Results for “core model proposal” — Page 18

NASA NTRS1996

Computational Analysis of Static and Dynamic Behaviour of Magnetic Suspensions and Magnetic Bearings

Static modelling of magnetic bearings is often carried out using magnetic circuit theory. This theory cannot easily include nonlinear effects such as magnetic saturation or the fringing of flux in air-gaps. Modern computational tools are able to accurately model complex magnetic bearing geometries, provided some care is exercised. In magnetic suspension applications, the magnetic fields are highly three-dimensional and require computational tools for the solution of most problems of interest. The dynamics of a magnetic bearing or magnetic suspension system can be strongly affected by eddy currents. Eddy currents are present whenever a time-varying magnetic flux penetrates a conducting medium. The direction of flow of the eddy current is such as to reduce the rate-of-change of flux. Analytic solutions for eddy currents are available for some simplified geometries, but complex geometries must be solved by computation. It is only in recent years that such computations have been considered truly practical. At NASA Langley Research Center, state-of-the-art finite-element computer codes, 'OPERA', 'TOSCA' and 'ELEKTRA' have recently been installed and applied to the magnetostatic and eddy current problems. This paper reviews results of theoretical analyses which suggest general forms of mathematical models for eddy currents, together with computational results. A simplified circuit-based eddy current model proposed appears to predict the observed trends in the case of large eddy current circuits in conducting non-magnetic material. A much more difficult case is seen to be that of eddy currents in magnetic material, or in non-magnetic material at higher frequencies, due to the lower skin depths. Even here, the dissipative behavior has been shown to yield at least somewhat to linear modelling. Magnetostatic and eddy current computations have been carried out relating to the Annular Suspension and Pointing System, a prototype for a space payload pointing and vibration isolation system, where the magnetic actuator geometry resembles a conventional magnetic bearing. Magnetostatic computations provide estimates of flux density within airgaps and the iron core material, fringing at the pole faces and the net force generated. Eddy current computations provide coil inductance, power dissipation and the phase lag in the magnetic field, all as functions of excitation frequency. Here, the dynamics of the magnetic bearings, notably the rise time of forces with changing currents, are found to be very strongly affected by eddy currents, even at quite low frequencies. Results are also compared to experimental measurements of the performance of a large-gap magnetic suspension system, the Large Angle Magnetic Suspension Test Fixture (LAMSTF). Eddy current effects are again shown to significantly affect the dynamics of the system. Some consideration is given to the ease and accuracy of computation, specifically relating to OPERA/TOSCA/ELEKTRA.

Britcher, Colin P.↗

NASA NTRS2002

Turbulence Measurements of Separate Flow Nozzles with Mixing Enhancement Features

Comparison of turbulence data taken in three separate flow nozzles, two with mixing enhancement features on their core nozzle, shows how the mixing enhancement features modify turbulence to reduce jet noise. The three nozzles measured were the baseline axisymmetric nozzle 3BB, the alternating chevron nozzle, 3A12B, with 6-fold symmetry, and the flipper tab nozzle 3T24B also with 6-fold symmetry. The data presented show the differences in turbulence characteristics produced by the geometric differences in the nozzles, with emphasis on those characteristics of interest in jet noise. Among the significant findings: the enhanced mixing devices reduce turbulence in the jet mixing region while increasing it in the fan/core shear layer, the ratios of turbulence components are significantly altered by the mixing devices, and the integral lengthscales do not conform to any turbulence model yet proposed. These findings should provide guidance for modeling the statistical properties of turbulence to improve jet noise prediction.

Bridges, James↗

NASA NTRS2022

An ALMA Study of the Massive Molecular Clump N159W-North in the Large Magellanic Cloud: A Possible Gas Flow Penetrating One of the Most Massive Protocluster Systems in the Local Group

Massive dense clumps in the Large Magellanic Cloud can be an important laboratory to explore the formation ofpopulous clusters. We report multiscale ALMA observations of the N159W-North clump, which is the most CO-intense region in the galaxy. High-resolution CO isotope and 1.3 mm continuum observations with an angularresolution of∼025(∼0.07 pc)revealed more thanfive protostellar sources with CO outflows within the mainridge clump. One of the thermal continuum sources, MMS-2, shows an especially massive/dense nature whosetotal H2mass and peak column density are∼104Meand∼1024cm−2, respectively, and harbors massive(∼100Me)starless core candidates identified as its internal substructures. The main ridge containing this sourcecan be categorized as one of the most massive protocluster systems in the Local Group. The CO high-resolutionobservations found several distinctfilamentary clouds extending southward from the star-forming spots. The CO(1–0)data set with a largerfield of view reveals a conical,∼30 pc long complex extending toward the northerndirection. These features indicate that a large-scale gas compression event may have produced the massive star-forming complex. Based on the striking similarity between the N159W-North complex and the other twopreviously reported high-mass star-forming clouds in the nearby regions, we propose a“teardrops inflow model”that explains the synchronized, extreme star formation across>50 pc, including one of the most massiveprotocluster clumps in the Local Group.

