Search NASA⌕ Search

SEARCH · Search NASA

Results for “controller tuning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Automated power-following control for nuclear thermal propulsion startup and shutdown using MOOSE-based applications

This paper describes an investigation of various automated control strategies applied to a full-core multiphysics Griffin/Bison/RELAP-7 model of a prototypical nuclear thermal propulsion system. In all cases, control is achieved by actuating control drums based on the demanded power and predicted quantities from the numerical model. One key finding is that hybrid proportional integral derivative controllers – a novel type of controller that uses both power and reactivity predicted signals – can demonstrate a level of performance rivaling that of period-generated control. The former requires parameter tuning, while the latter mostly necessitates providing reactivity coefficients and temperature rates of change, which could be very challenging to accurately measure in real-time. In addition, decay heat plays an important role in determining cooling requirements during cooldown phases. A decay heat model, accounting for burn time and throttling, was derived, and is incorporated within the model to simulate the steady-state and shutdown phases and satisfyingly follow the power demand. However, temperature overshoots and non-constant specific impulse during throttling will necessitate further improvements.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Spatially Adaptive Tunable Lighting Control System with Expanded Wellness and Energy Saving Benefits

Lighting design is becoming increasingly complex, including active dimming for energy savings and spectral tuning for human wellbeing. Modern commercial lighting control systems are already difficult to use, and maintain, and even with so-called Smart Lighting, optimizing light settings is rapidly exceeding the capabilities of direct human control, limiting the adoption of lighting control systems. The growing importance of Occupancy Centric Controls (OCC) for advanced building management systems can be applied to the development of autonomous lighting system controls needed to drive the adoption of advanced lighting controls for improved adaptive “sculpted illumination” for both greater energy savings and broader human wellbeing perspectives. This project, led by Rensselaer Polytechnic Institute, entitled “Spatially adaptive tunable lighting control system with expanded wellness and energy saving benefits” will develop and test an entirely new platform for automated optimized lighting design and control that requires little or no human engagement, yet contours lighting profiles automatically to minimize lighting energy use. We call this approach to lighting control “dynamic light sculpting” since the right amount of illumination is automatically delivered to occupants in real time. Since the system uses new, privacy-preserving occupant position and pose detection technologies developed by Rensselaer for broad OCC building applications, the control system will analyze how to deliver the right amount of the right type of illumination only where and when it is needed based these OCC platforms. To create these powerful autonomous lighting control platforms, the project will integrate evolving augmented reality (AR) and virtual reality (VR) tools with sophisticated lighting and interior design toolkits to create interactive lighting design and control simulators. Using the quickly growing paradigm of digital twins, these tools will integrate light fixture properties, occupancy sensor data, interior design data, and lighting specifications to accurately visualize how various design concepts interact with simulated yet realistic human activities that occur in commercial office buildings of various types. These advanced digital twin design and simulation tools will be combined with a new class of digitally-programmable LED lighting fixtures that can dynamically change the spectral content and direction of light emission. When fully integrated, the new autonomous lighting control system will take all of the guesswork out of optimizing light quality while minimizing energy consumption. Digital twin tools will simplify the design, installation, commissioning, operation, and maintenance of future energy-efficient lighting systems. It should be possible to reduce lighting energy costs from 40% to 70% with OCC based dynamic light sculpting systems. The work will be led by the Center for Lighting Enabled Systems and Applications (LESA) and the Center for Architectural Science and Ecology (CASE), both at Renssealer Polytechnic Institute; Lumileds, a global leader in the development of advanced LED systems; and HKS, a leading global architecture design firm. This interdisciplinary project team’s experience includes all of the design simulation tools, VR/AR digital twin visualization technology, advanced occupancy sensing technology, and complex control system design capabilities that will revolutionize lighting design and control technology to autonomously deliver high-quality lighting that improves human health and wellbeing while simultaneously maximizing lighting energy savings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Experimental Safe Extremum Seeking for Accelerators

