Search NASA⌕ Search

SEARCH · Search NASA

Results for “continuous simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Stable White Coatings

In a previous research program for the Jet Propulsion- Laboratory, extensive studies led to the development and specifications of three zinc oxide-pigmented thermal-control coatings. The principal objectives of this program are: improvement of the three paints (as engineering materials), determination of the validity of our accelerated space-simulation testing, and continuation of the zinc oxide photolysis studies begun in the preceding program. Specific tasks that are discussed include: improvement of potassium silicate coatings as engineering materials and elucidation of their storage and handling problems; improvement of methyl silicone coatings as engineering materials; studies of zinc oxide photolysis to establish reasons for the observed stability of zinc oxide; and determination of space-simulation parameters such as long-term stability (to 8000 ESH), effect of coating surface temperature on the rate of degradation, and validity of accelerated testing (by reciprocity and wavelength dependency studies).

COATING↗

Simulator manufacturers' requirements

Simulator manufacturers must continue to provide the customers the latest wind shear models available for pilot training. The release of the JAWS data package enabled the provision of a much more realistic wind shear package to the customer rather than just the standard six SRI wind shear profiles currently in use. In this brief presentation, the steps taken in implementing the JAWS data into the FAA 727 simulator are highlighted.

Reilly, David R.↗

Continuation Power Flow Analysis for PV Integration Studies at Distribution Feeders

This paper presents a method for conducting continuation power flow simulation on high-solar penetration distribution feeders. A load disaggregation method is developed to disaggregate the daily feeder load profiles collected in substations down to each load node, where the electricity consumption of residential houses and commercial buildings are modeled using actual data collected from single family houses and commercial buildings. This allows the modeling of power flow and voltage profile along a distribution feeder on a continuing fashion for a 24- hour period at minute-by-minute resolution. By separating the feeder into load zones based on the distance between the load node and the feeder head, we studied the impact of PV penetration on distribution grid operation in different seasons and under different weather conditions for different PV placements.

AC Chronological Power Flow↗

Bond breaking in epoxy systems: A combined QM/MM approach

A novel method to combine quantum mechanics (QM) and molecular mechanics has been developed to accurately and efficiently account for covalent bond breaking in polymer systems under high strain without the use of predetermined break locations. Use of this method will provide a better fundamental understanding of the mechano-chemical origins of fracture in thermosets. Since classical force fields cannot accurately account for bond breaking, and QM is too demanding to simulate large systems, a hybrid approach is required. In the method presented here, strain is applied to the system using a classical force field, and all bond lengths are monitored. When a bond is stretched past a threshold value, a zone surrounding the bond is used in a QM energy minimization to determine which, if any, bonds break. The QM results are then used to reconstitute the system to continue the classical simulation at progressively larger strain until another QM calculation is triggered. In this way, a QM calculation is only computed when and where needed, allowing for efficient simulations. A robust QM method for energy minimization has been determined, as well as appropriate values for the QM zone size and the threshold bond length. Compute times do not differ dramatically from classical molecular mechanical simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Receptivity of Hypersonic Boundary Layers to Distributed Roughness and Acoustic Disturbances

Boundary-layer receptivity and stability of Mach 6 flows over smooth and rough seven-degree half-angle sharp-tipped cones are numerically investigated. The receptivity of the boundary layer to slow acoustic disturbances, fast acoustic disturbances, and vortical disturbances is considered. The effects of three-dimensional isolated roughness on the receptivity and stability are also simulated. The results for the smooth cone show that the instability waves are generated in the leading edge region and that the boundary layer is much more receptive to slow acoustic waves than to the fast acoustic waves. Vortical disturbances also generate unstable second modes, however the receptivity coefficients are smaller than that of the slow acoustic wave. Distributed roughness elements located near the nose region decreased the receptivity of the second mode generated by the slow acoustic wave by a small amount. Roughness elements distributed across the continuous spectrum increased the receptivity of the second mode generated by the slow and fast acoustic waves and the vorticity wave. The largest increase occurred for the vorticity wave. Roughness elements distributed across the synchronization point did not change the receptivity of the second modes generated by the acoustic waves. The receptivity of the second mode generated by the vorticity wave increased in this case, but the increase is lower than that occurred with the roughness elements located across the continuous spectrum. The simulations with an isolated roughness element showed that the second mode waves generated by the acoustic disturbances are not influenced by the small roughness element. Due to the interaction, a three-dimensional wave is generated. However, the amplitude is orders of magnitude smaller than the two-dimensional wave.