Kazuki Tokuda↗

NASA NTRS2004

The Structure of Young Stellar Systems: Establishing the Initial Conditions for Planet Formation

FYO1-FY03 Origins support to the PI had been as part of an effort involving Profs. Blake, van Dishoeck and L.G. Mundy of the University of Maryland. As outlined below, the merging of BIMA+OVRO into the Combined Array for Research in Millimeter Astronomy (CARMA) and our mutual involvement in the Spitzer Legacy Science program now provides a more natural means of continuing the Caltech/Maryland collaboration. In addition, the spectroscopy/radiative transfer programs led by Profs. Blake, Hogerheijde, and van Dishoeck form a more cohesive basis for a single proposal. Students supported by our previous Origins grant have been involved in making some of the first sub-arcsecond resolution images of the morphology and chemistry of individual YSOs at OVRO and BIMA, in the analysis of IR spectra taken by ISO, and in continuing exploratory IR diffraction-limited imaging and spectroscopy at the Keck and VLT observatories. Notable scientific accomplishments in the past grant period include: 1) detecting high density and temperature hot cores in the dynamically accreting envelopes of low mass protostars that contain significant quantities of complex, prebioitc molecules, 2) imaging chemical and isotopic zonation in the outer regions of T Tauri star accretion disks, particularly fractional ionization and D/H studies, 3) acquiring and modeling the first extensive CO v = 1 approaches 0 spectroscopy survey of the terrestrial planet-forming region of circumstellar accretion disks, and 4) optimizing detailed radiative transfer modeling of the molecular and dust emission from YSO envelopes and from comets, including a new parallelized implementation.

Blake, Geoffrey A.↗

NASA NTRS1973

Properties of the solar nebula and the origin of the moon.

The basic geochemical model of the structure of the moon proposed by Anderson, in which the moon is formed by differentiation of the calcium, aluminium, and titanium-rich inclusions in the Allende meteorite, is accepted, and the conditions for formation of this moon within the solar nebula models of Cameron and Pine are discussed. The basic material condenses while iron remains in the gaseous phase, which places the formation of the moon slightly inside the orbit of Mercury. Some condensed metallic iron is likely to enter the moon in this position, and since the moon is assembled at a very high temperature, it is likely to have been fully molten, so that the iron can remove the iridium from the silicate material and carry it down to form a small core. Interactions between the moon and Mercury lead to the present rather eccentric Mercury orbit and to a much more eccentric orbit for the moon, reaching past the orbit of the earth, establishing conditions which are necessary for capture of the moon by the earth.

Cameron, A. G. W.↗

DOE OSTI2025

Reconnection-driven Flares in M87*: Proton–Synchrotron-powered GeV Emission

Magnetic reconnection in current layers that form intermittently in radiatively inefficient accretion flows onto black holes is a promising mechanism for particle acceleration and high-energy emission. It has been recently proposed that such layers, arising during flux eruption events, can power the rapid TeV flares observed from the core of M87. In this scenario, inverse-Compton scattering of soft radiation from the accretion flow by energetic electron–positron pairs produced near the reconnection layer was suggested as the primary emission mechanism. However, detailed calculations show that radiation from pairs alone cannot account for the GeV emission detected by the Fermi observatory. In this work, we combine analytic estimates with 3D radiative particle-in-cell simulations of pair–proton plasmas to show that the GeV emission can be naturally explained by synchrotron radiation from protons accelerated in the current sheet. Although the exact proton content of the layer is uncertain, our model remains robust across a broad range of proton-to-pair number density ratios. While protons are subdominant in number compared to pairs, our simulations demonstrate that they can be accelerated more efficiently, leading to a self-regulated steady state in which protons dominate the energy budget. Ultimately, proton synchrotron emission accounts for approximately 5%–20% of the total dissipation power. The majority is radiated as MeV photons via pair synchrotron emission, with a smaller fraction emitted as TeV photons through inverse-Compton scattering.

