Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex oxide interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Hydride Microstructure at the Metal-Oxide Interface of a Zircaloy-4 Fuel Clad from the H.B. Robinson Nuclear Reactor

During nuclear reactor operation, some of the hydrogen that is produced by the water side corrosion is uptaken by cladding. When the uptaken hydrogen content exceeds its solubility limit in the cladding at a specific temperature, it precipitates as hydride particles in the cladding. This process occurs immediately at the metal-oxide interface forming a hydride rim because of the temperature gradient in the cladding. The presence of hydride rim and its microstructure severely reduces the cladding strength and can induce crack initiation and propagation during design basis accidents, transportation, and wet/dry storage. Because hydrides platelets are one of the potent crack initiation sites, microstructural characterization of hydride rim becomes essential to the safe operation of nuclear reactor and spent nuclear fuel retrievability. Therefore, we investigate the hydride rim microstructure at the metal oxide interface using scanning transmission electron microscopy (S/TEM) with Energy Dispersive X-ray Spectroscopy (EDS) that allows for the microstructural and local chemistry characterization of hydride precipitates to be determined, and enables a relationship to be derived on how the precipitate sites are affected by the oxide and their complex stacking behavior of the precipitates.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

pH-Driven Restructuring of Hydration Layers and Cation Adsorption at the Alumina–Water Interface

Oxide−water interfaces underpin ion separations, catalysis, and electrochemical energy technologies, where the electrical double layer (EDL) controls adsorption, transport, and reactivity. However, the molecular-scale links between pHdependent surface protonation, hydration-layer structure, and counterion adsorption remain poorly defined. Here, we combine in situ crystal truncation rod (CTR) and resonant anomalous X-ray reflectivity (RAXR) with streaming potential measurements and ab initio molecular dynamics (AIMD) simulations to resolve the chemical and structural evolution of the EDL at the single-crystal alumina (012)−water interface in 10 mM Rb + over pH 3−12. CTR measurements reveal two distinct adsorbed water layers at ∼2.2 and ∼3.5 Å above the surface. Each water layer shifts toward the substrate at transition pHs near 6.5 and 10.6, respectively, reflecting changes in primary hydration layer structure in response to the deprotonation of bridging and terminal aluminol groups. RAXR shows a 10-fold increase in Rb + coverage and a decrease in mean adsorption height from ∼3.5 to ∼2.7 Å with increasing pH, indicating enhanced counterion binding accompanied by Stern layer contraction. Streaming potential measurements demonstrate that the zeta potential, i.e., the potential at the hydrodynamic shear plane, is positive at pH 3 and becomes negative at pH ≥ 3.5. The negative charge magnitude increases with increasing pH, consistent with progressive surface deprotonation at higher pH. AIMD identifies inner- and outer-sphere Rb+ complexes whose adsorption heights and coordination geometries depend sensitively on the protonation state of surface oxygens, providing atomistic support for the experimentally inferred trends. These measurements establish two discrete, site-specific pH transitions in hydration-layer structure that track aluminol (de)protonation and quantitatively link them to a pH-driven contraction of the Stern layer (increasing Rb + coverage and decreasing adsorption height). This provides a direct structural basis for connecting surface acid−base chemistry to ion binding distances at an oxide−water interface.

Adsorption↗

Beyond Idealized Models of Nanoscale Metal Hydrides for Hydrogen Storage

Metal hydrides are attractive for compact, low-pressure hydrogen storage, yet a foundational understanding of factors governing their thermodynamics and kinetics is still lacking. Predictive modeling from the atomic to the microstructural scale plays a critical role in addressing these gaps, particularly for nanoscale materials, which promise improved performance but are difficult to probe. In this paper, we summarize strategies being developed within the Hydrogen Materials—Advanced Research Consortium (HyMARC) for going beyond conventional models to incorporate more complex physics, more realistic structures, and better approximation of operation conditions in simulations of nanoscale metal hydrides. We highlight four beyond-ideal factors that influence predicted performance: (1) surface anharmonic dynamics, (2) interface and surface energy penalties, (3) mechanical stress under confinement, and (4) the presence of native surface oxide. Approaches for addressing these factors are demonstrated on model materials representative of high-capacity hydrogen storage systems, and implications for understanding performance under operating conditions are discussed.

