Search NASA⌕ Search

SEARCH · Search NASA

Results for “depth profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

In situ production of terrestrial cosmogenic helium and some applications to geochronology

The concentrations of cosmogenic He-3 have been measured in a series of basaltic drill core samples from Hawaiian volcanoes Haleakala and Mauna Loa. The He-3 concentration in the surface of a radiocarbon dated Mauna Loa flow (20,000 years) gives reasonable agreement with a theoretical production rate of 140 atoms/g/yr, and suggests that the uncertainty in this rate is roughly 10 percent. The results illustrate the feasibility of using He-3 to measure exposure ages of young basaltic lava flows and for measuring erosion rates. Erosion rates calculated from the three Haleakala cores range from 7 to 11 meters/million years. The drill core data demonstrate that accurate depth control is crucial to the use and evaluation of cosmogenic helium. Depth profiles from several of the older cores display a nonexponential depth dependence of He-3(c) below 170 g/sq cm, which is attributed to the contribution from Li-6(n, alpha)T, where the neutrons are from stopped muons. This has important implications for depth dependence of cosmogenic He-3 because muons are weakly attenuated compared to the nucleonic component that produces spallation.

Kurz, Mark D.↗

Spatial density profile of electrons near the LaAlO{sub 3}/SrTiO{sub 3} heterointerface revealed by time-resolved photoluminescence spectroscopy

The depth profile of the electron density near the LaAlO{sub 3}/SrTiO{sub 3} heterointerface has been studied by means of time-resolved photoluminescence (PL) spectroscopy. A broad blue PL band is observed at 2.9 eV, originating from the two-carrier radiative recombination of interface-induced electrons and photoexcited holes. The PL lifetime of LaAlO{sub 3}/SrTiO{sub 3} heterointerface is dominated by the three-carrier Auger recombination of electrons and holes and is sensitive to electron density. We tuned the probing depth by changing the excitation photon energy and evaluated the carrier-density profile using the relation between the carrier density and the PL lifetime. Our non-contact probe method based on PL spectroscopy indicates that the carriers are confined within several nanometers in depth near the LaAlO{sub 3}/SrTiO{sub 3} heterostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of the lunar neutron density profile

An in situ measurement of the lunar neutron density from 20 to 400 g/sq cm depth between the lunar surface was made by the Apollo 17 Lunar Neutron Probe Experiment using particle tracks produced by the B10(n, alpha)Li7 reaction. Both the absolute magnitude and depth profile of the neutron density are in good agreement with past theoretical calculations. The effect of cadmium absorption on the neutron density and in the relative Sm149 to Gd157 capture rates obtained experimentally implies that the true lunar Gd157 capture rate is about one half of that calculated theoretically.

Woolum, D. S.↗

Oxide dissolution and oxygen diffusion scenarios in niobium and implications on the Bean–Livingston barrier in superconducting cavities

We generalize a native Nb2O5 dissolution model [G. Ciovati, Appl. Phys. Lett. 89, 022507 (2006)] to sequential overlayer dissolutions, multilayer dissolution, and realistic temperature profiles, which may be applicable to other materials. The model is applied to secondary ion mass spectrometry depth profile measurements for varying temperature profiles and two-step oxide dissolution in Nb and found to agree well. In the context of the Meissner screening response due to impurity profiles on the length scale of the London penetration depth, the shallow diffusion of O impurities results in a substantial decrease in the peak supercurrent density near the surface. In this framework, oxide dissolution and oxygen diffusion can account for a rise in peak supportable magnetic field in SRF cavities with baking time and a suppression after the optimal baking time is reached, in good agreement with peak-field baking temperatures and times as well as recent quench field measurements.

Lechner, Eric↗

Auger profiling of 'abrupt' LPE Al/x/Ga/1-x/As-GaAs heterojunctions

Auger analysis in conjunction with ion milling was used to study depth profiles of 'abrupt' Al/x/Ga/1-x/As-GaAs heterojunctions grown by liquid-phase epitaxial (LPE) techniques. Results are presented on samples with x = 0.43, 0.60, and 0.85. The interface widths obtained are listed in a table together with the growth conditions and the layer thicknesses. The values for the layer thicknesses are in the range from 125 to 950 A. It is found that for thin layers the interface widths do not differ greatly from the average value of 110A.