Active galactic nuclei↗

NASA NTRS1973

Discrete Levels of Beginning Height of Meteors in Streams

Consideration is given for 26 streams of meteors classified according to Ceplecha's discrete levels of beginning height, 13 of which are associated with known comets. Comet Biela produced in the Andromedids a double-peaked distribution (Classes A and C). Apparently no known comets produce a stream of Class B. Consideration of Whipple and Stefanik's model of an icy conglomerate nucleus with radioactive heating and redistribution of ice leads to association of Ceplecha's Class C with the residue of the ice-impregnated surface of a cometary nucleus after sublimation of the ices, and of Ceplecha's Class A with the core of a cometary nucleus. Class B meteoroids are then associated with less dense cores of smaller cometary nuclei that have lost their surfaces and are too small to have been observed. It is concluded that the density of Class A meteoroids (1.2 g/cu cm) is so close to that of Type 1 carbonaceous chondrites (2 g/cu cm) as to suggest that the latter come from old cores of very large nuclei of comets, an idea originally proposed by McCrosky and Ceplecha.

Cook, A. F., II↗

NASA NTRS2012

Acoustic Investigation of Jet Mixing Noise in Dual Stream Nozzles

In an earlier study, a prediction model for jet noise in dual stream jets was proposed that is founded on velocity scaling laws in single stream jets and similarity features of the mean velocity and turbulent kinetic energy in dual stream flows. The model forms a composite spectrum from four component single-stream jets each believed to represent noise-generation from a distinct region in the actual flow. While the methodology worked effectively at conditions considered earlier, recent examination of acoustic data at some unconventional conditions indicate that further improvements are necessary in order to expand the range of applicability of the model. The present work demonstrates how these predictions compare with experimental data gathered by NASA and industry for the purpose of examining the aerodynamic and acoustic performance of such nozzles for a wide range of core and fan stream conditions. Of particular interest are jets with inverted velocity and temperature profiles and the appearance of a second spectral peak at small aft angles to the jet under such conditions. It is shown that a four-component spectrum succeeds in modeling the second peak when the aft angle refraction effects are properly incorporated into the model. A tradeoff of noise emission takes place between two turbulent regions identified as transition and fully mixed regions as the fan stream velocity exceeds that of the core stream. The effect of nozzle discharge coefficients will also be discussed.

Khavaran, Abbas↗

DOE OSTI2025

MoRE-Brain: Routed Mixture of Experts for Interpretable and Generalizable Cross-Subject fMRI Visual Decoding

Decoding visual experiences from fMRI offers a powerful avenue to understand human perception and develop advanced brain-computer interfaces. However, current progress often prioritizes maximizing reconstruction fidelity while overlooking interpretability, an essential aspect for deriving neuroscientific insight. To address this gap, we propose MoRE-Brain, a neuro-inspired framework designed for high-fidelity, adaptable, and interpretable visual reconstruction. MoRE-Brain uniquely employs a hierarchical Mixture-of-Experts architecture where distinct experts process fMRI signals from functionally related voxel groups, mimicking specialized brain networks. The experts are first trained to encode fMRI into the frozen CLIP space. A finetuned diffusion model then synthesizes images, guided by expert outputs through a novel dual-stage routing mechanism that dynamically weighs expert contributions across the diffusion process. MoRE-Brain offers three main advancements: First, it introduces a novel Mixture-of-Experts architecture grounded in brain network principles for neuro-decoding. Second, it achieves efficient cross-subject generalization by sharing core expert networks while adapting only subject-specific routers. Third, it provides enhanced mechanistic insight, as the explicit routing reveals precisely how different modeled brain regions shape the semantic and spatial attributes of the reconstructed image. Extensive experiments validate MoRE-Brain’s high reconstruction fidelity, with bottleneck analyses further demonstrating its effective utilization of fMRI signals, distinguishing genuine neural decoding from over-reliance on generative priors. Consequently, MoRE-Brain marks a substantial advance towards more generalizable and interpretable fMRI-based visual decoding.

