Search NASA⌕ Search

SEARCH · Search NASA

Results for “circulation model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Mechanistic Modeling of TEG Dehydrator Emissions in Oil and Gas Industry

This work presents a mechanistic modeling approach for simulating methane emissions from triethylene glycol (TEG) dehydrators used in oil & gas (O&G) operations. The model was developed as a modular component of the Mechanistic Air Emissions Simulator (MAES) tool, incorporating species-specific absorption and emission dynamics through two-level, second-order polynomial regression (PR) models trained on ProMax simulation data: (1) species-level regression models that track the transfer rates of individual gas species within the dehydrator unit streams, and (2) outlet flow stream regression models that predict the fraction of inlet gas distributed among the outlet streams of the dehydrator unit. These behaviors were characterized over a range of glycol circulation ratios, wet gas pressures, and temperatures. The model was validated using root mean square error (RMSE) analysis. The species-level PR achieved low root mean square error (RMSE) values (<0.03) for light hydrocarbon species across all dehydrator components, ranging from 0.0009 for methane to 0.029 for normal pentane. Similarly, the outlet-level PR yielded RMSE values below 0.002 for the dry gas fraction, 0.001 for the flash tank fraction, and 0.002 for the still vent fraction, demonstrating strong agreement between predicted and reference ProMax values. When deployed at field facilities, the model significantly improved MAES-simulated dehydrator emissions, revealing that gas-assisted glycol pump emissions are the dominant contributors to both dehydrator-level and site-level methane emissions under uncontrolled conditions. Further analysis of the 154 dehydrator units reported by operators under the AMI 2024 project showed that 54 units (31%) used gas-driven glycol pumps, of which 6 units (11%) operated with uncontrolled flash tanks, and 22 units (40.7%) were identified as potentially oversized. Of the six dehydrator units with uncontrolled gas-assisted pumps, pump emissions accounted for 90.25% of total dehydrator emissions and 63.10% of total site-level emissions. These findings highlight substantial opportunities for emissions mitigation through equipment upgrades.

MAES↗

Dichotomy between freshwater and heat flux effects on oceanic conveyor belt stability and global climate

The Atlantic meridional overturning circulation is an important global-scale oceanic circulation, and its changes may be responsible for past abrupt climate change events. By using two versions of a coupled climate model, here we show that the stability of this circulation depends not only on the background climate, but also on the type of primary external forcing: freshwater vs. greenhouse gases. When freshwater forcing is dominant, hysteresis of this circulation (an abrupt collapse/reactivation) becomes possible only under simulated glacial conditions with closed Bering Strait. Under present day and future conditions, both freshwater and greenhouse gas forcings could collapse this circulation, but only greenhouse gas forcing produced a bi-stable equilibrium state comparable to abrupt climate change. Our results demonstrate that the Bering Strait status (open vs. closed) may facilitate or prohibit the existence of this circulation’s hysteresis, irrespective of the background climate conditions, but is directly related to the primary forcing.

54 ENVIRONMENTAL SCIENCES↗

Increased Asian Sulfate Aerosol Emissions Remarkably Enhance Sahel Summer Precipitation

Observational evidence shows that Sahel summer precipitation has experienced a considerable increase since the 1980s, coinciding with significant diverging trends of increased sulfate emissions in Asia and decreased emissions in Europe (dipole pattern of aerosols between Asia and Europe). The decrease in European sulfate aerosols has substantial effects on the Sahel summer precipitation increase, but the corresponding effect of increased Asian sulfate is unknown. Multi-model simulations in the Precipitation Driver and Response Model Intercomparison Project (PDRMIP) show, compared to decreased European aerosols, that increased Asian aerosols similarly enhance the Sahel summer precipitation but with different large-scale atmospheric circulation changes. Further analysis of the Sixth Coupled Model Intercomparison Project (CMIP6) simulations under historical attribution and various emission scenarios reinforces the results about the climate impacts of anthropogenic aerosols and suggests that in future scenarios with strong international cooperation and rapid climate mitigations (SSP2-45), the Sahel drought will be intensified likely due to the decline in Asian aerosol emissions. Our results suggest that Asian anthropogenic aerosols are likely a non-negligible driver of the recent recovery in Sahel precipitation amounts

54 ENVIRONMENTAL SCIENCES↗

Impact of Tropical Cyclone Wind Forcing on the Global Climate in a Fully Coupled Climate Model

