Search NASA⌕ Search

SEARCH · Search NASA

Results for “closed-loop”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

The stochastic control of the F-8C aircraft using a multiple model adaptive control /MMAC/ method. I - Equilibrium flight

The purpose of this paper is to summarize some results obtained for the adaptive control of the F-8C aircraft using the so-called MMAC method. The discussion includes the selection of the performance criteria for both the lateral and the longitudinal dynamics, the design of the Kalman filters for different flight conditions, the 'identification' aspects of the design using hypothesis testing ideas, and the performance of the closed-loop adaptive system.

Athans, M.↗
NASA NTRS1977

Control of nonlinear stochastic systems using adaptive estimation

A general procedure for the design of a digital controller for nonlinear stochastic systems is presented; the emphasis is on development of partitioned-adaptive control techniques which provide rapid tracking of the system state vector to follow rapid trajectory variations. Tests involving the control of a low-order nonlinear oscillator suggest that the procedure yields an effective method for achieving closed-loop performance, despite the difficulty of the control problem

Vanlandingham, H. F.↗
NASA NTRS1978

Independent radio-occultation studies of Venus' atmospheres

Closed-loop frequency data from Mariner 10 have provided S and X-band temperature-pressure profiles for Venus' neutral atmosphere, as well as an S-band profile for the nightside ionosphere. The dual-frequency radio-occultation experiment was independently monitored by two radio telescopes: Goldstone and Owens Valley (X-band only). Comparisons are also made with data obtained from Mariner 5 and in-situ measurements from Veneras 8, 9, and 10. Attention is given to anomalies in the amplitude and frequency of spacecraft signals during their exit from the Venusian atmosphere, as evidenced by radio occultation.

Nicholson, P. D.↗
NASA NTRS1977

Robustness of linear quadratic state feedback designs in the presence of system uncertainty

The paper deals with the problem of expressing the robustness (stability) property of a linear quadratic state feedback (LQSF) design quantitatively in terms of bounds on the perturbations (modeling errors or parameter variations) in the system matrices so that the closed-loop system remains stable. Nonlinear time-varying and linear time-invariant perturbations are considered. The only computation required in obtaining a measure of the robustness of an LQSF design is to determine the eigenvalues of two symmetric matrices determined when solving the algebraic Riccati equation corresponding to the LQSF design problem. Results are applied to a complex dynamic system consisting of the flare control of a STOL aircraft. The design of the flare control is formulated as an LQSF tracking problem.

Patel, R. V.↗
NASA NTRS1978

Eigenvalue/eigenvector assignment using output feedback

The problem of pole-assignment in a linear time-invariant multivariable system using output feedback is considered. New sufficient conditions are derived to assign an almost arbitrary set of min (n, m+r-1) distinct eigenvalues, where n, m, and r are the number of states, inputs, and outputs, respectively. The analysis also highlights the freedom in selection of closed-loop eigenvectors which can be used for response shaping.

Srinathkumar, S.↗
NASA NTRS1978

Digital set point control of nonlinear stochastic systems

A technique for digital control of nonlinear stochastic plants is presented. The development achieves a practical digital algorithm with which the closed-loop system behaves in a classical Type I manner even with gross nonlinearities in the plant structure and low signal-to-noise power ratios. The design procedure is explained in detail and illustrated by an example whose simulated responses testify to the practicality of the approach.

Moose, R. L.↗
NASA NTRS1978

On attitude estimation schemes for fine-pointing control

This paper studies single-axis equations of motion that are applicable to a spacecraft or to a space experiment pointing assembly whose motion has been perfectly isolated from the carrier vehicle. It considers four state estimators for implementation in the control loop for a stellar observation experiment. The first three estimators are very general and do not make use of input torque in their prediction models, while the proposed fourth estimator utilizes this information. It is shown via closed-loop covariance analysis that the best achievable pointing performance with the best of the first three estimators is limited to about 0.125 arc-sec (rms) with the given rate-gyro and star-tracker inaccuracies. It is also shown that the fourth estimator has the capability of achieving a pointing performance far superior to the performance achievable using the first three estimators. The fourth estimator relies on the ability to accurately generate the desired control torque (i.e., low input noise).

Joshi, S. M.↗
NASA NTRS1978

Shuttle/tethered satellite system

A tethered satellite system has been conceived as a device to extend the capability of the Space Shuttle to perform scientific/applications investigations and operational activities. The concept envisions a multiple-use tethered system with closed-loop control, capable of supporting a payload or satellite suspended from the Shuttle cargo bay, toward or away from the earth, at distances up to 100 kilometers from the Shuttle. This paper discusses the background and results of early analyses and feasibility studies, and presents a design and operational description of the system. Also presented are a discussion of potential applications of the Tethered Satellite System, and plans for an operational verification flight in 1982.

Rupp, C. C.↗
NASA NTRS1978

Precision pointing and tracking system /PPTS/

As part of its advanced development work, JPL is developing a Precision Pointing and Tracking System (PPTS) for science platform control on unmanned planetary spacecraft. The PPTS will extend science capabilities on future missions by providing highly accurate (10 arcsec) and stable (0.2 arcsec) pointing of the platform. Key features of the design include closed-loop tracking of target bodies using an optical sensor and decoupling of spacecraft dynamics via high-bandwidth, inertially stabilized control. This paper discusses the analyses and design. Computer simulations were used to establish the feasibility of the design approach and to verify that the performance requirements can be met. A breadboard demonstration of the entire system is expected in late 1980.

