Search NASA⌕ Search

SEARCH · Search NASA

Results for “cloud data products”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2005

Height Distribution Between Cloud and Aerosol Layers from the GLAS Spaceborne Lidar in the Indian Ocean Region

The Geoscience Laser Altimeter System (GLAS), a nadir pointing lidar on the Ice Cloud and land Elevation Satellite (ICESat) launched in 2003, now provides important new global measurements of the relationship between the height distribution of cloud and aerosol layers. GLAS data have the capability to detect, locate, and distinguish between cloud and aerosol layers in the atmosphere up to 40 km altitude. The data product algorithm tests the product of the maximum attenuated backscatter coefficient b'(r) and the vertical gradient of b'(r) within a layer against a predetermined threshold. An initial case result for the critical Indian Ocean region is presented. From the results the relative height distribution between collocated aerosol and cloud shows extensive regions where cloud formation is well within dense aerosol scattering layers at the surface. Citation: Hart, W. D., J. D. Spinhime, S. P. Palm, and D. L. Hlavka (2005), Height distribution between cloud and aerosol layers from the GLAS spaceborne lidar in the Indian Ocean region,

Hart, William D.↗
NASA NTRS2015

Intelligent Observation Strategies for Geosynchronous Remote Sensing for Natural Hazards

Geosynchronous satellites offer a unique perspective for monitoring environmental factors important to understanding natural hazards and supporting the disasters management life cycle, namely forecast, detection, response, recovery and mitigation. In the NASA decadal survey for Earth science, the GEO-CAPE mission was proposed to address coastal and air pollution events in geosynchronous orbit, complementing similar initiatives in Asia by the South Koreans and by ESA in Europe, thereby covering the northern hemisphere. In addition to analyzing the challenges of identifying instrument capabilities to meet the science requirements, and the implications of hosting the instrument payloads on commercial geosynchronous satellites, the GEO-CAPE mission design team conducted a short study to explore strategies to optimize the science return for the coastal imaging instrument. The study focused on intelligent scheduling strategies that took into account cloud avoidance techniques as well as onboard processing methods to reduce the data storage and transmission loads. This paper expands the findings of that study to address the use of intelligent scheduling techniques and near-real time data product acquisition of both the coastal water and air pollution events. The topics include the use of onboard processing to refine and execute schedules, to detect cloud contamination in observations, and to reduce data handling operations. Analysis of state of the art flight computing capabilities will be presented, along with an assessment of cloud detection algorithms and their performance characteristics. Tools developed to illustrate operational concepts will be described, including their applicability to environmental monitoring domains with an eye to the future. In the geostationary configuration, the payload becomes a networked thing with enough connectivity to exchange data seamlessly with users. This allows the full field of view to be sensed at very high rate under the control of ground infrastructure, resulting in improved efficiencies, accuracy and science benefits. Hence a remote sensing payload and its data may become one of millions of connected objects in the emerging Internet of Things (IoT), and be as easily accessible by a users smart phone as any other smart appliance.

0↗
NASA NTRS1983

Cloud observations with Nimbus-7 satellite data

A Nimbus-7 Cloud Data Processing Team was established in 1982 in order to implement cloud-related studies for as long as the spacecraft's Temperature Humidity IR radiometer and Total Ozone Mapping Spectrometer continue to operate. It will soon be possible to correlate the Nimbus-7 cloud cover information with International Satellite Cloud Climatology results. The production of validated Nimbus-7 cloud products was scheduled to begin in November, 1983; each year of Nimbus-7 cloud data should take about four months to produce.