Tropical cyclones (TCs) alter upper-ocean temperature and influence ocean heat content via enhanced turbulent mixing. A better understanding of the role of TCs within the climate system requires a fully coupled modeling framework, where TC-induced ocean responses feed back to the atmosphere and subsequently to the climate mean state and variability. Here, we investigate the impacts of TC wind forcing on the global ocean and the associated feedbacks within the climate system using the fully coupled Community Earth System Model version 1.3 (CESM1.3). Using the low-resolution version of CESM1.3 (1° atmosphere and ocean grid spacing) with no intrinsic TCs, we conduct a suite of sensitivity experiments by inserting TC winds extracted from a high-resolution (0.25° atmosphere grid spacing) TC-permitting simulation into the low-resolution model. Results from the low-resolution TC experiment are compared to a low-resolution control simulation to diagnose TCs’ impact. We found that the added TC winds can increase ocean heat content by affecting ocean vertical mixing, air–sea enthalpy fluxes, and cloud amount. Here, the added TCs can influence mean SST, precipitation, ocean subsurface temperature, and ocean mixed layer depth. We found a strengthening of the wind-driven subtropical cells and a weakening of the Atlantic meridional overturning circulation due to the changes of surface buoyancy fluxes. TCs in the model cause anomalous equatorward ocean heat convergence in the deep tropics and an increase of poleward ocean heat transport out of the subtropics. Our modeling results provide new insights into the multiscale interactions between TCs and the coupled climate system.

54 ENVIRONMENTAL SCIENCES↗

The Role of Bedrock Circulation Depth and Porosity in Mountain Streamflow Response to Prolonged Drought

Quantitative understanding is lacking on how the depth of active groundwater circulation in bedrock affects mountain streamflow response to a multi-year drought. We use an integrated hydrological model to explore the sensitivity of a variety of streamflow metrics to bedrock circulation depth and porosity under a plausible extreme drought scenario lasting up to 5 years. Endmember depth versus hydraulic conductivity relationships and porosity values for fractured crystalline rock are simulated. With drought, a deeper circulation system with higher drainable porosity more effectively buffers minimum flow and significantly limits perennial stream loss in comparison to a shallow circulation system. Streamflow buffering is accomplished through extensive groundwater storage loss. However, deeper circulation systems experience prolonged recovery from drought in comparison to storage-limited shallow systems. Research highlights the importance of characterizing the deeper bedrock hydrogeology in mountainous watersheds to better understand and predict drought impacts on stream ecosystem health and water resource sustainability.

54 ENVIRONMENTAL SCIENCES↗

Dynamics of Downdrafts Around a Growing Convective Cloud: A Numerical Study

We examine the dynamics of cloud-edge downdrafts over the growth phase of isolated cumuli, combining Eulerian and Lagrangian analyses. As in previous studies, our results show that growing cumuli are surrounded by downdrafts linked to cloud-scale quasi-toroidal circulations at all times at middle and upper cloud levels consistent with the thermal chain description of convective clouds. These toroidal circulations are responsible for the most intense cloud-edge downdrafts in our simulations. In the upper cloud half, roughly 30%–50% of the upward mass flux is typically compensated within a radius of about twice the updraft radius in quasi-laminar simulations forced by a warm bubble in an initially quiescent flow. In a turbulent cloud forced by surface fluxes, this compensation fraction is around 10%–30% over the same region. In contrast to the buoyancy-centered view of subsiding shells, Eulerian and Lagrangian vertical momentum budget analyses show that the most intense cloud-edge downdrafts in the turbulent setup, and after spin-up of the toroidal circulation in the quasi-laminar experiments, are predominantly mechanically forced (i.e., driven by dynamic pressure accelerations). This is consistent throughout the entire growth phase of the cumulus clouds and across tests with varying assumptions, including drier and moister environments. Despite dynamic pressure perturbations being the main driver of toroidal downdrafts, the downdraft speed (relative to the corresponding updraft velocity) exceeds the prediction of the non-buoyant Hill's spherical vortex—a simple model frequently used for cloud-scale circulations—by more than 30%.

