Search NASA⌕ Search

SEARCH · Search NASA

Results for “comets dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Dynamic Finite Element Predictions for Mars Sample Return Cellular Impact Test #4

The nonlinear, transient dynamic finite element code, MSC.Dytran, was used to simulate an impact test of an energy absorbing Earth Entry Vehicle (EEV) that will impact without a parachute. EEVOs are designed to return materials from asteroids, comets, or planets for laboratory analysis on Earth. The EEV concept uses an energy absorbing cellular structure designed to contain and limit the acceleration of space exploration samples during Earth impact. The spherical shaped cellular structure is composed of solid hexagonal and pentagonal foam-filled cells with hybrid graphite-epoxy/Kevlar cell walls. Space samples fit inside a smaller sphere at the center of the EEVOs cellular structure. Pre-test analytical predictions were compared with the test results from a bungee accelerator. The model used to represent the foam and the proper failure criteria for the cell walls were critical in predicting the impact loads of the cellular structure. It was determined that a FOAM1 model for the foam and a 20% failure strain criteria for the cell walls gave an accurate prediction of the acceleration pulse for cellular impact.

Fasanella, Edwin L.↗

Solar wind effects on the outer ion coma of Comet Halley

A simple two-dimensional model is developed to examine the composition of the cometary ion coma in the region outside the ionopause which is strongly affected by the solar wind. Two-dimensional ion distributions are obtained assuming a cylindrically symmetric ion coma which accounts for the dynamic effects of the mass-loaded solar wind flow around the cometary ionosphere. The results of this model are discussed in the context of analyzing the GIOTTO ion data.

Flammer, K. R.↗

The Cosmic Dust Collection Facility on Space Station Freedom

The Cosmic Dust Collection Facility is an attached payload on board the Freedom Station that will serve as a long-term observatory of all dust-sized particles, typically of much less than 1 mm, either natural or man-made. Its instruments will measure the trajectories of individual hypervelocity particles and will trap the fragmented, melted or vaporized impactor residues in suitable capture media. The latter will be periodically returned to earth for detailed mineralogic and chemical characterization of these residues. The trajectory information will permit reconstruction of the astrophysical source(s) of natural dust grains, such that the compositional information may serve as proxy-analysis of primitive solar system objects among which comets and asteroids are known to be the most prolific dust sources. Trajectory information and chemical composition of man-made particles will yield clues about the most prolific anthropogenic sources. Direct measurement of the dynamic properties of all particles will contribute substantially toward an understanding of the collisional hazards to current and future space operations in LEO.

Horz, Friedrich↗

NASA Tech Briefs, July 2011

Topics covered include: 1) Collaborative Clustering for Sensor Networks; 2) Teleoperated Marsupial Mobile Sensor Platform Pair for Telepresence Insertion Into Challenging Structures; 3) Automated Verification of Spatial Resolution in Remotely Sensed Imagery; 4) Electrical Connector Mechanical Seating Sensor; 5) In Situ Aerosol Detector; 6) Multi-Parameter Aerosol Scattering Sensor; 7) MOSFET Switching Circuit Protects Shape Memory Alloy Actuators; 8) Optimized FPGA Implementation of Multi-Rate FIR Filters Through Thread Decomposition; 9) Circuit for Communication Over Power Lines; 10) High-Efficiency Ka-Band Waveguide Two-Way Asymmetric Power Combiner; 11) 10-100 Gbps Offload NIC for WAN, NLR, and Grid Computing; 12) Pulsed Laser System to Simulate Effects of Cosmic Rays in Semiconductor Devices; 13) Flight Planning in the Cloud; 14) MPS Editor; 15) Object-Oriented Multi Disciplinary Design, Analysis, and Optimization Tool; 16) Cryogenic-Compatible Winchester Connector Mount and Retaining System for Composite Tubes; 17) Development of Position-Sensitive Magnetic Calorimeters for X-Ray Astronomy; 18) Planar Rotary Piezoelectric Motor Using Ultrasonic Horns; 19) Self-Rupturing Hermetic Valve; 20) Explosive Bolt Dual-Initiated from One Side; 21) Dampers for Stationary Labyrinth Seals; 22) Two-Arm Flexible Thermal Strap; 23) Carbon Dioxide Removal via Passive Thermal Approaches; 24) Polymer Electrolyte-Based Ambient Temperature Oxygen Microsensors for Environmental Monitoring; 25) Pressure Shell Approach to Integrated Environmental Protection; 26) Image Quality Indicator for Infrared Inspections; 27) Micro-Slit Collimators for X-Ray/Gamma-Ray Imaging; 28) Scatterometer-Calibrated Stability Verification Method; 29) Test Port for Fiber-Optic-Coupled Laser Altimeter; 30) Phase Retrieval System for Assessing Diamond Turning and Optical Surface Defects; 31) Laser Oscillator Incorporating a Wedged Polarization Rotator and a Porro Prism as Cavity Mirror; 32) Generic, Extensible, Configurable Push-Pull Framework for Large-Scale Science Missions; 33) Dynamic Loads Generation for Multi-Point Vibration Excitation Problems; 34) Optimal Control via Self-Generated Stochasticity; 35) Space-Time Localization of Plasma Turbulence Using Multiple Spacecraft Radio Links; 36) Surface Contact Model for Comets and Asteroids; 37) Dust Mitigation Vehicle; 38) Optical Coating Performance for Heat Reflectors of the JWST-ISIM Electronic Component; 39) SpaceCube Demonstration Platform; 40) Aperture Mask for Unambiguous Parity Determination in Long Wavelength Imagers; 41) Spaceflight Ka-Band High-Rate Radiation-Hard Modulator; 42) Enabling Disabled Persons to Gain Access to Digital Media; 43) Cytometer on a Chip; 44) Principles, Techniques, and Applications of Tissue Microfluidics; and 45) Two-Stage Winch for Kites and Tethered Balloons or Blimps.

