Search NASA⌕ Search

SEARCH · Search NASA

Results for “density functional calculation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Electronic Structure and Linhard Function of Iron-Based Superconductor La{sub 0.5−x}Na{sub 0.5 + x}Fe{sub 2}As{sub 2}

We perform theoretical studies of the iron-based superconductor La{sub 0.5−x}Na{sub 0.5 + x}Fe{sub 2}As{sub 2}. Using density functional calculation with virtual crystal approximation, band structures, density of states, and Fermi surfaces are obtained for different La/Na composition by varying x value. Furthermore, the nesting property is also investigated using the Linhard function. Our main findings are as follows: For undoped (x = 0.0) case, the magnetic and electronic structure share great similarities with extensively studied BaFe{sub 2}As{sub 2}. Upon hole doping (x = 0.3), the Q = (π,π) nesting property are preserved. However, upon electron doping (x = -0.3), the Fermi surfaces undergo a dramastic change into 3D and complex structure. We find this change is attributed to the comprehensive influence of band filling and chemical pressure of La{sup 3+}. We propose the asymmetric change of Fermi surfaces upon doping may in some sense explain the electron-hole asymmetry in phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic and electronic properties of nanocrystalline Gd{sub 3}Fe{sub 5}O{sub 12} garnet

The Gd{sub 3}Fe{sub 5}O{sub 12} nanocrystalline Gadolinium Iron Garnet (GdIG) obtained from a sintered block was milled in a high energy ball mill. We measured the magnetization at 5 K under applied fields up to 12 T. We report here our study of approach to saturation magnetization. The results have been interpreted within the framework of random anisotropy model. From an analysis of the approach to saturation magnetization some fundamental parameters have been extracted. We have determined the anisotropy field H{sub r} and the local magnetic anisotropy constant K{sub L}. In addition, first-principles spin-density functional calculations, using the Full potential Linear Augmented Plane Waves (FLAPW) method are performed to investigate electronic and magnetic structures. All computed parameters are discussed and compared to available experimental data. - Graphical abstract: Random anisotropy fields, random anisotropy constant, substantial interstitial magnetism as well as magnetic quadrupolar feature on oxygen are determined from magnetization, theoretical random magnetic anisotropy model and FLAPW calculations in nanocrystalline Gadolinium Iron Garnet (GdIG). Highlights: Black-Right-Pointing-Pointer Nanocrystalline Gadolinium Iron Garnet (GdIG) prepared by a high energy ball mill. Black-Right-Pointing-Pointer Random magnetic anisotropy model developed for amorphous is used for Nanocrystalline GdIG. Black-Right-Pointing-Pointer Random anisotropy fields and random anisotropy constant are determined. Black-Right-Pointing-Pointer FLAPW calculations performed to investigate both magnetic and electronic structures. Black-Right-Pointing-Pointer Substantial interstitial magnetism and magnetic quadrupolar feature on oxygen are revealed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density functional theory and evolution algorithm calculations of elastic properties of AlON

Different models for aluminum oxynitride (AlON) were calculated using density functional theory and optimized using an evolutionary algorithm. Evolutionary algorithm and density functional theory (DFT) calculations starting from several models of AlON with different Al or O vacancy locations and different positions for the N atoms relative to the vacancy were carried out. The results show that the constant anion model [McCauley et al., J. Eur. Ceram. Soc. 29(2), 223 (2009)] with a random distribution of N atoms not adjacent to the Al vacancy has the lowest energy configuration. The lowest energy structure is in a reasonable agreement with experimental X-ray diffraction spectra. The optimized structure of a 55 atom unit cell was used to construct 220 and 440 atom models for simulation cells using DFT with a Gaussian basis set. Cubic elastic constant predictions were found to approach the experimentally determined AlON single crystal elastic constants as the model size increased from 55 to 440 atoms. The pressure dependence of the elastic constants found from simulated stress-strain relations were in overall agreement with experimental measurements of polycrystalline and single crystal AlON. Calculated IR intensity and Raman spectra are compared with available experimental data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic properties and magnetocrystalline anisotropy of Nd 2 Fe 17 , Nd 2 Fe 17 X 3 , and related compounds