Brown, T. K.↗
NASA NTRS1978

Digital pointing control

The digital pointing control system developed for the Space Shuttle Data Bus is discussed. The device, which interfaces with NASA standard sensor units, contains a front panel controller, a development system to load, inspect, print, and store the program and data, and a 'test jig' to provide closed-loop controller operation. The system is described with particular reference to the tracker-gyro interfaces, the control algorithms and compensation procedures, Kalman-estimation filtering, the proportional power output, and the discrete output capability. The results of simulation studies are presented and the development status is noted.

Studer, P. A.↗
NASA NTRS1978

A preference-ordered discrete-gaming approach to air-combat analysis

An approach to one-on-one air-combat analysis is described which employs discrete gaming of a parameterized model featuring choice between several closed-loop control policies. A preference-ordering formulation due to Falco is applied to rational choice between outcomes: win, loss, mutual capture, purposeful disengagement, draw. Approximate optimization is provided by an active-cell scheme similar to Falco's obtained by a 'backing up' process similar to that of Kopp. The approach is designed primarily for short-duration duels between craft with large-envelope weaponry. Some illustrative computations are presented for an example modeled using constant-speed vehicles and very rough estimation of energy shifts.

Kelley, H. J.↗
NASA NTRS1978

Vision-based guidance for an automated roving vehicle

A controller designed to guide an automated vehicle to a specified target without external intervention is described. The intended application is to the requirements of planetary exploration, where substantial autonomy is required because of the prohibitive time lags associated with closed-loop ground control. The guidance algorithm consists of a set of piecewise-linear control laws for velocity and steering commands, and is executable in real time with fixed-point arithmetic. The use of a previously-reported object tracking algorithm for the vision system to provide position feedback data is described. Test results of the control system on a breadboard rover at the Jet Propulsion Laboratory are included.

Griffin, M. D.↗
NASA NTRS1978

Transfer function tests of the Joy longwall shearer

A series of operational tests was performed on the Joy longwall shearer located at the Bureau of Mines in Bructon, Pennsylvania. The purpose of these tests was to determine the transfer function and operational characteristics of the system. These characteristics will be used to generate a simulation model of the longwall shearer used in the development of the closed-loop vertical control system.

Fisher, P. H., Jr.↗
NASA NTRS1978

Flight experience with manually controlled unconventional aircraft motions

A modified YF-16 aircraft was used to flight demonstrate decoupled modes under the USAF Fighter Control Configured Vehicle (CCV) Program. The direct force capabilities were used to implement seven manually controlled unconventional modes on the aircraft, allowing flat turns, decoupled normal acceleration control, independent longitudinal and lateral translations, uncoupled elevation and azimuth aiming, and blended direct lift. This paper describes the design, development, and flight testing of these control modes. The need for task-tailored mode authorities, gain-scheduling and selected closed-loop design is discussed.

Barfield, A. F.↗
NASA NTRS1977

A control theoretic model of driver steering behavior

A quantitative description of driver steering behavior such as a mathematical model is presented. The steering task is divided into two levels: (1) the guidance level involving the perception of the instantaneous and future course of the forcing function provided by the forward view of the road, and the response to it in an anticipatory open-loop control mode; (2) the stabilization level whereby any occuring deviations from the forcing function are compensated for in a closed-loop control mode. This concept of the duality of the driver's steering activity led to a newly developed two-level model of driver steering behavior. Its parameters are identified on the basis of data measured in driving simulator experiments. The parameter estimates of both levels of the model show significant dependence on the experimental situation which can be characterized by variables such as vehicle speed and desired path curvature.

Donges, E.↗
NASA NTRS1977

Manual control of yaw motion with combined visual and vestibular cues

Measurements are made of manual control performance in the closed-loop task of nulling perceived self-rotation velocity about an earth-vertical axis. Self-velocity estimation was modelled as a function of the simultaneous presentation of vestibular and peripheral visual field motion cues. Based on measured low-frequency operator behavior in three visual field environments, a parallel channel linear model is proposed which has separate visual and vestibular pathways summing in a complementary manner. A correction to the frequency responses is provided by a separate measurement of manual control performance in an analogous visual pursuit nulling task. The resulting dual-input describing function for motion perception dependence on combined cue presentation supports the complementary model, in which vestibular cues dominate sensation at frequencies above 0.05 Hz. The describing function model is extended by the proposal of a non-linear cue conflict model, in which cue weighting depends on the level of agreement between visual and vestibular cues.

Zacharias, G. L.↗
NASA NTRS1977

An information matrix approach for aircraft parameter-insensitive control

The Fisher Information Matrix provides the nucleus of a design procedure for obtaining parameter-insensitive feedback gains in Linear-Quadratic-Gaussian problems. The procedure minimizes a sum of performance and closed-loop sensitivity costs, the latter being related to the information content of the system response. Analytical expressions for the appended cost functional and its gradient with respect to the feedback gains are derived. These derivatives serve as the basis of a computationally efficient iterative algorithm that finds the optimal gains. Application of the technique is made to determine low sensitivity feedback gains for a C-5A wing loading alleviation system that has 15 states and three uncertain parameters.

Kleinman, D. L.↗