08 HYDROGEN↗

Develop On-Demand nanoplasmonic Device Concepts in a Semiconductor Compatible Hybrid System. Final Report

This report summarizes the research activities supported by the U.S. Department of Energy grant DE-SC-0010399. The goal of this project is to is to develop an on-demand nanoplasmonic platform that combines emerging oxide nanoelectronics with a low-loss semiconductor-friendly plasmonic materials. Toward this goal, several unique heterostructures formed between complex oxides and 2D layered materials have been developed. Based on these material systems, a set of atomic force microscope (AFM) based techniques have been developed that can allow long-living and reversible material phase transitions to be manipulated in nanoscale at room temperature. Using such technique and through interface coupling, we can effectively tune the plasmon propagations in unconventional plasmonic materials such as graphene and VO 2 . In addition, we also discovered a plethora of novel interface enabled electro-optic effects, including the spatial modulation of light using 2DEG, a giant programmable photothermoelectric effects at room temperature, a light induced superconducting transition, and a tunable giant third order optical nonlinearities. These major results are outlined in this report, along with lists of project participants and products.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

pH-Driven Restructuring of Hydration Layers and Cation Ad-sorption at the Alumina-Water Interface

Oxide-water interfaces underpin ion separation, catalysis, and electrochemical energy technologies, where the electrical double layer (EDL) controls adsorption, transport, and reactivity. Yet, the molecular-scale link between pH-dependent surface protonation, hydration-layer structure, and counter-ion adsorption remains poorly defined. Here, we combine in situ crystal truncation rod (CTR) and resonant anomalous X-ray reflectivity (RAXR) with streaming potential measurements and ab initio molecular dynamics (AIMD) simulations to resolve the chemical and structural evolution of the EDL at the single-crystal alumina (012)-water interface in 10 mM Rb+ over pH 3-12. CTR measurements reveal two distinct adsorbed water layers at ~2.2 and ~3.5 Å above the surface that each shift toward the substrate at transition pHs near 6.5 and 10.6, respectively, directly reflecting changes in primary hydration layer structure in response to the deprotonation of bridging and terminal aluminol groups. RAXR shows a 10-fold increase in Rb+ coverage and a decrease in mean adsorption height from ~3.5 to ~2.7 Å with increasing pH, indicating enhanced counter-ion binding accompanied by Stern layer contraction. Streaming potential measurements demonstrate that the zeta potential, i.e., potential at the hydrodynamic shear plane, is positive at pH 3 and becomes negative at pH ≥3.5. This negative charge magnitude increases with increasing pH, consistent with progressive surface deprotonation at higher pH. AIMD identifies inner- and outer-sphere Rb+ complexes whose adsorption heights and coordination geometries depend sensitively on the protonation state of surface oxygens, providing atomistic support for the experimentally inferred trends. These measurements establish two discrete, site-specific pH transitions in hydration-layer structure that track aluminol (de)protonation and quantitatively link them to a pH-driven contraction of the Stern layer (increasing Rb+ coverage and decreasing adsorption height). This provides a direct structural basis for connecting surface acid-base chemistry to ion binding distances at an oxide-water interface.

Electrical double layer (EDL), Surface protonation↗

Coherent 3D nanostructure of γ-Al{sub 2}O{sub 3}: Simulation of whole X-ray powder diffraction pattern

The structure and nanostructure features of nanocrystalline γ-Al{sub 2}O{sub 3} obtained by dehydration of boehmite with anisotropic platelet-shaped particles were investigated. The original models of 3D coherent nanostructure of γ-Al{sub 2}O{sub 3} were constructed. The models of nanostructured γ-Al{sub 2}O{sub 3} particles were first confirmed by a direct simulation of powder X–Ray diffraction (XRD) patterns using the Debye Scattering Equation (DSE) with assistance of high-resolution transmission electron microscopy (HRTEM) study. The average crystal structure of γ-Al{sub 2}O{sub 3} was shown to be tetragonally distorted. The experimental results revealed that thin γ-Al{sub 2}O{sub 3} platelets were heterogeneous on a nanometer scale and nanometer-sized building blocks were separated by partially coherent interfaces. The XRD simulation results showed that a specific packing of the primary crystalline blocks in the nanostructured γ-Al{sub 2}O{sub 3} particles with formation of planar defects on (001), (100), and (101) planes nicely accounted for pronounced diffuse scattering, anisotropic peak broadening and peak shifts in the experimental XRD pattern. The identified planar defects in cation sublattice seem to be described as filling cation non-spinel sites in existing crystallographic models of γ-Al{sub 2}O{sub 3} structure. The overall findings provided an insight into the complex nanostructure, which is intrinsic to the metastable γ-Al{sub 2}O{sub 3} oxide. - Highlights: • Thin plate-like crystallites of γ-Al{sub 2}O{sub 3} were obtained. • Models of 3D coherent nanostructure of γ-Al{sub 2}O{sub 3} were constructed. • Models were verified by simulating XRD patterns using the Debye Scattering Equation. • Specific broadening of XRD peaks was explained in terms of planar defects. • Primary crystalline blocks in γ-Al{sub 2}O{sub 3} are separated by partially coherent interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aqueous Titania Interfaces

