Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Topotactic synthesis of Co{sub 3}O{sub 4} nanoboxes from Co(OH){sub 2} nanoflakes

Hollow nanocubes of spinel Co{sub 3}O{sub 4} with the dimension of 20 nm were successfully prepared via a facile and reproducible solvothermal route. The structure and morphology of Co{sub 3}O{sub 4} nanoboxes were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and high-resolution transmission electron microscope (HRTEM) techniques. And a possible growth mechanism of Co{sub 3}O{sub 4} nanoboxes were suggested that solid Co{sub 3}O{sub 4} nanocubes nucleate in-situ and grow epitaxially from hexagonal {beta}-Co(OH){sub 2} precursors with the structural matching relationship of [0 0 1] {beta}-Co(OH){sub 2}//[1 1 1] Co{sub 3}O{sub 4}, and then solid Co{sub 3}O{sub 4} nanocubes gradually hollow and convert to single-crystal nanoboxes owing to Ostwald ripening. - Graphical abstract: The formation mechanism of Co{sub 3}O{sub 4} nanoboxes can be expressed as epitaxial growth of Co{sub 3}O{sub 4} nanocubes from {beta}-Co(OH){sub 2} nanoflakes due to a topotactic transformation and hollowing process owing to Ostwald ripening. Highlights: > Co{sub 3}O{sub 4} nanoboxes were prepared by a convenient, economical and controllable hydrothermal route. > Morphology and structure of Co{sub 3}O{sub 4} nanoboxes were characterized by XRD, SEM, and TEM techniques. > Co{sub 3}O{sub 4} nanoboxes grow epitaxially from Co(OH){sub 2} by topotactic transformation was suggested.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sintering and crystallization behavior of CaMgSi{sub 2}O{sub 6}-NaFeSi{sub 2}O{sub 6} based glass-ceramics

We report on the synthesis, sintering, and crystallization behaviors of a glass with a composition corresponding to 90 mol % CaMgSi{sub 2}O{sub 6}-10 mol % NaFeSi{sub 2}O{sub 6}. The investigated glass composition crystallized superficially immediately after casting of the melt and needs a high cooling rate (rapid quenching) in order to produce an amorphous glass. Differential thermal analysis and hot-stage microscopy were employed to investigate the glass forming ability, sintering behavior, relative nucleation rate, and crystallization behavior of the glass composition. The crystalline phase assemblage in the glass-ceramics was studied under nonisothermal heating conditions in the temperature range of 850-950 deg. C in both air and N{sub 2} atmosphere. X-ray diffraction studies adjoined with the Rietveld-reference intensity ratio method were employed to quantify the amount of crystalline phases, while electron microscopy was used to shed some light on the microstructure of the resultant glass-ceramics. Well sintered glass-ceramics with diopside as the primary crystalline phase were obtained where the amount of diopside varied with the heating conditions.

36 MATERIALS SCIENCE↗

[Zr{sub 0.72}Y{sub 0.28}]Al{sub 4}C{sub 4}: A new member of the homologous series (MC){sub l}(T{sub 4}C{sub 3}){sub m} (M=Zr, Y and Hf, T=Al, Si and Ge)

A new layered carbide, [Zr{sub 0.72(3)}Y{sub 0.28(3)}]Al{sub 4}C{sub 4}, has been synthesized and characterized by X-ray powder diffraction, transmission electron microscopy and energy dispersive X-ray spectroscopy (EDX). The atom ratios [Zr:Y] were determined by EDX, and the initial structure model was derived by the direct methods, and further refined by Rietveld method. The crystal is trigonal (space group P3-barm1, Z=1) with lattice dimensions of a=0.333990(5) nm, c=1.09942(1) nm and V=0.106209(2) nm{sup 3}. This compound shows an intergrowth structure with [Zr{sub 0.72}Y{sub 0.28}C{sub 2}] thin slabs separated by Al{sub 4}C{sub 3}-type [Al{sub 4}C{sub 4}] layers. It is a new member with l=1 and m=1 of the homologous series, the general formula of which is (MC){sub l}(T{sub 4}C{sub 3}){sub m} (l=1, 2 and 3, m=1 and 2, M=Zr, Y and Hf, T=Al, Si and Ge). - Graphical Abstract: The layered carbide (Zr{sub 0.72}Y{sub 0.28}C)Al{sub 4}C{sub 3} has been synthesized and found to be a new member with l=1 and m=1 of the homologous series (MC){sub l}(T{sub 4}C{sub 3}){sub m} (l=1, 2 and 3, m=1 and 2, M=Zr, Y and Hf, T=Al, Si and Ge).