Garner, C. M.↗

Damage buildup in Ar-ion-irradiated 3 C -SiC at elevated temperatures

Above room temperature, the accumulation of radiation damage in 3 C -SiC is strongly influenced by dynamic defect interaction processes and remains poorly understood. Here, we use a combination of ion channeling and transmission electron microscopy to study lattice disorder in 3 C -SiC irradiated with 500 keV Ar ions in the temperature range of 25–250 °C. Results reveal sigmoidal damage buildup for all the temperatures studied. For 150 °C and below, the damage level monotonically increases with ion dose up to amorphization. Starting at 200 °C, the shape of damage–depth profiles becomes anomalous, with the damage peak narrowing and moving to larger depths and an additional shoulder forming close to the ion end of range. As a result, damage buildup curves for 200 and 250 °C exhibit an anomalous two-step shape, with a damage saturation stage followed by rapid amorphization above a critical ion dose, suggesting a nucleation-limited amorphization behavior. Despite their complexity, all damage buildup curves are well described by a phenomenological model based on an assumption of a linear dependence of the effective amorphization cross section on ion dose. Here, in contrast to the results of previous studies, 3 C -SiC can be amorphized by bombardment with 500 keV Ar ions even at 250 °C with a relatively large dose rate of ~2×10 13 cm -2 s -1 , revealing a dominant role of defect interaction dynamics at elevated temperatures.

36 MATERIALS SCIENCE↗

Deep Direct-Use Feasibility Study Temperature-Depth Estimates for West Virginia University, Morgantown, WV

This dataset contains data spreadsheets and figures that summarize the results of a stochastic analysis of temperatures at depth below the West Virginia University campus in Morgantown, WV. These results are extracted from a study by Smith (2019), whose results are included in a GDR submission that provides rasters and shapefiles for the Appalachian Basin states of New York, Pennsylvania, and West Virginia (GDR submission #1182). Uncertainties considered included geologic properties, thermal properties, and uncertainty from geostatistical interpolation of the surface heat flow. A Monte Carlo analysis of these uncertain properties was used to predict temperatures at depth using a 1-D heat conduction model. For the pixel corresponding to West Virginia University, a .csv file containing the 10,000 temperature-depth profiles estimated from a Monte Carlo analysis is provided. Temperatures are provided for depths from 1-5 km in 0.5 km increments. These data are summarized in a figure containing violin plots that illustrates the probability of obtaining certain temperatures at depth for Morgantown.

15 GEOTHERMAL ENERGY↗

Pulsed Thermal Tomography Nondestructive Examination of Additively Manufactured Reactor Materials and Components (Final Technical Report)

Metal Additive Manufacturing (AM) is a promising method for cost-efficient fabrication of complex shape structures for applications in harsh environment, such as in a nuclear reactor. However, internal defects (pores) occur in high-strength AM alloys, which are manufactured with Laser Powder Bed Fusion (LPBF) AM method. Pulsed Infrared Thermography (PIT) is an efficient nondestructive evaluation (NDE) method to examine actual structures, because this method offers one-sided non-contact measurements, and fast processing of large sample areas. However, imaging of material defects, particularly defects with sizes at microscopic level, is challenging. In this report, we benchmark the performance of several Unsupervised Learning (UL) algorithms designed to enhance imaging of microscopic defects in metals with PIT. UL aims to learn the latent principal patterns (dictionaries) in PIT data to detect defects with minimal human supervision. Performance of Independent Component Analysis (ICA), Sparse Coding (SC), Principal Component Analysis (PCA) and Exploratory Factor Analysis (EFA) was compared using F-score, UL model training time and defects reconstruction time. We obtained the average F-score of 0.75, and a highest F-score of 0.89 for the EFA algorithm. Overall, EFA outperforms other UL algorithms considered in this study. In another approach, we investigate Thermal Tomography (TT), which is a computational method for reconstruction of depth profile of internal material defects from PIT nondestructive evaluation (NDE). TT algorithm obtains depth reconstructions of thermal effusivity, which has been shown to provide visualization of subsurface internals defects in metals. In many applications, one needs to determine the defect shape and orientation from reconstructed effusivity images. Interpretation of TT images is non-trivial because of blurring, which increases with depth due to heat diffusion-based nature of image formation. We have developed a deep learning convolutional neural network (CNN) to classify size and orientation of subsurface material defects in TT images. CNN was trained with TT images produced with computer simulations of 2D metallic structures (thin plates) containing elliptical subsurface voids. Performance of CNN was investigated using test TT images developed with computer simulations of plates containing elliptical defects, and defects with shape imported from scanning electron microscopy (SEM) images. CNN demonstrated the ability to classify radii and angular orientation of elliptical defects in previously unseen test TT images. We have also demonstrated that CNN trained on TT images of elliptical defects is capable of classifying shape and orientation of irregular defects. Training the CNN on irregular defect shapes instead of on elliptical shapes would make the resulting classifications more descriptive of actual defect shapes. However, this requires a much higher volume of SEM images of material defects, which are difficult to obtain because of random occurrence of defects in LPBF. To address this challenge, we developed a generative adversarial network (GAN) to augment the existing dataset of SEM defect images. The GAN model is demonstrated to create novel yet realistic defect shapes that can be used as input for simulated PTT images to train CNN. We also investigate several approaches based on Gaussian Random Circle and Bezier Curves for constructing parametric models of irregular-shape defects.

