Search NASA⌕ Search

SEARCH · Search NASA

Results for “component technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Bell Helicopter Advanced Rotocraft Transmission (ART) program

Future rotorcraft transmissions require key emerging material and component technologies using advanced and innovative design practices in order to meet the requirements for a reduced weight to power ratio, a decreased noise level, and a substantially increased reliability. The specific goals for the future rotorcraft transmission when compared with a current state-of-the-art transmission (SOAT) are: (1) a 25 percent weight reduction; (2) a 10 dB reduction in the transmitted noise level; and (3) a system reliability of 5000 hours mean-time-between-removal (MTBR) for the transmission. This report summarizes the work conducted by Bell Helicopter Textron, Inc. to achieve these goals under the Advanced Rotorcraft Transmission (ART) program from 1988 to 1995. The reference aircraft selected by BHTI for the ART program was the Tactical Tiltrotor which is a 17,000 lb gross weight aircraft. A tradeoff study was conducted comparing the ART with a Selected SOAT. The results showed the ART to be 29 percent lighter and up to 13 dB quieter with a calculated MTBR in excess of 5000 hours. The results of the following high risk component and material tests are also presented: (1) sequential meshing high contact ratio planetary with cantilevered support posts; (2) thin dense chrome plated M50 NiL double row spherical roller planetary bearings; (3) reduced kinematic error and increased bending strength spiral bevel gears; (4) high temperature WE43 magnesium housing evaluation and coupon corrosion tests; (5) flexure fatigue tests of precision forged coupons simulating precision forged gear teeth; and (6) flexure fatigue tests of plasma carburized coupons simulating plasma carburized gear teeth.

Henry, Zachary S.↗

NASA Envisioned Future Priorities for In-Space Transportation

The National Aeronautics and Space Administration (NASA) of the United States of America (US) has ambitious objectives for robust logistics solutions to commercialization of geocentric space, sustainable presence in Cislunar space and on the Lunar Surface, Human Mars exploration and expanded deep space robotic exploration. Critical to all these objectives are robust and affordable in-space transportation solutions. Resilient logistics is a precursor to sustained development and leveraging commercial investments. A range of near-term priority investments are required to enable the future envisioned state for In-Space Transportation. Advanced technology components and integrated system demonstrations for cryogenic fluid management are appropriate for viable human class propulsion and future leverage of In-Situ Resources Utilization propellant products. Space Nuclear Propulsion, both thermal and electric, investments enable human Mars exploration with reduced earth launches. Advanced propulsion investments enable lower cost development cycles and operations in addition to higher performance solutions for future robotic and extreme environment exploration. This paper provides a high-level overview of NASA’s plans for the development of in-space transportation capabilities, a description of the state-of-the-art, capability goals, technical challenges and gaps, and options for partnerships with industry and other agencies towards developing a robust power logistics infrastructure to support NASA’s objectives.

Propulsion↗

NASA Envisioned Future Priorities for In-Space Transportation

The National Aeronautics and Space Administration (NASA) of the United States of America (US) has ambitious objectives for robust logistics solutions to commercialization of geocentric space, sustainable presence in Cislunar space and on the Lunar Surface, Human Mars exploration and expanded deep space robotic exploration. Critical to all these objectives are robust and affordable in-space transportation solutions. Resilient logistics is a precursor to sustained development and leveraging commercial investments. A range of near-term priority investments are required to enable the future envisioned state for In-Space Transportation. Advanced technology components and integrated system demonstrations for cryogenic fluid management are appropriate for viable human class propulsion and future leverage of In-Situ Resources Utilization propellant products. Space Nuclear Propulsion, both thermal and electric, investments enable human Mars exploration with reduced earth launches. Advanced propulsion investments enable lower cost development cycles and operations in addition to higher performance solutions for future robotic and extreme environment exploration. This paper provides a high-level overview of NASA’s plans for the development of in-space transportation capabilities, a description of the state-of-the-art, capability goals, technical challenges and gaps, and options for partnerships with industry and other agencies towards developing a robust power logistics infrastructure to support NASA’s objectives.