Stowe, L. L.↗
NASA NTRS2008

CALIPSO Satellite Lidar Identification Of Elevated Dust Over Australia Compared With Air Quality Model PM60 Forecasts

Global measurements of the vertical distribution of clouds and aerosols have been recorded by the lidar on board the CALIPSO (Cloud Aerosol Lidar Infrared Pathfinder Satellite Observations) satellite since June 2006. Such extensive, height-resolved measurements provide a rare and valuable opportunity for developing, testing and validating various atmospheric models, including global climate, numerical weather prediction, chemical transport and air quality models. Here we report on the initial results of an investigation into the performance of the Australian Air Quality Forecast System (AAQFS) model in forecasting the distribution of elevated dust over the Australian region. The model forecasts of PM60 dust distribution are compared with the CALIPSO lidar Vertical Feature Mask (VFM) data product. The VFM classifies contiguous atmospheric regions of enhanced backscatter as either cloud or aerosols. Aerosols are further classified into six subtypes. By comparing forecast PM60 concentration profiles to the spatial distribution of dust reported in the CALIPSO VFM, we can assess the model s ability to predict the occurrence and the vertical and horizontal extents of dust events within the study area.

Young, Stuart A.↗
NASA NTRS2018

GEONEX: Webpage to Display NASA-NOAA Collaboration of Producing Land Surface Products from Geostationary Sensors

The latest generation of geostationary satellites carry sensors such as the Advanced Baseline Imager (GOES-16/17) and the Advanced Himawari Imager (Himawari-8/9) that closely mimic the spatial and spectral characteristics of MODIS and VIIRS, useful for monitoring land surface conditions. The NASA Earth Exchange (NEX) team at Ames Research Center has embarked on a collaborative effort among scientists from NASA and NOAA exploring the feasibility of producing operational land surface products similar to those from MODIS/VIIRS. The team built a processing pipeline called GEONEX that is capable of converting raw geostationary data into routine products of Fires, surface reflectances, vegetation indices, LAI/FPAR, ET and GPP/NPP using algorithms adapted from both NASA/EOS and NOAA/GOES-R programs. The GEONEX pipeline has been deployed on Amazon Web Services cloud platform and it currently leverages near-realtime geostationary data hosted in AWS public datasets under a NOAA-AWS agreement.In order to better introduce the GEONEX products to the science community, we set up a simple webpage (www.geonex.org) to describe the background and the motivation of the project, the algorithms used in deriving the products, and user manuals to the data files. We will also update the status of the data processing, in particular the near-real-time products, on the website and provide links (in text or json files) to the latest datasets.

geostationary↗
NASA NTRSDate not supplied

CERES Top-of-atmosphere and Surface fluxes in the Arctic: A comparison with ARISE and MOSAiC measurements

Uncertainty in the NASA Clouds and the Earth’s Radiant Energy System (CERES)-derived irradiances is larger over sea ice than any other surface type and comes from several sources. This presentation summarizes results from comparisons of CERES data with the year-long Multidisciplinary drifting Observatory for the Study of Arctic Climate (MOSAiC) expedition in the central Arctic and the Arctic Radiation and Icebridge Sea ice Experiment (ARISE). The CERES Synoptic 1degree (SYN1deg) product overestimates the downwelling shortwave flux by 11.40 Wm–2 and underestimates the upwelling shortwave flux by –15.70 Wm–2 and downwelling longwave fluxes by –12.58 Wm–2 at the surface during summer. In addition, large differences are found in the upwelling longwave flux when the surface approaches the melting point (approximately 0C). The large negative bias in upwelling shortwave flux can be attributed in large part to lower surface albedo (–0.15) in satellite footprint relative to surface sensors. The CERES-MOSAiC broadband albedo differences (approximately 20 Wm–2) explain a larger portion of the upwelling shortwave flux difference than the spectral albedo shape differences (approximately 3 Wm–2). The ARISE results indicate the some of these differences in the SW are due to the scene identification and representation of anisotropy in partly cloud scenes. Switching from imager-based to passive microwave-based sea ice data in the CERES inversion process reduces the differences in the grid box average fluxes and in the sea ice partly cloudy scene anisotropy in the instantaneously-matched footprints. Our analysis indicates that calibration and sampling uncertainty limit the ability to place strong constraints (<7%) on CERES TOA fluxes with aircraft measurements. The results indicate that improvements in the surface albedo and cloud data would substantially reduce the uncertainty in the Arctic surface radiation budget derived from CERES data products.