Wei, Yuxiang [Georgia Institute of Technology]↗

NASA NTRS2013

Implementation of a Goal-Based Systems Engineering Process Using the Systems Modeling Language (SysML)

Building upon the purpose, theoretical approach, and use of a Goal-Function Tree (GFT) being presented by Dr. Stephen B. Johnson, described in a related Infotech 2013 ISHM abstract titled "Goal-Function Tree Modeling for Systems Engineering and Fault Management", this paper will describe the core framework used to implement the GFTbased systems engineering process using the Systems Modeling Language (SysML). These two papers are ideally accepted and presented together in the same Infotech session. Statement of problem: SysML, as a tool, is currently not capable of implementing the theoretical approach described within the "Goal-Function Tree Modeling for Systems Engineering and Fault Management" paper cited above. More generally, SysML's current capabilities to model functional decompositions in the rigorous manner required in the GFT approach are limited. The GFT is a new Model-Based Systems Engineering (MBSE) approach to the development of goals and requirements, functions, and its linkage to design. As a growing standard for systems engineering, it is important to develop methods to implement GFT in SysML. Proposed Method of Solution: Many of the central concepts of the SysML language are needed to implement a GFT for large complex systems. In the implementation of those central concepts, the following will be described in detail: changes to the nominal SysML process, model view definitions and examples, diagram definitions and examples, and detailed SysML construct and stereotype definitions.

Patterson, Jonathan D.↗

NASA NTRS2013

Implementation of a Goal-Based Systems Engineering Process Using the Systems Modeling Language (SysML)

Building upon the purpose, theoretical approach, and use of a Goal-Function Tree (GFT) being presented by Dr. Stephen B. Johnson, described in a related Infotech 2013 ISHM abstract titled "Goal-Function Tree Modeling for Systems Engineering and Fault Management", this paper will describe the core framework used to implement the GFTbased systems engineering process using the Systems Modeling Language (SysML). These two papers are ideally accepted and presented together in the same Infotech session. Statement of problem: SysML, as a tool, is currently not capable of implementing the theoretical approach described within the "Goal-Function Tree Modeling for Systems Engineering and Fault Management" paper cited above. More generally, SysML's current capabilities to model functional decompositions in the rigorous manner required in the GFT approach are limited. The GFT is a new Model-Based Systems Engineering (MBSE) approach to the development of goals and requirements, functions, and its linkage to design. As a growing standard for systems engineering, it is important to develop methods to implement GFT in SysML. Proposed Method of Solution: Many of the central concepts of the SysML language are needed to implement a GFT for large complex systems. In the implementation of those central concepts, the following will be described in detail: changes to the nominal SysML process, model view definitions and examples, diagram definitions and examples, and detailed SysML construct and stereotype definitions.

Breckenridge, Jonathan T.↗

NASA NTRS2016

Simulation of Mission Phases

This position with the Simulation and Graphics Branch (ER7) at Johnson Space Center (JSC) provided an introduction to vehicle hardware, mission planning, and simulation design. ER7 supports engineering analysis and flight crew training by providing high-fidelity, real-time graphical simulations in the Systems Engineering Simulator (SES) lab. The primary project assigned by NASA mentor and SES lab manager, Meghan Daley, was to develop a graphical simulation of the rendezvous, proximity operations, and docking (RPOD) phases of flight. The simulation is to include a generic crew/cargo transportation vehicle and a target object in low-Earth orbit (LEO). Various capsule, winged, and lifting body vehicles as well as historical RPOD methods were evaluated during the project analysis phase. JSC core mission to support the International Space Station (ISS), Commercial Crew Program (CCP), and Human Space Flight (HSF) influenced the project specifications. The simulation is characterized as a 30 meter +V Bar and/or -R Bar approach to the target object's docking station. The ISS was selected as the target object and the international Low Impact Docking System (iLIDS) was selected as the docking mechanism. The location of the target object's docking station corresponds with the RPOD methods identified. The simulation design focuses on Guidance, Navigation, and Control (GNC) system architecture models with station keeping and telemetry data processing capabilities. The optical and inertial sensors, reaction control system thrusters, and the docking mechanism selected were based on CCP vehicle manufacturer's current and proposed technologies. A significant amount of independent study and tutorial completion was required for this project. Multiple primary source materials were accessed using the NASA Technical Report Server (NTRS) and reference textbooks were borrowed from the JSC Main Library and International Space Station Library. The Trick Simulation Environment and User Training Materials version 2013.0 release was used to complete the Trick tutorial. Multiple network privilege and repository permission requests were required in order to access previous simulation models. The project was also an introduction to computer programming and the Linux operating system. Basic C++ and Python syntax was used during the completion of the Trick tutorial. Trick's engineering analysis and Monte Carlo simulation capabilities were observed and basic space mission planning procedures were applied in the conceptual design phase. Multiple professional development opportunities were completed in addition to project duties during this internship through the System for Administration, Training, and Education Resources for NASA (SATERN). Topics include: JSC Risk Management Workshop, CCP Risk Management, Basic Radiation Safety Training, X-Ray Radiation Safety, Basic Laser Safety, JSC Export Control, ISS RISE Ambassador, Basic SharePoint 2013, Space Nutrition and Biochemistry, and JSC Personal Protective Equipment. Additionally, this internship afforded the opportunity for formal project presentation and public speaking practice. This was my first experience at a NASA center. After completing this internship I have a much clearer understanding of certain aspects of the agency's processes and procedures, as well as a deeper appreciation from spaceflight simulation design and testing. I will continue to improve my technical skills so that I may have another opportunity to return to NASA and Johnson Space Center.

