catalysts (M=V, W, Ce, Cu and S) were investigated for their SCR activity. In situ Raman spectroscopy indicated that the supported MO x phases were completely dispersed as surface sites on the TiO 2 support. In situ IR revealed that surface VO x , WO x and SO x sites anchored at both CeO x /CuO x and TiO 2 sites. The number of surface Lewis acid sites decreased with the addition of basic (CeO x /CuO x ) and acidic (VO x /WO x ) sites in all catalysts, and acidic SO x in the unpromoted and Ce-promoted catalysts. The surface VO x , WO x and SO x sites introduced surface Brønsted acid sites. The redox promoters increased the NO conversion, but SO x impregnation inhibited their effect due to acid (SO x )-base (CeO x /CuO x ) interactions. Finally, the SCR reaction was shown to efficiently proceed via either surface NH 3 * or NH 4 +* species, resolving the long-standing dispute on the involvement of these species in the SCR reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Controlling the Reconstruction of Ni/CeO 2 Catalyst during Reduction for Enhanced CO Methanation

Reductive pretreatment is an important step for activating supported metal catalysts but has received little attention. In this study, reconstruction of the supported nickel catalyst was found to be sensitive to pretreatment conditions. In contrast to the traditional activation procedure in hydrogen, activating the catalyst in syngas created supported Ni nanoparticles with a polycrystalline structure containing an abundance of grain boundaries. The unique post-activation catalyst structure offered enhanced CO adsorption and an improved CO methanation rate. The current strategy to tune the catalyst structure via manipulating the activation conditions can potentially guide the rational design of other supported metal catalysts.

42 ENGINEERING↗
DOE OSTI2022

Dependency of CO 2 methanation on the strong metal-support interaction for supported Ni/CeO 2 catalysts

The strong metal-support interaction (SMSI) for supported Ni/CeO 2 catalysts with different CeO 2 nanomorphologies was systematically explored. The degree of encapsulation of Ni particles originating from the SMSI effect was found to follow the trend of Ni/CeO 2 -(1 1 1) > Ni/CeO 2 -(1 0 0) > Ni/CeO 2 -(110 + 100), which parallels the CO 2 hydrogenation activity. Quasi in situ XPS reveals the presence of Ce 3+ sites in accordance with the formation of an amorphous surface CeOx layer encapsulating the Ni nanoparticles. In situ DRIFTS indicates the reaction pathway and rate-determining step are dependent on the degree of the SMSI effect, leading to distinct selectivities towards CH 4 , especially at a high weight hourly space velocity (WHSV). Finally, these findings present a fundamental strategy about tailoring catalytic performance through support facet dependent susceptibility of SMSI phenomena.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Adsorption and activation of CO 2 on Pt/CeOx/TiO 2 (110): Role of the Pt-CeO x interface

The adsorption and dissociation of CO 2 on TiO 2 (110), CeO x /TiO 2 (110) and Pt/CeO x /TiO 2 (110) surfaces has been examined using Ambient Pressure X-ray Photoelectron Spectroscopy (AP-XPS). The substrates under study exhibited different degrees of complexity which were tested for the binding of the adsorbate and the cleavage of C-O bonds. The surfaces were prepared by depositing CeO x (0.1 ML) onto TiO 2 (110) to form a mixed oxide support, onto which Pt nanoparticles (0.2 ML) were deposited. This configuration yields a complex set of interfaces between metal and oxides and we have systematically titrated the active role of each component (Pt 4f, Ce 3d and Ti 2p regions) and the arising surface intermediates (C 1s and O 1s regions). CO 2 barely bonds to stoichiometric TiO 2 (110). It heals oxygen vacancies of this oxide surface (CO 2,gas → CO gas + O a ) and does not form stable carbonates. A stable carbonate was seen upon adsorption of CO 2 on CeO x /TiO 2 (110) and on this type of substrate the adsorbate also removed O vacancies leading to the oxidation of Ti 3+ and Ce 3+ sites. Pt nanoparticles dispersed on CeO x /TiO 2 (110) were highly effective for the binding and dissociation of CO 2 , with the formation of CO 3 , CO, C and CH x species on the Pt/CeO x /TiO 2 (110) system. The results of theoretical calculations based on density-functional theory (DFT) show that Pt/CeOx/TiO2(110) binds CO2 much stronger than surfaces of bulk platinum {(111), (100), (110)} or other late transition metals. On a Pt-CeO x interface, the molecule adsorbs with a bent configuration (~ 130° O-C-O bond angle) and with a substantial elongation (~ 0.1 Å) of the C-O bonds, facilitating its transformation into high value chemicals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Hydroxyls on CeO 2 Support Promoting CuO/CeO 2 Catalyst for Efficient CO Oxidation and NO Reduction by CO