Water–metal oxide interfaces are central to many phenomena and applications, ranging from material corrosion and dissolution to photoelectrochemistry and bioengineering. In particular, the discovery of photocatalytic water splitting on TiO 2 has motivated intensive studies of water-TiO 2 interfaces for decades. So far, a broad understanding of the interaction of water vapor with several TiO 2 surfaces has been obtained. However, much less is known about liquid water–TiO 2 interfaces, which are more relevant to many practical applications. Probing these complex systems at the molecular level is experimentally challenging and is sometimes possible only through computational studies. This review summarizes recent advances in the atomistic understanding, mostly through computational simulations, of the structure and dynamics of interfacial water on TiO 2 surfaces. The main focus is on the nature, molecular or dissociated, of water in direct contact with low-index defect-free crystalline surfaces. The hydroxyls resulting from water dissociation are essential in the photooxidation of water and critically affect the surface chemistry of TiO 2.

density functional theory↗

Dramatic enhancement of fullerene anion formation in polymer solar cells by thermal annealing: Direct observation by electron spin resonance

Using electron spin resonance (ESR), we clarified the origin of the efficiency degradation of polymer solar cells containing a lithium-fluoride (LiF) buffer layer created by a thermal annealing process after the deposition of an Al electrode (post-annealing). The device structure was indium-tin-oxide/ poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate)/poly (3-hexylthiophene):phenyl-C{sub 61}-butyric acid methyl ester (P3HT:PCBM)/LiF/Al. Three samples consisting of quartz/P3HT:PCBM/LiF/Al, quartz/P3HT:PCBM/Al, and quartz/PCBM/LiF/Al were investigated and compared. A clear ESR signal from radical anions on the PCBM was observed after LiF/Al was deposited onto a P3HT:PCBM layer because of charge transfer at the interface between the PCBM and the LiF/Al, which indicated the formation of PCBM{sup −}Li{sup +} complexes. The number of radical anions on the PCBM was enhanced remarkably by the post-annealing process; this enhancement was caused by the surface segregation of PCBM and by the dissociation of LiF at the Al interface by the post-annealing process. The formation of a greater number of anions enhanced the electron scattering, decreased the electron-transport properties of the PCBM molecules, and caused an energy-level shift at the interface. These effects led to degradation in the device performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

LiNi0.8Mn0.1Co0.1O2 Thin Films Prepared by Polymer-Assisted Deposition for the Study of Cathode-Electrolyte Interphases in Lithium-Ion Batteries

High-nickel layered oxide cathodes such as LiNi0.8Mn0.1Co0.1O2 (NMC811) are critical for next-generation lithium-ion batteries (LIBs) due to their superior energy density and reduced reliance on cobalt. However, many Ni-rich cathodes suffer from rapid capacity fade and structural instability originating from complex interfacial reactions at the cathode-electrolyte interface. Traditional composite electrodes exhibit degradation mechanisms that are challenging to quantitatively understand due to additives, including binders and carbon black. In this study, we demonstrate a new synthesis approach for binder- and additive-free NMC811 thin films using polymer-assisted deposition (PAD). PAD-NMC811 are model thin-film cathodes for investigating interfacial phenomena that can be obscured in composite cathodes. Structural and chemical characterization by X-ray diffraction, soft X-ray absorption spectroscopy, and atomic force microscopy show that PAD-NMC811 films possess high phase purity, crystallinity, chemical homogeneity, and morphological uniformity. Electrochemical analyses using cyclic voltammetry and galvanostatic cycling revealed electrochemical behavior consistent with that of composite electrodes, along with a moderate capacity fade indicative of cathode-electrolyte interphase (CEI) formation. Our findings illustrate the effectiveness of PAD synthesis of thin films tailored for detailed mechanistic studies, which offer critical insights into CEI evolution and cathode degradation pathways.