Propulsion↗

High Energy Micron Scale Pixel Hybrid Detector

The objective of this technology development project has been to fabricate and characterize a new X-ray area image sensor innovation designed for high efficiency detection and imaging of hard X-rays (>20 KeV) with micron scale pixel resolution. A key technology component consists of a monolithic hybrid X-ray detector built by layering an amorphous Selenium X-ray photoconductor film directly deposited on a small pitch (7.8μm) CMOS active pixel readout array. A specific goal of this work is to provide a new detector tool to researchers working with synchrotron light sources, to extend the depth of exploration into nanoscale structures, and do so cost effectively. Early generation X-ray imaging detector tools fail to provide adequate resolving power and efficiency at high energies and our innovation provides a solution. A majority of proposed phase I tasks were completed. Those tasks included, in collaboration with KA Imaging, successful fabrication of specified a-Se layers on a 1Mpixel CMOS readout array to create the direct hybrid X-ray imaging array, packaging of the imaging array, assembly of electronics into a shielded detector box, loading user interface software for camera control and image capture, and performing initial (no X-ray) detector evaluation at Farrier Microengineering facilities. After initial tests, extensive testing using the X-ray beam line 1-BM source at Argonne National Laboratory Advanced Photon Source(ANL-APS) was performed. Imaging performance studies were conducted at multiple X-ray beam energies. Studies included X-ray response vs. X-ray energy, vs. applied detector field strength (HV), response linearity vs. integration time, MTF vs. beam energy, image lag measurements, and micron scale resolution pattern target imaging. This high energy micron scale X-ray detection technology is a first of a kind to be evaluated at the ANL-APS and is supported by Dr. Antonino Miceli, head of the detector physics group. Accomplishments include the first successful demonstration of a 1Mpix amorphous Selenium on CMOS readout direct hybrid X-ray imaging detector at a DOE sponsored National Laboratory. Modeled performance predictions were confirmed, proving micron scale resolution as well as an order of magnitude increase in conversion efficiency over conventional scintillator detector performance. A discovery of evidence of propagation-based phase contrast edge enhancement was unplanned and will be exploited in future experiments. This phase 1 technology demonstration verifies the efficacy of proposed high energy micron scale pixel X-ray hybrid a-Se imaging array products. The new detector products will cost effectively replace early generation detector technologies that currently fail to address increasing demand for tools to study nano structures and physical processes at high X-ray energies above 20keV. For example, current systems for transmission X-ray microscopy have low efficiency and available large pixel (~55µm) direct detectors do not offer sufficient resolution for Bragg fringe imaging at high energies. This detector innovation will solve these inadequacies. The new detector technology will compete in a $50M scientific X-ray detector market, growing at 6%, and will benefit Microtomography(µCT), X-ray diffractometry (XRD), Coherent Diffraction Imaging (CDI) applications. One application specified by Dr. Miceli at ANL is the 3D reconstruction of compact crystals at high energies requires small pixel high efficiency X-ray detectors. Farrier Microengineering, working with colleagues at KA Imaging and the University of Waterloo, successfully achieved the critical objectives of the Phase I proposal. We have proven the technical feasibility of this innovation by building and successfully testing a 1Mpixel a-Se/CMOS hybrid direct X-ray imaging array. Our commercialization roadmap of detector products will be implemented during a phase II project. We will demonstrate a migration of the technology to larger detector array sizes, improved temporal performance with detector layer engineering, and improved environmental and operational stability. Manufacturability and cost effectiveness are key objectives and product designs will leverage current state of the art CMOS wafer fabrication quality and volume manufacturing economics.