Here, we demonstrate the recent designs of safe extremum seeking (Safe ES) on the 1-km-long charged particle accelerator at the Los Alamos Neutron Science Center (LANSCE). Safe ES is a modification of extremum seeking (ES) which, in addition to minimizing an analytically unknown cost, also employs a safety filter based on an analytically unknown control barrier function (CBF) safety metric. Tuning is necessitated by accelerators being large complex systems, with many drifting parameters due to thermal effects and degradation. At the same time, safe operation (the maintenance of state constraints) is crucial, as damage brings astronomical costs, both financially and in operation downtime. Our measured (but analytically unknown) safety metric is the beam current. We perform multivariable Safe ES on three accelerator applications, in which we adapt 4, 6, and 3 magnet strength parameters, respectively. Two of the three applications are for validated simulation models of beamlines at LANSCE: the first for the proton radiography (pRad) beamline of 800-MeV protons for spot size tuning; the second on a high-performance code, HPSim, for tuning the low-energy beam transport (LEBT) region that contains a beam of 750-keV protons. The third is an experimental tuning of the steering magnets in the LEBT at LANSCE.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Arbitrary electro-optic bandwidth and frequency control in lithium niobate optical resonators

In situ tunable photonic filters and memories are important for emerging quantum and classical optics technologies. However, most photonic devices have fixed resonances and bandwidths determined at the time of fabrication. Here we present an in situ tunable optical resonator on thin-film lithium niobate. By leveraging the linear electro-optic effect, we demonstrate widely tunable control over resonator frequency and bandwidth on two different devices. We observe up to ∼50 × tuning in the bandwidth over ∼50 V with linear frequency control of ∼230 MHz/V. We also develop a closed-form model predicting the tuning behavior of the device. This paves the way for rapid phase and amplitude control over light transmitted through our device.

42 ENGINEERING↗
DOE OSTI2020

Innovations in optimization and control of accelerators using methods of differential geometry and genetic algorithms (Final Report)

Online tuning of particle accelerators is necessary in order to achieve optimal machine performance. However, it is also a major challenge due to the large parameter space which must be searched and the fact that many of the desir- able objectives compete with one another, and so will not reach their optimal values simultaneously. In order to mitigate these issues, we have explored using dimension-reduction techniques to reduce the size of the parameter space which must be searched and multi-objective genetic algorithms to obtain the sets of tuning parameters which provide pareto-optimal values for the objectives. These methods have enabled us to obtain improved values of the vertical emittance at the Cornell Electron Storage Ring (CESR), and to do so with greater control of orbit errors. Algorithmic tuning is a multidisciplinary endeavour, requiring expertise in beam dynamics, diagnostics, control systems and computer science, and thus a key practical problem is to formulate a common language in which experts with different specialties can communicate. We developed a solution to this problem in the form of a generic accelerator software interface that allows for rapid prototyping of optimization and control algorithms. Our interface is built on the Experimental Physics and Industrial Control Systems (EPICS) and makes possible testing control code in simulation before deployment on real accelerators, as well as deployment of third-party optimization code.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

AI‐Driven Robot Enables Synthesis‐Property Relation Prediction for Metal Halide Perovskites in Humid Atmosphere

Materials Acceleration Platforms (MAPs) – also known as self-driving laboratories– present a new paradigm for materials science and promise an order of magnitude accelerated materials discovery compared to the traditional trial-and-error approach. Metal halide perovskites (MHPs) are an emerging class of materials for optoelectronic applications but are plagued by irreproducible optoelectronic quality, particularly for films fabricated in a humid atmosphere. Here, in this work, a machine learning (ML)-guided closed-loop platform is developed with a multimodal data fusion approach to predict synthesis–property relations for the optical quality of MHP thin films in relative humidities (RHs) ranging from 5–55%. The efficiency of this approach is confirmed by the fast-dropping learning rate to 2% after experimentally sampling less than 1% of the possible 5,000+ combinations. The prediction of synthesis–property relations is done by optical and imaging characterizations. In situ photoluminescence characterization revealed the origin of thin film quality variation at different RH. These insights provide an avenue for controlling the MHP crystallization by fine-tuning the synthesis parameters and RH for a given chemistry, thus lifting the need for stringent atmosphere control. The MAP enables an accelerated screening and understanding of the synthesis design space, facilitating rational synthesis recipe choice for a wide range of materials.