25 ENERGY STORAGE↗

Tutorial review on structure – dendrite growth relations in metal battery anode supports

This tutorial review explains the emerging understanding of the surface and bulk chemistry – electrochemical performance relations in anode supports (aka secondary current collectors, substrates, templates, hosts) for lithium, sodium and potassium metal batteries (LMBs, SMBs or NMBs, and KMBs or PMBs). In relation to each section, the possible future research directions that may yield both new insight and improved cycling behavior are explored. Representative case studies from Li, Na and K metal anode literature are discussed. The tutorial starts with an overview of the solid electrolyte interphase (SEI), covering both the “classic” understanding of the SEI structure and the “modern” insights obtained by site-specific cryogenic stage TEM analysis. Next, the multiple roles of supports in promoting cycling stability are detailed. Without an optimized support architecture, the metal–electrolyte interface becomes geometrically unstable at a lower current density and cycle number. Taking into consideration the available literature on LMBs, SMBs and KMBs, it is concluded that effective architectures are geometrically complex and electrochemically lithiophilic, sodiophilic or potassiophilic, so as to promote conformal electrochemical wetting of the metal during plating/stripping. One way that philicity is achieved is through support oxygen surface chemistry, which yields a reversibly reactive metal–support interface. Examples of this include the well-known oxygen–carbon moieties in reduced graphene oxide (rGO), as well as classic ion battery reversible conversion reaction oxides such as SnO 2 . Unreactive surfaces lead to dewetted island growth of the metal, which is a precursor to dendrites, and possibly to non-uniform dissolution. Surveying the literature on various Li, Na and K metal supports, it is concluded that the key bulk thermodynamic property that will predict electrochemical wetting behavior is the enthalpy of infinite solution (Δ sol H ∞ ) of the metal (solute) into the support (solvent). Large and negative Δ sol H ∞ promotes uniform metal wetting on the support surface, corresponding to relatively low plating overpotential. Positive Δ sol H ∞ promotes dewetted islands and a relatively high overpotential. This simple rule explains a broad range of studies on Li, Na and K metal – support interactions, including the previously reported correlation between mutual solubility and wetting.

25 ENERGY STORAGE↗

Role of Outer-Membrane Cytochromes MtrC and OmcA in the Biomineralization of Ferrihydrite by Shewanella oneidensis MR-1.

In an effort to improve the understanding of electron transfer mechanisms at the microbe-mineral interface, Shewanella oneidensis MR-1 mutants with in-frame deletions of outer membrane cytochrome genes mtrC, omcA, or both, were characterized for the ability to reduce metal oxides using a suite of microscopic, spectroscopic, and biochemicalr techniques. The results indicate that neither MtrC nor OmcA are essential for the reduction of soluble, complexed Fe(III)-citrate or Fe(III)-NTA; however, at least one of these outer membrane cytochromes is required for the reduction of Fe(III)- and Mn(III/IV)- oxides. In vitro analysis of purified, recombinant protein demonstrated that both cytochromes transfer electrons directly to metal-oxides; however, MtrC transfers electrons at a faster rate than OmcA. Immunolocalization of MtrC and OmcA reveal that both cytochromes are surface-exposed on the cell outer-membrane and co-localize with insoluble iron precipitates when respiring ferrihydrite or cultured aerobically with Fe(III)-citrate. Additionally, during prolonged incubation, wild-type cells promoted biotransformation of ferrihydrite to vivianite [Fe3(PO4)2•8H2O] while the double cytochrome mutant was unable to form any secondary mineral phases. Collectively, our results support a role for direct electron transfer from OMCs to metal oxides by establishing their in vitro electron transfer activities, confirming the requirement of either MtrC or OmcA for in vivo reductive biomineralization of ferrihydrite, and localizing the cytochromes to the cell exterior where they can directly contact mineral substrates.

