Search NASA⌕ Search

SEARCH · Search NASA

Results for “crystal zoning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Recycling of lower continental crust through foundering of cumulates from contaminated mafic intrusions

A mechanism is presented for recycling of lower continental material back into the mantle. Picritic magmas, possible parental to volumious continental volcanics such as the Karoo and Deccan, became trapped at the Moho, where they interacted with and become contaminated by lower crustal materials. Upon crystallization, the magmas differentiated into lower ultramafic cumulate zones and upper gabbroic-anorthositic zones. The ultramafic cumulates are denser than underlying mantle and sink, carrying lower crustal components as trapped liquid, as xenoliths or rafts, and as constituents of cumulate minerals. This model provides a potentially significant crust-mantle differentiation mechanism, and may also represent a contributing factor in crustal recycling, possibly important in producing some OIB reservoirs.

Arndt, Nicholas T.↗
NASA NTRS1988

Numerical simulation of heat transfer during the crystal growth of HgCdTe alloys

The effects of growth parameters on the thermal distribution during a Bridgman-Stockbarger-type crystal growth of HgCdTe alloys using short gradient zones are analyzed numerically. The analysis takes into account the change in the thermophysical properties upon freezing and considers both the temperature and composition dependences of the properties as well as translation rate effects. The calculated results compare favorably with previously published empirical results.

Dakhoul, Y. M.↗
NASA NTRS1992

Chemical compatibility of cartridge materials

The objectives were to determine the chemical compatibility of titanium-zirconium-molybdenum (TZM) with GaAs and CdZnTe, and Inconel with HgCdTe and HgZnTe. At the present time, no other studies regarding the compatibility of these crystal components and their respective cartridge materials have been performed. This study was to identify any possible problems between these materials to insure proper containment of possibly hazardous fumes during crystal growth experiments. In this study, the reaction zone between the materials was studied and the amount of degradation to the system was measured. Detailed results are presented.

Ambrose, Bryan↗
NASA NTRS2009

Stability of Detached Solidification

Bridgman crystal growth can be conducted in the so-called "detached" solidification regime, where the growing crystal is detached from the crucible wall. A small gap between the growing crystal and the crucible wall, of the order of 100 micrometers or less, can be maintained during the process. A meniscus is formed at the bottom of the melt between the crystal and crucible wall. Under proper conditions, growth can proceed without collapsing the meniscus. The meniscus shape plays a key role in stabilizing the process. Thermal and other process parameters can also affect the geometrical steady-state stability conditions of solidification. The dynamic stability theory of the shaped crystal growth process has been developed by Tatarchenko. It consists of finding a simplified autonomous set of differential equations for the radius, height, and possibly other process parameters. The problem then reduces to analyzing a system of first order linear differential equations for stability. Here we apply a modified version of this theory for a particular case of detached solidification. Approximate analytical formulas as well as accurate numerical values for the capillary stability coefficients are presented. They display an unexpected singularity as a function of pressure differential. A novel approach to study the thermal field effects on the crystal shape stability has been proposed. In essence, it rectifies the unphysical assumption of the model that utilizes a perturbation of the crystal radius along the axis as being instantaneous. It consists of introducing time delay effects into the mathematical description and leads, in general, to stability over a broader parameter range. We believe that this novel treatment can be advantageously implemented in stability analyses of other crystal growth techniques such as Czochralski and float zone methods.

Mazuruk, K.↗
DOE OSTI2021

Observation of bound states in the continuum embedded in symmetry bandgaps

In the past decade, symmetry-protected bound states in the continuum (BICs) have proven to be an important design principle for creating and enhancing devices reliant upon states with high-quality (Q) factors, such as sensors, lasers, and those for harmonic generation. However, as we show, current implementations of symmetry-protected BICs in photonic crystal slabs can only be found at the center of the Brillouin zone and below the Bragg diffraction limit, which fundamentally restricts their use to single-frequency applications. By microprinting a three-dimensional (3D) photonic crystal structure using two-photon polymerization, we demonstrate that this limitation can be overcome by altering the radiative environment surrounding the slab to be a 3D photonic crystal. This allows for the protection of a line of BICs by embedding it in a symmetry bandgap of the crystal. This concept substantially expands the design freedom available for developing next-generation devices with high-Q states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Lattice anharmonicity effects in fluorite oxide single crystals and anomalous increase in phonon lifetime in ceria at elevated temperature