Transition metal catalysts, such as copper oxide, are more attractive alternatives to noble metal catalysts for emission control due to their higher abundance, lower cost, and excellent catalytic activity. Here, in this study, we report the preparation and application of a novel CuO/CeO 2 catalyst using a hydroxyl-rich Ce(OH) x support for CO oxidation and NO reduction by CO. Compared to the catalyst prepared from a regular CeO 2 support, the new CuO/CeO 2 catalyst prepared from the OH-rich Ce(OH) x (CuO/CeO 2 –OH) showed significantly higher catalytic activity under different testing conditions. The effect of OH species in the CeO 2 support on the catalytic performance and physicochemical properties of the CuO/CeO 2 catalyst was characterized in detail. It is demonstrated that the abundant OH species enhanced the CuO x dispersion on CeO 2 , increased the CuO x –CeO 2 interfaces and surface defects, promoted the oxygen activation and mobility, and boosted the NO adsorption and dissociation on CuO/CeO 2 –OH, thus contributing to its superior catalytic activity for both CO oxidation and NO reduction by CO. These results suggest that the OH-rich Ce(OH) x is a superior support for the preparation of highly efficient metal catalysts for different applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Stable and Catalytically Active Shape-Engineered Cerium Oxide Nanorods by Controlled Doping of Aluminum Cations

Shape-engineered nanocrystals (SENs) promise a better selectivity and a higher activity in catalytic reactions than the corresponding non-shape-engineered ones because of their larger specific surface areas and desirable crystal facets. However, often, it is challenging to apply SENs in practical catalytic applications at high reaction temperatures, where SENs deforms into more stable, less active nanoparticles. In this paper, we show that atomic layer deposition (ALD) of Al 2 O 3 at 200 °C can controllably dope Al cations into the shape-engineered CeO 2 nanorods (NRs) to not only increase their shape transition temperature from 400 °C to beyond 700 °C but also greatly increase their specific reversible oxygen storage capacity (srOSC). Furthermore, the substituted Al3+ ions impede the surface diffusion of Ce ions and therefore improve the thermal stability of CeO 2 NRs. These Al3+ dopants form -Al–O–Ce–O– clusters, which are new Ce species and can be reversibly reduced and oxidized at 500–700 °C. This low-temperature chemical doping method decouples the synthesis process of SENs from the doping process and maintains the shape of the SENs during the activation of dopants. This concept could be adopted to enable the applications of other SENs in challenging high-temperature environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Facile Interfacial Reduction Suppresses Redox Chemical Expansion and Promotes the Polaronic to Ionic Transition in Mixed Conducting (Pr,Ce)O 2−δ Nanoparticles

Mixed ionic/electronic conductors (MIECs) are essential components of solid-state electrochemical devices, such as solid oxide fuel/electrolysis cells. For efficient performance, MIECs are typically nanostructured, to enhance the reaction kinetics. However, the effect of nanostructuring on MIEC chemo-mechanical coupling and transport properties, which also impact cell durability and efficiency, has not yet been well understood. Here, in this work, Pr 0.2 Ce 0.8 O 2−δ (PCO20) nanopowders were prepared by coprecipitation, then sintered in a modified dilatometer at three different temperatures (600, 725, and 850 °C) for microstructure evolution, resulting in three samples with different average particle sizes (23, 30, and 53 nm). The chemical strain and electronic/ionic conductivity were then measured simultaneously on stable nanostructures in four isotherms from 550 to 400 °C with steps in pO 2 (1 to 10 –4 atm O 2 ). A microcrystalline bar was prepared and measured for comparison. Particle size reduction led to a monotonically decreasing isothermal redox chemical strain, confirmed by in situ high-temperature, controlled-atmosphere XRD measurements. The corresponding conductivity measurements provided defect chemical insight into the particle size-dependent chemical expansion behavior. The significant weakening of the pO 2 dependence and decreased activation energy for electrical conduction with decreasing particle size indicated a decrease in the reduction enthalpy of PCO, shifting the transition from (Pr) polaronic to ionic behavior to higher pO 2 . STEM-EELS measurements confirmed the majority of Pr was reduced to 3+ in the nanoparticles, while Ce remained 4+. These results demonstrate suppression of deleterious chemical expansion and tailoring of the dominant charge carrier simply through controlling the particle size, providing insights for MIEC microstructural design.

ceria↗
DOE OSTI2021

Mechanistic Understanding of Methane Combustion over Ni/CeO 2 : A Combined Experimental and Theoretical Approach