Pardo, Lianet Hernández [Goethe Univ., Frankfurt (↗

Revisiting the Role of Ocean Circulation Changes in Polar Ocean Heat Transport Anomalies under Global Warming

In response to greenhouse gas forcing, climate models predict that poleward ocean heat transport (OHT) weakens in the Southern Ocean but increases in the Arctic. The role of ocean circulation changes in this OHT response has been evaluated by decomposing OHT anomalies into a dynamic component (holding ocean temperature fixed while circulation evolves) and a thermodynamic component (holding ocean circulation fixed while temperature evolves). However, ocean temperature changes are themselves shaped by circulation changes through redistribution of the existing heat reservoir and subsequent effects on air–sea heat fluxes. The thermodynamic component can therefore be influenced by circulation changes, making the standard thermodynamic–dynamic decomposition incomplete for isolating the role of circulation changes in OHT anomalies. To address this issue, we use a passive–active decomposition to assess the relative contributions of ocean circulation and passive ocean temperature changes to polar OHT anomalies in a fully coupled climate model. Passive temperature changes are defined as those thermally forced by the atmosphere in the absence of circulation changes. In this passive–active decomposition, an advective term involving both circulation and passive temperature changes remains ambiguous—classifying it as active implies circulation changes dominate Southern Ocean OHT anomalies, whereas classifying it as passive implies temperature changes dominate. However, both interpretations imply that ocean circulation changes have a much weaker effect on polar OHT anomalies than inferred from the standard decomposition. In conclusion, these results help reconcile conclusions from studies using the standard decomposition with those using passive tracer methods to assess the role of circulation changes in polar OHT anomalies.

Arctic↗

Modeling regional precipitation over the Indus River basin of Pakistan using statistical downscaling

Complex processes govern spatiotemporal distribution of precipitation within the high-mountainous headwater regions (commonly known as the upper Indus basin (UIB)), of the Indus River basin of Pakistan. Reliable precipitation simulations particularly over the UIB present a major scientific challenge due to regional complexity and inadequate observational coverage. Here, we present a statistical downscaling approach to model observed precipitation of the entire Indus basin, with a focus on UIB within available data constraints. Taking advantage of recent high altitude (HA) observatories, we perform precipitation regionalization using K-means cluster analysis to demonstrate effectiveness of low-altitude stations to provide useful precipitation inferences over more uncertain and hydrologically important HA of the UIB. We further employ generalized linear models (GLM) with gamma and Tweedie distributions to identify major dynamic and thermodynamic drivers from a reanalysis dataset within a robust cross-validation framework that explain observed spatiotemporal precipitation patterns across the Indus basin. Final statistical models demonstrate higher predictability to resolve precipitation variability over wetter southern Himalayans and different lower Indus regions, by mainly using different dynamic predictors. The modeling framework also shows an adequate performance over more complex and uncertain trans-Himalayans and the northwestern regions of the UIB, particularly during the seasons dominated by the westerly circulations. However, the cryosphere-dominated trans-Himalayan regions, which largely govern the basin hydrology, require relatively complex models that contain dynamic and thermodynamic circulations. Furthermore, we also analyzed relevant atmospheric circulations during precipitation anomalies over the UIB, to evaluate physical consistency of the statistical models, as an additional measure of reliability. Overall, our results suggest that such circulation-based statistical downscaling has the potential to improve our understanding towards distinct features of the regional-scale precipitation across the upper and lower Indus basin. Additionally, such understanding should help to assess the response of this complex, data-scarce, and climate-sensitive river basin amid future climatic changes, to serve communal and scientific interests.

54 ENVIRONMENTAL SCIENCES↗

Development of SAM Code Capabilities for Safety Analysis of GCR Air-ingress Events