AI-driven robot↗
DOE OSTI2025

Magnetic Properties Tuning via Broad Range Site Deficiency in Square Net Material UCu x Bi 2

HfCuSi 2 -type pnictogen compounds have recently been shown to be a versatile platform for designing materials with topologically nontrivial band structures. However, these phases require strict control over the electron count to tune the Fermi level, which can only be achieved in compositions with A 2+ M 2+ Pn 2 and A 3+ M + Pn 2 (A = lanthanides, M = transition metals, Pn = pnictogens P–Bi) charge distribution. While such lanthanide compounds have been thoroughly studied as candidate magnetic topological materials, their heavy element analogs with uranium and bismuth remain largely underexplored. In this report, we present the synthesis of UCu x Bi 2 single crystals and study their magnetic properties. Detailed structural analysis revealed that flux-grown crystals always form as a site-deficient UCu x Bi 2 composition, where x varies between 0.20 and 0.64. Magnetic property measurements revealed a dependence of the magnetic coupling on the Cu site deficiency, linearly changing the Néel temperature from 51 K for UCu 0.60 Bi 2 to 118 K for UCu 0.30 Bi 2 . Moreover, higher Cu concentration promotes a metamagnetic transition in highly magnetically anisotropic UCu 0.60 Bi 2 single crystals. We show that DFT calculations can successfully model site deficiency in the UCu x Sb 2 and UCu x Bi 2 systems. This work paves the way toward using the site deficiency to tune the Fermi level in more ubiquitous A 3+ M 2+ x Pn 2 phases, which previously have not been considered topological candidate materials due to unfavorable electron count.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Design Principles for Efficient and Stable Water Splitting Photoelectrocatalysts

Photoelectrochemical water splitting is a promising avenue for sustainable production of hydrogen used in the chemical industry and hydrogen fuel cells. The basic components of most photoelectrochemical water splitting systems are semiconductor light absorbers coupled to electrocatalysts, which perform the desired chemical reactions. A critical challenge for the design of these systems is the lack of stability for the majority of desired semiconductors under operating water splitting conditions. One strategy to address this issue is to protect the semiconductor by covering it with a stabilizing insulator layer, creating a metal–insulator–semiconductor (MIS) architecture, which has demonstrated improved stability. In addition to enhanced stability, the insulator layer may significantly affect the electron and hole transfer, which governs the recombination rates. Furthermore, the insertion of an insulator layer leads to the introduction of additional insulator/electrocatalyst and insulator/semiconductor interfaces. These interfaces can impact the system’s performance significantly, and they need to be carefully engineered to optimize the efficiencies of MIS systems. In this Account, we describe our recent progress in shedding light on the critical role of the insulator and the interfaces on the performance of MIS systems. We discuss our findings by focusing on the concrete example of planar n-type Si protected by a HfO 2 insulator layer and coupled to a Ni or Ir electrocatalyst that performs the oxygen evolution reaction, one of the water splitting half-reactions. To improve our fundamental understanding of the insulator layer, we precisely control the HfO 2 insulator thickness using atomic layer deposition (ALD), and we perform a series of rigorous electrochemical experiments coupled with theory and modeling. We demonstrate that by tuning the insulator thickness, we can control the flux and recombination of photogenerated electrons and holes to optimize the generated photovoltage. Despite optimizing the thickness, we find that the maximum generated photovoltage in MIS systems is often significantly lower than the upper performance limit, i.e., there are additional losses in the system that could not be addressed by optimizing the insulator thickness. We identify the sources of these losses and describe strategies to minimize them by a combination of improving the semiconductor light absorption, removing nonidealities associated with interfacial defects, and finding alternative insulators with improved charge carrier selectivity. Finally, we quantify the improvements that can be obtained by implementing these specific strategies. Our collective work outlines strategies to analyze MIS systems, identify the sources of efficiency losses, and optimize the design to approach the fundamental performance limits. Furthermore, these general approaches are broadly applicable to photoelectrochemical materials that utilize sunlight to produce value-added chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Visualization of Tunable Weyl Line in A–A Stacking Kagome Magnets

Abstract Kagome magnets provide a fascinating platform for a plethora of topological quantum phenomena, in which the delicate interplay between frustrated crystal structure, magnetization, and spin–orbit coupling (SOC) can engender highly tunable topological states. Here, utilizing angle‐resolved photoemission spectroscopy, the Weyl lines are directly visualized with strong out‐of‐plane dispersion in the A–A stacked kagome magnet GdMn 6 Sn 6 . Remarkably, the Weyl lines exhibit a strong magnetization‐direction‐tunable SOC gap and binding energy tunability after substituting Gd with Tb and Li, respectively. These results not only illustrate the magnetization direction and valence counting as efficient tuning knobs for realizing and controlling distinct 3D topological phases, but also demonstrate AMn 6 Sn 6 (A = rare earth, or Li, Mg, or Ca) as a versatile material family for exploring diverse emergent topological quantum responses.