36 MATERIALS SCIENCE↗

Simulation of collisional transport processes and the stability of planetary rings

The utility of the phase-space fluid method for the study of planetary ring dynamics is presently demonstrated through the numerical solution of a model kinetic equation for a flattened Keplerian disk. Attention is given to ringlets composed of single-sized particles, as well as to ringlets composed of two different-sized particles; in the latter case, the ringlets evolve in such a way that the lighter particles are confined by the heavier ones. The results obtained indicate that some natural process may sharpen the optical depth profile of edges even without an external forcing mechanism, and that intermediate optical depths are dynamically preferred in some cases.

Brophy, Thomas G.↗

Saturn's central flash from the 3 July 1989 occultation of 28 Sgr

We present observations of Saturn's central flash obtained from Palomar and McDonald Observatories during the 3 July 1989 occultation of 28 Sgr. As the star passed close to the geometric center of Saturn's shadow, the focusing of the incident starlight by the planet's atmosphere formed multiple stellar images along the limb which were detected in infrared images obtained at wavelengths of 3.9 (Palomar) and 2.1 microns (McDonald). These are the first reported observations of a central flash due to Saturn, and the first of any planet in which the signal flash from each stellar image could be determined separately, permitting a comparison of both intensity and position for each image with model predictions. Four separate flashes were observed from each observatory, corresponding to points on the limb where the starlight passed through the Cassini Division and the relatively transparent C Ring, with maximum brightness reaching 1-2% of the unocculted stellar intensity. The timing of the flashes is quite sensitive to the shape of Saturn's limb, which depends in turn on the planet's zonal gravity harmonics and on the zonal wind profile in the lower stratosphere, near the 2.5-mbar pressure level. The locations of the images along the limb, as well as the timing, shapes, and amplitudes of the individual flash light curves, are well matched by a smoothed model based on a tropospheric zonal wind profile obtained from tracking cloud features in Voyager images and the Saturn ring optical depth profile obtained from the Voyager Photopolarimeter experiment. The smoothing required to give the best match to the data exceeds that attributable to the finite angular extent of the occulted star and may be due to refractive scattering by turbulence or wave structure in Saturn's atmosphere. There is no evidence of significant atmospheric absorption at the observed wavelengths, which correspond to spectral regions of weak methane absorption.

Nicholson, Philip D.↗

Understanding the limitations and potential of micro tensile testing of tungsten and needs for crystal plasticity modelling

Tungsten is the leading plasma facing material candidate due to its exceptional properties. Understanding the response to neutron irradiation is crucial for the lifetime evaluation of tungsten. The limited space in nuclear reactors and the high levels of radioactivity of the specimens after irradiation are significant barriers to accurately measuring the mechanical properties after neutron irradiation. Testing of micro tensile specimens is one approach to reduce the total amount of irradiated material needed for a set of mechanical testing experiments. However, micro samples are not necessarily measuring the bulk material properties, as size effects produce higher measured mechanical properties than is observed in engineering size counterparts. Determining the minimal sample size for reliable bulk property measurement, combined with modeling efforts, is essential. We conducted room temperature tensile tests on tungsten micro tensile specimens fabricated with focused ion beam, plasma focused ion beam and femto-second laser ablation system to dimension of 2×2×7?µm³, 7×7×18?µm³, and 80×100×233?µm³ (width×thickness×gauge-length), respectively. Elevated tensile testing was performed up to 475°C on 5×5×18?µm³ specimens fabricated with focused ion beam. The smallest specimens exhibited a high degree of ductility and strength, whereas the largest specimens demonstrated behavior akin to bulk tungsten. To investigate the effects introduced by the micro specimen fabrication processes and to obtain the necessary bulk dislocation density for the crystal plasticity model, we employed X-ray diffraction depth profiling. This measurement was performed using different X-ray sources with varying penetration depths. Finally, the potential and limitations of micro mechanical tests for tungsten will be discussed.