Air-ingress following a depressurized loss-of-forced-cooling (DLOFC) event is a challenging, multiphysics safety scenario for High-Temperature Gas-Cooled Reactors (HTGRs), involving coupled gas composition transport, buoyancy-driven flow redistribution, graphite oxidation, and structural heat-up. Despite its importance — air ingress is a key scenario identified in the PIRT process for the HTGRs — existing system-level safety codes have lacked the integrated capability to simulate the complete event sequence with high confidence. This report documents the development, validation, and demonstration of three new capabilities in the SAM code to address this gap: (1) a multi-component gas mixture flow model with binary diffusion to track the helium-air composition and its effect on system density and flow; (2) a 0-D graphite oxidation model based on the Roes correlation, including oxygen consumption and exothermic heat release; and (3) an isentropic critical flow model for accurate representation of primary system depressurization through a break. These capabilities are validated against two benchmark experiments. The NSTF heavy-gas ingress experiment validates the multi-component flow model: SAM correctly reproduces the rapid buoyancydriven flow stagnation and subsequent natural circulation recovery driven by composition-dependent density changes. The NACOK graphite oxidation experiment validates the oxidation model: SAM predicts a bottom-level graphite weight loss of 25%, in close agreement with the measured 24%, and reproduces the strong axial nonuniformity and block-geometry dependence of oxidation, at a level comparable to the SPECTRA and TINTE codes. The validated capabilities are then exercised together in an integrated, reactor-scale simulation of a DLOFC air-ingress transient in a simplified HTR-PM pebble-bed reactor. In a single calculation spanning approximately 8 days, SAM reproduces the complete accident sequence: rapid depressurization, densityand diffusion-driven air ingress over ˜15 hours, onset of buoyancy-driven natural circulation, exothermic graphite oxidation with a peak fuel temperature at ˜62 hours, and eventual passive cooldown. These results demonstrate that SAM now provides the nuclear community with a preliminarily validated, modern systemlevel tool for HTGR air-ingress safety analysis, filling a recognized capability gap. Future extensions to broaden species tracking, improve oxidation chemistry, and refine the reactor model are discussed.

Yang, Gang↗

Baroclinic Residual Circulation and Mass Transport Due to Internal Tides

Baroclinic (BC) tidal residual circulation due to internal tides is investigated around islands over a shallow ridge using a numerical ocean model. Internal tides enhance vertical mixing over shallow slopes, leading to horizontal density gradients that drive BC residual circulation along the main thermocline. For a strongly stratified summer case, the vertical diffusivity estimated by the Mellor and Yamada turbulence closure model exceeds 1 × 10 -2 m 2 s -1 , and the velocity of BC residual circulations reaches 0.2 m s -1 . The magnitude of BC residual circulation is larger than that of barotropic residual tidal circulation, implying that BC residual circulation due to internal tides plays an important role in coastal ocean circulation. Furthermore, BC residual flow accounts for an equal percentage (5%) of the total tidal kinetic energy as the barotropic residual flow under summer stratification conditions. Results from a coupled sediment resuspension and transport model show the growth of intermediate nepheloid layers formed by strong bottom shear stress and BC residual flow. The residual component contributes largely (23% of the total in summer) to the total suspended sediment flux. Seasonal variability is explored, with weaker winter stratification leading to reduced mixing, and thus weaker BC residual circulation and sediment flux. Lastly, the magnitude of the BC residual circulation is also shown to be proportional to the square of the tidal amplitude.

54 ENVIRONMENTAL SCIENCES↗

Benchmark Specifications for Select Experiments Conducted at the Kansas State University Gallium Thermal-hydraulic Experiment Facility

The Department of Energy (DOE) – Nuclear Energy University Programs (NEUP) supported the creation and operation of the Gallium Thermal-hydraulic Experiment (GaTE) facility at Kansas State University (KSU) as part of a larger effort to understand thermal stratification behavior in liquid-metal-cooled reactors. GaTE was designed to simulate transients in a reactor plenum that are known to cause thermal stratification. High-reliability and high-resolution measurements describing stratification behavior in the coolant were collected for use as experimental benchmarks in validation efforts for computational models. The results of these tests contribute to a greater understanding of thermal stratification behavior of liquid metal under various configurations and operating conditions. This report provides a complete description of the benchmark problem, including all necessary details and description of a set of four forced flow and four natural circulation tests and measured data for comparison with model results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Constraining the Varied Response of Northern Hemisphere Winter Circulation Waviness to Climate Change

Abstract While a large latitudinal displacement of the westerly jet brings about disproportionate socioeconomic impacts over Northern Hemisphere midlatitude continents, it is not well understood as to whether the winter circulation will become wavier or less in response to climate change. Here, using observations and large ensembles of climate models, we show that changes in atmospheric waviness can be estimated from the optimal structures of the westerly jet for wavier circulation, which are obtained from an advection‐diffusion model. Thus, the changes in westerly jet structure in climate models under climate change provide a physical constraint on changes in atmospheric waviness, indicating that the North Atlantic wave activity will experience a robust decline in a warmer climate, while future North Pacific wave activity is obscured by model uncertainty rather than internal variability. These findings highlight the changes to jet stream structure as a constraint for regional circulation waviness in a changing climate.