36 MATERIALS SCIENCE↗

Large-scale controllable synthesis of dumbbell-like BiVO{sub 4} photocatalysts with enhanced visible-light photocatalytic activity

The controllable synthesis of novel dumbbell-like BiVO{sub 4} hierarchical nanostructures has been successfully obtained via a simple hydrothermal route. The as-synthesized products were studied by X-ray powder diffraction, scanning electron microscopy, transmission electron microscopy and UV-vis absorption spectroscopy. The results showed that the nucleation and growth of the nanodumbbells were governed by an oriented aggregation growth mechanism. It is noteworthy that the concentration of poly(vinyl pyrrolidone) and the volume ratio of H{sub 2}O to CH{sub 3}COOH were crucial to the growth of the final nanoarchitectures. Control experiments were also carried out to investigate the factors which impact on the morphology of the products. Furthermore, the as-prepared BiVO{sub 4} hierarchical nanostructures demonstrated the superior visible-light-driven photocatalytic efficiency, which is helpful for the separation and recycle considering their promising applications in harmful pollutants disposal. - Graphical Abstract: The controllable synthesis of novel dumbbell-like BiVO{sub 4} hierarchical nanostructures has been successfully obtained via a simple hydrothermal route; the as-prepared BiVO{sub 4} hierarchical nanostructures demonstrated the superior visible-light-driven photocatalytic efficiency. Highlights: Black-Right-Pointing-Pointer Dumbbell-like BiVO{sub 4} structures were synthesized and characterized for the first time. Black-Right-Pointing-Pointer The volume ratios of H{sub 2}O to CH{sub 3}COOH were crucial to the final morphologies. Black-Right-Pointing-Pointer Their photocatalytic activity was up to 90% under visible-light irradiation. Black-Right-Pointing-Pointer Dumbbell-like BiVO{sub 4} structures may utilize the pollutant disposal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simple synthesis of mesoporous boron nitride with strong cathodoluminescence emission

Mesoporous BN was prepared at 550 {sup o}C for 10 h or so via a simple reaction between NaBH{sub 4} and CO(NH{sub 2}){sub 2}. X-ray diffraction demonstrates the formation of t-BN with lattice constants a=2.46 and c=6.67 A. High-resolution transmission electron microscopy displays a lot of porous films in the product, which possesses a high surface area of 219 m{sup 2} g{sup -1} and a pore size primarily around 3.8 nm tested by nitrogen adsorption-desorption method. The mesoporous BN exhibits a strong luminescence emission around 3.41 eV in the cathodoluminescence spectra, a high stability in both morphology and structure, and good oxidation resistance up to 800 {sup o}C. The byproducts generated during the reaction are responsible for the formation of the mesoporous BN. -- Graphical abstract: The mesoporous BN with a high specific surface area of 219 m{sup 2} g{sup -1} exhibits a strong luminescence emission around 3.41 eV in the CL spectra, high thermal stability in both morphology and structure, and good oxidation resistance up to 800 {sup o}C. Display Omitted Research highlights: Mesoporous BN was prepared by a simple reaction between NaBH{sub 4} and CO(NH{sub 2}){sub 2} at 550 {sup o}C. The mesoporous BN possesses a high surface area of 219 m{sup 2} g{sup -1}. The mesoporous BN exhibits a strong luminescence emission around 3.41 eV. The mesoporous BN has high stability and good oxidation resistance up to 800 {sup o}C.