Cheng, Zi‐Jia↗
DOE OSTI2024

Electrochemical Capacitance Traces with Interlayer Spacing in Two‐dimensional Conductive Metal–Organic Frameworks

Abstract Electrically conductive metal–organic frameworks (MOFs) are promising candidates for electrochemical capacitors (EC) for fast energy storage due to their high specific surface areas and potential for redox activity. To maximize energy density, traditional inorganic pseudocapacitors have utilized faradaic processes in addition to double‐layer capacitance. Although conductive MOFs are usually comprised of redox active ligands which allow faradaic reactions upon electrochemical polarization, systematic studies providing deeper understanding of the charge storage processes and structure‐function relationships have been scarce. Here, we investigate the charge storage mechanisms of a series of triazatruxene‐based 2D layered conductive MOFs with variable alkyl functional groups, Ni 3 (HIR 3 ‐TAT) 2 (TAT=triazatruxene; R=H, Et, n ‐Bu, n ‐Pent). Functionalization of the triazatruxene core allows for systematic variation of structural parameters while maintaining in‐plane conjugation between ligands and metals. Specifically, R groups modulate interlayer spacing, which in turn shifts the charge storage mechanism from double‐layer capacitance towards pseudocapacitance, leading to an increase in molar specific capacitance from Ni 3 (HIH 3 ‐TAT) 2 to Ni 3 (HIBu 3 ‐TAT) 2 . Partial exfoliation of Ni 3 (HIBu 3 ‐TAT) 2 renders redox active ligand moieties more accessible, and thus increases the dominance of faradaic processes. Our strategy of controlling charge storage mechanism through tuning the accessibility of redox‐active sites may motivate further design and engineering of electrode materials for EC.

Su, Alice Y.↗
DOE OSTI2024

Electrochemical Capacitance Traces with Interlayer Spacing in Two‐dimensional Conductive Metal–Organic Frameworks

Abstract Electrically conductive metal–organic frameworks (MOFs) are promising candidates for electrochemical capacitors (EC) for fast energy storage due to their high specific surface areas and potential for redox activity. To maximize energy density, traditional inorganic pseudocapacitors have utilized faradaic processes in addition to double‐layer capacitance. Although conductive MOFs are usually comprised of redox active ligands which allow faradaic reactions upon electrochemical polarization, systematic studies providing deeper understanding of the charge storage processes and structure‐function relationships have been scarce. Here, we investigate the charge storage mechanisms of a series of triazatruxene‐based 2D layered conductive MOFs with variable alkyl functional groups, Ni 3 (HIR 3 ‐TAT) 2 (TAT=triazatruxene; R=H, Et, n ‐Bu, n ‐Pent). Functionalization of the triazatruxene core allows for systematic variation of structural parameters while maintaining in‐plane conjugation between ligands and metals. Specifically, R groups modulate interlayer spacing, which in turn shifts the charge storage mechanism from double‐layer capacitance towards pseudocapacitance, leading to an increase in molar specific capacitance from Ni 3 (HIH 3 ‐TAT) 2 to Ni 3 (HIBu 3 ‐TAT) 2 . Partial exfoliation of Ni 3 (HIBu 3 ‐TAT) 2 renders redox active ligand moieties more accessible, and thus increases the dominance of faradaic processes. Our strategy of controlling charge storage mechanism through tuning the accessibility of redox‐active sites may motivate further design and engineering of electrode materials for EC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Two-dimensional assembly of gold nanoparticles grafted with charged-end-group polymers