Carlstrom, Nicholas Mercury↗

NASA NTRS2008

From Informal Safety-Critical Requirements to Property-Driven Formal Validation

Most of the efforts in formal methods have historically been devoted to comparing a design against a set of requirements. The validation of the requirements themselves, however, has often been disregarded, and it can be considered a largely open problem, which poses several challenges. The first challenge is given by the fact that requirements are often written in natural language, and may thus contain a high degree of ambiguity. Despite the progresses in Natural Language Processing techniques, the task of understanding a set of requirements cannot be automatized, and must be carried out by domain experts, who are typically not familiar with formal languages. Furthermore, in order to retain a direct connection with the informal requirements, the formalization cannot follow standard model-based approaches. The second challenge lies in the formal validation of requirements. On one hand, it is not even clear which are the correctness criteria or the high-level properties that the requirements must fulfill. On the other hand, the expressivity of the language used in the formalization may go beyond the theoretical and/or practical capacity of state-of-the-art formal verification. In order to solve these issues, we propose a new methodology that comprises of a chain of steps, each supported by a specific tool. The main steps are the following. First, the informal requirements are split into basic fragments, which are classified into categories, and dependency and generalization relationships among them are identified. Second, the fragments are modeled using a visual language such as UML. The UML diagrams are both syntactically restricted (in order to guarantee a formal semantics), and enriched with a highly controlled natural language (to allow for modeling static and temporal constraints). Third, an automatic formal analysis phase iterates over the modeled requirements, by combining several, complementary techniques: checking consistency; verifying whether the requirements entail some desirable properties; verify whether the requirements are consistent with selected scenarios; diagnosing inconsistencies by identifying inconsistent cores; identifying vacuous requirements; constructing multiple explanations by enabling the fault-tree analysis related to particular fault models; verifying whether the specification is realizable.

Cimatti, Alessandro↗

NASA NTRS2012

Finite Element Models for Electron Beam Freeform Fabrication Process

Electron beam freeform fabrication (EBF3) is a member of an emerging class of direct manufacturing processes known as solid freeform fabrication (SFF); another member of the class is the laser deposition process. Successful application of the EBF3 process requires precise control of a number of process parameters such as the EB power, speed, and metal feed rate in order to ensure thermal management; good fusion between the substrate and the first layer and between successive layers; minimize part distortion and residual stresses; and control the microstructure of the finished product. This is the only effort thus far that has addressed computer simulation of the EBF3 process. The models developed in this effort can assist in reducing the number of trials in the laboratory or on the shop floor while making high-quality parts. With some modifications, their use can be further extended to the simulation of laser, TIG (tungsten inert gas), and other deposition processes. A solid mechanics-based finite element code, ABAQUS, was chosen as the primary engine in developing these models whereas a computational fluid dynamics (CFD) code, Fluent, was used in a support role. Several innovative concepts were developed, some of which are highlighted below. These concepts were implemented in a number of new computer models either in the form of stand-alone programs or as user subroutines for ABAQUS and Fluent codes. A database of thermo-physical, mechanical, fluid, and metallurgical properties of stainless steel 304 was developed. Computing models for Gaussian and raster modes of the electron beam heat input were developed. Also, new schemes were devised to account for the heat sink effect during the deposition process. These innovations, and others, lead to improved models for thermal management and prediction of transient/residual stresses and distortions. Two approaches for the prediction of microstructure were pursued. The first was an empirical approach involving the computation of thermal gradient, solidification rate, and velocity (G,R,V) coupled with the use of a solidification map that should be known a priori. The second approach relies completely on computer simulation. For this purpose a criterion for the prediction of morphology was proposed, which was combined with three alternative models for the prediction of microstructure; one based on solidification kinetics, the second on phase diagram, and the third on differential scanning calorimetry data. The last was found to be the simplest and the most versatile; it can be used with multicomponent alloys and rapid solidification without any additional difficulty. For the purpose of (limited) experimental validation, finite element models developed in this effort were applied to three different shapes made of stainless steel 304 material, designed expressly for this effort with an increasing level of complexity. These finite element models require large computation time, especially when applied to deposits with multiple adjacent beads and layers. This problem can be overcome, to some extent, by the use of fast, multi-core computers. Also, due to their numerical nature coupled with the fact that solid mechanics- based models are being used to represent the material behavior in liquid and vapor phases as well, the models have some inherent approximations that become more pronounced when dealing with multi-bead and multi-layer deposits.