Patrick C Taylor↗
NASA NTRS2000

The Atmospheric Channels of GLAS: Near Real-Time Global Lidar Remote Sensing of Clouds and Aerosols from Space

The Geoscience Laser Altimeter System (GLAS) will be placed into orbit in 2001 aboard the Ice, Cloud and Land Elevation Satellite (ICESat). From its nearly polar orbit (94 degree inclination), GLAS will provide continuous global measurements of the vertical distribution of clouds and aerosols while simultaneously providing high accuracy topographic profiling of surface features. During the mission, which is slated to last 3 to 5 years, the data collected by GLAS will be in near-real time to produce level 1 and 2 data products at the NASA GLAS Science Computing Facility (SCF) at Goddard Space Flight Center in Greenbelt, Maryland. The atmospheric products include cloud and aerosol layer heights, planetary boundary layer depth, polar stratospheric clouds and thin cloud and aerosol optical depth. These products will be made available to the science community within days of their creation. The processing algorithms must be robust, adaptive, efficient, and clever enough to run autonomously for the widely varying atmospheric conditions that will be encountered. This paper presents an overview of the GLAS atmospheric data products and briefly discusses the design of the processing algorithms.

Palm, Stephen P.↗
NASA NTRSDate not supplied

Cloud-Type Mean Cloud Properties and Associated Cloud Radiative Effects in the Tropical “Chimney” Zones Using 20 Years High-Resolution CERES Satellite Data

It has been well known that convection tends to be more intense over land than over ocean and continental convection generally contains wider cores that are protected from entrainment than their oceanic counterparts. How does this difference in convective intensity impact the rest of cloud types and associated cloud radiative effects (CREs)? We select five regions in the tropical “chimney” zones, with two regions over land (Africa and Amazon) and three regions over ocean (eastern and western Pacific, and Atlantic) to understand the differences in the cloud-type mean cloud properties and associated CREs using 20-years high-resolution (2x2 km2) CERES satellite data. The cloud types are based upon the ISCCP classification using the joint cloud-top pressure and cloud optical depth distribution. These five regions are compared to the entire tropics (25°S to 25°N). First, we compare the frequencies of occurrence of cloud types among the regions. Compared to the entire tropics, the “chimney” zones are cloudier, particularly, for cloud types with moderate cloud optical depths in the middle and upper troposphere. Except for the eastern Pacific region, the low-level cloud types are less abundant over land (due to higher boundary layers) and ocean (due to weaker lower-tropospheric subsidence). Over Africa, upper-level clouds are scarcer, due perhaps to weak production of convective anvils related to the drier atmosphere. Second, liquid water path (LWP) and ice water path (IWP) are compared among the regions. Compared to the entire tropics, mean LWPs for moderate cloud optical depths are higher for oceanic regions but lower for Africa while they are slightly lower in the lower troposphere but slightly higher in the middle troposphere for Amazon. Not surprisingly, mean IWPs are higher over land than over ocean, which is directly related to the difference in convective intensity. That is, the explanations to this result are the relatively weak convective intensity over the eastern Pacific and the abundance of anvil clouds over the western Pacific. Both reduce the mean IWPs. The CRE results are still being analyzed because the totally-clear grids (1° x 1°) of the CERES data product should be removed before taking a regional mean of clear-sky fluxes, which cause the wrong signs of CREs for a few cloud types.

cloud radiative effects↗
NASA NTRSDate not supplied

All-sky Retrieval of Atmospheric Temperature, Water Vapor, Clouds, Trace Gases, and Surface Properties from Operational Hyperspectral IR Sounders