36 MATERIALS SCIENCE↗

Analyses Made to Order: Using Transformation to Rapidly Configure a Multidisciplinary Environment

Aerospace problems are highly multidisciplinary. Four or more major disciplines are involved in analyzing any particular vehicle. Moreover, the choice of implementation technology of various subsystems can lead to a change of leading domain or reformation of the driving equations. An excellent example is the change of expertise required to consider aircraft built from composite or metallic structures, or those propelled by chemical or electrical thrusters. Another example is in the major reconfiguration of handling and stability equations with different control surface configuration (e.g., canards, t-tail v four-post tail). Combinatorial problems are also commonplace anytime that a major system is to be designed. If there are only 5 attributes of a design to consider with 4 different options, this is already 1024 options. Adding just 5 more dimensions to the study explodes the space to over one million. Even generous assumptions like the idea that only 10% of the combinations are physically feasible can only contain the problem for so long. To make matters worse, the simple number of combinations is only the beginning. Combining the issue of trade space size with the need to reformulate the design problem for many of the possibilities makes life exponentially more difficult. Advances in software modeling approaches have led to the development of model-driven architecture. This approach uses the transformation of models into inferred models (e.g. inferred execution traces from state machines) or the skeletons for code generation. When the emphasis on transformation is applied to aerospace, it becomes possible to exploit redundancy in the information specified in multiple domain models into a unified system model. F1urther, it becomes possible to overcome the combinatorial nature of specifying integrated system behavior by manually combining the equations governing a given component technology. Transformations from a system specification combined with a system-analysis mapping specification enable one-click combination of domain analyses. This is a flexibility that has been missing from many engineering codes, which often entangle design specification and physical examination much more than is required to conduct the analysis. This capability has been investigated and cultivated within the DARPA F6 program by a team of JPL and Phoenix Integration engineers building the Adapatable Systems Design and Analysis (ASDA) framework. By embracing system modeling with SysML and the Query-View-Transformation (QVT) language, the ASDA team has been able to build a flexible, easily reconfigurable framework for building up and solving large tradespaces. Examples of application and lessons learned in building the framework will be described in this paper. In addition, the motivation will be laid for various tool vendors to develop open model description standards while being able to maintain competitive advantage through proprietary algorithms and approaches. These standards will also be compared to the underpinnings of model-driven architecture and the OMG standards of the Meta-Object Facility (MOF), SysML, and QVT.

Cole, Bjorn↗

Hydrogen Vehicles: Impacts of DOE Technical Targets on Market Acceptance and Societal Benefits

Hydrogen vehicles (H2V), including H2 internal combustion engine, fuel cell and fuel cell plugin hybrid, could greatly reduce petroleum consumption and greenhouse gas (GHG) emissions in the transportation sector. The U.S. Department of Energy has adopted targets for vehicle component technologies to address key technical barriers towidespread commercialization of H2Vs. This study estimates the market acceptance of H2Vs and the resulting societal benefits and subsidy in 41 scenarios that reflect a wide range of progress in meeting these technical targets. Important results include: (1) H2Vs could reach 20e70% market shares by 2050, depending on progress in achieving the technical targets.With a basic hydrogen infrastructure (w5% hydrogen availability), the H2V market share is estimated to be 2e8%. Fuel cell and hydrogen costs are the most important factors affecting the long-term market shares of H2Vs. (2) Meeting all technical targets on time could result in about an 80% cut in petroleumuse and a 62% (or 72% with aggressive electricity de-carbonization) reduction in GHG in 2050. (3) The required hydrogen infrastructure subsidy is estimated to range from $22 to $47 billion and the vehicle subsidy from $4 to $17 billion. (4) Long-term H2V market shares, societal benefits and hydrogen subsidies appear to be highly robust against delay in one target, if all other targets are met on time. R&D diversification could provide insurance for greater societal benefits. (5) Both H2Vs and plug-in electric vehicles could exceed 50% market shares by 2050, if all targets are met on time. The overlapping technology, the fuel cell plug-in hybrid electric vehicle, appears attractive both in the short and long runs, but for different reasons.