The electronic and magnetic properties of Nd 2 Fe 17 and Nd 2 Fe 17 X 3 (X = C or N) compounds have been calculated using the first-principles density functional calculations. Among these, the nitrogen and carbon interstitial compounds exhibit all of the required properties such as a saturation moment of 1.6 T, Curie temperature of 700–750 K, however easy magnetic axis lies in the planar direction making them less attractive for permanent magnet applications. The calculated magnetocrystalline anisotropy energy is found to be -2.7 MJ/m 3 for Nd 2 Fe 17 C 3 and -4.7 MJ/m 3 for Nd 2 Fe 17 N 3 . Finally, we further explored the possibility of changing the easy axis direction through La/Ce alloying at Nd site. Although the MAE is found to be smaller in magnitude for all the La/Ce alloys it still maintains planar direction.

36 MATERIALS SCIENCE↗

Controlling Non-Covalent Interactions to Modulate the Dispersion of Fullerenes in Polymer Nanocomposites

Polymer nanocomposites (PNCs) are materials based on a class of filled plastics that contain relatively small amounts of nanoparticles, which can impart improved structural, mechanical, and thermal properties relative to the neat polymer. However, the homogeneous dispersion of the nanoparticles into a polymer matrix is critical and an impeding factor for the controlled enhancement of PNC properties. In this work, we provide new insight into the importance of polymer chain connectivity and nanoparticle shape and curvature on the formation of noncovalent electron donoracceptor (EDA) interactions between polymers and nanoparticles. This is accomplished by experimentally monitoring the dispersion of nanoparticles in copolymers containing varying amounts of functional moieties that can form noncovalent interactions with carbon nanoparticles with corroboration through density functional calculations. The results show that the presence of a minority of interacting functional groups within a polymer chain leads to an optimum interaction between the polymer and fullerene. Density functional theory calculations that identify the binding energy and geometry of the interaction between the functional monomers and fullerenes correspond very well with the experimental results. Moreover, comparison of these results to similar studies with single-walled carbon nanotubes (SWNT) indicate a distinct difference in the ability of EDA interactions to improve the dispersion of fullerenes relative to their impact on SWNT. Thus, the polymer chain connectivity, the polymer chain conformation, and size and shape of the nanoparticle modulate the formation of intermolecular interactions and directly impact the dispersion of the resultant nanocomposite.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Controlling Non-Covalent Interactions to Modulate the Dispersion of Fullerenes in Polymer Nanocomposites

Polymer nanocomposites (PNCs) are materials based on a class of filled plastics that contain relatively small amounts of nanoparticles, which can impart improved structural, mechanical, and thermal properties relative to the neat polymer. However, the homogeneous dispersion of the nanoparticles into a polymer matrix is critical and an impeding factor for the controlled enhancement of PNC properties. In this work, we provide new insight into the importance of polymer chain connectivity and nanoparticle shape and curvature on the formation of noncovalent electron donor-acceptor (EDA) interactions between polymers and nanoparticles. This is accomplished by experimentally monitoring the dispersion of nanoparticles in copolymers containing varying amounts of functional moieties that can form noncovalent interactions with carbon nanoparticles with corroboration through density functional calculations. The results show that the presence of a minority of interacting functional groups within a polymer chain leads to an optimum interaction between the polymer and fullerene. Density functional theory calculations that identify the binding energy and geometry of the interaction between the functional monomers and fullerenes correspond very well with the experimental results. Moreover, comparison of these results to similar studies with single-walled carbon nanotubes (SWNT) indicate a distinct difference in the ability of EDA interactions to improve the dispersion of fullerenes relative to their impact on SWNT. Thus, the polymer chain connectivity, the polymer chain conformation, and size and shape of the nanoparticle modulate the formation of intermolecular interactions and directly impact the dispersion of the resultant nanocomposite.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Ultraviolet Absorption Spectrum of Malonaldehyde in Water Is Dominated by Solvent-Stabilized Conformations

Free energy calculations for eight enol isomers of malonaldehyde (MA) and simulation of the ultraviolet (UV) absorption spectrum in both the gas phase and water (pH = 3, where the molecule exists in neutral undeprotonated form) show that in water the two s-trans nonchelated enol conformers of MA become thermodynamically more stable than the internally hydrogen-bonded (“chelated enol”) conformer (CE). The pure CE conformer in water has a slightly red-shifted UV spectrum with respect to that in the gas phase, but the blue-shifted spectrum observed in water at pH 3 is dominated by solvent-stabilized conformations that have negligible populations in the gas phase. Density functional calculations with the solvation model based on density (SMD) and an ensemble-averaged vertical excitation model explain the experimental observations in detail.