Source record↗

Line Emission Mapper Probing Physics of Cosmic Ecosystems

The Line Emission Mapper (LEM) is an X-ray Probe for the 2030s that will answer the outstanding questions of the Universe’s structure formation. It will also provide transformative new observing capabilities for every area of astrophysics, and to heliophysics and planetary physics as well. LEM’s main goal is a comprehensive look at the physics of galaxy formation, including stellar and black-hole feedback and flows of baryonic matter into and out of galaxies. These processes are best studied in X-rays; as emphasized by the 2020 Decadal Survey, emission-line mapping is the pressing need in this area. LEM will use a large microcalorimeter array/IFU (that builds on Athena XIFU technology developments), covering a 30 × 300 field with 1000 angular resolution, to map the soft Xray line emission from objects that constitute galactic ecosystems. These include supernova remnants, star-forming regions, superbubbles, galactic outflows (such as the Fermi/eROSITA bubbles in the Milky Way and their analogs in other galaxies), the Circumgalactic Medium in the Milky Way and other galaxies, and the Intergalactic Medium at the outskirts and beyond the confines of galaxies and clusters. LEM’s 1–2 eV spectral resolution in the 0.2–2 keV band will make it possible to disentangle the faintest emission lines in those objects from the bright Milky Way foreground, providing groundbreaking measurements of the physics of these plasmas, from temperatures, densities, chemical composition to gas dynamics. While the mission is optimized to provide critical observations that will push our understanding of galaxy formation, LEM will provide transformative capability for all classes of astrophysical objects, from the Earth’s magnetosphere, planets and comets to the interstellar medium and X-ray binaries in nearby galaxies, AGN, and cooling gas in galaxy clusters. In addition to pointed observations, LEM will perform a shallow all-sky survey that will dramatically expand the discovery space.

Ralph Kraft↗

Comparative neutral composition instrumentation and new results

The atmospheres associated with a number of planets and moons have been studied by remote sensing. Direct in-situ measurements have been possible for the earth, moon, Mars, and Venus. Both remote sensing and in-situ instruments are under development for missions to Halley's Comet and Jupiter. Brief descriptions are provided of the more recently employed mass spectrometer systems used in missions to Venus, Mars, and Jupiter. Upper atmosphere instruments are discussed, taking into account the Pioneer Venus Orbiter Neutral Mass Spectrometer, Dynamics Explorer-B Wind and Temperature Spectrometer, and the Pioneer Venus Bus Neutral Mass Spectrometer. Lower atmospshere instruments are also considered, giving attention to a double focusing mass spectrometer of the Nier-Johnson design used in the Viking Lander, Venera instruments, the Pioneer Venus Large Probe Mass spectrometer, and the Galileo Probe Mass Spectrometer.

Niemann, H. B.↗

Dynamics of the DAZd Disks

New observations of DAZ dwarfs suggest that many of these stars---the DAZd subclass---host rings of debris. We will discuss the minerology and dynamics ofthese rings as inferred from models of new mid-infrared spectra and photometry raken with the Spitzer space telescope, I will show that rhe DAZd rings do not need to be recently supplied by a single comet; they can survive for approx. 1 Gyr.