Balakumar, P.↗

Integration of plant and microbial oil processing at oilcane biorefineries for more sustainable biofuel production

Oilcane—an oil-accumulating crop engineered from sugarcane—and microbial oil have the potential to improve renewable oil production and help meet the expected demand for bioderived oleochemicals and fuels. To assess the potential synergies of processing both plant and microbial oils, the economic and environmental implications of integrating microbial oil production at oilcane and sugarcane biorefineries were characterized. Due to decreased crop yields that lead to higher simulated feedstock prices and lower biorefinery capacities, current oilcane prototypes result in higher costs and carbon intensities than microbial oil from sugarcane. To inform oilcane feedstock development, we calculated the required biomass yields (as a function of oil content) for oilcane to achieve financial parity with sugarcane. At 10 dw% oil, oilcane can sustain up to 30% less yield than sugarcane and still be more profitable in all simulated scenarios. Assuming continued improvements in microbial oil production from cane juice, achieving this target results in a minimum biodiesel selling price of 1.34 [0.90, 1.85] USD∙L –1 (presented as median [5th, 95th] percentiles), a carbon intensity of 0.51 [0.47, 0.55] kg CO 2 e L –1 , and a total biodiesel yield of 2140 [1870, 2410] L ha –1 year –1 . Compared to biofuel production from soybean, this outcome is equivalent to 3.0–3.9 as much biofuel per hectare of land and a 57%–63% reduction in carbon intensity. While only 20% of simulated scenarios fell within the market price range of biodiesel (0.45–1.11 USD∙L –1 ), if the oilcane biomass yield would improve to 25.6 DMT∙ha –1 ∙y –1 (an equivalent yield to sugarcane) 87% of evaluated scenarios would have a minimum biodiesel selling price within or below the market price range.

09 BIOMASS FUELS↗

Projections of Declining Surface-Water Availability for the Southwestern United States

16 of the CMIP5 models had all the data needed for this work for at least one simulation that was continuous from 1950 to 2040. Details of the models analyzed here are provided in Table S1. The model data analyzed here are available at http://strega.ldeo.columbia.edu:81/expert/home/.naomi/.AR5/.v2/.historical:rcp85/.mmm16/ a. Assessing the climatology of the models Despite increases in horizontal resolution of many models compared to their CMIP3 counterparts none of these models can adequately resolve the topography of the south west United States, such as the Sierra Nevada and Rocky Mountains and the associated orographic precipitation. This requires that caution be used when interpreting the results presented here. To assess the ability of the models to simulate the current hydroclimate, in Figure S1 we show the observed (from the Global Precipitation Climatology Centre gridded rain gauge data, (1)) monthly climatology of precipitation and the same for all the models and the multimodel mean for the California-Nevada, Colorado headwaters and Texas regions. The GPCC data uses rain gauges only and interpolates to regular grids of which we used the 1◦ by 1◦ one. Details of the data set can be found in (2). While the models apparently overestimate precipitation in California and Nevada the seasonal cycle with wet winters and dry summers is very well represented. It is also possible that the rain gauge observations are biased low by inadequately sampling the higher mountain regions. How ever the models might also be expected to underestimate orographic precipitation due to inadequate horizontal resolution. The 25 models are also too wet in the Colorado headwaters region but correctly represent the quite even distribution though the year. The bimodal distribution of precipitation in Texas, with peaks in May and September, and the absolute amounts, are well modeled but with the September peak too weak. The positive precipitation bias translates into a positive runoff bias for the Colorado headwaters as also shown in Figure S1. Here the observed runoff values are taken from simulations of the Variable Infiltration Capacity (VIC) land surface-hydrology model (3) forced by observed meteorology (5) that were conducted as part of the North American Land Data Assimilation System project phase 2 ( (NLDAS-2), http://www.emc.ncep.noaa.gov/mmb/nldas/. Runoff for California-Nevada is better simulated but there is a positive bias over Texas despite no strong precipitation bias. To check whether regional climate models better simulate P and runoff in these regions we analyzed the historical simulation with the Regional Climate Model version 3 driven by the National Centers for Environmental Prediction-Department of Energy Reanalysis 2 available from the North American Regional Climate Change Assessment Program (http://www.narccap.ucar.edu). This model configuration retained these biases in P and runoff although they were reduced in amplitude. Given these varying biases we plot P and P − E changes in actual values but apply the simplest bias correction possible to the runoff and soil moisture values and show the modeled changes in terms of percentages of the 20th Century model climatologies. A thorough assessment of the simulation of North American climate in CMIP5 models is conducted in Sheffield at al. (North American Climate in CMIP5 Experiments. Part I: Evaluation of 20th Century Continental and Regional Climatology, manuscript submit ted to J. Climate, available at http://www.climate.noaa.gov/index.jsp?pg=./cpo pa/ mapp/cmip5 publications.html). Sheffield et al. analyze the climatology of precipitation, surface air temperature, low level winds, moisture fluxes, runoff etc. and conclude that the main features of the hydrological cycle, including characteristics of the atmospheric moisture balance and its seasonality, are captured in the CMP5 models subject to biases in total precipitation amounts. We chose to use all available models instead of selecting some and rejecting others based on an assessment of model realism. This is in accord with the suggestions of Mote et al. for CMIP3 (4) but future work needs to revisit this matter for the case of the CMIP5 ensemble.