Operational IR sounders such AIRS, CrIS, and IASI provide high quality hyperspectral measurements for weather and climate applications. We will describe a new all-sky Single Field-of-view Sounder Atmospheric Product (SiFSAP). The uniqueness of this product is that it uses all available channels from hyperspectral sounders and the optimal estimation retrieval is done at a single FOV spatial resolution. The SiFSAP includes atmospheric temperature, water vapor, clouds, trace gases, surface skin, and surface emissivity and will be produced operationally at NASA GES DISC. We will describe the core component of the SiFSAP algorithm, which is the Principal Component-based Radiative Transfer Model (PCRTM), and will show example applications of the SiFSAP product for various atmospheric weather and dynamics studies. We also describe a new Climate Fingerprinting Sounder Product (ClimFiSP), which is derived from spatiotemporally averaged level-1 hyperspectral radiances directly. The ClimFiSP algorithm uses consistent radiative kernels and a robust spectral fingerprinting method. It provides fast and accurate data fusion products from multiple satellite sensors. We have applied this method to both AIRS and CrIS (on SNPP and on NOAA 20) data and generated two decades climate data records for atmospheric temperature, water vapor, cloud, trace gases, and surface skin temperature. The ClimFiSP are being transitioned to NASA data centers for routine generations level-3 products.

pcrtm↗
NASA NTRS2014

A Wrf-Chem Flash Rate Parameterization Scheme and LNO(x) Analysis of the 29-30 May 2012 Convective Event in Oklahoma During DC3

The Deep Convective Clouds and Chemistry (DC3) field campaign in 2012 provided a plethora of aircraft and ground-based observations (e.g., trace gases, lightning and radar) to study deep convective storms, their convective transport of trace gases, and associated lightning occurrence and production of nitrogen oxides (NOx). Based on the measurements taken of the 29-30 May 2012 Oklahoma thunderstorm, an analysis against a Weather Research and Forecasting Chemistry (WRF-Chem) model simulation of the same event at 3-km horizontal resolution was performed. One of the main objectives was to include various flash rate parameterization schemes (FRPSs) in the model and identify which scheme(s) best captured the flash rates observed by the National Lightning Detection Network (NLDN) and Oklahoma Lightning Mapping Array (LMA). The comparison indicates how well the schemes predicted the timing, location, and number of lightning flashes. The FRPSs implemented in the model were based on the simulated thunderstorms physical features, such as maximum vertical velocity, cloud top height, and updraft volume. Adjustment factors were added to each FRPS to best capture the observed flash trend and a sensitivity study was performed to compare the range in model-simulated lightning-generated nitrogen oxides (LNOx) generated by each FRPS over the storms lifetime. Based on the best FRPS, model-simulated LNOx was compared against aircraft measured NOx. The trace gas analysis, along with the increased detail in the model specification of the vertical distribution of lightning flashes as suggested by the LMA data, provide guidance in determining the scenario of NO production per intracloud and cloud-to-ground flash that best matches the NOx mixing ratios observed by the aircraft.

Cloud physics↗
NASA NTRS2014

A WRF-Chem Flash Rate Parameterization Scheme and LNOx Analysis of the 29-30 May 2012 Convective Event in Oklahoma During DC3

The Deep Convective Clouds and Chemistry (DC3) field campaign in 2012 provided a plethora of aircraft and ground-based observations (e.g., trace gases, lightning and radar) to study deep convective storms, their convective transport of trace gases, and associated lightning occurrence and production of nitrogen oxides (NOx). Based on the measurements taken of the 29-30 May 2012 Oklahoma thunderstorm, an analysis against a Weather Research and Forecasting Chemistry (WRF-Chem) model simulation of the same event at 3-km horizontal resolution was performed. One of the main objectives was to include various flash rate parameterization schemes (FRPSs) in the model and identify which scheme(s) best captured the flash rates observed by the National Lightning Detection Network (NLDN) and Oklahoma Lightning Mapping Array (LMA). The comparison indicates how well the schemes predicted the timing, location, and number of lightning flashes. The FRPSs implemented in the model were based on the simulated thunderstorms physical features, such as maximum vertical velocity, cloud top height, and updraft volume. Adjustment factors were applied to each FRPS to best capture the observed flash trend and a sensitivity study was performed to compare the range in model-simulated lightning-generated nitrogen oxides (LNOx) generated by each FRPS over the storms lifetime. Based on the best FRPS, model-simulated LNOx was compared against aircraft measured NOx. The trace gas analysis, along with the increased detail in the model specification of the vertical distribution of lightning flashes as suggested by the LMA data, provide guidance in determining the scenario of NO production per intracloud and cloud-to-ground flash that best matches the NOx mixing ratios observed by the aircraft.