36 - MATERIALS SCIENCE↗

Divergent Responses of Forest Soil Microbial Communities under Elevated CO 2 in Different Depths of Upper Soil Layers

Numerous studies have shown that the continuous increase of atmosphere CO 2 concentrations may have profound effects on the forest ecosystem and its functions. However, little is known about the response of belowground soil microbial communities under elevated atmospheric CO 2 (eCO 2 ) at different soil depth profiles in forest ecosystems. In this paper, we examined soil microbial communities at two soil depths (0 to 5 cm and 5 to 15 cm) after a 10-year eCO 2 exposure using a high-throughput functional gene microarray (GeoChip). The results showed that eCO 2 significantly shifted the compositions, including phylogenetic and functional gene structures, of soil microbial communities at both soil depths. Key functional genes, including those involved in carbon degradation and fixation, methane metabolism, denitrification, ammonification, and nitrogen fixation, were stimulated under eCO 2 at both soil depths, although the stimulation effect of eCO 2 on these functional markers was greater at the soil depth of 0 to 5 cm than of 5 to 15 cm. Moreover, a canonical correspondence analysis suggested that NO 3 -N, total nitrogen (TN), total carbon (TC), and leaf litter were significantly correlated with the composition of the whole microbial community. This study revealed a positive feedback of eCO 2 in forest soil microbial communities, which may provide new insight for a further understanding of forest ecosystem responses to global CO 2 increases. The concentration of atmospheric carbon dioxide (CO 2 ) has continuously been increasing since the industrial revolution. Understanding the response of soil microbial communities to elevated atmospheric CO 2 (eCO 2 ) is important for predicting the contribution of the forest ecosystem to global atmospheric change. This study analyzed the effect of eCO 2 on microbial communities at two soil depths (0 to 5 cm and 5 to 15 cm) in a forest ecosystem. Our findings suggest that the compositional and functional structures of microbial communities shifted under eCO 2 at both soil depths. Finally, more functional genes involved in carbon, nitrogen, and phosphorus cycling were stimulated under eCO 2 at the soil depth of 0 to 5 cm than at the depth of 5 to 15 cm.

54 ENVIRONMENTAL SCIENCES↗

Direct measurement of surface carbon concentrations for lunar soil breccias

A nuclear reaction depth profiling technique previously described by Filleux et al. (1977) has been used to measure the depth distribution of C on grain surfaces for Apollo 11, 15, 16 and 17 soil breccias. The surface C concentration of all samples studied lies between 2 and 8 times 10 to the 15th atoms per sq cm, showing no correlation with the volume C, which varies over an order of magnitude. If the observed variation represents the presence of unexposed grains on the surfaces studied, these results indicate a steady state surface C concentration of 5 to 10 times 10 to the 15th atoms per sq cm, accumulated over a time scale short compared with that required for the formation of volume-related C and with the mean lifetime of grains at the lunar surface. About one-third to one-half of the total C in lunar soil seems to be surface-correlated.

Filleux, C.↗

Lateral density variations in elastic Earth models from an extended minimum energy approach

Kaula's minimum energy approach was extended to include the nonhydrostatic gravitational potential energy and the density perturbation field was obtained to degree and order eight. The depth profiles for the density perturbation show a stratification with density excesses and deficiencies alternating with depth. The addition of the gravitational potential energy in the minimization process does not change significantly the conclusions based on results for the minimum shear strain energy case, concerning the inability of the mantle to withstand the lateral loading elastically.

Sanchez, B. V.↗

TPSAS-NF1676L-34796-DND

The recently completed 2015-2017 EVS-2 mission NAAMES (The North Atlantic Aerosols and Marine Ecosystems Study) provides a unique set of airborne remote sensing and ship-based in situ measurements in a remote and under-sampled region of the Earth?s ocean. The NASA SABOR (Ship-Aircraft Bio-Optical Research) campaign was conducted during the summer of 2014, also in the Atlantic Ocean, out of the Chesapeake Bay and in the eastern coastal region of the United States. For both campaigns, the NASA GISS Research Scanning Polarimeter, a multi-angle, multi-spectral polarimeter measured the upwelling polarized radiances from aircraft. And for both campaigns, ship-based in situ measurements of the ocean were collected jointly with the aircraft measurements. We present results from the new RSP-MAPP (1) that is based on optimal estimation and that can retrieve simultaneous aerosol microphysical properties (including effective radius, single-scattering albedo, and real refractive index) and ocean color products using accurate radiative transfer, Mie calculations, and the DP (Detritus Plankton) series of accurate, numerically efficient ocean bio-optical models. The RSP-MAPP algorithm was applied to data collected during SABOR and NAAMES to retrieve aerosol microphysics and ocean products for all Aerosols-Above-Ocean (AAO) scenes. The RSP-MAPP products are compared against i) collocated aerosol extinction and backscatter profiles collected by the NASA LaRC airborne High Spectral Resolution Lidar (HSRL-1), including lidar depth profiles of the ocean diffuse attenuation coefficient and the hemispherical backscatter coefficient, and ii) collocated ship-based in situ measurements of the ocean.