Seager, Richard↗

Vehicle energy consumption estimation using large scale simulations and machine learning methods

Vehicle energy consumption and powertrain operations for future vehicle powertrain technologies are predicted through full-vehicle simulations using Autonomie, a simulation tool developed at Argonne National Laboratory. Over 1 million vehicles, with different powertrain types (conventional and numerous electrified powertrains) and component technologies (advanced engines, batteries, electrical machines, light weighting) are simulated for outputs including vehicle fuel economy and cost. Despite the ability of Autonomic to predict fuel economy given various combination of vehicle inputs, the full-vehicle simulation is very time-consuming. It takes approximately 84 h to simulate for 33,060 vehicles even using distributed computing on a cluster of 128 worker nodes. Moreover, Autonomic is unable to populate a continuous output space through simulation since it only yields outputs with discrete values instead of an input-output relation. This paper proposes a novel large-scale learning and prediction process (LSLPP) via machine learning approaches to answer the need for a continuous space of vehicle fuel economy and a more efficient simulation process. By learning in a supervised fashion to discover structures in data, the machine learning approaches seek to train a model that can explain the data with which we can perform prediction over unseen data. As such, we are able to accomplish analytic continuation on the current discrete space of simulation results. In addition, we present a random sampling -based numerosity reduction algorithm incorporated in LSLPP that reduces simulation runs and improves efficiency of data procurement. We analytically derive a theoretical bound in order to guarantee the effectiveness of our algorithm. We also compare random sampling to stratified sampling and suggest sampling strategies. A user-friendly tool is developed to support the process. Our experimental results confirm that the proposed LSLPP is able to greatly accelerate prediction and analysis of vehicle fuel economy. The output of this study is used by the US government to evaluate the impact of its R&D funding on energy security and CO 2 emission as well as for the setting of Corporate Average Fuel Economy (CAFE) standards.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

FROM ENGINE TO AFTERGLOW: COLLAPSARS NATURALLY PRODUCE TOP-HEAVY JETS AND EARLY-TIME PLATEAUS IN GAMMA-RAY BURST AFTERGLOWS

We demonstrate that the steep decay and long plateau in the early phases of gamma-ray burst X-ray afterglows are naturally produced in the collapsar model, by a means ultimately related to the dynamics of relativistic jet propagation through a massive star. We present two-dimensional axisymmetric hydrodynamical simulations that start from a collapsar engine and evolve all the way through the late afterglow phase. The resultant outflow includes a jet core that is highly relativistic after breaking out of the star, but becomes baryon loaded after colliding with a massive outer shell, corresponding to mass from the stellar atmosphere of the progenitor star which became trapped in front of the jet core at breakout. The prompt emission produced before or during this collision would then have the signature of a high Lorentz factor jet, but the afterglow is produced by the amalgamated post-collision ejecta that has more inertia than the original highly relativistic jet core and thus has a delayed deceleration. This naturally explains the early light curve behavior discovered by Swift, including a steep decay and a long plateau, without invoking late-time energy injection from the central engine. The numerical simulation is performed continuously from engine to afterglow, covering a dynamic range of over 10 orders of magnitude in radius. Light curves calculated from the numerical output demonstrate that this mechanism reproduces basic features seen in early afterglow data. Initial steep decays are produced by internal shocks, and the plateau corresponds to the coasting phase of the outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