59 BASIC BIOLOGICAL SCIENCES↗

Enthalpy of Uranium Adsorption onto Hematite

The influence of temperature on the adsorption of metal-ions at the solid-water interface is often overlooked, despite the important role that adsorption plays in metal ion fate and transport in the natural environment where temperatures vary widely. Herein, we examine the temperature-dependent adsorption of uranium, a widespread radioactive contaminant, onto the ubiquitous iron oxide, hematite. The multi-temperature batch adsorption data and surface complexation models indicate that adsorption of uranium, as the hexavalent uranyl (UO 2 2+ ) ion, increases significantly with increasing temperature, with an adsorption enthalpy (ΔH ads ) of +71 kJ mol –1 . We suggest that this endothermic, entropically-driven adsorption behavior is linked to reorganization of the uranyl-ion-hydration and interfacial water structures upon U VI adsorption at the hematite surface. Altogether, this work provides fundamental insight into the thermodynamics driving metal-ion adsorption reactions and provides the specific enthalpy value necessary for improved predictive geochemical modeling of U VI adsorption in the environment.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Modelling of electron and hole trapping in oxides

We critically review several examples of successful modelling of electron and hole trapping in metal oxides, which demonstrate a breadth of polaronic behaviour. The examples range from self-trapping in the perfect lattice to trapping by structural defects and impurities and illustrate the important phenomenon of charge localization. We present recent results in four different systems: nanoporous mayenite, amorphous SiO2, crystalline hafnia and MgO surfaces and interfaces. The complex nature of charge trapping and polaronic behaviour in these systems can go beyond traditional cases and illustrate the different challenges involved.

Environmental Molecular Sciences Laboratory↗

On the Formation of IR-Light-Emitting Ge Nanocrystals in Ge:SiO{sub 2} Films

The study is concerned with light-emitting Ge nanocrystals formed during the annealing of Ge{sub x}[SiO{sub 2}]{sub 1–x} films produced by the high-vacuum cosputtering of germanium and quartz targets onto substrates at a temperature of 100°C. In accordance with the conditions of growth, the Ge molar fraction was varied from 10 to 40%. By means of electron microscopy and Raman spectroscopy, amorphous Ge nanoclusters ~4–5 nm in dimensions are detected in as-deposited films with a Ge content higher than 20 mol %. To crystallize amorphous nanoclusters, annealing at temperatures of up to 650°C is used. The kinetics of the crystallization of Ge nanoclusters is studied, and it is established that up to ~1/3 of the amorphous phase is retained in the system, supposedly at the interfaces between nanocrystals and the surrounding amorphous SiO{sub 2} matrix. It is found that, upon annealing in normal atmosphere, germanium nanoclusters are partially or completely oxidized (at a Ge molar fraction of 30% and smaller). An intense infrared photoluminescence signal from quantum-confined Ge nanocrystals and a visible photoluminescence signal defined by defect complexes (oxygen vacancy + excess Ge atoms) are observed.

36 MATERIALS SCIENCE↗

Nickel Interlayer for Improved Silver Complex Inks Metallization in GaAs Photovoltaic Devices

Large areas of III-V photovoltaic panels are essential to supplying operational energy for a growing demand of satellites of strategic importance to the United States military, covering a range of applications. High fabrication costs and low manufacturing throughput are key barriers to meeting the necessary supply, which can in turn jeopardize mission success. At the device level, metallization based on printing of complex metal inks has attracted significant research interest due to its potential to substantially reduce processing costs and increase throughput while achieving electrical performance comparable to those of conventional metallization schemes. For GaAs photovoltaic devices, however, reliable electrical contacting remains challenging due to the formation of an interfacial oxide layer at the metal-semiconductor interface. This oxide barrier severely limits current extraction from the PV absorber, resulting in unacceptably high contact resistance. In this study, we report the introduction of a reactive nickel (Ni) interfacial layer between the silver metal fingers and the GaAs substrate to suppress oxide formation while maintaining a low-resistance electrical interface, and show performance data from fully fabricated GaAs devices incorporating the Ni interlayer. These results demonstrate the potential of reactive Ni ink as an effective interfacial layer for improved electrical contacting in low-cost PV metallization schemes.

14 SOLAR ENERGY↗

Probing the Energetics of Molecule–Material Interactions at Interfaces and in Nanopores