Environmental Molecular Sciences Laboratory↗

On the accuracy of density functional theory and wave function methods for calculating vertical ionization energies

The best practice in computational methods for determining vertical ionization energies (VIEs) is assessed, via reference to experimentally determined VIEs that are corroborated by highly accurate coupled-cluster calculations. These reference values are used to benchmark the performance of density functional theory (DFT) and wave function methods: Hartree-Fock theory, second-order Møller-Plesset perturbation theory, and Electron Propagator Theory (EPT). The core test set consists of 147 small molecules. An extended set of six larger molecules, from benzene to hexacene, is also considered to investigate the dependence of the results on molecule size. The closest agreement with experiment is found for ionization energies obtained from total energy difference calculations. In particular, DFT calculations using exchange-correlation functionals with either a large amount of exact exchange or long-range correction perform best. The results from these functionals are also the least sensitive to an increase in molecule size. In general, ionization energies calculated directly from the orbital energies of the neutral species are less accurate and more sensitive to an increase in molecule size. For the single-calculation approach, the EPT calculations are in closest agreement for both sets of molecules. For the orbital energies from DFT functionals, only those with long-range correction give quantitative agreement with dramatic failing for all other functionals considered. The results offer a practical hierarchy of approximations for the calculation of vertical ionization energies. In addition, the experimental and computational reference values can be used as a standardized set of benchmarks, against which other approximate methods can be compared.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Communication: Effect of accidental mode degeneracy on Raman intensity in 2D materials: Hybrid functional study of bilayer phosphorene

Bulk black phosphorus has two optical phonon modes labeled as A{sub g}{sup 2} and B{sub 2u}, respectively, that are nearly degenerate in frequency. However, density functional theory calculations using local or semi-local functionals cannot reproduce this degeneracy. Here, we propose a hybrid functional approach aided by van der Waals (vdW) force fields, which can accurately describe the lattice dynamic and electronic properties of both bulk and few-layer black phosphorus (phosphorene). Using this approach we show that in bilayer phosphorene, the two Raman modes derived from the B{sub 2u} and A{sub g}{sup 2} modes could exhibit strong resonance as a result of the accidental degeneracy so that both modes could be observed in Raman experiment. Without the mode degeneracy, however, the Raman intensity of the B{sub 2u}-derived mode would be too weak to be observed. We further show that the accidental degeneracy is correlated to the applied strain, which enables Raman spectroscopy to be a powerful tool for characterizing built-in strains in 2D materials, e.g., due to the interaction with substrates, which has emerged as an important issue in vdW epitaxy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microscopic Nature of Magnetic Ground State in CeAuSb 2

Here, the synergistic investigation of ground-state magnetic correlation in the single-crystal heavy fermion compound CeAuSb 2 using detailed neutron scattering measurements and density functional calculations is reported. Unlike the previous reports of single antiferromagnetic transition at T N ≈ 6 K, three successive transitions with distinct critical exponents at T N = 5.3, 4.46, and 3.76 K, respectively, are detected in CeAuSb. The low-temperature ground-state magnetic correlation is described by the spin density wave order in the basal plane with propagation wave vector $τ$ = (0.135, 0.135, 0.5) rlu. The spin density wave order arises due to the nesting of hole pockets in the Fermi surface, with parallel surfaces being separated by the experimentally found propagation vector τ. The comprehensive investigation of magnetic ground-state properties is expected to provide new insights in understanding the emerging quantum magnetism in this system, including the debated quantum critical state and magnetic field-induced metamagnetic transitions at low temperature.