Kuchner, Marc↗

29P/Schwassmann–Wachmann 1: A Rosetta Stone for Amorphous Water Ice and CO↔CO 2 Conversion in Centaurs and Comets?

Centaur 29P/Schwassmann–Wachmann 1 (SW1) is a highly active object orbiting in the transitional "Gateway" region between the Centaur and Jupiter-family comet (JFC) regions. SW1 is unique among the Centaurs in that it experiences quasi-regular major outbursts and produces CO emission continuously; however, the source of the CO is unclear. We argue that, due to its very large size (∼32 km radius), SW1 is likely still responding, via amorphous water ice (AWI) conversion to crystalline water ice (CWI), to the "sudden" change in its external thermal environment produced by its Myrs-long dynamical migration from the Kuiper Belt to its current location at the inner edge of the Centaur region. It is this conversion process that is the source of the abundant CO and dust released from the object during its quiescent and outburst phases. If correct, these arguments have a number of important predictions testable via remote sensing and in situ spacecraft characterization, including the quick release on Myr timescales of CO from AWI conversion for any few kilometer-scale scattered disk Kuiper Belt Objects transiting into the inner system; that to date SW1 has only converted between 50% and 65% of its nuclear AWI to CWI; that volume changes on AWI conversion could have caused subsidence and cave-ins, but not significant mass wasting or crater loss; that SW1's coma should contain abundant amounts of CWI+CO 2 "dust" particles; and that when SW1 transits into the inner system within the next 10,000 yr, it will be a very different kind of JFC.

Centaur 29P/Schwassmann–Wachmann 1(SW1)↗

Ion Thruster Used to Propel the Deep Space 1 Spacecraft to Comet Encounters

The NASA Solar Electric Propulsion Technology Applications Readiness (NSTAR) Project provided a xenon ion propulsion system to the Deep Space 1 (DS1) spacecraft to validate the propulsion system as well as perform primary propulsion for asteroid and comet encounters. The On-Board Propulsion Branch of the NASA Glenn Research Center at Lewis Field developed engineering model versions of the 30-cm-diameter ion thruster and the 2.5-kW power processor unit (PPU). Glenn then transferred the thruster and PPU technologies to Hughes Electron Dynamics and managed the contract, which supplied two flight sets of thrusters and PPU s to the Deep Space 1 spacecraft and to a ground-based life verification test at the Jet Propulsion Laboratory (JPL). In addition to managing the DS1 spacecraft development, JPL was responsible for the NSTAR Project management, thruster life tests, the feed system, diagnostics, and propulsion subsystem integration. The ion propulsion development team included NASA Glenn, JPL, Hughes Electronics, Moog Inc., and Spectrum Astro Inc. The overall NSTAR subsystem dry mass, including thruster, PPU, controller, cables, and the xenon storage and feed system, is 48 kg. The mass of the xenon stored onboard DS1 was about 81 kg, and the spacecraft wet mass was approximately 500 kg.The DS1 spacecraft was launched on October 24, 1998, and on July 29, 1999, it flew within 16 miles of the small asteroid Braille (formerly 1992KD) at a relative speed of 35,000 mph. As of November 1999, the ion propulsion system had performed flawlessly for nearly 149 days of thrusting. NASA has approved an extension to the mission, which will allow DS1 to continue thrusting to encounters with two comets in 2001. The DS1 optical and plasma diagnostic instruments will be used to investigate the comet and space environments. The spacecraft is scheduled to fly past the dormant comet Wilson- Harrington in January 2001 and the very active comet Borrelly in September 2001, at which time approximately 500 days of ion engine thrusting will have been completed.

Sovey, James S.↗

Evolution of large-scale plasma structures in comets: Kinematics and physics

Cometary and solar wind data from December 1985 through April 1986 are presented for the purpose of determining the solar wind conditions associated with comet plasma tail disconnection events (DE's). The cometary data are from The International Halley Watch Atlas of Large-Scale Phenomena (Brandt, Niedner, and Rahe, 1992). In addition, we present the kinematic analysis of 4 DE's, those of Dec. 13.5 and 31.2, 1985, and Feb. 21.7 and 28.7, 1986. The circumstances of these DE's clearly illustrate the need to analyze DE's in groups. In situ solar wind measurements from IMP-8, ICE, and PVO were used to construct the variation of solar wind speed, density, and dynamic pressure during this interval. Data from these same spacecraft plus Vega-1 were used to determine the time of 48 current sheet crossings. These data were fitted to heliospheric current sheet curves extrapolated from the corona into the heliosphere in order to determine the best-fit source surface radius for each Carrington rotation. Comparison of the solar wind conditions and 16 DE's in Halley's comet (the four DE's discussed in this paper and 12 DE's in the literature) leaves little doubt that DE's are associated primarily with crossings of the heliospheric current sheet and apparently not with any other property of the solar wind. If we assume that there is a single or primary physical mechanism and that Halley's DE's are representative, efforts at simulation should concentrate on conditions at current sheet crossings. The mechanisms consistent with this result are sunward magnetic reconnection and tailward magnetic reconnection, if tailward reconnection can be triggered by the sector boundary crossing.

