Search NASA⌕ Search

SEARCH · Search NASA

Results for “defect chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Nuclear Fuel and Pu Redox Studies from The Glenn T. Seaborg Institute at Idaho National Laboratory

The Glenn T. Seaborg Institute at Idaho National Laboratory (INL-GTSI) focuses on advancing fundamental research in the actinide sciences by providing unique opportunities to early career scientists and engineers to gain experience studying the actinide elements and their associated systems. The INL-GTSI is built from three focus areas that are based on the expertise and supporting infrastructure at INL and include solid state chemistry and physics, solution phase chemistry and physics, and forensic and isotope science. INL is the lead Laboratory for nuclear energy research and development in the U. S. and the research on nuclear fuels performed under the INL-GTSI gives good examples of solid state studies. Uranium-Molybdenum (U-Mo) alloys are leading fuel candidates for conversion of high performance research and test reactors to low-enriched fuels. During irradiation, generated fission gas accumulates into bubbles and self-organizes into a gas bubble superlattice (GBS) that effectively stores fission gases and inhibits fuel swelling. A study on the early self- organizing behavior of the GBS shows that not only grain boundaries but the interfaces between the U-Mo matrix and uranium carbide (UC) impurities are important to GBS formation.[1] In solution, understanding the complex redox behavior of plutonium in aqueous environments is critical for establishing optimized nuclear waste reprocessing solvent systems and storage tank environments. INL-GTSI researchers have produced an experimentally validated multi-scale model of the gamma radiation induced behavior of plutonium ions in concentrated aqueous HNO3 solutions.[2] Here, gamma radiation effected only minimal steady state changes in the redox distribution of the plutonium oxidation states. The redox cycling between Pu(IV) and Pu(III) is demonstrated to be mediated by the •OH/NO3• radical oxidation of Pu(III) and the H2O2/HNO3 driven reduction of Pu(IV). The INL-GTSI offers young researchers the unique chance to work directly with actinide bearing materials in a U. S. National Laboratory environment. Further topical areas of interest to the INL-GTSI include, but are not limited to, fundamental actinide properties, structure/property (electronic, magnetic, thermal) relations, actinide quantum criticality, f- electron interactions, electron correlations, computational studies, new phases, defect effects, interface interactions, isotope production and separation, forensic analytical chemistry, structure and dynamic properties of actinides in non-aqueous media, separations chemistry and kinetics for advanced nuclear fuel cycles, radiation effects, and innovative and advanced ligand design for complexation of the actinides.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2019

Conservation of Atypical Allostery in C. elegans UDP-Glucose Dehydrogenase

Human UDP-glucose dehydrogenase (hUGDH) oxidizes uridine diphosphate (UDP)-glucose to UDP-glucuronic acid, an essential substrate in the phase II metabolism of drugs. The activity of hUGDH is controlled by an atypical allosteric mechanism in which the feedback inhibitor UDP-xylose competes with the substrate for the active site and triggers a buried allosteric switch to produce an inactive complex (E Ω ). Previous comparisons with a nonallosteric UGDH identified six large-to-small substitutions that produce packing defects in the protein core and provide the conformational flexibility necessary for the allosteric transition. Here, we test the hypothesis that these large-to-small substitutions form a motif that can be used to identify allosteric UGDHs. Caenorhabditis elegans UGDH (cUGDH) conserves this motif with the exception of an Ala-to-Pro substitution in position 109. The crystal structures of unliganded and UDP-xylose bound cUGDH show that the A109P substitution is accommodated by an Asn-to-Ser substitution at position 290. Steady-state analysis and sedimentation velocity studies show that the allosteric transition is conserved in cUGDH. The enzyme also exhibits hysteresis in progress curves and negative cooperativity with respect to NAD+ binding. Both of these phenomena are conserved in the human enzyme, which is strong evidence that these represent fundamental features of atypical allostery in UGDH. A phylogenetic analysis of UGDH shows that the atypical allostery motif is ancient and identifies a potential transition point in the evolution of the UGDH family.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Influence of Surface Defects on WO 3 Photoelectrodes for Catalyzing Chloride Oxidation in Water