We introduced charged terminal groups to polymers that graft nanoparticles enable Coulombic control over their assembly by tuning the pH and salinity of their aqueous suspensions. Gold nanoparticles (AuNPs) are grafted with poly (ethylene glycol) (PEG) terminated with CH 3 (charge-neutral), COOH (negatively charged) or NH 2 groups (positively charged), and characterized with dynamic light scattering, ζ-potential, and thermal gravimetric analysis. Liquid surface X-ray reflectivity (XR) and grazing incidence small-angle X-ray scattering (GISAXS) are used to determine the density profile and in-plane structure of the AuNPs assembly at the aqueous surface. Assembly of PEG-AuNPs at the liquid/vapor interface is tunable by adjusting pH or salinity for COOH but less for NH 2 terminals. The distinct assembly behaviors are attributed to the overall charge of PEG-AuNPs as well as PEG conformation. COOH-PEG corona is more compact than those of the other terminal groups, leading to a crystalline structure with a smaller superlattice. The net charge per particle depends not only on the PEG terminal groups but also on the cation sequestration of PEG and the intrinsic negative charge of the AuNP surface. The closeness to overall charge neutrality, and hydrogen bonding in play, brought by NH 2 -PEG, drive NH 2 -PEG-AuNPs to assembly and crystallinity without additives to the suspensions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Defect engineering in nickel via electrodeposition following low temperature annealing

Electrodeposited nickel coatings are characterized by high densities of crystalline defects including dislocations, growth twins, and hydrogen bubbles/voids, arising from the non-equilibrium nature of deposition. While these metastable features influence as-deposited properties, their evolution under low temperature annealing remains unexplored. Here, in this study, we demonstrate that low temperature annealing (200 °C) induces significant microstructural rearrangement without grain growth, enabling defect engineering through thermally assisted dislocation motion and twin boundary migration. Notably, we observe faceted twin boundaries and dislocation organization into extended networks, which have been rarely reported under such annealing conditions. These transformations are attributed to hydrogen-assisted defect mobility, facilitated by the release or redistribution of hydrogen trapped during deposition. These structural transformations correlate with a significant enhancement in mechanical properties, including a twofold increase in yield strength and improved ductility. Our findings highlight the role of trapped hydrogen in mediating low-temperature defect mobility and twin boundary evolution, offering a unique pathway for microstructural tuning of metallic coatings through controlled annealing.

36 - MATERIALS SCIENCE↗
DOE OSTI2022

Probing Electrolyte Influence on CO 2 Reduction in Aprotic Solvents

Selective CO 2 capture and electrochemical conversion are important tools in the fight against climate change. Industrially, CO 2 is captured using a variety of aprotic solvents due to their high CO 2 solubility. However, most research efforts on electrochemical CO 2 conversion use aqueous media and are plagued by competing hydrogen evolution reaction (HER) from water breakdown. Fortunately, aprotic solvents can circumvent HER, making it important to develop strategies that enable integrated CO 2 capture and conversion. However, the influence of ion solvation and solvent selection within nonaqueous electrolytes for efficient and selective CO 2 reduction is unclear. In this work, we show that the bulk solvation behavior within the nonaqueous electrolyte can control the CO2 reduction reaction and product distribution occurring at the catalyst-electrolyte interface. We study different tetrabutylammonium (TBA) salts in two electrolyte systems with glyme ethers (e.g., 1,2 dimethoxyethane or DME) and dimethyl sulfoxide (DMSO) as a low and high dielectric constant medium, respectively. Using spectroscopic tools, we quantify the fraction of ion pairs that forms within the electrolyte. Also, we show how ion pair formation is prevalent in DME and is dependent on the anion type. More importantly, we show that as ion pair formation decreases within the electrolyte, CO 2 current densities increase, and a higher CO Faradaic efficiency is observed at low overpotentials. Meanwhile, in an electrolyte medium where the ion pair fraction does not change with the anion type (such as in DMSO), a smaller influence of solvation is observed on CO 2 current densities and product distribution. By directly coupling bulk solvation to interfacial reactions and product distribution, we showcase the importance and utility of controlling the reaction microenvironment in tuning the electrocatalytic reaction pathways. Insights gained from this work will enable novel electrolyte designs for efficient and selective CO 2 conversion to desired fuels and chemicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nanoconfinement of High Hydrogen-to-Metal Ratio Lanthanum Hydrides in Functionalized Carbon Hosts