alternative fuel vehicle↗

Critical material content in modern conventional U.S. vehicle electronics

Critical materials (CM) are vital to modern technology. Components of modern vehicles can be recycled to recover and reuse the CMs to help ensure a supply of these materials. Electronic components from a 2015 GMC Sierra truck (21 components) and 2016 Toyota Camry sedan (10 components) were analyzed for CMs. The components were processed via size reduction, aqua regia leaching and dissolution, and final solutions were analyzed for metal content. It was found that most electronic components of both vehicles contain CM. The most concentrated CM in the components were Sn, Nb, and Tb. Nd and Co were found in several of the magnetic components. CM economic value was found to be low compared to the overall value of the components, and the CM content would not allow for a viable pathway for recycling. Remanufacturing of components may be a more economic option of reuse in the future.

2015 GMC Sierra↗

Hydrogen cooling options for MgB{sub 2}-based superconducting systems

With the arrival of MgB{sub 2} for low-cost superconducting magnets, hydrogen cooling has become an interesting alternative to costly liquid helium. Hydrogen is generally regarded as the most efficient coolant in cryogenics and, in particular, is well suited for cooling superconducting magnets. Cooling methods need to take into account the specific quench propagation in the MgB{sub 2} magnet winding and facilitate a cryogenically reliable and safe cooling environment. The authors propose three different multi-coolant options for MRI scanners using helium or hydrogen within the same design framework. Furthermore, a design option for whole-body scanners which employs technology, components, fueling techniques and safety devices from the hydrogen automotive industry is presented, continuing the trend towards replacing helium with hydrogen as a safe and cost efficient coolant.

42 ENGINEERING↗

Plasma Jet Driven Magneto-Inertial Fusion (PJMIF)

We report that PJMIF is the only embodiment of magneto-inertial fusion that has the unique combination of standoff implosion and high implosion velocity (50 km/s - 150 km/s). It uses inexpensive plasma guns for all plasma formation and implosion. It has potential for relatively high repetition rate from 1 to 2 Hz. Its configuration is compatible with the use of a thick liquid wall that doubles as a tritium breeding blanket as well as a coolant for extracting the heat out of the fusion reactor. Its operational parameter space allows for the possibility of using a suffciently dense target plasma for the target plasma to have a high beta. If such a high beta plasma could be realized, it would help to suppress micro and MHD instabilities, giving its target plasma classical transport and energy confinement characteristics. Its open geometry and moderate time and spatial scales provide convenient diagnostics access. Diagnostics accessibility, high shot rate and low cost per shot should enable quick resolution of technical issues during development, thus the potential for enabling rapid R&D of PJMIF. There are a number of challenges, however, for PJMIF including being at a very early stage of development, developing the required plasma guns, dealing with potential liner non-uniformities, clearing the chamber of residual high-Z gas between shots, and developing the repetitive pulsed power component technologies. Over the last three years, the development of the Plasma Liner Formation Experiment (PLX-alpha) have been undertaken to explore the physics and demonstrate the formation of a spherical liner by the merging of a spherical array of plasma jets. Two- and three- jet merging experiments have been conducted to study the interactions of the jets. Lastly, six- and seven-jet experiments have been performed to form a piece of the plasma liner. A brief status report on this development is provided in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design of a Compact Dry Cooler With an Aluminum Heat Exchanger Core for a Supercritical CO2 Power Cycle Is Evaluated for a Concentrating Solar Power Application

