Search NASA⌕ Search

SEARCH · Search NASA

Results for “correlation selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Measurement of the inclusive isolated prompt photon cross-section in p p collisions at s = 7 TeV using 35 pb − 1 of ATLAS data

CERN-LHC. Measurement of the inclusive production of isolated prompt photons in proton-proton collisions at a centre-of-mass energy of 7 TeV. The data sample used has an integrated luminosity of 35 pb-1. Photons are isolated if the total transverse energy in a cone (in phi,eta space) of radius R=0.4 is less than a cut value of 4 GeV. The four systematic errors shown in the tables represent, respectively, the uncertainties in (1) the purity measurment, (2) the photon selection and identification efficiency, (3) the correlation between the efficiency and purity determination and (4) the unfolding process. The luminosity uncertainty of 3.4% is shown separately.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

FINAL REPORT

Excellent progress was made in standardizing three complementary methods: Magnetic resonance imaging, x-ray micro CT, and MALDI imaging linear ion trap mass spectroscopy to image biomass and chemical, anatomical and functional changes that occur during pretreatment and hydrolysis. Magnetic resonance microscopy provides excellent images with as low as 5 uM resolution with hydrated biomass samples. We visualized dramatic changes in signal associated with the hydrolysis of the carbohydrates by strong acids. Quantitative diffusion approaches were used to probe more subtle structural changes in biomass. Diffusion tensor calculations reflect diffusion anisotropy and fractional anisotropy maps clearly show the longer range diffusion within the vessels compared to within the fiber cells. The diffusion is increased along the cell walls of the vessels. Suggesting that further research with NMR imaging should be pursued. X-ray CT provides excellent images at as low as 3.5 uM resolution from dried biomass. Small increases in surface area, and decreases in local density have been quantified in with wood after mild pretreatments; these changes are expected to be underestimates of the hydrated wood, due to the ~12% shrinkage that occurs upon drying untreated wood. MALDI-MS spectra show high ion intensities at most mass to charge ratios in untreated and pretreated woody material. MALDI-MSn is required to improve specificity and reduce background for imaging. MALDI-TOF is not specific enough for carbohydrate identification. Using MALDI-LIT/MSn we can readily identify oligomeric glucans and xylans and their fragmentation patterns as well as those of the glucuronic acid side chains of birch 4-O-methyl glucuronxylan. Imaging of glucan and xylan oligomers show that many contain isobaric ions with different distributions, indicating again that MSn is needed for accurate imaging of lignocellulosic materials. We are now starting to integrate the three imaging methods by using the same set of biomass samples imaged with all three methods, and using common analytical software to quantify parameters from the three dimensional images. In addition to the proposed experiments, we conducted imaging studies with a novel TOF-SIMS instrument available through collaborations with the AMOLF goup led by Ron Heeren at the FOM Institute in Amersterdam, Netherlands. ToF-SIMS was used to image intact cross sections of Populus stems with high spatial resolution, chemically selectivity. ToF-SIMS images were correlated with fluorescence microscopy which allowed for more positive ion identification.

09 BIOMASS FUELS↗

Chemical Composition Analysis and Product Consistency Tests of the ORP Phase 6 Nepheline Study Glasses

In this report, Savannah River National Laboratory (SRNL) provides chemical analyses and Product Consistency Test (PCT) results for a series of simulated high-level waste (HLW) glass compositions fabricated at Pacific Northwest National Laboratory (PNNL). The results of this effort will improve the ability to predict the impacts of glass composition and nepheline crystallization on the durability of HLW glasses. Chemical analyses were performed on a representative sample of each of the quenched glasses to allow for comparisons with the targeted compositions. A review of the individual glass composition measurements identified no analytical issues of concern. Minor differences between the targeted and measured concentrations of some of the baseline glass components were noted, including some high values for Fe 2 O 3 , and some low values for Al 2 O 3 , Li 2 O, Na 2 O and P 2 O 5 . The PCT Method-A was performed in triplicate on each of the quenched and canister centerline cooled (CCC) versions of the glasses to assess chemical durability. A review of the leachate analyses and standard solution data identified no issues with the analytical methods. Some of the CCC versions of the study glasses have normalized concentration for boron (NC B ) values that are higher than the Environmental Assessment glass benchmark NC B value of 16.695 g/L. For some of the study glasses, the NC B values were higher after the CCC heat treatment. The normalized concentrations for lithium and sodium (NC Li and NC Na ) followed this same trend. For many of these glasses, the changes in the normalized concentration for silicon (NC Si ) values were not congruent with the changes in NC B , NC Li , and NC Na values. It may be valuable for PNNL to perform a more complete review of the influence of composition and heat treatment on the PCT responses of the glasses described in this report to draw further conclusions, including any potential correlations with the methods used in selecting these glass compositions for study.