During the past decades, advances in interfacial chemistries at the molecular level are shaping our world by playing crucial roles in balancing global scale energy crisis and critical environmental concerns. However, systematic investigations into the binding energies, site distribution and their correlation with the molecular-level surface assemblages and structures at interfaces and in nanopores are rarely documented. In this review, we summarize a set of systematic calorimetric studies on surface energetics we performed during the last decade. These studies demonstrate how thermochemistry can reveal crucial energetic insights into a series of molecule – material interactions relevant to a number of applications, including carbon capture and sequestration, energy production, sustainable chemical processing, catalysis, and nanogeoscience. Calorimetric methodologies developed and applied include direct gas adsorption calorimetry, nearroom temperature solvent immersion/solution calorimetry and high temperature oxide melt solution calorimetry. Using these highly unique techniques, we reveal the thermodynamic complexity of carbon dioxide capture on metal – organic framework (MOF) sorbents with built-in and grafted nucleophilic functional groups (-OH and -NH2). These studies suggest that carbon dioxide adsorption on functionalized MOFs is a complex process involving multiple thermodynamic factors, as reflected by changes in surface phase and structure, chemical bonding and degree of disorder with varying temperature and gas loading. The fundamental insights obtained may help optimize the design, synthesis and application of MOF-based carbon dioxide sorbents for carbon capture and sequestration. In parallel, we also explore the energetics of interaction and competition between small molecules (water, carbon dioxide, methane, simple and complex organics) and inorganic materials (calcite, silica, zirconia, zeolites, mesoporous frameworks, alumina, and uranium), at interfaces and in nanopores. Combined with spectroscopic, diffraction, electron microscopic and computational techniques, the energetics of gas/liquid – solid interactions can be correlated with specific bonds, molecular configurations and nanostructures. Although the energetics evolves continuously from weak association to strong bonding to classical capping, distinct regions of rapidly changing stepwise energetics often separate the different regimes. These phenomena are closely related to the properties of inorganic material surfaces (hydrophobicity and acidity/basicity), the framework architectures, and the chemical nature of adsorbate molecules. These direct thermodynamic insights reinforce our understanding of complex small molecule – inorganic material interactions important to multiple disciplines of chemical engineering, materials science, nanogeoscience and environmental technology, including heterogeneous catalysis, molecular separation, material design and synthesis, biomineralization, contaminant and nutrient transport, carbonate formation, and water – organic competitions on material/mineral surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Handbook of Molecular Beam Epitaxy of Oxide Materials: Epitaxial Complex Oxide Growth on Semiconductors

This chapter covers the epitaxy of complex oxides on common inorganic semiconductors. The chapter opens with an introduction, motivating the subject and highlighting key general challenges (Section 6.1). We then proceed to describe the general steps of the growth procedure in Section 6.2, which concludes with an overall discussion about trade-offs and expectation management, with an emphasis on the oxide–semiconductor interface. From there, the text describes oxide growth on the common semiconductors, starting with silicon (Section 6.3), where surface reactions and oxidation are the most challenging aspects. Oxide epitaxy on germanium is described in Section 6.4, which is a less challenging oxide growth scheme on semiconductors. Section 6.5 describes oxide epitaxy on gallium arsenide, one of the more challenging schemes, where interface stability and surface preparation pose key challenges. Finally, in Section 6.6, oxide epitaxy on gallium nitride is described, where the lattice mismatch takes the stage as the key challenge. Altogether, this chapter aims to provide the reader with the practical knowledge, tactics and strategies for oxide epitaxy on semiconductors.

Demkov, Alexander A↗

Multicationic interactions mitigating lattice strain in sodium layered cathodes

Transition-metal (TM) layered oxides have emerged as the primary cathode choice for sodium-ion batteries (SIBs) due to their high energy density and sustainable chemistry using non-critical elements. However, their anisotropic lattice strain and stress accumulation during (de)sodiation lead to severe structural degradation, yet an intrinsic strain-depressant approach remains elusive. Herein, we propose entropy regulation with zero Li/Co usage to mitigate harmful lattice displacements and enhance the electrochemical performance of sodium layered cathodes. Our findings demonstrate that high entropy design effectively inhibits TMO 6 octahedra distortions upon cycling, as evidenced by hard X-ray absorption spectroscopy, greatly reducing near-surface structural deconstruction and interface side reactions. Furthermore, multicationic interactions driven by configurational entropy thermodynamically mitigate the formation of oxygen defects and strengthen ligand-to-metal coordination. The complementarity inherent in charge compensation within complex systems is unveiled and the restrained lattice parameters deviations without interior volume residuals are successfully achieved. As a result, the multicationic cathode exhibits improved cycling stability and Na + diffusion kinetics in both half and full cells. The cathode chemistries outlined here broaden the prospects for lattice engineering to alleviate bulk fatigue and open up the possibility to develop an economically viable layered oxides with long durability.

Wang, Haoji [Central South University, Changsha (C↗