54 ENVIRONMENTAL SCIENCES↗

Modeling of Vertical Motor-driven Pump for Simulation of a Fault Signature \\ for Condition Monitoring

As part of the ongoing effort to transition from preventive maintenance strategies to condition-based maintenance strategies in nuclear power plants, there is significant reliance on using machine learning techniques. To develop a robust machine learning model that can diagnose all the fault modes of a vertical motor-driven pump, data capturing the unique signature of each fault mode is required. In practice, it is difficult to collect or capture data that captures all the fault modes from a single plant site. So to address this situation, a computational model of a vertical motor-driven pump is developed using the multipurpose finite element software COMSOL Multiphysics. The developed model is used to generate simulated data under normal operation and is compared with the vibration data collected using vibration sensors. Once the simulation model is verified under normal operating condition, simulated data for the fault mode for which minimal or no evidence is available in historical plant process data is developed. This simulated data is used to develop fault signatures to achieve robust predictive models. This paper presents modeling details and verification of the model that can used to generate data for fault modes that are not available at a plant site for condition monitoring purpose.

46 - INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AN↗

The Atlantic Meridional Overturning Circulation’s Response to CO2 Increase: Assessing the Roles of Surface Flux and Oceanic Advection Feedbacks

Abstract The Atlantic meridional overturning circulation (AMOC) is projected to slow down in climate models due to greenhouse gas emissions. However, the physical mechanisms determining the rate of the projected AMOC slowdown remain unclear. Accordingly, this study isolates the roles of oceanic advection and surface flux feedbacks that might accelerate or decelerate the AMOC’s weakening using carbon dioxide (CO 2 ) quadrupling simulations in the CESM1.2 model. Surface flux feedbacks are isolated in partially coupled experiments in which either all surface flux components or the momentum flux responses to AMOC’s weakening that might provide feedback are suppressed, while a tracer decomposition of ocean density anomalies isolates the advection feedbacks. Comparing the ocean density components in the experiments shows that the AMOC’s response is initially determined by CO 2 -induced anomalous surface heat fluxes, and afterward, feedbacks determine its response. In the fully coupled case, surface heat flux feedback strongly promotes AMOC slowdown and causes its near shutdown, while a weaker but active AMOC is maintained when the surface flux feedback is inhibited in the partially coupled case. The positive surface heat flux feedback works by canceling out the negative oceanic heat advection feedback on deep-water formation in the subpolar North Atlantic (SPNA). With the heat advection feedback thus reduced, the positive salinity advection feedback becomes the dominant contributor to SPNA density changes and deep-water formation. In the partially coupled case, negative ocean heat advection feedback and the CO 2 -induced subtropical Atlantic saline anomalies imported into the SPNA play a stabilizing role. The results highlight the importance of SPNA salinity gradients and gyre circulation strength in determining the AMOC’s response rate or recovery.

54 ENVIRONMENTAL SCIENCES↗

Roles of External Forcing and Internal Variability in Precipitation Changes of a Sub-Region of the U.S. Mid-Atlantic During 1979–2019

Observations of the seasonal mean precipitation averaged over a sub-region of the U.S. mid-Atlantic show significant increases in summer but no changes in winter during 1979–2019. Clarifying the drivers of these observed changes is important for understanding and interpreting future projections of regional precipitation by climate models. Herein, this study examines the relative effects of external forcing and internal variability in the observed multi-decadal changes using the historical and RCP8.5/SSP585 simulations from 37 models in the Coupled Model Intercomparison Project phase 5 (CMIP5), 35 models in CMIP6, as well as large ensemble simulations from 6 models, each including more than 20 members. During 1979–2019, enhanced warming over land relative to ocean due to external forcing induces low pressure anomalies over land that contribute to the wetting summer. While similar wetting also occurs during winter, such effect is offset by the drying associated with the positive phase of the North Atlantic Oscillation (NAO) in recent decades. Internal variability produces large uncertainty in the multi-decadal precipitation changes simulated by climate models through changes in large-scale circulation associated with the NAO in winter and the North Atlantic Subtropical High in summer. These multi-decadal relationships between precipitation and large-scale circulation under internal variability also manifest on inter-annual timescale. These relationships highlight enhanced moisture transport from the Gulf of Mexico and North Atlantic in winter and near the mid-Atlantic coast in summer that modulates precipitation change in the study region.