SIMULATED HUMAN ERROR PROBABILITY AND ITS APPLICATION TO DYNAMIC HUMAN FAILURE EVENTS

Abstract Objectives: Human reliability analysis (HRA) methods typically analyze human failure events (HFEs) at the overall task level. For dynamic HRA, it is important to model human activities at the subtask level. There exists a disconnect between dynamic subtask level and static task level that presents issues when modeling dynamic scenarios. For example, the SPAR-H method is typically used to calculate the human error probability (HEP) at the task level. As demonstrated in this paper, quantification in SPAR-H does not translate to the subtask level. Methods: Two different discrete distributions were generated for each SPAR-H Performance Shaping Factor (PSF) to define the frequency of PSF levels. The first distribution was a uniform, or uninformed distribution that assumed the frequency of each PSF level was equally likely. The second non-continuous distribution took the frequency of PSF level as identified from an assessment of the HERA database. These two different approaches were created to identify the resulting distribution of the HEP. The resulting HEP that appears closer to the known distribution, a log-normal centered on 1E-3, is the more desirable. Each approach then has median, average and maximum HFE calculations applied. To calculate these three values, three events, A, B and C are generated from the PSF level frequencies comprised of subtasks. The median HFE selects the median PSF level from each PSF and calculates HEP. The average HFE takes the mean PSF level, and the maximum takes the maximum PSF level. The same data set of subtask HEPs yields starkly different HEPs when aggregated to the HFE level in SPAR-H. Results: Assuming that each PSF level in each HFE is equally likely creates an unrealistic distribution of the HEP that is centered at 1. Next the observed frequency of PSF levels was applied with the resulting HEP behaving log-normally with a majority of the values under 2.5% HEP. The median, average and maximum HFE calculations did yield different answers for the HFE. The HFE maximum grossly over estimates the HFE, while the HFE distribution occurs less than HFE median, and greater than HFE average. Conclusions: Dynamic task modeling can be perused through the framework of SPAR-H. Identification of distributions associated with each PSF needs to be defined, and may change depending upon the scenario. However it is very unlikely that each PSF level is equally likely as the resulting HEP distribution is strongly centered at 100%, which is unrealistic. Other distributions may need to be identified for PSFs, to facilitate the transition to dynamic task modeling. Additionally discrete distributions need to be exchanged for continuous so that simulations for the HFE can further advance. This paper provides a method to explore dynamic subtask to task translation and provides examples of the process using the SPAR-H method.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

VISUAL CONTROL OF RENDEZVOUS

Space rendezvous involving human occupants will be required in many phases of space flight. In order that rendezvous capability be concurrent with other phases of manned space flight to insure that such tasks as the rotation and addition of crews for manned space station, supply of stations and launching complexes for deep-space probes, and the emergency rescue of personnel may be carried out, it is desirable to determine the ability of a human pilot to control the rendezvous maneuver. The National Aeronautics and Space Administration has conducted a study program to determine vehicle requirements and control techniques for a number of proposed methods for performing piloted space rendezvous. The final step in each phase of the rendezvous study program has been a simulation of the man-machine combination to test its feasibility. Initially, an analytical study was conducted to determine a range of conditions that would exist at the beginning of the terminal phase of rendezvous (ref. 1). Piloted systems were investigated for rendezvous control using these initial conditions. One such study of piloted rendezvous in which all the required control information was displayed to the simulator pilot on instruments is presented in reference 2. While the control of the rendezvous maneuver by use of the instrument display was shown to be feasible, the sufficiently accurate measurement of the necessary information to operate the instrument was realized to be a difficult problem. Consideration was therefore given to the possibility of maneuvering range and range rate required for the control of the rendezvous from visual sightings made during the initial control application. To provide this capability, an analytical study was made. This analytical study, presented in reference 3, derived three techniques for obtaining range and range rate visually and conducted a simplified preliminary situation to test the three analytical techniques. The study reported herein is a continuation of the simulation work begun in reference 3, and is aimed at determining the ability of a pilot to use visual information to reduce or eliminate the need for some or all of the data that would normally be displayed on instruments.