Catalytic oxidation of methane (CH 4 ) over nonprecious Ni/CeO 2 catalysts has received a lot of attention due to the large natural gas reserves found in North America and the prohibitive cost of palladium-based catalysts, commonly used for CH 4 oxidation. However, the catalytic mechanism of CH 4 oxidation over Ni/CeO 2 still remains unclear. Moreover, the parameters affecting the reaction rates, the interaction between nickel and CeO 2 , and the reaction intermediates are still not well understood. In this study, kinetic model fitting, CH 4 temperature-programmed reduction-mass spectroscopy (CH 4 TPR-MS), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and density functional theory (DFT) calculations were combined to elucidate the mechanism of complete oxidation of CH 4 over Ni/CeO 2 . CH 4 TPR-MS showed that the complete oxidation of CH 4 over Ni/CeO 2 requires 55–120 °C lower compared to bare CeO 2 or Ni/quartz sand; complete oxidation of CH 4 took place when the surface oxygen species were abundant, while partial oxidation products (CO, H 2 ) were formed when the oxygen species were depleted. In situ DRIFTS showed that CH 3 , CH 2 , CO, and CO 2 were formed after CH 4 activation over Ni/CeO 2 , while CH 3 O species were not observed. Combining those findings with kinetic model fitting, a redox Mars–van Krevelen (MvK) mechanism showed the best description of the experimental observations. The MvK mechanism involves the reaction of dissociated oxygen species with gas-phase CH 4 while water inhibits the reaction rate by adsorbing on the oxidized sites. Moreover, CH 4 activation leads to the reduction of the active sites and oxygen vacancy formation followed by reoxidation of the active sites by gas-phase O 2 . A CH 4 oxidation reaction pathway over Ni/CeO 2 is proposed by DFT calculations. In summary, the findings shown here suggest that CH 4 oxidation over Ni/CeO 2 follows a redox MvK mechanism and provides guidance for the rational design of non-precious-metal catalysts for CH 4 oxidation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Atomic Structural Origin of the High Methanol Selectivity over In 2 O 3 –Metal Interfaces: Metal–Support Interactions and the Formation of a InO x Overlayer in Ru/In 2 O 3 Catalysts during CO 2 Hydrogenation

CO 2 hydrogenation to methanol is of great environmental and economic interest due to its potential to reduce carbon emissions and produce valuable chemicals in one single reaction. Compared with the unmodified traditional Cu/ZnO/Al 2 O 3 catalyst, an indium oxide (In 2 O 3 )-based catalyst can double the methanol selectivity from 30–50 to 60–100%. It is worth noting that over catalysts involving various active metals dispersed on indium oxide (M/In 2 O 3 , M = Pd, Ni, Au, etc.), although the methanol yield is boosted, the selectivity remains similar to that of plain In 2 O 3 despite the distinct chemical properties of the added metals. Here, to investigate the phenomena behind this behavior, we used RuO 2 /In 2 O 3 as a test catalyst. The results of ambient pressure photoelectron spectroscopy, in situ X-ray absorption fine structure, and time-resolved X-ray diffraction indicate that the structure of the RuO 2 /In 2 O 3 catalyst is highly dynamic in the presence of a reactive environment. Specifically, under CO 2 hydrogenation conditions, Ru clusters facilitate the reduction of In 2 O 3 to generate In 2 O 3–x aggregates, which encapsulate the Ru systems in a migration driven by thermodynamics. In this way, the Ru O sites for CH 4 production are blocked while creating RuO x –In 2 O 3–x interfacial sites with tunable metal–oxide interactions for selective methanol production. In an inverse oxide/metal configuration, indium oxide has properties not seen in its bulk phase that are useful for the binding and conversion of CO 2 . This work reveals the dynamic nature of In 2 O 3 -based catalysts, providing insights for a rational design of materials for the selective synthesis of methanol.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Elucidation of Ce/Zr ratio effects on the physical properties and catalytic performance of CuO x /Ce y Zr 1− y O 2 catalysts

Although cerium oxide (CeO 2 ) is widely used as a catalyst support, its limited defect sites and surface oxygen vacancy/mobility should be improved. The incorporation of zirconium (Zr) in the cerium (Ce) lattice is shown to increase the number of oxygen vacancies and improve catalytic activity. Using a fixed surface density (SD) of copper (∼2.3 Cu atoms per nm 2 ) as a surface species, the role of the support (Ce y Zr 1−y O 2 (y = 1.0, 0.9, 0.6, 0.5, and 0.0)) and defect site effects in the CO oxidation reaction was investigated. Spectroscopic (e.g., Raman, XRD, XPS) and microscopic (e.g., SEM-EDX, HR-TEM) characterization techniques were applied to evaluate the defect sites, crystallite size, lattice parameters, chemical composition, oxidation states of elements and microstructure of the catalysts. Here, the CO oxidation reaction with varied CO : O 2 ratios (1 : 5, 1 : 1, and 1 : 0.5 (stoichiometric)) was used as a model reaction to describe the relationship between the structure and the catalytic performance of each catalyst. Based on the characterization results of Ce y Zr 1−y O 2 materials, the addition of Zr causes physical and chemical changes to the overall material. The inclusion of Zr into the structure of CeO 2 decreased the overall lattice parameter of the catalyst and increased the number of defect sites. The prepared catalysts were able to reach complete CO conversion (∼100%) at low temperature conditions (<200 °C), each showing varied reaction activity. The difference in CO oxidation activity was then analyzed and related to the structure, wherein Cu loading, surface oxygen vacancies, reduction–oxidation ability, CuO x –support interaction and oxygen mobility in the catalyst were the crucial descriptors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fermi surface topology and nontrivial Berry phase in the flat-band semimetal Pd 3 Pb