Brandt, John C.↗

The Origins of Plasmas in the Earth's Neighborhood (OPEN) program

The nature and objectives of the OPEN program are overviewed. The Origins of Plasmas in the Earth's Neighborhood program was conceived in 1979 and proposed as a major new initiative to study the energetics of the earth's space environment by the end of the 1980s. The objectives of OPEN have been integrated into the Global Geospace Study (GGS) segment to the International Solar-Terrestrial Physics (ISTP) program now being planned jointly by NASA, ESA, and Japan. The goals will be to develop a global understanding of the flow of energy from the sun through the earth's space environment above the neutral atmosphere and to define the cause and effect relationships between the plasma physics processes that link different regions of this dynamic environment. A network of four spacecraft will be used, each one carrying an instrument complement to characterize the composition and behavior of the upstream solar wind, the high-altitude polar magnetosphere, the equatorial magnetosphere, and the comet-like geomagnetic tail. Multispectral cameras will also be carried to image polar auroras at ultraviolet, visible and X-ray wavelengths. Experimentalists and theorists on the international team will participate.

Alexander, J. K.↗

The in-situ cometary particulate size distribution measured for one comet: P/Halley

The close approach of Giotto to comet Halley during its 1986 apparition offered an opportunity to study the particulate mass distribution to masses of up to one gram. Data acquired by the front end channels of the highly sensitive mass spectrometer PIA and the dust shield detector system, DIDSY, provide definition to the detected distribution as close as 1000 km to the nucleus. Dynamic motion of the particulates after emission leads to a spatial differentiation affecting the size distribution in several forms: (1) ejecta velocity dispersion; (2) radiation pressure; (3) varying heliocentric distance; and (4) anisotropic nucleus emission. Transformation of the in-situ distribution from PIA and DIDSY weighted heavily by the near-nucleus fluxes leads to a presumed nucleus distribution. The data lead to a puzzling distribution at large masses, not readily explained in an otherwise monotonous power law distribution. Although temporal changes in nucleus activity could and do modify the in-situ size distribution, such an explanation is not wholly possible, because the same form is observed at differing locations in the coma where the time of flight from the nucleus greatly varies. Thus neither a general change in comet activity nor spatial variations lead to a satisfactory explanation.

Mcdonnell, J. A. M.↗

The effects of the diffuse radiation fields due to multiple scattering and thermal reradiation by dust on the dynamics and thermodynamics of a dusty cometary atmosphere

A self-consistent model of a dirty, clathrate cometary nucleus is extended to account for diffuse radiation fields caused by multiple scattering and thermal reradiation of the solar continuum by dust. The model is configured to fit conditions expected for the various spacecraft which will encounter Halley's comet at 0.89 AU. The atmosphere is assumed a chemically reactive dust-gas mixture in quasi-steady spherically symmetric expansion. The effect of electron-neutral ion collisions is accounted for, along with rate constants of the various species of clathrate ice particles and radiative transfer of the solar input in the UV, visible and near-IR intervals. The opacity of the circumnuclear dust is projected to be an order of magnitude greater than previous estimates, which severely impacts the potential visibility of the nucleus to the cameras of the flyby satellites.

Marconi, M. L.↗

Has Nemesis' orbit been detected?

The orbital angular momenta of 126 very young comets are calculated from the orbital data of Marsden and Roemer (1982) and analyzed statistically. A large anisotropy is detected in a plane almost perpendicular to the ecliptic and shown to have a characteristic dissipation lifetime of 10-30 Myr. Dynamic evolution computations indicate that the impulse which produced the anisotropy is that of a very slow massive (10-90 Jupiter mass) body, which is bound to the solar system, passed its 15,000-35,000-AU perihelion about 2-15 Myr ago, and has period 5-50 Myr. It is suggested that this body could well be identical to Nemesis, the object proposed to explain mass faunal extinctions.