Here, we investigate the temperature dependence of the frequency and linewidth of the triply degenerate T 2g zone-centered optical phonon in flux-grown ceria and hydrothermally synthesized thoria single crystals from room temperature to 1273 K using Raman spectroscopy. Both crystals exhibit an expected increase in the phonon linewidth with temperature due to enhanced phonon–phonon scattering. However, ceria displays an anomalous linewidth reduction in the temperature range of 1023–1123 K. First-principles phonon linewidth calculations considering cubic and quartic phonon interactions within temperature-independent phonon dispersion fail to describe this anomaly. A parameterization of the temperature-dependent second-order interatomic force constants based on previously reported phonon dispersion measured at room and high temperatures predicts a deviation from the monotonic linewidth increase, albeit at temperatures lower than those observed experimentally for ceria. The qualitative agreement in the trend of temperature-dependent linewidth suggests that lattice anharmonicity-induced phonon renormalization plays a role in phonon lifetime. Specifically, a change in the overlap between softened acoustic and optical branches in the dispersion curve reduces the available phonon scattering phase space of the Raman-active mode at the zone center, leading to an increased phonon lifetime within a narrow temperature interval. These findings provide insights into higher-order anharmonic interactions in ceria and thoria, motivating further investigations into the role of anharmonicity-induced phonon renormalization on phonon lifetimes at high temperatures.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1991

Computed stress fields in GaAs during vertical Bridgman growth

The thermoelastic stress field of GaAs crystals grown by the vertical Bridgman method has been approximated using a linear elastic, axisymmetric stress model. The model included the effects due to the thermal field and the gravitational field, as well as the interaction with the ampoule, but did not fully account for the elastic anisotropy of the crystal. Realistic thermal fields for different furnace temperatures and insulation zone thicknesses were computed with a similar model. The difference between the Von Mises stress and the critical resolved shear stress (CRSS) was used as a measure of the number of dislocations present. Different sets of growth parameters were examined to determine which produced the lowest amount of stress in the crystal. Results show that the crystal-ampoule interaction is the most important parameter in dislocation generation. In addition, for the same sticking boundary conditions, concave interfaces have lower stress than convex interfaces.

Rosch, William↗
NASA NTRS2001

Single-Crystal Elastic Constants of Yttria (Y2O3) Measured to High Temperatures

Yttria, or yttrium sesquioxide (Y2O3), has been considered for use in nuclear applications and has gained interest relatively recently for use in infrared optics. Single crystals of yttria have been grown successfully at the NASA Glenn Research Center using a laser-heated float zone technique in a fiber and rod. Such samples allow measurement of the single-crystal elastic properties, and these measurements provide useful property data for the design of components using single crystals. They also yield information as to what degree the elastic properties of yttria ceramics are a result of the intrinsic properties of the yttria crystal in comparison to characteristics that may depend on processing, such as microstructure and intergranular phases, which are common in sintered yttria. The single-crystal elastic moduli are valuable for designing such optical components. In particular, the temperature derivatives of elastic moduli allow the dimensional changes due to heating under physical constraints, as well as acoustic excitation, to be determined. The single-crystal elastic moduli of yttria were measured by Brillouin spectroscopy up to 1200 C. The room-temperature values obtained were C(sub 11) = 223.6 + 0.6 GPa, C(sub 44) = 74.6 + 0.5 GPa, and C(sub 12) = 112.4 + 1.0 GPa. The resulting bulk and (Voigt-Reuss-Hill) shear moduli were K = 149.5 + 1.0 GPa and G(sub VRH) = 66.3 + 0.8 GPa, respectively. Linear least-squares regressions to the variation of bulk and shear moduli with temperature resulted in derivatives of dK/dT = -17 + 2 MPa/C and dG(sub VRH)/dT = -8 + 2 MPa/ C. Elastic anisotropy was found to remain essentially constant over the temperature range studied.

Sayir, Ali↗
NASA NTRS1980

Controlled cooling and crystallization of a eucrite - Microprobe studies

The paper presents microprobe data on controlled cooling experiments on the eucrite meteorite Stannern, with emphasis on pyroxene zoning and chemistry, development of immiscible liquids in the mesostasis, and compositional boundary layer development adjacent to crystals. Controlled cooling rate experiments on melted samples of the meteorite yield a variety of petrographic textures that can be related to the cooling rate. Textures of clasts in Stannern suggest natural cooling rates of .1 to 100 C/hr for various clasts in the meteorite. Residual liquids are found to unmix at temperatures below about 990 C at moderate cooling rates. Results indicate that Stannern's pyroxenes have evidently undergone subsolidus internal cation exchange, thereby removing Fe-Mg variation in pyroxenes, lowering Al contents, and promoting exosolution.