36 MATERIALS SCIENCE↗

Iodine Vacancies do not Cause Nonradiative Recombination in Halide Perovskites

The iodine vacancy (V I ) has frequently been discussed as a strong nonradiative recombination center in halide perovskites. This proposition was mainly based on the presence of charge-state transition levels in the band gap, as found in early first-principles calculations. In this work, we perform accurate hybrid-density-functional calculations for V I in CsPbI 3 , CsSnI 3 , and CsGeI 3 and find that V I does not have any transition levels in the band gap in CsPbI 3 , in contrast to the results from calculations based on semilocal functionals. The iodine vacancy V I does introduce levels in the band gap in CsSnI 3 and CsGeI 3 , but our explicitly computed nonradiative capture coefficients demonstrate that V I has a negligible impact on nonradiative recombination. Our study corrects a misunderstanding of the role of V I in the iodide-based perovskites, and shifts the focus toward identifying and mitigating actual recombination centers in order to further improve the optoelectronic performance.

14 SOLAR ENERGY↗

Bond disproportionation, charge self-regulation, and ligand holes in s - p and in d -electron A B X 3 perovskites by density functional theory

Some ABX 3 perovskites exhibit different local environments (DLE) for the same B atoms in the lattice, an effect referred to as disproportionation, distinguishing such compounds from common perovskites that have single local environments (SLE). The basic phenomenology associated with such disproportionation involves the absence of B-atom charge ordering, the creation of different B-X bond length (“bond alternation”) for different local environments, the appearance of metal (in SLE) to insulator (in DLE) transitions, and the formation of ligand holes. We point out that this phenomenology is common to a broad range of chemical bonding patterns in ABX 3 compounds, either with s-p electron B-metal cations (BaBiO 3 , CsTlF 3 ) or with noble-metal cations (CsAuCl 3 ), as well as with d-electron cations (SmNiO 3 , CaFeO 3 ). Here we show that underlying much of this phenomenology is the “self-regulating response,” whereby in strongly bonded metal-ligand systems with high-lying ligand orbitals, the system protects itself from creating highly charged cations by transferring ligand electrons to the metal, thus preserving a nearly constant metal charge in different local environments, while creating B-ligand bond alternation and ligand-like conduction band (“ligand hole” states). We are asking what are the minimal theory ingredients needed to explain the main features of this SLE-to-DLE phenomenology, such as its energetic driving force, bond length changes, possible modifications in charge density, and density of state changes. Using as a guide the lowering of the total energy in DLE relative to SLE, we show that density functional calculations describe this phenomenology across the whole chemical bonding range without resort to special strong correlation effects, beyond what DFT naturally contains. In particular, lower total energy configurations (DLE) naturally develop bond alternation, gapping of the metallic SLE state, and absence of charge ordering with ligand hole formation.

36 MATERIALS SCIENCE↗

Some Problems in Density Functional Theory

Though calculations based on density functional theory (DFT) are used remarkably widely in chemistry, physics, materials science, and biomolecular research and though the modern form of DFT has been studied for almost 60 years, some mathematical problems remain. From a physical science perspective, it is far from clear whether those problems are of major import. For context, we provide an outline of the basic structure of DFT as it is presented and used conventionally in physical sciences, note some unresolved mathematical difficulties with those conventional demonstrations, then pose several questions regarding both the time-independent and time-dependent forms of DFT that could benefit from attention in applied mathematics. Furthermore, progress on any of these would aid in development of better approximate functionals and in interpretation of DFT.

36 MATERIALS SCIENCE↗

Heat transport in silicon from first-principles calculations

Using harmonic and anharmonic force constants extracted from density functional calculations within a supercell, we have developed a relatively simple but general method to compute thermodynamic and thermal properties of any crystal. First, from the harmonic, cubic, and quartic force constants, we construct a force field for molecular dynamics. It is exact in the limit of small atomic displacements and thus does not suffer from inaccuracies inherent in semiempirical potentials such as Stillinger-Weber's. By using the Green-Kubo formula and molecular dynamics simulations, we extract the bulk thermal conductivity. This method is accurate at high temperatures where three-phonon processes need to be included to higher orders, but may suffer from size scaling issues. Next, we use perturbation theory (Fermi golden rule) to extract the phonon lifetimes and compute the thermal conductivity κ from the relaxation-time approximation. This method is valid at most temperatures, but will overestimate κ at very high temperatures, where higher-order processes neglected in our calculations also contribute. As a test, these methods are applied to bulk crystalline silicon, and the results are compared and differences are discussed in more detail. The presented methodology paves the way for a systematic approach to model heat transport in solids using multiscale modeling, in which the relaxation time due to anharmonic three-phonon processes is calculated quantitatively, in addition to the usual harmonic properties such as phonon frequencies and group velocities. As a result it also allows the construction of an accurate bulk interatomic potentials database.