Rendezvous↗

Scaling Algebraic Multigrid Solvers: On the Road to Exascale

Algebraic Multigrid (AMG) solvers are an essential component of many large-scale scientific simulation codes. Their continued numerical scalability and efficient implementation is critical for preparing these codes for exascale. Our experiences on modern multi-core machines show that significant challenges must be addressed for AMG to perform well on such machines. We discuss our experiences and describe the techniques we have used to overcome scalability challenges for AMG on hybrid architectures in preparation for exascale.

97 MATHEMATICS AND COMPUTING↗

Optical injection in semiconductor ring lasers

We theoretically investigate optical injection in semiconductor ring lasers and disclose several dynamical regimes. Through numerical simulations and bifurcation continuation, two separate parameter regions in which two different injection-locked solutions coexist are revealed, in addition to a region in which a frequency-locked limit cycle coexists with an injection-locked solution. Finally, an antiphase chaotic regime without the involvement of any carrier dynamics is revealed. Parallels are drawn with the onset of chaos in the periodically forced Duffing oscillator.

74 ATOMIC AND MOLECULAR PHYSICS↗

Persistence of Precursor Waves in Two-dimensional Relativistic Shocks

We investigated the efficiency of coherent upstream large-amplitude electromagnetic wave emission via synchrotron maser instability in relativistic magnetized shocks using two-dimensional particle-in-cell simulations. We considered a purely perpendicular shock in an electron–positron plasma. The coherent wave emission efficiency was measured as a function of the magnetization parameter σ , which is defined as the ratio of the Poynting flux to the kinetic energy flux. The wave amplitude was systematically smaller than that observed in one-dimensional simulations. However, it continued to persist, even at a considerably low magnetization rate, where the Weibel instability dominated the shock transition. The emitted electromagnetic waves were sufficiently strong to disturb the upstream medium, and transverse filamentary density structures of substantial amplitude were produced. Based on this result, we discuss the possibility of the wakefield acceleration model to produce nonthermal electrons in a relativistic magnetized ion–electron shock.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of pressure gradients on turbulent premixed flames

The influence of a constant acceleration on a turbulent premixed flame is studied by direct numerical simulation. This acceleration induces a mean pressure gradient across the flame brush, leading to a modification of the turbulent flame structure due to differential buoyancy mechanisms between heavy cold fresh and light hot burnt gases. Such a pressure gradient may be encountered in practical applications in ducted flames. A favorable pressure gradient, i.e. the pressure decreases from unburnt to burnt gases, is found to decrease the flame wrinkling, the flame brush thickness, and the turbulent flame speed. A favorable pressure gradient also promotes counter-gradient turbulent transport. On the other hand, adverse pressure gradients tend to increase the flame brush thickness and turbulent flame speed, and promote classical gradient turbulent transport. The balance equation for the turbulent flux of the Favre averaged progress variable is also analyzed. The first results show that the fluctuating pressure term, cannot be neglected as generally assumed in models. Simple models assuming that a high mean pressure gradient may only be balanced by the cross-dissipation term seem too approximate. This analysis has to be continued to compare simulation data and closure schemes proposed for the transport equation. The analysis developed by Veynante et al.(1995) has been extended to imposed acceleration and mean pressure gradients. A simple model for the turbulent flux is proposed and validated from simulation data. Then, a modified criterion is derived to delineate between counter-gradient and gradient turbulent diffusion. In fact, counter-gradient diffusion may occur in most practical applications, especially for ducted flames.