Tungsten oxide (WO 3 ) is an n-type semiconductor due to oxygen vacancies (□ O •• in Kroger-Vink notation) or surface protonation as H x WO 3 . It is one of the few acid-stable oxides under large positive bias, which makes WO 3 ideal for interrogating the mechanism of the chloride oxidation reaction (COR). The large, positive valence band edge of ∼3 eV provides the overpotential necessary to carry out the COR, but the reaction competes with the oxygen-evolution reaction in water. The □ O •• defect density can be controlled by the atmosphere under which the material is annealed, so WO 3 films were prepared by a spin-coating method from an ammonium metatungstate precursor annealed at 500 °C under air, flowing O 2 , and flowing argon. Annealing the films in a flowing O 2 atmosphere hinders the formation of □ O ••, and annealing in Ar leads to greater surface W 6+ , likely due to expelling intercalated H + . The saturated photocurrent density (j ph ) is highest in films with the greatest concentration of W 5+ and greatest concentration of oxide defects: (0.66 mA/cm 2 annealed in air, 0.58 mA/cm 2 annealed in Ar, and 0.49 mA/cm 2 annealed in O 2 , reported at 1.5 V vs Ag/AgCl, pH 3 (before the onset of a dark reaction). The defect concentrations are determined by X-ray photoelectron spectroscopy. In all cases the Faradaic efficiency for the COR is near unity. Finally, we demonstrate that W 5d states can be probed by ligand K-edge X-ray absorption near-edge spectroscopy via pre-edge (Cl 1s → W 5d) transitions, lower in energy than the ligand-centered (Cl 1s → 4p) transition. We use this analysis to show the presence of W─Cl covalent bonds on the WO 3 films post-COR, corroborated by DFT calculations. Furthermore, this result stands in contrast to the commonly assumed mechanistic proposal invoking outer-sphere electron transfer to a physisorbed chloride ion.

Cl K-edge↗
DOE OSTI2023

Ferroelectric Large Polarons and Defect Tolerance in Multi-Component Lead Halide Perovskites

Solvation plays a pivotal role in chemistry and biology. A solid-state analogy of solvation is polaron formation, but the magnitude of Coulomb screening is typically an order-of-magnitude weaker than that of solvation in aqueous solutions. Here the PI aims to explore a new class of polarons, the ferroelectric large polaron, which allows efficient Coulomb screening of an electron or hole by extended ordering of dipoles from symmetry-broken unit cells. This kind of local ordering is reflected in the ferroelectric-like THz dielectric responses of lead halide perovskites (LHPs) and may be partially responsible for their exceptional optoelectronic performances. A charge carrier may be localized to and/or induce the formation of nanoscale domain boundaries of locally ordered dipoles in a ferroelectric or paraelectric material, i.e., crystal structure with polar unit cells or polar fluctuations. The ability to form ferroelectric large polarons can result in the efficient screening of charge carriers from scattering with other charge carriers, with charged defects, and with longitudinal optical phonons, thus contributing to enhanced optoelectronic properties. During the past funding period, the PI has explored efficient charge carrier screening in three-dimensional (3D) LHP crystals and has developed the ferroelectric large polaron model to explain a range of carrier properties in these materials. The PI has also developed a new experimental tool, two-dimensional optical Kerr effect (2D-OKE), which is particularly powerful in probing photophysical properties with exquisite energy resolution at or near the bandgap. During the next funding periods, the PI aims to establish the applicability of the ferroelectric large polaron proposal as a general principle for the design/search of defect tolerant semiconductors in optoelectronics. Preliminary experiments on model semiconductor systems beyond LHPs have demonstrated the feasibility of the proposed research.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cooling-Rate-Driven Polymorphism and Vacancy Ordering in Ce 2 MnGe 6 Intergrowth Phases