Atmospheric chemistry↗
NASA NTRS2016

Construction of a Matched Global Cloud and Radiance Product from LEO/GEO and EPIC Observations to Estimate Daytime Earth Radiation Budget from DSCOVR

With the launch of the Deep Space Climate Observatory (DSCOVR), new estimates of the daytime Earth radiation budget can be computed from a combination of measurements from the two Earth-observing sensors onboard the spacecraft, the Earth Polychromatic Imaging Camera (EPIC) and the National Institute of Standards and Technology Advanced Radiometer (NISTAR). Although these instruments can provide accurate top-of-atmosphere (TOA) radiance measurements, they lack sufficient resolution to provide details on small-scale surface and cloud properties. Previous studies have shown that these properties have a strong influence on the anisotropy of the radiation at the TOA, and ignoring such effects can result in large TOA-flux errors. To overcome these effects, high-resolution scene identification is needed for accurate Earth radiation budget estimation. Selected radiance and cloud property data measured and derived from several low earth orbit (LEO, including NASA Terra and Aqua MODIS, NOAA AVHRR) and geosynchronous (GEO, including GOES (east and west), METEOSAT, INSAT-3D, MTSAT-2, and HIMAWARI-8) satellite imagers were collected to create hourly 5-km resolution global composites of data necessary to compute angular distribution models (ADM) for reflected shortwave (SW) and longwave (LW) radiation. The satellite data provide an independent source of radiance measurements and scene identification information necessary to construct ADMs that are used to determine the daytime Earth radiation budget. To optimize spatial matching between EPIC measurements and the high-resolution composite cloud properties, LEO/GEO retrievals within the EPIC fields of view (FOV) are convolved to the EPIC point spread function (PSF) in a similar manner to the Clouds and the Earth's Radiant Energy System (CERES) Single Scanner Footprint TOA/Surface Fluxes and Clouds (SSF) product. Examples of the merged LEO/GEO/EPIC product will be presented, describing the chosen radiance and cloud properties and details of how data from the multi-satellite measurements are selected.

Duda, David P.↗
NASA NTRS2020

The Atmospheric Measurements of ICESat-2

ICESat-2 is an exciting new multi-beam, photon-counting, satellite lidar designed to acquire simultaneous high-resolution measurements of the earth's surface and atmospheric structure. Launched in September, 2018 the Advanced Topographic Lidar Altimeter System (ATLAS) on board ICESat-2 has been acquiring data continuously for nearly 1 year. The 3 laser beams comprising the atmospheric channel are providing excellent back scatter measurements that enable the retrieval of global cloud fraction, cloud and aerosol layer height, column optical depth, and blowing snow properties. Public release of the data products began with version 1in May, 2019 and continues with a significantly improved version 2 in October, 2019. This presentation will give an overview of the ICESat-2 atmospheric channel and show examples of cloud, aerosol and blowings now properties as well as comparisons of ATLAS and CALIOP measurements.