Chandra, Umesh↗

DOE OSTI2025

Physics of Edge-Core Coupling by Inward Turbulence Propagation

The dynamics of edge-core coupling is critically important to the optimization of magnetically confined fusion plasmas. Since early proposals, there has been persistent speculation that inward propagation of turbulence from the boundary is a possible means to energize the edge-core coupling region. However, the detailed mechanism of this process has remained a mystery until recent experiments observed that regular, intense gradient relaxation events generated blob-void pairs very close to the last closed flux surface. Blobs ($\tilde{n}$ >0) propagate outward and detach from the bulk plasma, while voids ($\tilde{n}$ <0) propagate inward, and so stir the core plasma. Here, in this work, we demonstrate that this heretofore ignored process of void emission can drive a broad turbulent layer of width ∼100 𝜌 𝑠 , for typical parameters. The mechanism is the Cherenkov emission of drift waves from inward-propagating voids. The model shows promise to resolve several questions surrounding the shortfall problem and the strong turbulence in the edge-core coupling region.

drift waves↗

DOE OSTI2025

Software Validation Work With The ZPPR-15 Data

The analysis activities for fast reactors involve using many different pieces of software that are relied upon for their predictive capabilities. For this software to be considered reliable, documented proof that the predictions of the software are accurate is required. In this manuscript, the validation work that covers some of the Argonne software used in fast reactor design activities is discussed and displayed. This validation work includes neutron and gamma flux distributions, reaction rate distributions, and reactivity worth. In an ideal world, a reactor development program would have access to a comprehensive set of experimental facilities to help inform the design aspects of the reactor itself. While thermal-hydraulics experiments, and to a limited degree mechanical experiments, can be carried out today for validation needs, neutronics related experimental facilities are rather impractical because of the lack of experimental facilities. Given the desired time table for construction of new reactors, the reconstitution or creation of new neutronic experimental facilities is untenable and thus those reactor development programs must rely upon any available experimental measurements that are qualitatively similar to the design. While a methodology has been proposed to assess the similarity between the past experimental measurements and the reactor itself, that aspect is beyond the scope of this manuscript. In this manuscript, the focus is entirely placed on the analysis results for a series of experiments carried out at the ZPPR facility in Idaho in the mid-1980s. In this regard, this manuscript only shows the validation of the stated neutronics software for specific loadings of the ZPPR reactor. Because of the fuel form, its proposed enrichment, and the material content of the reactor core, the ZPPR-15 experiments were identified as potential validation data for the reactor. The ZPPR-15 experiments were intended as mockups of a 330 MWe Integral Fast Reactor program which was a follow on program to the Clinch River Breeder Reactor. In the ZPPR-15 series of experiments, measurements of the neutron spectrum, control rod worth, sodium void worth, foil reaction rate distributions, Doppler worth of heated samples, gamma dose, and axial expansion worth were all carried out and published. In many cases, these reactivity coefficients are good candidates to validate the reactivity coefficient calculation scheme used by the analysis software and included in the safety analysis activities of fast reactor development projects today. This manuscript discusses the modeling methodology and accuracy of the calculated experimental results using the LANL software MCNP and the ANL software package ARC (Argonne Reactor Codes). As will be shown, for many of the experimental measurements, the two software packages are found to be good predictive analysis tools for those experiments. In other cases, problems with the analysis methodology or underlying cross section data are exposed which indicates where predictive analysis is not as reliable. Finally, in some of the measurements the conclusion is reached that the experimental measurement cannot be reproduced with the analysis software as it is simply too difficult.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2026