Abstract As the supercritical CO2 power cycle develops and the component technologies mature, there is still a need to reduce the associated capital and operating costs to maintain a competitive levelized cost of electricity (LCOE) in order to enter the market. When considering concentrating solar power (CSP) coupled with an sCO2 power block and sensible thermal storage, the technology presents a clean source for utility-scale power generation to support baseload or peak-load electrical demand. However, the LCOE of the technology is still considered higher than the competing technologies and should be reduced to better compete in the market; 2030 targets for dispatchable solar plants are 5¢/kWh for baseload CSP and 10¢/kWh for peaker plants, as set by the United States Department of Energy. In response to this need, this study is targeting improvements in the power cycle precooler to reduce power block contribution to LCOE. This study considers a dry cooler, as CSP plants are sensitive to water consumption because many installations are slated for remote or arid locations where solar irradiance is very high, but water is scarce. Furthermore, the power block footprint for an sCO2 system is quite compact, especially as compared to a steam cycle. Therefore, there is interest in installing a more compact dry cooler that is proportional to the reduced footprint sCO2 power block, while conventional dry coolers are an order of magnitude larger. The competing goals of size, performance, and cost were considered in this study to develop a compact dry cooler that can easily be packaged with the power block, significantly reducing the installation and transport cost compared to the current state of the art, while maintaining or improving upon the heat transfer performance and impact on plant LCOE. This paper details the high-level findings of a large dry cooler sensitivity study for design point selection, design of the compact dry cooler, expected year-round performance for the dry cooler and the power cycle, and the predicted LCOE for a 30-year plant life. It was found that an aluminum heat exchanger core can be suitably designed to meet the pressure and temperature requirements for a precooler in an sCO2 recompression Brayton cycle. The dry cooler assembly was found to have improved heat transfer performance, allowing for increased cycle efficiencies and a reduced plant LCOE. When coupled with a centrifugal blower and compact transition duct, the dry cooler assembly was able to reduce the installation footprint by over 50%.

14 SOLAR ENERGY↗

Soft Microfluidic Assemblies of Sensors, Circuits, and Radios for the Skin

When mounted on the skin, modern sensors, circuits, radios, and power supply systems have the potential to provide clinical-quality health monitoring capabilities for continuous use, beyond the confines of traditional hospital or laboratory facilities. The most well-developed component technologies are, however, broadly available only in hard, planar formats. As a result, existing options in system design are unable to effectively accommodate integration with the soft, textured, curvilinear, and time-dynamic surfaces of the skin. Here, we describe experimental and theoretical approaches for using ideas in soft microfluidics, structured adhesive surfaces, and controlled mechanical buckling to achieve ultralow modulus, highly stretchable systems that incorporate assemblies of high-modulus, rigid, state-of-the-art functional elements. Here, the outcome is a thin, conformable device technology that can softly laminate onto the surface of the skin to enable advanced, multifunctional operation for physiological monitoring in a wireless mode.

47 OTHER INSTRUMENTATION↗

Energy, Environmental, and Economic Analyses of Design Concepts for the Co-Production of Fuels and Chemicals with Electricity via Co-Gasification of Coal and Biomass

The overall objective of this project was to quantify the energy, environmental, and economic performance of industrial facilities that would coproduce electricity and transportation fuels or chemicals from a mixture of coal and biomass via co-gasification in a single pressurized, oxygen-blown, entrained-flow gasifier, with capture and storage of CO 2 (CCS). The work sought to identify plant designs with promising (Nth plant) economics, superior environmental footprints, and the potential to be deployed at scale as a means for simultaneously achieving enhanced energy security and deep reductions in U.S. GHG emissions in the coming decades. Designs included systems using primarily already-commercialized component technologies, which may have the potential for near-term deployment at scale, as well as systems incorporating some advanced technologies at various stages of R&D.

01 COAL, LIGNITE, AND PEAT↗

Mini-SHINE/MIPS Experiment

The mission of the Global Threat Reduction Initiative (GTRI) is to reduce and protect vulnerable nuclear and radiological materials located at civilian sites worldwide. The Highly Enriched Uranium (HEU) Reactor Conversion subprogram supports the conversion of domestic and international civilian research reactors and isotope production facilities from the use of weapons-of-mass-destruction- (WMD-) usable HEU fuel and targets to low enriched uranium (LEU) fuel and targets. These efforts result in permanent threat reduction because WMD-usable HEU in the civilian fuel cycle is minimized or eliminated. The main technology components of the program are (1) the development of advanced LEU fuels, (2) design and safety analysis for research reactor conversion, and (3) development of targets and processes for the production of the medical isotope molybdenum-99 ( 99 Mo )without using HEU.