36 MATERIALS SCIENCE↗

NMDQi Thermal-hydraulic Optimization, Analysis, and Scoping Tool (TOAST)

The Thermal-hydraulic Optimization, Analysis, and Scoping Tool (TOAST) is developed to support the thermal-hydraulic aspects for the design of optimal irradiation vehicles for the Nuclear Materials Discovery and Qualification initiative (NMDQi). TOAST is currently a MATLAB-based tool that utilizes a simplified steady-state analytical model where a radial thermal resistance circuit is utilized to account for conduction through up to 2 capsules, a gas gap, a thermal bond, a sample cladding, and a sample, as well as the convection from a water coolant outside the capsules. The geometry is discretized axially along the user-defined height of a basket with a user-defined number of points/nodes, essentially turning TOAST into a semi-2D heat transfer analysis utility for cylindrical irradiation vehicles with practically any configuration, solving for temperatures radially at multiple axial locations. TOAST utilizes a Graphical User Interface (GUI) in-which a user can define the geometrical layout, the materials utilized for each component, the coolant characteristics, and the required solution. The user can define the geometry by inputting the diameters, thicknesses, and heights for each component, whereas the materials are defined via the user-provided constant or variable thermal conductivities. The user can select the coolant's inlet temperature, pressure, and the pressure drop across the height of the problem (which is used to calculate the velocity of the flow). Finally, the user can choose to solve for a sample heat generation rate limit by inputting temperature limits for the sample and capsules or can choose to purely solve for the axial temperature distributions of each component by inputting a pre-selected heat generation rate. Either way, TOAST provides the user with axial temperature distributions of all the components including the coolant, and the heat generation rate limit as well as the maximum outlet coolant temperature. The user can also choose to do one of 6 sensitivity analyses in TOAST. The sensitivity analyses yield plots of the sensitivity of the heat generation rate limit, the maximum coolant temperature, and the pressure limit for the annular components due to perturbations in 1-2 unknown variables based on the selected sensitivity analysis. Benchmarks between computations in TOAST and equivalent 2D axis symmetric ABAQUS models are presented, showing that TOAST results are within less than 3% of ABAQUS results in most cases, and a maximum of 8% difference in some cases. The benchmarks also revealed that this uncertainty is tied to the selection of an appropriate Nusselt number correlation and appropriate thermal conductivities, which the user can do from the GUI. Regardless, TOAST is demonstrated as a computationally efficient, highly accessible, and accurate utility for optimization and scoping s of studies different irradiation vehicles.

42 ENGINEERING↗

Quality Ranking of Unary Fluoride Salt Property Data in MSTDB-TP

Molten salt reactor developers rely on thermal property data to design, license and operate the reactors they are developing. The Molten Salt Thermal Database-Thermophysical Properties (MSTDB-TP) is being developed under the DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program and managed by Oak Ridge National Laboratory. The MSTDB-TP is intended to serve as a single source of measured thermophysical property values for a wide variety of molten salt systems available to researchers, molten salt reactor developers, and regulators. These properties include melting and boiling points, heat capacity, density, viscosity and thermal diffusivity and conductivity. Published measurements of molten salt properties are lacking for many salts and the data that are available are often inconsistent. This creates a challenge for MSR developers in determining which property values to select when designing their reactors. The MSDTDB-TP collects all available property data and down-selects to preferred data sets or correlations. It is the purpose of this work to apply a recently developed ranking system that indicates the quality of property values listed in the database to inform decisions about how to use the available data. Quality assessments and rankings are being applied to data in MSTDB-TP to provide an indication of the quality of the data available. A previous report detailed the ranking system that was followed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Cost Analysis and Projections for U.S.-Manufactured Automotive Lithium-ion Batteries