Intergrowth phases in intermetallic systems provide a compelling framework for investigating structure–property relationships as a function of crystallographic subunit stacking. In this study, we examine the influence of Mn vacancy ordering on subunit stacking and reassign the structure of Ce 2 MnGe 6 to a monoclinic C2/m space group (a = 8.3486(17) Å, b = 8.6181(18) Å, c = 10.778(2) Å, β = 101.17(2)°). Additionally, we report a monoclinic polymorph of the Ln 2 MGe 6 family characterized as a tripled c-axis supercell derivative of monoclinic Ce 2 MnGe 6 , 3×c-Ce 2 MnGe 6 (a = 8.3482(16) Å, b = 8.6179(18) Å, c = 31.813(6) Å, β = 93.763(7)°). This polymorph emerges under rapid cooling conditions during the synthesis and offers insight into the structural relationship between the orthorhombic and monoclinic variants of the Ln 2 MGe 6 phases. Notably, the supercell form of Ce 2 MnGe 6 (3×c-Ce 2 MnGe 6 ) exhibits increased electrical resistivity and suggests enhanced Zintl-like behavior, potentially indicating greater thermodynamic stability relative to the parent monoclinic phase.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Highly active, ultra-low loading single-atom iron catalysts for catalytic transfer hydrogenation

Highly effective and selective noble metal-free catalysts attract significant attention. Here, a single-atom iron catalyst is fabricated by saturated adsorption of trace iron onto zeolitic imidazolate framework-8 (ZIF-8) followed by pyrolysis. Its performance toward catalytic transfer hydrogenation of furfural is comparable to state-of-the-art catalysts and up to four orders higher than other Fe catalysts. Isotopic labeling experiments demonstrate an intermolecular hydride transfer mechanism. First principles simulations, spectroscopic calculations and experiments, and kinetic correlations reveal that the synthesis creates pyrrolic Fe(II)-plN 3 as the active center whose flexibility manifested by being pulled out of the plane, enabled by defects, is crucial for collocating the reagents and allowing the chemistry to proceed. The catalyst catalyzes chemoselectively several substrates and possesses a unique trait whereby the chemistry is hindered for more acidic substrates than the hydrogen donors. This work paves the way toward noble-metal free single-atom catalysts for important chemical reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Phase equilibrium of liquid water and hexagonal ice from enhanced sampling molecular dynamics simulations

We study the phase equilibrium between liquid water and ice Ih modeled by the TIP4P/Ice interatomic potential using enhanced sampling molecular dynamics simulations. Our approach is based on the calculation of ice Ih-liquid free energy differences from simulations that visit reversibly both phases. The reversible interconversion is achieved by introducing a static bias potential as a function of an order parameter. The order parameter was tailored to crystallize the hexagonal diamond structure of oxygen in ice Ih. Furthermore, we analyze the effect of the system size on the ice Ih-liquid free energy differences, and we obtain a melting temperature of 270 K in the thermodynamic limit. This result is in agreement with estimates from thermodynamic integration (272 K) and coexistence simulations (270 K). Since the order parameter does not include information about the coordinates of the protons, the spontaneously formed solid configurations contain proton disorder as expected for ice Ih.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Enhanced positive and negative exchange bias in FeF 2 /Ni with dusted interfaces

An enhanced exchange bias was found in FeF 2 /Ni interfaces by inserting dusting of Pd and Cu atoms. We have used an ultrathin wedge to investigate systematically the effect of a discontinuous nonmagnetic spacer between the antiferromagnetic and ferromagnetic layers. Negative and positive exchange biases are symmetric and maximized for less than two angstroms of the nonmagnetic layer. Moreover, the dusting reduces the field cooling threshold to switch between the negative and the positive exchange bias. This finding demonstrates that nonmagnetic dusted layers can improve the interfacial exchange energy density in antiferromagnetic/ferromagnetic heterostructures and modify the bulk antiferromagnetic domain structure. Other dusting materials such as Ag, Ti, V, and SiO 2 showed no enhancement in FeF 2 /Ni bilayers, which indicates the atomic sensitivity of this effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Cleavable magnetic materials from van der Waals layered transition metal halides and chalcogenides