36 MATERIALS SCIENCE↗

Field emission of vertically aligned V{sub 2}O{sub 5} nanowires on an ITO surface prepared with gaseous transport

Growing V{sub 2}O{sub 5} nanowires (NWs) on a conducting glass substrate combines gaseous transport and pyrolytic deposition of vanadium polyoxometalate anions, and yields vertically aligned vanadium-oxide nanowires. Scanning electron and transmission electron microscopy, selected-area electron diffraction, Raman spectra and powder X-ray analyses indicate that V{sub 2}O{sub 5} nanowires as synthesized were single-crystalline and grew anisotropically among direction [010]. NH{sub 2}OH.HCl served not only as a reducing agent to produce vanadium polyoxometalate clusters but also as a source of NH{sub 3} gas to facilitate the vapor pyrolysis and deposition. The optical properties of V{sub 2}O{sub 5} nanowires exhibit a character dependent on structure. Field emission (FE) measurements show a small turn-on field voltage approx8.3 V/{mu}m, maximum current density 1.8 mA/cm{sup 2}, and a linear Fowler-Nordheim behavior. - Graphical abstract: Growing V{sub 2}O{sub 5} nanowires on a conducting glass substrate combines gaseous transport and pyrolytic deposition of vanadium polyoxometalate anions, and yields vertically aligned vanadium-oxide nanowires.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

TiO{sub 2}/carbon nanotube hybrid nanostructures: Solvothermal synthesis and their visible light photocatalytic activity

MWCNT/TiO{sub 2} hybrid nanostructures were prepared via solvothermal synthesis and sol-gel method with benzyl alcohol as a surfactant. As-prepared hybrid materials were characterized by X-ray diffraction, transmission electron microscopy, UV-vis diffuse reflectance spectra and X-ray photoelectron spectroscopy. The results showed that MWCNTs were uniformly decorated with anatase nanocrystals in solvothermal condition, but MWCNTs were embedded in a majority of TiO{sub 2} nanoparticles by sol-gel method. When the weight ratio of MWCNTs to TiO{sub 2} was 20%, MWCNT/TiO{sub 2} hybrid nanostructures prepared by solvothermal synthesis exhibited higher visible-light-driven photocatalytic activity than that prepared by sol-gel method. Post-annealing of MWCNT/TiO{sub 2} nanostructures at 400 deg. C resulted in the formation of the carbonaceous Ti-C bonds on the interface between TiO{sub 2} and MWCNTs, which enhanced the photoabsorbance of the hybrid materials in the visible light region and improved the visible-light degradation efficiency of methylene blue. - Graphical abstract: MWCNT/TiO{sub 2} nanostructures have been prepared by solvothermal method, which exhibited higher visible-light-driven photocatalytic activity than that prepared by sol-gel method. The carbonaceous Ti-C bonds on the interface between TiO{sub 2} and MWCNTs enhanced the photoabsorbance of the hybrid materials in the visible light region. Highlights: > Anatase TiO{sub 2} nanoparticles were anchored on CNTs surface uniformly via solvothermal method {yields} The morphology facilitated the electron transfer between CNTs and TiO{sub 2} {yields} Ti-C bonds extended the absorption of MWCNT/TiO{sub 2} to the whole visible light region. > The hybrid nanostructures showed enhanced visible-light induced photocatalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-confined GaN heterophased quantum wells

Wurtzite/zinc-blende/wurtzite GaN heterophased quantum wells (QWs) were grown by plasma-assisted molecular beam epitaxy. A self-assembling mechanism was used to simulate the heterophased QW, in which a wurtzite/zinc-blende phase transition was created by rotating the threefold symmetric N-Ga vertical bond 60 deg. The GaN heterophased QW was attested by transmission electron microscopy, selective area electron diffraction and cathodoluminescence measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

InN/InGaN multiple quantum wells emitting at 1.5 {mu}m grown by molecular beam epitaxy

This work reports on the growth by molecular beam epitaxy and characterization of InN/InGaN multiple quantum wells (MQWs) emitting at 1.5 {mu}m. X-ray diffraction (XRD) spectra show satellite peaks up to the second order. Estimated values of well (3 nm) and barrier (9 nm) thicknesses were derived from transmission electron microscopy and the fit between experimental data and simulated XRD spectra. Transmission electron microscopy and XRD simulations also confirmed that the InGaN barriers are relaxed with respect to the GaN template, while the InN MQWs grew under biaxial compression on the InGaN barriers. Low temperature (14 K) photoluminescence measurements reveal an emission from the InN MQWs at 1.5 {mu}m. Measurements as a function of temperature indicate the existence of localized states, probably due to InN quantum wells' thickness fluctuations as observed by transmission electron microscopy.