Powell, M. A.↗
NASA NTRS1993

Crystal growth of compound semiconductors in a low-gravity environment (InGaAs crystals) (M-22)

Compound semiconductor crystals, such as gallium arsenide and indium phosphide crystals, have many interesting properties that silicon crystals lack, and they are expected to be used as materials for optic and/or electro-optic integrated devices. Generally speaking, alloy semiconductors, which consist of more than three elements, demonstrate new functions. For example, values of important parameters, such as lattice constant and emission wavelength, can be chosen independently. However, as it is easy for macroscopic and/or microscopic fluctuations of composition to occur in alloy semiconductor crystals, it is difficult to obtain crystals having homogeneous properties. Macroscopic change of composition in a crystal is caused by the segregation phenomenon. This phenomenon is due to a continuous change in the concentration of constituent elements at the solid-liquid interfacing during solidification. On Earth, attempts were made to obtain a crystal with homogeneous composition by maintaining a constant melt composition near the solid-liquid interface, through suppression of the convection flow of the melt by applying a magnetic field. However, the attempt was not completely successful. Convective flow does not occur in microgravity because the gravity in space is from four to six orders of magnitude less than that on Earth. In such a case, mass transfer in the melt is dominated by the diffusion phenomenon. So, if crystal growth is carried out at a rate that is higher than the rate of mass transfer due to this phenomenon, it is expected that crystals having a homogeneous composition will be obtained. In addition, it is also possible that microscopic composition fluctuations (striation) may disappear because microscopic fluctuations diminish in the absence of convection. We are going to grow a bulk-indium gallium arsenide (InGaAs) crystal using the gradient heating furnace (GHF) in the first material processing test (FMPT). The structure of the sample is shown where InGaAs polycrystals in a crucible are doubly sealed in two quartz tubes for safety. The GHF consists of two zones, namely, high temperature and low temperature zones, which results in a large temperature gradient at the interface. Crystal growth is performed by moving the furnace (i.e. the temperature profile) from the left to right at a definite rate. Thus, we will grow crystals both on Earth and in space under the same conditions. As previously described, it is possible to obtain good quality crystals which are homogeneous in composition both macroscopically and microscopically due to the lack of convection in space. We are planning to study the effects of convection on crystal growth from a melt by comparing and characterizing the properties of crystals grown on Earth with those grown in space.

Tatsumi, Masami↗
NASA NTRS2000

Analysis of Siderite Thermal Decomposition by Differential Scanning Calorimetry

Characterization of carbonate devolitilization has important implications for atmospheric interactions and climatic effects related to large meteorite impacts in platform sediments. On a smaller scale, meteorites contain carbonates which have witnessed shock metamorphic events and may record pressure/temperature histories of impact(s). ALH84001 meteorite contains zoned Ca-Mg-Fe-carbonates which formed on Mars. Magnetite crystals are found in the rims and cores of these carbonates and some are associated with void spaces leading to the suggestion by Brearley et al. that the crystals were produced by thermal decomposition of the carbonate at high temperature, possibly by incipient shock melting or devolitilization. Golden et al. recently synthesized spherical Mg-Fe-Ca-carbonates from solution under mild hydrothermal conditions that have similar carbonate compositional zoning to those of ALH84001. They have shown experimental evidence that the carbonate-sulfide-magnetite assemblage in ALH84001 can result from a multistep inorganic process involving heating possibly due to shock events. Experimental shock studies on calcium carbonate prove its stability to approx. 60 GPa, well in excess of the approx. 45 GPa peak pressures indicated by other shock features in ALH84001. In addition, Raman spectroscopy of carbonate globules in ALH84001 indicates no presence of CaO and MgO. Such oxide phases should be found associated with the magnetites in voids if these magnetites are high temperature shock products, the voids resulting from devolitilization of CO2 from calcium or magnesium carbonate. However, if the starting material was siderite (FeCO3), thermal breakdown of the ALH84001 carbonate at 470 C would produce iron oxide + CO2. As no documentation of shock effects in siderite exists, we have begun shock experiments to determine whether or not magnetite is produced by the decomposition of siderite within the < 45GPa pressure window and by the resultant thermal pulse to approx. 600 C experienced by ALH84001. Here, we report thermal and compositional characterization of unshocked siderite and its transition to magnetite. Additional information is contained in the original extended abstract.