The study of exfoliated 2D magnetic materials is a vibrant and rapidly progressing field and is impacting many areas of condensed matter research including fundamental magnetism, spintronics and optoelectronics, and topological spin and electronic systems. The availability of promising candidate materials has enabled much of the progress in this field. Here, I present my perspective on the development of cleavable magnetic materials with a focus on transition metal halides and chalcogenides and an emphasis on crystal structure and magnetic order. To give proper context for these discussions, brief and incomplete surveys of recent work are included, focusing on specific aspects that I find most useful for guiding work on emerging materials and motivating expansion into other compounds and material families. Several instances of structural changes that can differentiate behaviors of bulk and ultrathin specimens are noted. Probing and understanding potential structural differences present a challenge but also an opportunity for material and device development, if they can be predicted and controlled. It is clear that careful investigations of structure, layer stacking, and defects in materials, how they may relate to the crystal chemistry, and how they may be different in crystals and mono- or few-layer specimens provide invaluable context for understanding the behavior of van der Waals layered magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Chemical order transitions within extended interfacial segregation zones in NbMoTaW

Interfacial segregation and chemical short-range ordering influence the behavior of grain boundaries in complex concentrated alloys. In this study, we use atomistic modeling of a NbMoTaW refractory complex concentrated alloy to provide insight into the interplay between these two phenomena. Hybrid Monte Carlo and molecular dynamics simulations are performed on columnar grain models to identify equilibrium grain boundary structures. Here our results reveal extended near-boundary segregation zones that are much larger than traditional segregation regions, which also exhibit chemical patterning that bridges the interfacial and grain interior regions. Furthermore, structural transitions pertaining to an A2-to-B2 transformation are observed within these extended segregation zones. Both grain size and temperature are found to significantly alter the widths of these regions. An analysis of chemical short-range order indicates that not all pairwise elemental interactions are affected by the presence of a grain boundary equally, as only a subset of elemental clustering types are more likely to reside near certain boundaries. The results emphasize the increased chemical complexity that is associated with near-boundary segregation zones and demonstrate the unique nature of interfacial segregation in complex concentrated alloys.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Photoinduced patterning of oxygen vacancies to promote the ferroelectric phase of Hf 0.5 Zr 0.5 O 2

Photoinduced reductions in the oxygen vacancy concentration were leveraged to increase the ferroelectric phase fraction of Hf 0.5 Zr 0.5 O 2 thinfilms. Modest ( ~ 2 — 77 pJ=cm 2 ) laser doses of visible light (488 nm, 2.54 eV) spatially patterned the concentration of oxygen vacancies as monitored by photoluminescence imaging. Local, tip-based, near-field, nanoFTIR measurements showed that the photoinduced oxygen vacancy concentration reduction promoted formation of the ferroelectric phase (space group Pca2 1 ), resulting in an increase in the piezoelectric response measured by piezoresponse force microscopy. Photoinduced vacancy tailoring provides, therefore, a spatially prescriptive, postsynthesis, and low-entry method to modify phase in HfO 2 -based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enhanced defect annihilation capability of the graphene/copper interface: An in situ study

It is well known that energetic heavy ion irradiations can often induce defects and ultimately lead to material degradations. Interfaces, such as high-angle grain boundaries (HAGBs), are generally used as defect sinks for alleviating the irradiation damage. However, HAGBs are often unstable during radiation. Here we investigate the interfacial irradiation responses of the graphene (Gr)/Cu composites by using in situ Kr ++ ions irradiation under transmission electron microscopy. The results revealed that the Gr/Cu interface exhibits higher defect annihilation capability compared to the HAGBs in Cu. Moreover, the atomistic simulations suggested a slightly higher and larger range of stress field for the Gr/Cu interface, which contributes to the enhanced defects absorption capability. The present findings are essential to understand and design a new class of carbon/metal composites with superior irradiation tolerance.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Learning with Delayed Rewards—A Case Study on Inverse Defect Design in 2D Materials