36 MATERIALS SCIENCE↗

First principles calculation of finite temperature magnetism in Fe and Fe3C

Density functional calculations have proven to be a useful tool in the study of ground state properties of many materials. The investigation of finite temperature magnetism, on the other hand, has to rely usually on the usage of empirical models that allow the large number of evaluations of the systems Hamiltonian that are required to obtain the phase space sampling needed to obtain the free energy, specific heat, magnetization, susceptibility, and other quantities as function of temperature. We have demonstrated a solution to this problem that harnesses the computational power of today s large massively parallel computers by combining a classical Wang Landau Monte-Carlo calculation [F. Wang and D. P. Landau, Phys. Rev. Lett. 86, 2050 (2001)] with our first principles multiple scattering electronic structure code [Y. Wang et al., Phys. Rev. Lett. 75, 2867 (1995)] that allows the energy calculation of constrained magnetic states [M. Eisenbach et al., Proceedings of the Conference on High Performance Computing, Networking, Storage and Analysis (ACM, New York, 2009)]. We present our calculations of finite temperature properties of Fe and Fe3C using this approach and we find the Curie temperatures to be 980 and 425K, respectively.

36 MATERIALS SCIENCE↗

Giant Magnetic and Optical Anisotropy in Cerium-Substituted M-Type Strontium Hexaferrite Driven by $4f$ Electrons

By performing density-functional calculations, we find a giant magnetocrystalline anisotropy (MCA) constant in abundant element cerium $\mathrm{Ce}$ substituted M-type hexaferrite, in the energetically favorable strontium site, assisted by a quantum confined electron transfer from $\mathrm{Ce}$ to a specific iron $\mathrm{2a}$ site. Remarkably, the calculated electronic structure shows that the electron transfer leads to the formation of $\mathrm{Ce}^{3+}$ and $\mathrm{Fe}^{2+}$ at the $\mathrm{2a}$ site producing an occupied $\mathrm{Ce}$$(4f^1)$ state below the Fermi level that adds a significant contribution to MCA and magnetic moment. A half $\mathrm{Ce}$ substitution forms a metallic state, while a full substitution retains the semiconducting state of the strontium hexaferrite (host). In the latter, the band gap is reduced due to the formation of charge-transferred states in the gap region of the host. The optical absorption coefficient shows an enhanced anisotropy between light polarization in parallel and perpendicular directions. Calculated formation energies, including the analysis of probable competing phases, and elastic constants confirm that both compositions are chemically and mechanically stable. With successful synthesis, the $\mathrm{Ce}$ hexaferrite can be an alternative high-performing critical-element-free permanent magnet material adapted for use in devices such as automotive traction drive motors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced spin-current tensor contribution in collision dynamics

The tensor and spin-orbit forces contribute essentially to the formation of the spin mean field, and give rise to the same dynamical effect, namely spin polarization. In this paper, based on time-dependent density functional calculations, we show that the tensor force, which usually acts like a small correction to the spin-orbit force, becomes more important in heavy-ion reactions and the effect increases with the mass of the system.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron-capture decay rate of {sup 7}Be-C{sub 60} by first-principles calculations based on density functional theory

Carrying out a first-principles calculation assuming linear relationship between the electron density at Be nucleus and the electron-capture (EC) decay rate, we explained why {sup 7}Be-C{sub 60} shows higher EC decay rate than {sup 7}Be crystal, which was originally found experimentally by Ohtsuki et al. [Phys. Rev. Lett. 93, 112501 (2004)]. From the results of the calculation, we found that there are inequivalent four stable (i.e., lower energy) Be sites inside C{sub 60} and that center of C{sub 60} (C{sub C60}) is the most favorable site. For C{sub C60}, the electron density at the Be nucleus is the highest. It is also much higher than that at the Be nucleus in a Be crystal. Also, we estimated the expected electron density at the Be nucleus at room temperature by taking statistical average of the electron densities at the four Be nucleus sites using the Boltzmann distribution. The results of the calculation show fairly good agreement with the experimental results. In this paper, we focus on the detail of calculation, which was not fully demonstrated in the paper by Ohtsuki.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