36 MATERIALS SCIENCE↗

Titania-lanthanum phosphate photoactive and hydrophobic new generation catalyst

Titania-lanthanum phosphate nanocomposites with multifunctional properties have been synthesized by aqueous sol-gel method. The precursor sols with varying TiO{sub 2}:LaPO{sub 4} ratios were applied as thin coating on glass substrates in order to be transparent, hydrophobic, photocatalytically active coatings. The phase compositions of the composite powders were identified by powder X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM). The anatase phase of TiO{sub 2} in TiO{sub 2}-LaPO{sub 4} composite precursors was found to be stable even on annealing at 800 deg. C. The glass substrates, coated with TL1 (TiO{sub 2}-LaPO{sub 4} composition with 1 mol% LaPO{sub 4}) and TL50 (composite precursor containing TiO{sub 2} and LaPO{sub 4} with molar ratio 1:1) sols and annealed at 400 deg. C, produced contact angles of 74 deg. and 92 deg., respectively, though it is only 62 deg. for pure TiO{sub 2} coating. The glass substrates, coated with TL50 sol, produced surfaces with relatively high roughness and uneven morphology. The TL1 material, annealed at 800 deg. C, has shown the highest UV photoactivity with an apparent rate constant, k{sub app}=24x10{sup -3} min{sup -1}, which is over five times higher than that observed with standard Hombikat UV 100 (k{sub app}=4x10{sup -3} min{sup -1}). The photoactivity combined with a moderate contact angle (85.3 deg.) shows that this material has a promise as an efficient self-cleaning precursor. - Graphical abstract: Multifunctional TiO{sub 2}-LaPO{sub 4} composite stabilizes anatase phase with enhanced photocatalytic activity, and moderately higher hydrophobicity is a promising material for self-cleaning application. Highlights: > Titania-lanthanum phosphate nanocomposites were synthesized by aqueous sol-gel method. > Transparent, hydrophobic, photoactive coatings were developed on glass substrates. > The glass substrates, coated with TL1 annealed at 400 deg. C, produced a contact angle of 74 deg. > The TL1 material at 800 deg. C has shown the highest UV photoactivity (k{sub app}=24x10{sup -3} min{sup -1}). > Photoactivity and moderate contact angle show that this is an efficient self-cleaning precursor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13}: A new member of the A{sub n}B{sub n}O{sub 3n-2} anion-deficient perovskite-based homologous series

Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13}, a new n=5 member of the anion-deficient perovskite based A{sub n}B{sub n}O{sub 3n-2} (A=Pb, Ba, B=Fe, Sn) homologous series, was synthesized by the solid state method. The crystal structure of Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13} was investigated using a combination of neutron powder diffraction, electron diffraction, high angle annular dark field scanning transmission electron microscopy and Moessbauer spectroscopy. It crystallizes in the Ammm space group with unit cell parameters a=5.7990(1) A, b=4.04293(7) A and c=26.9561(5) A. The Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13} structure consists of quasi two-dimensional perovskite blocks separated by 1/2[110](1-bar 01){sub p} crystallographic shear (CS) planes. The corner-sharing FeO{sub 6} octahedra at the CS planes are transformed into edge-sharing FeO{sub 5} distorted tetragonal pyramids. The octahedral positions in the perovskite blocks between the CS planes are jointly taken up by Fe and Sn, with a preference of Sn towards the position at the center of the perovskite block. The chains of FeO{sub 5} pyramids and (Fe,Sn)O{sub 6} octahedra of the perovskite blocks delimit six-sided tunnels at the CS planes occupied by double chains of Pb atoms. The compound is antiferromagnetically ordered below T{sub N}=368{+-}15 K. Highlights: Black-Right-Pointing-Pointer Compound Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13} was synthesized and characterized for the first time. Black-Right-Pointing-Pointer It is a new member of the anion-deficient perovskite based homologous series A{sub n}B{sub n}O{sub 3n-2} with n=5. Black-Right-Pointing-Pointer Its structure consists of quasi two-dimensional perovskite blocks separated by interfaces. Black-Right-Pointing-Pointer Interfaces are made up of edge-sharing FeO{sub 5} distorted tetragonal pyramids. Black-Right-Pointing-Pointer Pb{sub 2.85}Ba{sub 2.15}Fe{sub 4}SnO{sub 13} is antiferromagnetically ordered below T{sub N}=368{+-}15 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Critical shell thickness for InAs-Al{sub x}In{sub 1-x}As(P) core-shell nanowires