Defect dynamics in materials are of central importance to a broad range of technologies from catalysis to energy storage systems to microelectronics. Material functionality depends strongly on the nature and organization of defects-their arrangements often involve intermediate or transient states that present a high barrier for transformation. The lack of knowledge of these intermediate states and the presence of this energy barrier presents a serious challenge for inverse defect design, especially for gradient-based approaches. Here, we present a reinforcement learning (RL) [Monte Carlo Tree Search (MCTS)] based on delayed rewards that allow for efficient search of the defect configurational space and allows us to identify optimal defect arrangements in low-dimensional materials. Using a representative case of two-dimensional MoS 2 , we demonstrate that the use of delayed rewards allows us to efficiently sample the defect configurational space and overcome the energy barrier for a wide range of defect concentrations (from 1.5 to 8% S vacancies)-the system evolves from an initial randomly distributed S vacancies to one with extended S line defects consistent with previous experimental studies. Detailed analysis in the feature space allows us to identify the optimal pathways for this defect transformation and arrangement. Comparison with other global optimization schemes like genetic algorithms suggests that the MCTS with delayed rewards takes fewer evaluations and arrives at a better quality of the solution. The implications of the various sampled defect configurations on the 2H to 1T phase transitions in MoS 2 are discussed. In this study, we introduce a RL strategy employing delayed rewards that can accelerate the inverse design of defects in materials for achieving targeted functionality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Point Defects in Two-Dimensional Ruddlesden–Popper Perovskites Explored with Ab Initio Calculations

Two-dimensional Ruddlesden–Popper (RP) halide perovskites stand out as excellent layered materials with favorable optoelectronic properties for efficient light-emitting, spintronic, and other spin-related applications. However, properties often determined by defects are not well understood in these perovskite systems. This work investigates the ground state electronic structure of commonly formed defects in a typical RP perovskite structure by density functional theory. Our study reveals that these 2D perovskites generally retain their defect tolerance with limited perturbation of the electronic structure in the case of neutral-type point defects. In contrast, donor/acceptor defects induce deep midgap states, potentially causing harm to the material’s electronic performance. To retain positive intrinsic properties, the halide vacancies and interstitial defects should be avoided. The observed strong electron localization results in trap states and consequently leads to reduced device performance. Finally, this understanding can guide experimental efforts that aim for improved 2D halide perovskite-based device performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Effects of local compositional and structural disorder on vacancy formation in entropy-stabilized oxides from first-principles

Entropic stabilization has evolved into a strategy to create new oxide materials and realize novel functional properties engineered through the alloy composition. Achieving an atomistic understanding of these properties to enable their design, however, has been challenging due to the local compositional and structural disorder that underlies their fundamental structure-property relationships. Here, we combine high-throughput atomistic calculations and linear regression algorithms to investigate the role of local configurational and structural disorder on the thermodynamics of vacancy formation in (MgCoNiCuZn)O-based entropy-stabilized oxides (ESOs) and their influence on the electrical properties. We find that the cation-vacancy formation energies decrease with increasing local tensile strain caused by the deviation of the bond lengths in ESOs from the equilibrium bond length in the binary oxides. The oxygen-vacancy formation strongly depends on structural distortions associated with the local configuration of chemical species. Vacancies in ESOs exhibit deep thermodynamic transition levels that inhibit electrical conduction. By applying the charge-neutrality condition, we determine that the equilibrium concentrations of both oxygen and cation vacancies increase with increasing Cu mole fraction. Our results demonstrate that tuning the local chemistry and associated structural distortions by varying alloy composition acts an engineering principle that enables controlled defect formation in multi-component alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Analysis of differential scanning calorimetry data for aged plutonium

Differential scanning calorimetry data for samples of a 52 year old plutonium alloy with 3.3 at. % Ga that were heated beyond the melting point is analyzed using transition state theory to find activation energies for the δ to ε and ε to liquid phase transitions. A Bayesian statistical method involving a Gaussian process model is used to find mean values and confidence intervals for the activation energies. The activation energy for the δ to ε phase transition increases by 3.3 ± 3.8% per decade, relative to the case when all age related plutonium lattice point defects have been removed through annealing. The corresponding increase in activation energy for the ε to liquid transition is shown to be 7.1 ± 1.8% per decade. It is postulated that the change in activation energy with age for both phase transitions is caused, in part, by the accumulation of the same type of lattice point defects associated with the observed increase in elastic bulk modulus over time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