This document reports on a study conducted to estimate the cost of U.S-produced automotive battery packs for model years (MY) 2023 to 2035, using Argonne National Laboratory’s BatPaC tool. The costs were estimated by designing batteries for several classes of vehicles for four discrete model years (2023, 2026, 2030, and 2035), where a representative battery technology and material prices are selected based on information available today. Correlations were developed from the four discrete years to enable annual pack cost estimates as a function of pack size (kWh) and model year. A consolidated cost curve was then developed that includes battery size, technology by model year, and the anticipated sales volumes of each class of vehicles over the years. This cost curve estimates the volume-averaged, U.S.-manufactured battery pack cost of PHEVs and BEVs in the United States to be $\$140$/kWh for the model year 2023, which will reduce to $\$86$/kWh in MY2035. Applying tax credits from section 45X of the Inflation Reduction Act can further reduce the average pack cost to as low as $\$56$/kWh in MY2029. The report also includes several sensitivity studies that investigate the effect of pack production volume, material prices, fast charge requirements, and labor rates.

25 ENERGY STORAGE↗

Modeling Redshift-space Clustering with Abundance Matching

Abstract We explore the degrees of freedom required to jointly fit projected and redshift-space clustering of galaxies selected in three bins of stellar mass from the Sloan Digital Sky Survey Main Galaxy Sample (SDSS MGS) using a subhalo abundance matching (SHAM) model. We employ emulators for relevant clustering statistics in order to facilitate our analysis, leading to large speed gains with minimal loss of accuracy. We are able to simultaneously fit the projected and redshift-space clustering of the two most massive galaxy samples that we consider with just two free parameters: scatter in stellar mass at fixed SHAM proxy, and the dependence of the SHAM proxy on dark matter halo concentration. We find some evidence for models that include velocity bias, but including orphan galaxies improves our fits to the lower-mass samples significantly. We also model the clustering signals of specific star formation rate (sSFR) selected samples using conditional abundance matching (CAM). We obtain acceptable fits to projected and redshift-space clustering as a function of sSFR and stellar mass using two CAM variants, although the fits are worse than for stellar-mass-selected samples alone. By incorporating nonunity correlations between the CAM proxy and sSFR, we are able to resolve previously identified discrepancies between CAM predictions and SDSS observations of the environmental dependence of quenching for isolated central galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗

Farpoint: A High-resolution Cosmology Simulation at the Gigaparsec Scale

Abstract In this paper we introduce the Farpoint simulation, the latest member of the Hardware/Hybrid Accelerated Cosmology Code (HACC) gravity-only simulation family. The domain covers a volume of (1000 h −1 Mpc) 3 and evolves close to two trillion particles, corresponding to a mass resolution of m p ∼ 4.6 × 10 7 h −1 M ⊙ . These specifications enable comprehensive investigations of the galaxy–halo connection, capturing halos down to small masses. Further, the large volume resolves scales typical of modern surveys with good statistical coverage of high-mass halos. The simulation was carried out on the GPU-accelerated system Summit, one of the fastest supercomputers currently available. We provide specifics about the Farpoint run and present an initial set of results. The high mass resolution facilitates precise measurements of important global statistics, such as the halo concentration–mass relation and the correlation function down to small scales. Selected subsets of the simulation data products are publicly available via the HACC Simulation Data Portal.

79 ASTRONOMY AND ASTROPHYSICS↗

UNDERSTANDING AGN-HOST CONNECTION IN PARTIALLY OBSCURED ACTIVE GALACTIC NUCLEI. III. PROPERTIES OF ROSAT-SELECTED SDSS ACTIVE GALACTIC NUCLEI