Bell, M. S.↗
DOE OSTI2020

Mineralogical transformations in polymetallic nodules and the change of Ni, Cu and Co crystal-chemistry upon burial in sediments

Polymetallic nodules from the Clarion and Clipperton Zone of the equatorial Pacific Ocean were studied using X-ray diffraction, X-ray absorption, Fourier-transformed infrared spectroscopy and transmission electron microscopy. Here, this study includes nodules found at the sediment surface as well as subsurface (14–16 cm sediment depth) and deeply buried (530–985 cm sediment depth) nodules. The surface and subsurface nodules are currently under oxic conditions whereas the deeply buried nodules are under suboxic conditions. Surface nodules consist mainly of turbostratic phyllomanganates (7 Å and 10 Å vernadite and Fe-vernadite); todorokite is a minor phase, if present at all. In contrast, subsurface and especially deeply buried nodules predominantly consist of todorokite, which increases in abundance with depth in the sediment. Thus, upon burial of nodules within the shallow sediment, phyllomanganates transform to todorokite, probably through the combined action of time and change in the ambient chemical conditions. Nodules from deeper sediment depth (>500 cm) consist primarily of todorokite and additionally show signs of dissolution. The transformation of phyllomanganates to todorokite and their further dissolution upon nodule burial under suboxic conditions induces modifications in the crystal-chemistry of Ni, Co, and Cu. In surface nodules, Ni and Co are incorporated in the octahedral sheets of phyllomanganates, whereas Cu mainly is located at the edges of those phyllomanganate sheets. In buried nodules Cu and to a lesser extent Ni are incorporated in todorokite by forming outer-sphere complexes within the tunnels. However, Ni is predominantly incorporated within the octahedra of the newly formed todorokite structure. Co is also enriched in the octahedra of todorokite as a result of dissolution of hydrogenetic vernadite and re-incorporation in the more stable Mn-phase formed during the diagenetic transformation. Co enrichment under suboxic conditions after burial within the sediments is noteworthy since Co in surface nodules is characteristic for oxic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1976

Development of doped-germanium photoconductors for astronomical observations at wavelengths from 30 to 120 micrometers

Technology was developed for production of doped-germanium detectors which have optimized performance in the 30- to 120-micrometer wavelength range and are capable of achieving the objectives of the Infrared Astronomy Satellite space mission. The work of this phase was divided into the following major tasks: (1) growth of Ge:Ga crystals from high-purity starting material with Ga concentrations different from that previously produced, and development of a zone leveling method to produce a uniform Ga doping concentration; (2) growth of uncompensated Ge:Be crystals from high-purity starting material with a range of Be concentrations between 10 to the 14th power and 10 to the 16th power atoms/cubic cm; (3) evaluation of crystals by means of Hall effect and resistance measurements as a function of temperature; (4) fabrication and test of detectors made from both Ge:Be and Ge:Ga crystals to determine the relative performance between different crystals. Correlation of detector test data with material evaluation data and analysis of how to further optimize detector performance.

Bratt, P. R.↗
NASA NTRS1972

ERTS-1 imagery of eastern Africa: A first look at the geological structure of selected areas

The author has identified the following significant results. Imagery of the African rift system resolves the major Cainozoic faults, zones of warping, and associated volcanism. It also clearly depicts the crystal grain of the Precambrian rocks where these are exposed. New structural features, or new properties of known features such as greater extent, continuity, and linearity are revealed by ERTS-1 imagery. This applies, for example, to the NE-SW fracture zones in Yemen, the Aswa mylonite zone at the northern end of the Western Rift, the Nandi fault of western Kenya, the linear faults of the Elgeyo escarpment in the Gregory Rift, and the hemibasins of warped Tertiary lavas on the Red Sea margin of Yemen, matching those of Ethiopian plateau-Afar margin. A tentative scheme is proposed, relating the effect on the pattern of Cainozoic faulting of the degree of obliquity to Precambrian structural trend. It is particularly noteworthy that, even where the Precambrian grain determines the rift faulting to be markedly oblique to the overall trend of the rift trough, for example, in central Lake Tanganyika, the width of the trough is not significantly increased. Some ground mapped lithological boundaries are obscure on ERTS-1 imagery.