A study of the Fermi surface of the putative topological semimetal Pd 3 Pb has been carried out using Shubnikov–de Haas (SdH) oscillations measured in fields of up to 60 T. Pd 3 Pb has garnered attention in the community due to a peculiar Fermi surface that has been proposed theoretically by Ahn, Pickett, and Lee, Phys. Rev. B 98 , 035130 (2018) to host a dispersionless band along X - Γ as well as multiple triply degenerate band crossings that, under the influence of spin-orbit coupling, lead to ten fourfold degenerate Dirac points. Analysis of the SdH oscillation data verifies the calculated multisheet Fermi surface, revealing a Γ centered spheroid that had not been resolved experimentally in prior studies. A comprehensive, angle-dependent analysis of the phase of the SdH oscillations convincingly demonstrates a nontrivial Berry phase for two bands along Γ - R , supporting the theoretical predictions, while simultaneously evidencing interference between extremal orbits that mimics a trivial Berry phase at intermediate angles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

(U) PRAD0697 & PRAD0698: Complex Loading of CeO₂ Powder

Cerium(IV) oxide (CeO₂) powder is shock compressed using the Precision High Energy-density Liner Implosion eXperiment (PHELIX) platform. Experimental results are compared against several modeling approaches. Compaction behavior is best captured with a P-∝ model, which calculates CeO₂ powder bulk densities within 80-99% of experimental values but overpredicts densi cation at the cylindrical target's outer radius and center by up to 20%. Preliminary calculations suggest that accuracy could be increased with the inclusion of a coupled strength model. Several common computational modeling approaches for the shock compression response of granular materials and the magnetohydrodynamic (MHD) force upon the impactor/liner in pulsed power compression experiments are investigated and analyzed for their validity. The Bi-linear Ramp, P-∝ PACXP, and P-∝ Menikoff-Kober continuum compaction models are calibrated to planar impact Hugoniot data for CeO₂ powder and used to predict the powder's shock compaction response under non-planar shock wave compression. MHD calculations of the PHELIX pulsed power driver are performed using an idealized resistor-inductor-capacitor (RLC) circuit calibrated to previous experiments. All simulations are performed using the LANL code FLAG. Two validation experiments are computationally designed using the calibrated compaction and circuit models, executed using the PHELIX platform on CeO₂ targets with initial porous densities of 3.95 and 4.03 g/cm³, measured with proton radiography, and analyzed against the model predictions. The two P-∝ models more accurately describe CeO₂ powder densi cation than the Bi-linear Ramp model. However, the two P-∝ models overpredict bulk density of the shock compressed CeO₂ powder by up to 20% when the appropriate impact velocities are applied. MHD calculations for both validation experiments underpredict liner impact velocities by 4-11% when using the idealized RLC circuit model calibrated to previous experiments. Compensating underpredictions of impact velocity and overpredictions of powder densication lead to a false accuracy in pre-shot calculations compared to experimental data. To improve correlation between simulations and experiments, the following improvements are suggested: 1. A coupled strength model for CeO₂ powder that updates strength as a function of porosity and applied stress. 2. An improved MHD circuit model that more accurately captures the PHELIX machine.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High Pressure Brillouin Spectroscopy and X-ray Diffraction of Cerium Dioxide

Simultaneous high-pressure Brillouin spectroscopy and powder X-ray diffraction of cerium dioxide powders are presented at room temperature to a pressure of 45 GPa. Micro- and nanocrystalline powders are studied and the density, acoustic velocities and elastic moduli determined. In contrast to recent reports of anomalous compressibility and strength in nanocrystalline cerium dioxide, the acoustic velocities are found to be insensitive to grain size and enhanced strength is not observed in nanocrystalline CeO 2 . Discrepancies in the bulk moduli derived from Brillouin and powder X-ray diffraction studies suggest that the properties of CeO 2 are sensitive to the hydrostaticity of its environment. Our Brillouin data give the shear modulus, G 0 = 63 (3) GPa, and adiabatic bulk modulus, K S0 = 142 (9) GPa, which is considerably lower than the isothermal bulk modulus, K T0 ~ 230 GPa, determined by high-pressure X-ray diffraction experiments.

36 MATERIALS SCIENCE↗