As the third paper of our series of studies that aim at examining the AGN-host co-evolution by using partially obscured active galactic nuclei (AGNs), we extend the broad-line composite galaxies (composite AGNs) into ROSAT-selected Seyfert 1.8/1.9 galaxies based upon the ROSAT All Sky Survey/Sloan Digital Sky Survey Data Release 5 (SDSS-DR5) catalog given by Anderson et al. The SDSS spectra of a total of 92 objects are analyzed by the same method used in our previous studies, after requiring the signal-to-noise ratio in the SDSS r' band to be larger than 20. Combining the ROSAT-selected Seyfert galaxies with the composite AGNs reinforces the tight correlation between the line ratio [O I]/H{alpha} versus D{sub n} (4000), and establishes a new tight correlation between [S II]/H{alpha} versus D{sub n} (4000). Both correlations suggest that the two line ratios are plausible age indicators of the circumnuclear stellar population for typical Type I AGNs in which the stellar populations are difficult to derive from their optical spectra. The ROSAT-selected Seyfert galaxies show that the two correlations depend on the soft X-ray spectral slope {alpha} {sub X}, which is roughly estimated from the hardness ratios by requiring that the X-ray count rates within 0.1-2.4 keV be larger than 0.02 counts s{sup -1}. However, we fail to establish a relationship between {alpha} {sub X} and D{sub n} (4000), which is likely caused by the relatively large uncertainties of both the parameters (especially for {alpha} {sub X} because of the AGN intrinsic obscuration). The previously established L/L {sub Edd}-D{sub n} (4000) evolutionary sequence is reinforced again by the extension to the ROSAT-selected Seyfert galaxies. These X-ray-selected Seyfert galaxies are, however, biased against the two ends of the sequence, which implies that the X-ray Seyfert galaxies present a population at a middle evolutionary stage.

79 ASTRONOMY AND ASTROPHYSICS↗

Cool circumgalactic gas in galaxy clusters: connecting the DESI legacy imaging survey and SDSS DR16 Mg ιι absorbers

Herein we investigate the cool gas absorption in galaxy clusters by cross-correlating Mg II absorbers detected in quasar spectra from data release 16 of the Sloan Digital Sky Survey (SDSS) with galaxy clusters identified in the Dark Energy Spectroscopic Instrument (DESI) survey. We find significant covering fractions (⁠1–5percent within r 500 , depending on the chosen redshift interval), ~4–5 times higher than around random sightlines. While the covering fraction of cool gas in clusters decreases with increasing mass of the central galaxy, the total Mg II mass within r 500 is none the less ~10 times higher than for SDSS luminous red galaxies. The Mg II covering fraction versus impact parameter is well described by a power law in the inner regions and an exponential function at larger distances. The characteristic scale of the transition between these two regimes is smaller for large equivalent width absorbers. Cross-correlating Mg II absorption with photo–z selected cluster member galaxies from DESI reveals a statistically significant connection. The median projected distance between Mg II absorbers and the nearest cluster member is ~200 kpc, compared to ~500 kpc in random mocks with the same galaxy density profiles. We do not find a correlation between Mg II strength and the star formation rate of the closest cluster neighbour. This suggests that cool gas in clusters, as traced by Mg II absorption, is: (i) associated with satellite galaxies, (ii) dominated by cold gas clouds in the intracluster medium, rather than by the interstellar medium of galaxies, and (iii) may originate in part from gas stripped from these cluster satellites in the past.

79 ASTRONOMY AND ASTROPHYSICS↗

Feature selection and causal analysis for microbiome studies in the presence of confounding using standardization

Abstract Background Microbiome studies have uncovered associations between microbes and human, animal, and plant health outcomes. This has led to an interest in developing microbial interventions for treatment of disease and optimization of crop yields which requires identification of microbiome features that impact the outcome in the population of interest. That task is challenging because of the high dimensionality of microbiome data and the confounding that results from the complex and dynamic interactions among host, environment, and microbiome. In the presence of such confounding, variable selection and estimation procedures may have unsatisfactory performance in identifying microbial features with an effect on the outcome. Results In this manuscript, we aim to estimate population-level effects of individual microbiome features while controlling for confounding by a categorical variable. Due to the high dimensionality and confounding-induced correlation between features, we propose feature screening, selection, and estimation conditional on each stratum of the confounder followed by a standardization approach to estimation of population-level effects of individual features. Comprehensive simulation studies demonstrate the advantages of our approach in recovering relevant features. Utilizing a potential-outcomes framework, we outline assumptions required to ascribe causal, rather than associational, interpretations to the identified microbiome effects. We conducted an agricultural study of the rhizosphere microbiome of sorghum in which nitrogen fertilizer application is a confounding variable. In this study, the proposed approach identified microbial taxa that are consistent with biological understanding of potential plant-microbe interactions. Conclusions Standardization enables more accurate identification of individual microbiome features with an effect on the outcome of interest compared to other variable selection and estimation procedures when there is confounding by a categorical variable.