InAs nanowires with Al{sub x}In{sub 1-x}P or Al{sub x}In{sub 1-x}As shells were grown on GaAs substrates by the Au-assisted vapour-liquid-solid method in a gas source molecular beam epitaxy system. Core diameters and shell thicknesses were measured by transmission electron microscopy (TEM). These measurements were then related to selected area diffraction patterns to verify either interface coherency or relaxation through misfit dislocations. A theoretical strain model is presented to determine the critical shell thickness for given core diameters. Zincblende stiffness parameters are transformed to their wurtzite counterparts via a well known tensor transformation. An energy criterion is then given to determine the shell thickness, at which coherency is lost and dislocations become favourable. Our model only considers axial strain relieved by edge dislocations since they were the only type of dislocation observed directly by TEM.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Crystallization of niobium germanosilicate glasses

Niobium germanosilicate glasses are potential candidates for the fabrication of transparent glass ceramics with interesting non-linear optical properties. A series of glasses in the (Ge,Si)O{sub 2}-Nb{sub 2}O{sub 5}-K{sub 2}O system were prepared by melting and casting and their characteristic temperatures were determined by differential thermal analysis. Progressive replacement of GeO{sub 2} by SiO{sub 2} improved the thermal stability of the glasses. Depending on the composition and the crystallization heat-treatment, different nanocrystalline phases-KNbSi{sub 2}O{sub 7}, K{sub 3}Nb{sub 3}Si{sub 2}O{sub 13} and K{sub 3.8}Nb{sub 5}Ge{sub 3}O{sub 20.4} could be obtained. The identification and characterization of these phases were performed by X-ray diffraction and Raman spectroscopy. The 40 GeO{sub 2}-10 SiO{sub 2}-25 Nb{sub 2}O{sub 5}-25 K{sub 2}O (mol%) composition presented the higher ability for volume crystallization and its nucleation temperature was determined by the Marotta's method. An activation energy for crystal growth of {approx}529 kJ/mol and a nucleation rate of 9.7x10{sup 18} m{sup -3} s{sup -1} was obtained, for this composition. Transparent glass ceramics with a crystalline volume fraction of {approx}57% were obtained after a 2 h heat-treatment at the nucleation temperature, with crystallite sizes of {approx}20 nm as determined by transmission electron microscopy. - Abstract: TEM image and XRD pattern of the glass ceramic produced (circles indicate nanocrystals).

36 MATERIALS SCIENCE↗

Simple synthesis of ultra-long Ag{sub 2}Te nanowires through solvothermal co-reduction method

Ultra-long single crystal {beta}-Ag{sub 2}Te nanowires with the diameter of about 300 nm were fabricated through a solvothermal route in ethylene glycol (EG) system without any template. The long single crystal wires were curves, with high purity, well-crystallized, and dislocation-free and characterized by using X-ray powder diffraction (XRD), Differential scanning calorimetry (DSC) analysis, X-ray photoelectron spectroscope (XPS), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and high-resolution transmission microscopy (HRTEM). The detailed topotactic transformation process from particles into single crystal wires was studied. Furthermore, the electrical conductivity and Seebeck coefficient have been systematically studied between 300 and 600 K. - Graphical abstract: Ultra-long single crystal {beta}-Ag{sub 2}Te nanowires with the diameter of about 300 nm were fabricated by the solvothermal route in ethylene glycol (EG) system without any template. The diagram displays the variation of the phases and morphologies of products with different reaction time.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Special fractal growth of dendrite copper using a hydrothermal method