Mohr, P. A.↗
NASA NTRS1974

Metal-olivine associations and Ni-Co contents in two Apollo 12 mare basalts

Olivine crystals in mare basalts 12004,8 and 12022,12 are normally zoned with Cr-poor rims. The Ni content of rare 2- to 10-micron metal inclusions in olivine decreases markedly as Fe/Mg in their immediate olivine hosts increases. Each metal grain appears to have been enclosed by late olivine almost immediately after it crystallized. The fractionation trend for the olivine and metal contrasts with the subsolidus equilibration trend for pallasites. For the basalts, not even local equilibrium of Fe, Ni and Co at metal/olivine interfaces can be detected by microprobe. Ni and Co concentrations range from about 300 ppm in olivine cores to about 70 ppm in rims. The limits of detection, at 95% confidence, are 36 ppm (Ni) and 25 ppm (Co). The distribution of Ni and Co in olivine, like that of Mg and Cr, records the depletion of these elements in the melt.

Hewins, R. H.↗
NASA NTRS1990

Experimental approaches for improving SiGe thermoelectric efficiency at JPL

Efforts to improve the thermoelectric efficiency of silicon-germanium alloys are discussed. These efforts are essentially focused on substantially enhancing carrier concentration levels and thus increasing the power factor values of n-type materials. With the help of thermodynamic phase diagram calculations, a combination of various crystal growth and dopant saturation techniques is used for this purpose. Bulk polycrystal growth of double-doped materials is achieved by zone leveling while a new method (the traveling heater method) for high-quality single-crystal growth of SiGe is being developed. Thin films of homogeneous single-crystalline multidoped Si80Ge20 have also been successfully grown from low-temperature melts to investigate combined dopant solid solubility variations. Very high carrier concentration levels were obtained by (P+As)-combined diffusion in zone-leveled and hot-pressed materials. The good overall understanding of doping mechanisms which has been achieved should enable optimization of the thermoelectric properties over this extended carrier concentration range. Reductions in thermal conductivity are being sought by introduction of very small phonon scattering centers (inert material) in the initial powders-precursors of Si-Ge alloys. This approach should benefit both n- and p-type materials.

Borshchevsky, Alex↗
NASA NTRS1991

Fassaite composition trends during crystallization of Allende Type B refractory inclusion melts

Major-, minor-, and trace-element zoning trends in fassaite from Type B1 and B2 inclusions from the Allende meteorite are defined by using electron and ion microprobe data. Fassaite/liquid distribution coefficients are calculated for many of the lithophile elements, and evidence for and against the presence of relict fassaite in these inclusions is discussed. Major-element zoning in fassaite in Type B CAIs is found from Ti-, V-, Sc-rich cores to relatively Mg-, Si-rich rims. Trace elements that are incompatible in this fassaite are Nb (effective fassaite/liquid distribution = 0.29), Y(0.52), Ta(0.34), Th(0.053), U(0.4), and rare earth elements (0.31-0.48), while compatible trace elements are Zr(1.1) and Hf(1.5). Rare-earth-elements (RRE) abundances in fassaite are found to be controlled by crystal/liquid fractionation. Candidates for relict fassaite grains are discovered: Ti-, Sc-rich, REE-poor crystals enclosed in melilite in the mantle of TS34.

Simon, Steven B.↗
NASA NTRS1987

Alpha-decay-induced fracturing in zircon - The transition from the crystalline to the metamict state

Zonation due to alpha-decay damage in a natural single crystal of zircon from Sri Lanka is discussed. The zones vary in thickness on a scale from one to hundreds of microns. The uranium and thorium concentrations vary from zone to zone such that the alpha decay dose is between 0.2 x 10 to the 16th and 0.8 x 10 to the 16th alpha-events per milligram. The transition from the crystalline to the aperiodic metamict state occurs over this dose range. At doses greater than 0.8 x 10 to the 16th alpha events/mg there is no evidence for long-range order. This type of damage will accumulate in actinide-bearing, ceramic nuclear waste forms. The systematic pattern of fractures would occur in crystalline phases that are zoned with respect to actinide radionuclides.

Chakoumakos, Bryan C.↗