Snorre Stamnes↗

How deep should we go to understand roots at the top of the world?

Harsh environmental conditions and the short summers of northern, high-latitude biomes impose unique constraints on the plants that live in the arctic tundra and the boreal forest. To escape the harsh aboveground environment, plants in these habitats often allocate a large portion of their biomass belowground to facilitate nutrient acquisition. In turn, the proximity of living plant roots to vast stores of sequestered soil carbon in these biomes means that shifts in rooting depth distribution and the size of the root–soil interface could significantly contribute to ongoing climate change. Indeed, plant ‘priming’ of rhizosphere decomposition via root exudation, particularly from shallowly distributed roots, can lead to losses of carbon from tundra soils. While we have a hard-won understanding of the distribution of plant communities across the arctic tundra and the boreal forest from direct field observations scaled to the landscape level using climate-informed mapping techniques (i.e. the Circumpolar Arctic Vegetation Map (CAVM); Walker et al. , 2005), these vegetation maps are only the tip of the iceberg (Iversen et al. , 2015). Root form and function remain hidden beneath the land surface. In an article recently published in New Phytologist , Blume-Werry et al. (2023, 10.1111/nph.18998) asked whether rooting depth distribution, and ensuing carbon emissions, could be inferred from commonly used vegetation mapping classifications across the pan-Arctic. An important question to guide our understanding, mapping, and prediction of belowground characteristics and ecosystem feedbacks at the top of the world. Unfortunately, they found that the answer was ‘not quite’. While rooting depth distribution varied demonstrably, in turn causing substantial changes in modeled carbon emissions via rhizosphere ‘priming’, variation across rooting depth profiles did not correspond with vegetation mapping classes. If we are unable to predict belowground rooting depth distributions across large spatial scales by leveraging aboveground vegetation community distributions, how then should belowground researchers proceed?

59 BASIC BIOLOGICAL SCIENCES↗

SIMS of organics—Advances in 2D and 3D imaging and future outlook

Secondary ion mass spectrometry (SIMS) has become a powerful technique for the label-free analysis of organics from cells to electronic devices. The development of cluster ion sources has revolutionized the field, increasing the sensitivity for organics by two or three orders of magnitude and for large clusters, such as C{sub 60} and argon clusters, allowing depth profiling of organics. The latter has provided the capability to generate stunning three dimensional images with depth resolutions of around 5 nm, simply unavailable by other techniques. Current state-of-the-art allows molecular images with a spatial resolution of around 500 nm to be achieved and future developments are likely to progress into the sub-100 nm regime. This review is intended to bring those with some familiarity with SIMS up-to-date with the latest developments for organics, the fundamental principles that underpin this and define the future progress. State-of-the-art examples are showcased and signposts to more in-depth reviews about specific topics given for the specialist.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Atmospheric-pressure Molecular Imaging of Biological Tissues and Biofilms by LAESI Mass Spectrometry

Ambient ionization methods in mass spectrometry allow analytical investigations to be performed directly on a tissue or biofilm under nativelike experimental conditions. Laser ablation electrospray ionization (LAESI) is one such development and is particularly well-suited for the investigation of water-containing specimens. LAESI utilizes a mid-infrared laser beam (2.94 μm wavelength) to excite the water molecules of the sample. When the ablation fluence threshold is exceeded, the sample material is expelled in the form of particulate matter and these projectiles travel to tens of millimeters above the sample surface. In LAESI, this ablation plume is intercepted by highly charged droplets to capture a fraction of the ejected sample material and convert its chemical constituents into gas-phase ions. A mass spectrometer equipped with an atmospheric-pressure ion source interface is employed to analyze and record the composition of the released ions originating from the probed area (pixel) of the sample. A systematic interrogation over an array of pixels opens a way for molecular imaging in the microprobe analysis mode. A unique aspect of LAESI mass spectrometric imaging is depth profiling that, in combination with lateral imaging, enables threedimensional (3D) molecular imaging. With current lateral and depth resolutions of ~100 μm and ~40 μm, respectively, LAESI mass spectrometric imaging helps to explore the molecular structure of biological tissues. Herein, we review the major elements of a LAESI system and provide guidelines for a successful imaging experiment.

59 BASIC BIOLOGICAL SCIENCES↗