54 ENVIRONMENTAL SCIENCES↗

Age-specific case data reveal varying dengue transmission intensity in US states and territories

Dengue viruses (DENV) are endemic in the US territories of Puerto Rico, American Samoa, and the US Virgin Islands, with focal outbreaks also reported in the states of Florida and Hawaii. However, little is known about the intensity of dengue virus transmission over time and how dengue viruses have shaped the level of immunity in these populations, despite the importance of understanding how and why levels of immunity against dengue may change over time. These changes need to be considered when responding to future outbreaks and enacting dengue management strategies, such as guiding vaccine deployment. We used catalytic models fitted to case surveillance data stratified by age from the ArboNET national arboviral surveillance system to reconstruct the history of recent dengue virus transmission in Puerto Rico, American Samoa, US Virgin Islands, Florida, Hawaii, and Guam. We estimated average annual transmission intensity (i.e., force of infection) of DENV between 2010 and 2019 and the level of seroprevalence by age group in each population. We compared models and found that assuming all reported cases are secondary infections generally fit the surveillance data better than assuming all cases are primary infections. Using the secondary case model, we found that force of infection was highly heterogeneous between jurisdictions and over time within jurisdictions, ranging from 0.00008 (95% CrI: 0.00002–0.0004) in Florida to 0.08 (95% CrI: 0.044–0.14) in American Samoa during the 2010–2019 period. For early 2020, we estimated that seropositivity in 10 year-olds ranged from 0.09% (0.02%–0.54%) in Florida to 56.3% (43.7%–69.3%) in American Samoa. In the absence of serological data, age-specific case notification data collected through routine surveillance combined with mathematical modeling are powerful tools to monitor arbovirus circulation, estimate the level of population immunity, and design dengue management strategies.

60 APPLIED LIFE SCIENCES↗

Cooperative Research and Development Agreement between National Energy Technology Laboratory and Korea Institute of Energy Research [Abstract]

The Korea Institute of Energy Research (KIER) and the National Energy Technology Laboratory (NETL) intend to collaborate under a CRADA to advance the development of oxy-combustion technology, with an emphasis on process modeling, optimization, and techno-economic analysis. This collaboration will result in the development of a full-scale process model of a commercial oxy-fueled circulating fluid bed combustion (oxy-CFBC) plant, informed from pilot-scale data and built using the Institute for the Design of Advanced Energy Systems (IDAES) process systems engineering framework. It will also generate cost comparisons of the optimized oxyCFBC process with an air-CFBC process with and without carbon capture and sequestration.

20 FOSSIL-FUELED POWER PLANTS↗

Technical Documents for Gateway for Accelerated Innovation in Nuclear (GAIN)

The Gateway for Accelerated Innovation in Nuclear (GAIN) provides the nuclear energy community with access to the technical, regulatory, and financial support necessary to move new or advanced nuclear reactor designs toward commercialization. GAIN provides the nuclear community with a single point of access to the broad range of capabilities (i.e., people, facilities, materials, and data) across the U.S. Department of Energy (DOE) complex and its National Lab capabilities. The Fast Flux Test Facility (FFTF) is the most recent liquid metal reactor (LMR) to be designed, constructed, and operated by DOE. The 400-MWt sodium-cooled, fast-neutron flux reactor plant was designed for irradiation testing of nuclear reactor fuels and materials for liquid metal fast breeder reactors. Following the demise of the breeder reactor program in the United States, FFTF continued to play a key role in providing a test bed for demonstrating performance of advanced fuel designs and demonstrating operation, maintenance, and safety of advanced liquid metal reactors. The FFTF Program provides valuable information for potential follow-on reactor projects in the areas of plant system and component design, component fabrication, fuel design and performance, reactor control, prototype testing, and site construction. This report provides documents related to three important aspects of FFTF design and operation: 1) irradiation behavior of structural alloys and absorber materials, 2) thermohydraulics of rod bundles (i.e., coolant mixing), and 3) natural circulation heat transfer in the areas of modeling and validation. These technical documents are believed to be of interest to the nuclear industry and in particular to designers of new liquid metal reactors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