Palm, Stephen↗
NASA NTRS2018

Air Quality Satellite Monitoring by TROPOMI on Sentinel-5P

The recently launched Sentinel satellite mission, the Sentinel-5 Precursor (Sentinel-5P), is one of the European Space Agency's (ESA) new mission family – Sentinels. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), a nadir-viewing 108⁰ field-of-view push-broom grating hyperspectral spectrometer, covering the wavelengths of ultraviolet-visible (270 nm - 495 nm), near infrared (675 nm - 775 nm), and shortwave infrared (2305 nm - 2385 nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels, and is providing measurements of atmospheric chemistry, aerosols, and clouds at high spatial, temporal, and spectral resolution. The NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) supports over a thousand data collections in the focus areas of Atmospheric Composition, Water & Energy Cycles, and Climate Variability. Sentinel-5P TROPOMI Level-1B (L1B) and Level-2 (L2) products are curated at the GES DISC. Sentinel-5P data are provided by the European Union and the European Space Agency (ESA) through an agreement between ESA and NASA. Through its convenient and enhanced tools/services, such as OPeNDAP and L2 Subsetting, GES DISC offers the air quality remote sensing user community facile solutions for using complex Earth science data and applications. This presentation will demonstrate up-to-date TROPOMI products including EarthView (EV) radiance, solar irradiance, Aerosol Index, Carbon Monoxide, Total column Ozone, Nitrogen Dioxide, and cloud, as well as easy ways to access, visualize and subset TROPOMI data.

TROPOMI↗
NASA NTRS2014

Proto-Examples of Data Access and Visualization Components of a Potential Cloud-Based GEOSS-AI System

Once a research or application problem has been identified, one logical next step is to search for available relevant data products. Thus, an early component of a potential GEOSS-AI system, in the continuum between observations and end point research, applications, and decision making, would be one that enables transparent data discovery and access by users. Such a component might be effected via the systems data agents. Presumably, some kind of data cataloging has already been implemented, e.g., in the GEOSS Common Infrastructure (GCI). Both the agents and cataloging could also leverage existing resources external to the system. The system would have some means to accept and integrate user-contributed agents. The need or desirability for some data format internal to the system should be evaluated. Another early component would be one that facilitates browsing visualization of the data, as well as some basic analyses.Three ongoing projects at the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) provide possible proto-examples of potential data access and visualization components of a cloud-based GEOSS-AI system. 1. Reorganizing data archived as time-step arrays to point-time series (data rods), as well as leveraging the NASA Simple Subset Wizard (SSW), to significantly increase the number of data products available, at multiple NASA data centers, for production as on-the-fly (virtual) data rods. SSWs data discovery is based on OpenSearch. Both pre-generated and virtual data rods are accessible via Web services. 2. Developing Web Feature Services to publish the metadata, and expose the locations, of pre-generated and virtual data rods in the GEOSS Portal and enable direct access of the data via Web services. SSW is also leveraged to increase the availability of both NASA and non-NASA data.3.Federating NASA Giovanni (Geospatial Interactive Online Visualization and Analysis Interface), for multi-sensor data exploration, that would allow each cooperating data center, currently the NASA Distributed Active Archive Centers (DAACs), to configure its own Giovanni deployment, while also allowing all the deployments to incorporate each others data. A federated Giovanni comprises Giovanni Virtual Machines, which can be run on local servers or in the cloud.

access↗
NASA NTRS2001

Studies of Antarctic Sea Ice Concentrations from Satellite Data and Their Applications

Large changes in the sea ice cover have been observed recently. Because of the relevance of such changes to climate change studies it is important that key ice concentration data sets used for evaluating such changes are interpreted properly. High and medium resolution visible and infrared satellite data are used in conjunction with passive microwave data to study the true characteristics of the Antarctic sea ice cover, assess errors in currently available ice concentration products, and evaluate the applications and limitations of the latter in polar process studies. Cloud-free high resolution data provide valuable information about the natural distribution, stage of formation, and composition of the ice cover that enables interpretation of the large spatial and temporal variability of the microwave emissivity of Antarctic sea ice. Comparative analyses of co-registered visible, infrared and microwave data were used to evaluate ice concentrations derived from standard ice algorithms (i.e., Bootstrap and Team) and investigate the 10 to 35% difference in derived values from large areas within the ice pack, especially in the Weddell Sea, Amundsen Sea, and Ross Sea regions. Landsat and OLS data show a predominance of thick consolidated ice in these areas and show good agreement with the Bootstrap Algorithm. While direct measurements were not possible, the lower values from the Team Algorithm results are likely due to layering within the ice and snow and/or surface flooding, which are known to affect the polarization ratio. In predominantly new ice regions, the derived ice concentration from passive microwave data is usually lower than the true percentage because the emissivity of new ice changes with age and thickness and is lower than that of thick ice. However, the product provides a more realistic characterization of the sea ice cover, and are more useful in polar process studies since it allows for the identification of areas of significant divergence and polynya activities. Also, heat and salinity fluxes are proportionately increased in these areas compared to those from the thicker ice areas. A slight positive trend in ice extent and area from 1978 through 2000 is observed consistent with slight continental cooling during the period. However, the confidence in this result is only moderate because the overlap period for key instruments is just one month and the sensitivity to changes in sensor characteristics, calibration and threshold for the ice edge is quite high.