Chemerisov, Sergey↗

Front-End Processes for Conversion of Current HEU-Based Alkaline Processes to LEU Foil Targets: Volumes and Compositions of All Waste, Product, and Off-Gas Streams from Both Front-End Options

The Global Threat Reduction Initiative (GTRI) Conversion Program develops technology necessary to enable the conversion of civilian facilities using high enriched uranium (HEU) to low enriched uranium (LEU) fuels and targets. The main technology components of the program are as follows: • The development of advanced LEU fuels, • Design and safety analysis for research reactor conversion, and • Development of targets and processes for the non-HEU production of the medical isotope molybdenum-99 ( 99 Mo).

Jerden Jr., James L.↗

CO 2 Saline Storage Demonstration in Colorado Sedimentary Basins. Applied Studies in Reservoir Assessment and Dynamic Processes Affecting Industrial Operations

This multitask research project was conducted in anticipation of a possible future increase in industrial efforts at CO 2 storage in Colorado sedimentary basins. Colorado is already the home to the oldest Rocky Mountain CO 2 storage site, the Rangely Oil Field, where CO 2 -EOR has been underway since the 1980s. The Colorado Geological Survey has evaluated storage options statewide, and as part of the SW Carbon Sequestration Partnership the Survey, is deeply engaged in and committed to suitable underground CO 2 storage. As a more sustainable energy industry is becoming a global priority, it is imperative to explore the range of technical options available to reduce emissions from fossil fuels. One such option is to store at least some emitted CO 2 underground. In this NETL-sponsored CO 2 sequestration project, the Colorado School of Mines and our partners at the University of Colorado have focused on a set of the major fundamental science and engineering issues surrounding geomechanics, mineralogy, geochemistry and reservoir architecture of possible CO 2 storage sites (not limited to Colorado). Those are the central themes of this final report and reported below in Tasks 2, 3, 4, and 6. Closely related to these reservoir geoscience issues are also legal, environmental and public acceptance concerns about pore space accessibility—as a precondition for CO 2 storage. These are addressed in Tasks 1, 5 and 7. Some debates about the future course of the energy industry can become acrimonius. It is true that the physics of combustion of hydrocarbons makes it impossible for fossil energy to attain a carbon footprint anywhere nearly as low as that of renewables. However, there are many offsetting benefits, not the least that fossil energy is still plentiful, it has a global and highly advanced distribution system in place, and the footprint that the fossil energy infrastructure occupies is orders of magnitude smaller than renewable energy facilities with equivalent energy capacity. Finally, inexpensive natural gas here in North America is pushing coal for electricity generation off the market, thus reducing US CO 2 emissions faster than any other large industrialized nation. These two big factors argue for renewed efforts to find technology solutions to reduce the carbon footprint (carbon dioxide as well as methane and trace gases) of conventional and unconventional oil and gas. One major such technology component is likely to be carbon capture, utilization and storage.

54 ENVIRONMENTAL SCIENCES↗

Advancing Transportation through Vehicle Electrification - PHEV

FCA US LLC viewed the American Recovery and Reinvestment Act (ARRA) as an historic opportunity to learn about and develop PHEV technologies and create the FCA US LLC engineering center for Electrified Powertrains. The ARRA funding supported FCA US LLC’s light-duty electric drive vehicle and charging infrastructure-testing activities and enabled FCA US LLC to utilize the funding on advancing Plug-in Hybrid Electric Vehicle (PHEV) technologies for production on future programs. FCA US LLC intended to develop the next-generations of electric drive and energy batteries through a properly paced convergence of standards, technology, components and common modules. To support the development of a strong, commercially viable supplier base, FCA US LLC also utilized this opportunity to evaluate various designated component and sub-system suppliers. The original proposal of this project was submitted in May 2009 and selected in August 2009. The project ended in December 2014.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advancing Plug-In Hybrid Technology and Flex Fuel Application on a Chrysler Minivan