59 BASIC BIOLOGICAL SCIENCES↗

Data-Driven State of Health Estimation for Second-Life Batteries Using Interpolated Synthetic Data and Feature Selection

Accurate estimation of the State of Health (SOH) for second-life batteries (SLBs) is crucial given their increasing use in energy storage applications. Precise SOH prediction is essential for safe operation and robust battery management systems. A major challenge is the limited availability of datasets for building reliable degradation models. To address this, synthetic data generation through linear interpolation is performed to extend the available data, making it more representative of real-world battery operating conditions. By analyzing feature correlation with SOH, the most relevant features are selected for the model. The proposed approach employs a convolutional neural network (CNN) model trained on this interpolated, feature-selected dataset, using time series data of voltage, temperature, and current over a cycle. By focusing on highly correlated features, the model achieves over 95% accuracy, with mean absolute error and root mean squared error up to 2.27% and 2.64%, respectively, in SOH estimation for two battery datasets tested. These results highlight the potential of combining synthetic data generation and feature selection to enhance SOH predictions, showcasing the superior performance of the proposed CNN model for both new batteries and SLBs.

feature selection↗

Electrical Control of Spin and Valley in Spin-Orbit Coupled Graphene Multilayers

Electrical control of magnetism has been a major technological pursuit of the spintronics community, owing to its far-reaching implications for data storage and transmission. Here, in this study, we propose and analyze a new mechanism for electrical switching of isospin, using chiral-stacked graphene multilayers, such as Bernal bilayer graphene or rhombohedral trilayer graphene, encapsulated by transition metal dichalcogenide (TMD) substrates. Leveraging the proximity-induced spin-orbit coupling from the TMD, we demonstrate electrical switching of correlation-induced spin and/or valley polarization, by reversing a perpendicular displacement field or the chemical potential. We substantiate our proposal with both analytical arguments and self-consistent Hartree-Fock numerics. Finally, we illustrate how the relative alignment of the TMDs, together with the top and bottom gate voltages, can be used to selectively switch distinct isospin flavors, putting forward correlated Van der Waals heterostructures as a promising platform for spintronics and valleytronics.

36 MATERIALS SCIENCE↗

LINKING SHORT GAMMA-RAY BURSTS AND THEIR HOST GALAXIES

The luminosities of short-duration gamma-ray burst (SGRB) host galaxies appear to be anticorrelated with both the isotropic equivalent gamma-ray energy and the gamma-ray luminosity of the explosions, based on a sample of 12 bursts with host galaxy redshifts and photometry. The correlation does depend on the correct identification of the GRB 050509b host, but is otherwise robust. In particular, simple observational selection effects only strengthen the statistical significance of this correlation, from approx95% to approx99%. The correlation may indicate that there are two physically distinct groups of SGRBs. If so, it requires that the more luminous class of explosions be associated with the younger class of progenitors. Alternatively, it could be due to a continuous distribution of burst and host properties, in which case it could be used as a crude SGRB distance indicator. As one possible explanation, we find that the effect of binary neutron star masses on inspiral time and energy reservoir produces a correlation of the appropriate sign, but does not automatically reproduce the correlation slope or the full range of SGRB energy scales. If confirmed by larger samples, this correlation will provide a valuable new constraint on SGRB progenitor models.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE RADIO AND OPTICAL LUMINOSITY EVOLUTION OF QUASARS

We calculate simultaneously the radio and optical luminosity evolutions of quasars, and the distribution in radio loudness R defined as the ratio of radio and optical luminosities, using a flux-limited data set containing 636 quasars with radio and optical fluxes from White et al. We first note that when dealing with multi-variate data it is imperative to first determine the true correlations among the variables, not those introduced by the observational selection effects, before obtaining the individual distributions of the variables. We use the methods developed by Efron and Petrosian which are designed to obtain unbiased correlations, distributions, and evolution with redshift from a data set truncated due to observational biases. It is found that the population of quasars exhibits strong positive correlation between the radio and optical luminosities. With this correlation, whether intrinsic or observationally induced accounted for, we find that there is a strong luminosity evolution with redshift in both wavebands, with significantly higher radio than optical evolution. We conclude that the luminosity evolution obtained by arbitrarily separating the sources into radio-loud (R > 10) and radio-quiet (R < 10) populations introduces significant biases that skew the result considerably. We also construct the local radio and optical luminosity functions and the density evolution. Finally, we consider the distribution of the radio-loudness parameter R obtained from careful treatment of the selection effects and luminosity evolutions with that obtained from the raw data without such considerations. We find a significant difference between the two distributions and no clear sign of bi-modality in the true distribution for the range of R values considered. Our results indicate therefore, somewhat surprisingly, that there is no critical switch in the efficiency of the production of disk outflows/jets between very radio-quiet and very radio-loud quasars, but rather a smooth transition. Also, this efficiency seems higher for the high-redshift and more luminous sources in the sample considered.