Comiso, Josefino C.↗
NASA NTRS1978

Global crop production forecasting - A simulation analysis of the data system problems and their solutions

Alternative data systems for a global crop production forecasting system were studied with the aid of a unique simulation facility called the Data System Dynamic Simulator (DSDS). Information system requirements were determined and compared with existing and planned data systems, and deficiencies were identified and analyzed. A first step was to determine the data load for an operational global crop production forecasting system as a function of data frequency, crop types, biophases, cloud coverage, and number of satellites. The DSDS was used to correlate the interrelated influence of orbital parameters, crop calendars, and cloud conditions to generate global data loading profiles. Some of the more important conclusions and the main features of the simulation system are presented.

Golden, H.↗
NASA NTRS1998

LASE validation experiment: preliminary processing of relative humidity from LASE derived water vapor in the middle to upper troposphere

Lidar Atmospheric Sensing Experiment (LASE) is the first fully engineered, autonomous airborne DIAL (Differentials Absorption Lidar) system to measure water vapor, aerosols, and clouds throughout the troposphere. This system uses a double-pulsed Ti:sapphire laser, which is pumped by a frequency-doubled flashlamp-pumped Nd: YAG laser, to transmit light in the 815 mn absorption band of water vapor. LASE operates by locking to a strong water vapor line and electronically tuning to any spectral position on the absorption line to choose the suitable absorption cross-section for optimum measurements over a range of concentrations in the atmosphere. During the LASE Validation Experiment, which was conducted over Wallops Island during September, 1995, LASE operated on either the strong water line for measurements in middle to upper troposphere, or on the weak water line for measurements made in the middle to lower troposphere including the boundary layer. Comparisons with water vapor measurements made by airborne dew point and frost point hygrometers, NASA/GSFC (Goddard Space Flight Center) Raman Lidar, and radiosondes showed the LASE water vapor mixing ratio measurements to have an accuracy of better than 6% or 0.01 g/kg, whichever is larger, throughout the troposphere. In addition to measuring water vapor mixing ratio profiles, LASE simultaneously measures aerosol backscattering profiles at the off-line wavelength near 815 nm from which atmospheric scattering ratio (ASR) profiles are calculated. ASR is defined as the ratio of total (aerosol + molecular) atmospheric scattering to molecular scattering. Assuming a region with very low aerosol loading can be identified, such as that typically found just below the tropopause, then the ASR can be determined. The ASR profiles are calculated by normalizing the scattering in the region containing enhanced aerosols to the expected scattering by the "clean" atmosphere at that altitude. Images of the total ASR clearly depict cloud regions, including multiple cloud layers, thin upper level cirrus, etc., throughout the troposphere. New data products that are being derived from the LASE aerosol and water measurements include: 1) aerosol extinction coefficient, 2) aerosol optical thickness, 3) precipitable water vapor, and 4) relative humidity (RH). These products can be compared with airborne in-situ, and ground and satellite remote sensing measurements,. This paper presents a preliminary examination of RH profiles in the middle to upper troposphere that are generated from LASE measured water vapor mixing ratio profiles coupled with rawinsonde profiles of temperature and pressure.

Brackett, Vincent G.↗