FCA US LLC viewed this DOE funding as a historic opportunity to begin the process of achieving required economies of scale on technologies for electric vehicles. The funding supported FCA US LLC’s light-duty electric drive vehicle and charging infrastructure-testing activities and enabled FCA US LLC to utilize the funding on advancing Plug-in Hybrid Electric Vehicle (PHEV) technologies to future programs. FCA US LLC intended to develop the next generations of electric drive and energy batteries through a properly paced convergence of standards, technology, components, and common modules, as well as first-responder training and battery recycling. To support the development of a strong, commercially viable supplier base, FCA US LLC also used this opportunity to evaluate various designated component and sub-system suppliers. The original project proposal was submitted in December 2009 and selected in January 2010. The project ended in December 2014.

33 ADVANCED PROPULSION SYSTEMS↗

Composition and Realization of Source-to-Sink High-Performance Flows: File Systems, Storage, Hosts, LAN and WAN

A number of Department of Energy (DOE) science applications, involving exascale computing systems and large experimental facilities, are expected to generate large volumes of data, in the range of petabytes to exabytes, which will be transported over wide-area networks for the purpose of storage, visualization, and analysis. To support such capabilities, significant progress has been made in various components including the deployment of 100 Gbps networks with future 1 Tbps bandwidth, increases in end-host capabilities with multiple cores and buses, capacity improvements in large disk arrays, and deployment of parallel file systems such as Lustre and GPFS. High-performance source-to-sink data flows must be composed of these component systems, which requires significant optimizations of the storage-to-host data and execution paths to match the edge and long-haul network connections. In particular, end systems are currently supported by 10-40 Gbps Network Interface Cards (NIC) and 8-32 Gbps storage Host Channel Adapters (HCAs), which carry the individual flows that collectively must reach network speeds of 100 Gbps and higher. Indeed, such data flows must be synthesized using multicore, multibus hosts connected to high-performance storage systems on one side and to the network on the other side. Current experimental results show that the constituent flows must be optimally composed and preserved from storage systems, across the hosts and the networks with minimal interference. Furthermore, such a capability must be made available transparently to the science users without placing undue demands on them to account for the details of underlying systems and networks. And, this task is expected to become even more complex in the future due to the increasing sophistication of hosts, storage systems, and networks that constitute the high-performance flows. The objectives of this proposal are to (1) develop and test the component technologies and their synthesis methods to achieve source-to-sink high-performance flows, and (2) develop tools that provide these capabilities through simple interfaces to users and applications. In terms of the former, we propose to develop (1) optimization methods that align and transition multiple storage flows to multiple network flows on multicore, multibus hosts; and (2) edge and long-haul network path realization and maintenance using advanced provisioning methods including OSCARS and OpenFlow. We also propose synthesis methods that combine these individual technologies to compose high-performance flows using a collection of constituent storage-network flows, and realize them across the storage and local network connections as well as long-haul connections. We propose to develop automated user tools that profile the hosts, storage systems, and network connections; compose the source-to-sink complex flows; and set up and maintain the needed network connections. These solutions will be tested using (1) 100 Gbps connection(s) between Oak Ridge National Laboratory (ORNL) and Argonne National Laboratory (ANL) with storage systems supported by Lustre and GPFS file systems with an asymmetric connection to University of Memphis (UM); (2) ORNL testbed with multicore and multibus hosts, switches with OpenFlow capabilities, and network emulators; and (3) 100 Gbps connections from ESnet and their Openflow testbed, and other experimental connections. This proposal brings together the expertise and facilities of the two national laboratories, ORNL and ANL, and UM. It also represents a collaboration between DOE and the Department of Defense (DOD) projects at ORNL by sharing technical expertise and personnel costs, and leveraging the existing DOD Extreme Scale Systems Center (ESSC) facilities at ORNL.

97 MATHEMATICS AND COMPUTING↗