79 ASTRONOMY AND ASTROPHYSICS↗

A Novel Data Segmentation Method for Data-driven Phase Identification

This paper presents a smart meter phase identification algorithm for two cases: meter-phase-label-known and meter-phase-label-unknown. To improve the identification accuracy, a data segmentation method is proposed to exclude data segments that are collected when the voltage correlation between smart meters on the same phase is weakened. Then, using the selected data segments, a hierarchical clustering method is used to calculate the correlation distances and cluster the smart meters. If the phase labels are unknown, a Connected-Triple-based Similarity (CTS) method is adapted to further improve the phase identification accuracy of the ensemble clustering method. The methods are developed and tested on both synthetic and real feeder data sets. Here, simulation results show that the proposed phase identification algorithm outperforms the state-of-the-art methods in both accuracy and robustness.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Modelling the impact of host galaxy dust on type Ia supernova distance measurements

Type Ia Supernovae (SNe Ia) are a critical tool in measuring the accelerating expansion of the universe. Recent efforts to improve these standard candles have focused on incorporating the effects of dust on distance measurements with SNe Ia. In this paper, we use the state-of-the-art Dark Energy Survey 5 year sample to evaluate two different families of dust models: empirical extinction models derived from SNe Ia data and physical attenuation models from the spectra of galaxies. In this work, we use realistic simulations of SNe Ia to forward-model different models of dust and compare summary statistics in order to test different assumptions and impacts on SNe Ia data. Among the SNe Ia-derived models, we find that a logistic function of the total-to-selective extinction R V best recreates the correlations between supernova distance measurements and host galaxy properties, though an additional 0.02 mag of grey scatter is needed to fully explain the scatter in SNIa brightness in all cases. These empirically derived extinction distributions are highly incompatible with the physical attenuation models from galactic spectral measurements. From these results, we conclude that SNe Ia must either preferentially select extreme ends of galactic dust distributions, or that the characterization of dust along the SNe Ia line-of-sight is incompatible with that of galactic dust distributions.

79 ASTRONOMY AND ASTROPHYSICS↗

Effects of Lewis acidity of metal oxide promoters on the activity and selectivity of Co-based Fischer–Tropsch synthesis catalysts

Metal oxides of Ce, Gd, La, Mn, and Zr were investigated as promoters for improving the activity and selectivity of Co-based FTS catalysts. The extent to which these promoters decrease the selectivity toward CH 4 and increase the selectivity toward C 5+ hydrocarbons was found to depend on both the loading and the composition of the oxide promoter. Elemental mapping by STEM–EDS revealed that the propensity for a given metal oxide to associate with Co affects the sensitivity of the product distribution to changes in promoter loading. For all promoters, a sufficiently high loading resulted in the product distributions becoming insensitive to further increases in promoter loading, very likely due to the formation of a half monolayer of promoter oxide over the Co surface. Simulations suggest that the fraction of Co active sites that are adjacent to the promoter moieties approaches unity at this degree of coverage. The oxidation state of the promoter metal cation under reaction conditions, determined by in situ XANES measurements, was used to calculate relative Lewis acidity of the promoter metal cation. A strong positive correlation was found between the C 5+ product selectivity and the Lewis acidity of the promoter metal cations, suggesting that the promotional effects are a consequence of Lewis acid–base interactions between the reaction intermediates and the promoter metal cations. Rate data obtained at different pressures were used to estimate the apparent rate coefficient and the CO adsorption constant appearing in the Langmuir–Hinshelwood expression that describes the CO consumption kinetics for both unpromoted and the metal oxide-promoted catalysts. Both parameters exhibited positive correlations with the promoter Lewis acidity. In conclusion, these results are consistent with the hypothesis that the metal cations of the promoter act as Lewis acids that interact with the O atom of adsorbed CO to facilitate CO adsorption and dissociation.

Johnson, Gregory R.↗