Veynante, D.↗

Low energy Ar{sup +} bombardment of GaN surfaces: A statistical study of ion reflection and sputtering

Statistical molecular dynamics simulations are performed to analyze the sputtering of w-GaN (wurtzite) and z-GaN (zinc blende) surfaces under 100 eV Ar{sup +} ion bombardment. Ion reflection and physical sputtering mechanisms are investigated as a function of the ion impact angle and the crystalline nature of samples. The probability of ion reflection is lower for the w-GaN phase and increases with the angle of incidence {theta}{sub i}. As {theta}{sub i} becomes more glancing, the reflected ions become more energetic and their angular distribution tends to narrow. The sputtering yields of w-GaN and z-GaN surfaces are maximum for {theta}{sub i}=45 deg. For near-normal incidence, the probability of sputtering is smaller for the w-GaN phase, suggesting that the atomic arrangement in the pristine state modifies the characteristics of the momentum transfer occurring between the ion and the surface atoms during the collision cascade. Atomic nitrogen sputters preferentially and represents 87% to 100% of sputtered species due to its lower mass. These statistical results differ from the predictions of continuous ion bombardment simulations since the surfaces are not allowed to evolve self-consistently during the gathering of impact statistics.

36 MATERIALS SCIENCE↗

Assessment of Condition Monitoring Methods and Technologies for Inservice Inspection and Testing of Nuclear Power Plant Components

This report was prepared for the U.S. Nuclear Regulatory Commission (NRC) to explore the application of advanced technologies toward meeting the current and future regulatory requirements for maintenance and condition monitoring of structures, systems, and components. The advanced technologies considered in this work are advanced sensors and instrumentation, data analytics, machine learning and artificial intelligence (ML/AI), physics-based models, and digital twins (DT). The interest in the application of advanced technologies for condition monitoring in nuclear power plants continues to grow, and current and future licensees are expected to implement advanced technologies as part of their inservice inspection (ISI) and inservice testing (IST) programs. This report delineates the outcomes of an exploratory investigation into the implementation of advanced condition monitoring technologies to address ISI and IST requirements. A thorough review was conducted of the existing regulatory requirements for ISI and IST, along with an analysis of associated industry practices. Additionally, a state-of-the-art assessment was performed on advanced condition monitoring technologies frequently employed in non-nuclear sectors. This research incorporated two nuclear-specific case studies to illustrate the application of these technologies within the current nuclear fleet. The report provides an exhaustive discussion on the technical challenges, considerations, and opportunities associated with the deployment of advanced condition monitoring technologies. The following are key considerations in the application of advanced technologies for the ISI and IST of nuclear power plant components: • Developing adequate verification and validation procedures to confirm the functional and non-functional requirements, • Developing technical capabilities to conduct real-time asset condition monitoring, • Establishing guidance and protocol for modeling and simulation tools to continuously meet regulatory requirements, • Addressing trustworthiness, explainability, and interpretability of ML/AI methods, • Evaluating maintenance activities to maintain an adequate safety margin and avoid undesirable conditions, • Establishing cybersecure condition monitoring programs associated with a computer-based software system, and • Establishing standardized evaluation metrics for advanced condition monitoring programs. Interest in the use of advanced technologies for condition monitoring in ISI and IST programs continues to grow, and the technology is expected to experience rapid and wide industry adoption in the near future. Adoption of advanced technologies for condition monitoring could have novel and unique impacts on regulatory activities associated with ISI and IST programs. The NRC is continuing to explore the regulatory aspects of advanced technologies as part of ISI and IST programs by pursuing additional research in this technical area.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

Formulation of the linear model from the nonlinear simulation for the F18 HARV

The F-18 HARV is a modified F-18 Aircraft which is capable of flying in the post-stall regime in order to achieve superagility. The onset of aerodynamic stall, and continued into the post-stall region, is characterized by nonlinearities in the aerodynamic coefficients. These aerodynamic coefficients are not expressed as analytic functions, but rather in the form of tabular data. The nonlinearities in the aerodynamic coefficients yield a nonlinear model of the aircraft's dynamics. Nonlinear system theory has made many advances, but this area is not sufficiently developed to allow its application to this problem, since many of the theorems are existance theorems and that the systems are composed of analytic functions. Thus, the feedback matrices and the state estimators are obtained from linear system theory techniques. It is important, in order to obtain the correct feedback matrices and state estimators, that the linear description of the nonlinear flight dynamics be as accurate as possible. A nonlinear simulation is run under the Advanced Continuous Simulation Language (ACSL). The ACSL simulation uses FORTRAN subroutines to interface to the look-up tables for the aerodynamic data. ACSL has commands to form the linear representation for the system. Other aspects of this investigation are discussed.

Hall, Charles E., Jr.↗