Metal hydrides with a high hydrogen content are important for materials-based hydrogen storage and high-temperature superconductivity. Nanoconfinement of metal hydrides in porous hosts is a promising strategy to tune the thermodynamic stability and control the hydrogen-to-metal ratio. However, lanthanum hydride (LaH x ) nanoconfinement in porous materials has been limited due to the challenges associated with isolating and stabilizing nanoparticles of La or La-hydrides. Here we successfully demonstrated the chemical reduction of La­(III) salts to La(0), and subsequent infiltration into pure CMK-3 and nitrogen-doped CMK-3 (NCMK-3) porous carbons. Transmission electron microscopy measurements revealed a uniform distribution of LaH x species within the carbon hosts, while X-ray absorption and photoelectron spectroscopy provided detailed information about the local chemical environment. Sieverts measurements indicate that LaH x @NCMK-3 could desorb up to 0.75 wt % hydrogen, which is higher than non-nitrogen-functionalized CMK-3 (0.43 wt % H). Density Functional Theory and ab initio molecular dynamics calculations indicate that host–guest interaction energies are favorable for porous carbon with nitrogen defects, which is supported by experimental evidence. Moreover, high-pressure synchrotron X-ray diffraction measurements were conducted using a diamond anvil cell up to 60 GPa and reveal that the nitrogen-functionalized nanoporous carbon host favors the formation of higher H:La ratios in the presence of ammonia borane compared to the pure CMK-3 host. This approach could serve as a suitable platform for developing nanoscale superconducting materials at lower pressures and temperatures compared to bulk.

Shivanna, Mohana↗
DOE OSTI2022

Platinum Graphene Catalytic Condenser for Millisecond Programmable Metal Surfaces

Accelerating catalytic chemistry and tuning surface reactions require precise control of the electron density of metal atoms. In this work, nanoclusters of platinum were supported on a graphene sheet within a catalytic condenser device that facilitated electron or hole accumulation in the platinum active sites with negative or positive applied potential, respectively. The catalytic condenser was fabricated by depositing on top of a p-type Si wafer an amorphous HfO 2 dielectric (70 nm), on which was placed the active layer of 2–4 nm platinum nanoclusters on graphene. A potential of ±6 V applied to the Pt/graphene layer relative to the silicon electrode moved electrons into or out of the active sites of Pt, attaining charge densities more than 1% of an electron or hole per surface Pt atom. At a level of charge condensation of ±10% of an electron per surface atom, the binding energy of carbon monoxide to a Pt(111) surface was computed via density functional theory to change 24 kJ mol –1 (0.25 eV), which was consistent with the range of carbon monoxide binding energies determined from temperature-programmed desorption (ΔBE CO of 20 ± 1 kJ mol –1 or 0.19 eV) and equilibrium surface coverage measurements (ΔBE CO of 14 ± 1 kJ mol –1 or 0.14 eV). Impedance spectroscopy indicated that Pt/graphene condensers with potentials oscillating at 3000 Hz exhibited negligible loss in capacitance and charge accumulation, enabling programmable surface conditions at amplitudes and frequencies necessary to achieve catalytic resonance.

Inorganic carbon compounds↗
DOE OSTI2022

Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells

Achieving the long-term stability of perovskite solar cells is arguably the most important challenge required to enable widespread commercialization. Understanding the perovskite crystallization process and its direct impact on device stability is critical to achieving this goal. The commonly employed dimethyl-formamide/dimethyl-sulfoxide solvent preparation method results in a poor crystal quality and microstructure of the polycrystalline perovskite films. In this work, we introduce a high-temperature dimethyl-sulfoxide-free processing method that utilizes dimethylammonium chloride as an additive to control the perovskite intermediate precursor phases. By controlling the crystallization sequence, we tune the grain size, texturing, orientation (corner-up versus face-up) and crystallinity of the formamidinium (FA)/caesium (FA) y Cs 1-y Pb(I x Br 1-x )3 perovskite system. A population of encapsulated devices showed improved operational stability, with a median T80 lifetime (the time over which the device power conversion efficiency decreases to 80% of its initial value) for the steady-state power conversion efficiency of 1,190 hours, and a champion device showed a T80 of 1,410 hours, under simulated sunlight at 65 degrees C in air, under open-circuit conditions. In conclusion, this work highlights the importance of material quality in achieving the long-term operational stability of perovskite optoelectronic devices.

14 SOLAR ENERGY↗