Delsemme, A. H.↗

Comment on the paper 'On the influx of small comets into the earth's upper atmosphere. I - Observations'

The observations of transient decreases or holes in the EUV dayglow reported by Frank et al. (1986) and attributed to an influx of small comets into the earth atmosphere are discussed critically. The techniques used in acquiring and analyzing the observational data are examined, and it is argued that the decreases are probably instrument artifacts. A critique of the geophysical basis of the comet hypothesis is also included. In a reply by Frank et al., the instrument-artifact argument is rejected, in part on the basis of the statistical properties of the holes observed. Additional observational data are presented in graphs and dynamics Explorer 1 images are analyzed in detail.

Chubb, T. A.↗

Collisional Time Scales in the Kuiper Disk and Their Implications

We explore the rate of collisions among bodies in the present-day Kuiper Disk as a function of the total mass and population size structure of the disk. We find that collisional evolution is an important evolutionary process in the disk as a whole, and indeed, that it is likely the dominant evolutionary process beyond approx. 42 AU, where dynamical instability time scales exceed the age of the solar system. Two key findings we report from this modeling work are: that unless the disk's population structure is sharply truncated for radii smaller than approx. 1-2 km, collisions between comets and smaller debris are occurring so frequently in the disk, and with high enough velocities, that the small body (i.e., KM-class object) population in the disk has probably developed into a collisional cascade, thereby implying that the Kuiper Disk comets may not all be primordial, and that the rate of collisions of smaller bodies with larger 100 less R less 400 km objects (like 1992QB(sub 1) and its cohorts) is so low that there appears to be a dilemma in explaining how QB(sub 1)s could have grown by binary accretion in the disk as we know it. Given these findings, it appears that either the present-day paradigm for the formation of Kuiper Disk is failed in some fundamental respect, or that the present-day disk is no longer representative of the ancient structure from which it evolved. This in turn suggests the intriguing possibility that the present-day Kuiper Disk evolved through a more erosional stage reminiscent of the disks around the stars Beta Pictorus, alpha PsA, and alpha Lyr.

Stern, S. Alan↗

Pre-mare cratering and early solar system history

An evaluation of the application of the high extralunar flux in pre-mare times to more general problems of early solar system history is attempted by combining the results of dynamic studies with lunar chronological data. There is a twofold to fourfold contrast in the integral impact flux between the Apollo 14 and 16 sites and the older mare surfaces. This is judged insufficient to account for the contrasting lithology between these two sites: basalts and soil breccias in the maria, annealed breccias and impact melts in the highlands. Therefore, these rocks and their ages (3.9-4.0 b.y.) are thought to predate the surfaces in which they are found. Estimation of the flux needed to produce these lithologies, and difficulties associated with extrapolating this further back in lunar history give support to the "cataclysm" hypothesis of Tera, Papanastassiou, and Wasserburg. Dynamical studies permit separate evaluation of the possible sources for both the "normal" flux during the first 600 million years of lunar history and the "peak" that apparently occurred 4.0 billion years ago. The most likely sources for the normal flux are comets from the vicinity of Uranus and Neptune. The most promising source for the peak is tidal disruption by Earth or Venus of a Ceres-size asteroid initially in a Mars-crossing orbit. Alternative possibilities are suggested.

Wetherill, G. W.↗

The Trajectory, Orbit and Preliminary Fall Data of the JUNE BOOTID Superbolide of July 23, 2008

The results of the atmospheric trajectory, radiant, orbit and preliminary fall data calculations of an extremely bright slow-moving fireball are presented. The fireball had a -20.7 maximum absolute magnitude and the spectacular long-persistence dust trail (Fig 1 and 2) was observed in a widespread region of Tajikistan twenty eight minutes after sunset, precisely at 14h 45m 25s UT on July 23, 2008. The bolide was first recorded at a height of 38.2 km, and attained its maximum brightness at a height of 35.0 km and finished at a height of 19.6 km. These values are very much in line with other well-known fireballs producing meteorites. The first break-up must have occurred under an aerodynamic pressure Pdyn of about 1.5 MPa, similar to those derived from the study of atmospheric break-ups of previously reported meteorite-dropping bolides. Our trajectory, and dynamic results suggest that one might well expect to find meteorites on the ground in this case. The heliocentric orbit of the meteoroid determined from the observations is very similar to the mean orbit of the June Bootid meteor shower, whose parental comet is 7P/Pons-Winnecke (Lindblad et al. 2003). If the parent was indeed a comet, this has implications for the internal structure of comets, and for the survivability of cometary meteorites.

Konovalova, N. A.↗