Software Validation Work With The ZPPR-15 Data

The analysis activities for fast reactors involve using many different pieces of software that are relied upon for their predictive capabilities. For this software to be considered reliable, documented proof that the predictions of the software are accurate is required. In this manuscript, the validation work that covers some of the Argonne software used in fast reactor design activities is discussed and displayed. This validation work includes neutron and gamma flux distributions, reaction rate distributions, and reactivity worth. In an ideal world, a reactor development program would have access to a comprehensive set of experimental facilities to help inform the design aspects of the reactor itself. While thermal-hydraulics experiments, and to a limited degree mechanical experiments, can be carried out today for validation needs, neutronics related experimental facilities are rather impractical because of the lack of experimental facilities. Given the desired time table for construction of new reactors, the reconstitution or creation of new neutronic experimental facilities is untenable and thus those reactor development programs must rely upon any available experimental measurements that are qualitatively similar to the design. While a methodology has been proposed to assess the similarity between the past experimental measurements and the reactor itself, that aspect is beyond the scope of this manuscript. In this manuscript, the focus is entirely placed on the analysis results for a series of experiments carried out at the ZPPR facility in Idaho in the mid-1980s. In this regard, this manuscript only shows the validation of the stated neutronics software for specific loadings of the ZPPR reactor. Because of the fuel form, its proposed enrichment, and the material content of the reactor core, the ZPPR-15 experiments were identified as potential validation data for the reactor. The ZPPR-15 experiments were intended as mockups of a 330 MWe Integral Fast Reactor program which was a follow on program to the Clinch River Breeder Reactor. In the ZPPR-15 series of experiments, measurements of the neutron spectrum, control rod worth, sodium void worth, foil reaction rate distributions, Doppler worth of heated samples, gamma dose, and axial expansion worth were all carried out and published. In many cases, these reactivity coefficients are good candidates to validate the reactivity coefficient calculation scheme used by the analysis software and included in the safety analysis activities of fast reactor development projects today. This manuscript discusses the modeling methodology and accuracy of the calculated experimental results using the LANL software MCNP and the ANL software package ARC (Argonne Reactor Codes). As will be shown, for many of the experimental measurements, the two software packages are found to be good predictive analysis tools for those experiments. In other cases, problems with the analysis methodology or underlying cross section data are exposed which indicates where predictive analysis is not as reliable. Finally, in some of the measurements the conclusion is reached that the experimental measurement cannot be reproduced with the analysis software as it is simply too difficult.

Aliberti, Gerardo↗

NASA NTRS1999

Monte Carlo Simulation of Nanoparticle Encapsulation in Flames

Two critical challenges facing the application of flames for synthesis of nanopowder materials are: (1) overcoming formation of agglomerates and (2) ensuring that the highly reactive nanopowders that are synthesized in flames can be produced in such a manner that their purity is maintained during subsequent processing. Agglomerates are produced in flames because particle formation occurs in a high temperature and high number density environment. They are undesirable in most advanced applications of powders. For example, agglomerates have a deleterious effect on compaction density, leading to voids when nanopowders are consolidated. Efforts to avoid agglomeration in flames without substantially reducing particle number density and, consequently, production rate, have had limited success. Powder purity must also be maintained during subsequent handling of nanopowders and this poses a significant challenge for any synthesis route because nanopowders, particularly metals and non-oxide ceramic powders, are inherently reactive. Impurities acquired during handling of nanopowders have slowed the advancement of the nanostructured materials industry. One promising approach that has been proposed to address these problems is nano-encapsulation. In this approach, the core particles are encapsulated in a removable material while they are within the flame but before excessive agglomeration has occurred. Condensation can be very rapid so that core particles are trapped within the condensed material and agglomeration is limited. Nano-encapsulation also addresses the handling concerns for post-synthesis processing. Results have shown that when nano-encapsulated powders are exposed to atmosphere the core particles are protected from oxidation and/or hydrolysis. Thus, handling of the powders does not require extreme care. If, for example, at the time of consolidation the encapsulation material is removed by vacuum annealing, the resulting powder remains unagglomerated and free of impurities. In this work, we described a novel aerosol model that has been developed to simulate particle encapsulation in flames. The model will ultimately be coupled to a one-dimensional spherical flame code and compared to results from microgravity flame experiments.

Sun, Z.↗