Special fractal dendrite Cu nanostructures have been synthesized through a simple hydrothermal method, and the effects of the volume ratio between glycerol and water and the concentration of H{sub 3}PO{sub 3} on the morphologies of dendrite Cu have been studied in detail. The Field emission scanning electron microscopy (FESEM), Transmission electron microscopy (TEM) and X-ray diffraction (XRD) have been used to characterize these Cu products. The results indicate that rhombic diamond and different morphologies of fractal dendrite were prepared because of the accumulation of Cu nuclei based on the diffusion-limited aggregation (DLA) and the nucleation-limited aggregation (NLA) model. Fortunately, symmetrical leaf-like dendrite Cu nanostructures different from Cu dendrites reported before have been obtained. Additionally, an explanation for the growth of fractal dendrite Cu has been discussed carefully. - Graphical abstract: Uniform dendritic Cu are grown through controlling V{sub glycerol/water} in range of 0.6-1.2 and the concentration of H{sub 3}PO{sub 3} in range of 0.06-0.3 M. The rhombic cluster Cu are obtained by decreasing the amount of glycerol. Highlights: > Volume ratio of glycerol/water and concentration of H{sub 3}PO{sub 3} were varied, respectively. > Morphologies of dendritic Cu have some changes. > Leaf-like and rhombic cluster Cu were obtained. > The concentration changes affect the aggregation of Cu crystallites. > The aggregation and crystallographic orientation cause leaf-like Cu nanostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

SiO{sub 2} nanospheres with tailorable interiors by directly controlling Zn{sup 2+} and NH{sub 3}.H{sub 2}O species in an emulsion process

SiO{sub 2} nanospheres with tailorable interiors were synthesized by a facile one-spot microemulsion process using TEOS as silica source, wherein cyclohexane including triton X-100 and n-octanol as oil phase and Zn{sup 2+} or NH{sub 3}.H{sub 2}O aqueous solution as dispersive phase, respectively. The products were characterized by Scanning Electron Microscopy, Transmission Electron Microscopy and X-ray Powder Diffraction. It was suggested that the as-synthesized silica nanospheres possessed grape-stone-like porous or single hollow interior, and also found that the ammonia dosage and aging time played key roles in controlling the size and structure of silica nanospheres. Furthermore, the comparative results confirmed that in-situ zinc species [ZnO/Zn(OH){sub 2}] acted as the temporary templates to construct grape-stone-like interior, and a simultaneously competing etching process occurred owing to the soluble Zn(NH{sub 3}){sub 4}{sup 2+} complex formation while the additional excessive ammonia was introduced. With the aging time being extended, the in-situ nanocrystals tended to grow into bigger ones by Ostwald Ripening, producing single hollow interior. - Graphical Abstract: Formation process of SiO{sub 2} nanospheres with porous and single hollow interior. Highlights: > ZnO/Zn(OH){sub 2} nanocrystals as the temporary templates shape the interior structures of SiO{sub 2} nanospheres. > Fabrication of porous and single hollow interiors needs no additional processes such as roasting or dissolving. > Tailorable interiors can be easily obtained through adjusting the aging time of temporary templates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallization of sputtered-deposited and ion implanted amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films

X-ray diffraction and transmission electron microscopy have been utilized to measure the ion irradiation-induced modification in amorphous Ge{sub 2}Sb{sub 2}Te{sub 5} thin films. The isothermal crystallization of sputtered-deposited and Sb{sup +} ion irradiated amorphous samples has been studied, focusing on the evolution of the microstructure during the initial stage of the transformation. In both samples, the amorphous to crystal transition occurs through the nucleation of face centered cubic (fcc) crystal domains at the film surface. A fast bidimensional growth of the crystalline nuclei in the sputtered-deposited films occurs by the generation of transrotational grains. The lattice parameter decreases as the crystalline fraction increases above 80%, and it approaches the fcc bulk value at the end of the transformation. Ion irradiation produces a densification of the deposited amorphous film (approx4% vertical shrinkage measured by atomic force microscopy) and an enhancement of the crystallization rate. Even in the irradiated amorphous, the nucleation occurs at the film surface and proceeds by the growth of the grains through the thickness of the layer although the density of the transrotational grains is strongly reduced with respect to the unirradiated amorphous. A link between the ion beam induced densification and the reduction of transrotational grains is proposed.

36 MATERIALS SCIENCE↗