Search NASA⌕ Search

SEARCH · Search NASA

Results for “duty cycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Atlanta—1991 Household Interview Survey

The Atlanta Regional Commission conducted a Household Travel Survey in 1991 to capture the reality of the locale, including infrastructure improvements—such as new highways, rail, and housing developments—additional households, income, trip chaining, and telecommuting, as well as other typical demographic characteristics. The survey collected demographic, socioeconomic, and travel information on work and non-work travel behavior. Travel data includes trip generation, trip distribution, and modal choice for 3,626 households that completed a travel log.

1Hz data↗
DOE OSTI2026

1993 Baltimore Household Travel Survey

The 1993 Baltimore Household Travel Survey is a detailed survey of demographic characteristics and travel patterns for 2,692 households in Baltimore, Maryland. The original goal of the survey was to collect an “ideal” dataset for disaggregate travel demand analysis.

1Hz data↗
DOE OSTI2026

1991 California Statewide Travel Survey

The California Statewide Travel Survey was conducted in 1991. Data were collected from 17,040 households throughout the state, with a minimum of 500 samples in any one region. The survey was primarily used to update trip generation rates.

1Hz data↗
DOE OSTI2026

1998 Dallas-Fort Worth Travel Survey

The 1998 Dallas-Fort Worth House Travel Survey accomplished two main goals: updating existing data for the North Central Texas Council of Governments regional travel demand models and providing new data to permit the models to be upgraded. The survey encompassed households within the Consolidated Metropolitan Statistical Area of Dallas-Fort Worth. A total of 4,641 households provided complete information. The survey revealed households' travel behavior preference with the collection of information about household characteristics and travel using a unique "travel as an activity" approach.

1Hz data↗
DOE OSTI2026

1999 Dallas-Fort Worth Travel Survey

The 1999 Dallas-Fort Worth House Travel Survey accomplished two main goals: updating the existing data for the North Central Texas Council of Governments regional travel demand models and providing new data to permit the models to be upgraded. The survey encompassed households within the Consolidated Metropolitan Statistical Area of Dallas-Fort Worth. A total of 4,641 households provided complete information. The survey revealed households' travel behavior preference with the collection of information about household characteristics and travel using a unique "travel as an activity" approach.

1Hz data↗
DOE OSTI2026

2000 Evansville Household Travel Survey

The Evansville Metropolitan Planning Organization conducted a household travel survey in 2000. This study aimed to produce a detailed analysis of travel behavior for the residents of the Evansville Metropolitan Area. The survey contains data from 1,737 participating households. From participants' travel records, a total of 20,096 trips were reported by 4,069 people for a 24-hour period.

1Hz data↗
DOE OSTI2026

1996 Tampa Bay Regional Travel Survey

This study was conducted on behalf of the Florida Department of Transportation. The purpose of the survey was to understand day-to-day travel across the Tampa Bay region. Demographic, socioeconomic, and travel data were gathered from 5,349 households that participated in the study, and a total of 31,465 trips were recorded.

1Hz data↗
DOE OSTI2026

1993 Tucson Household Travel Survey

The Arizona Department of Transportation (ADOT) conducted a Tucson Household Travel Survey in 1993. ADOT conducts such surveys every five to seven years, providing an essential snapshot of transportation behaviors and trends by asking how members of a household get around on a single day. The answers helped state, local, and federal officials decide when, where, and how to invest limited transportation funding to improve roads, public transportation, sidewalks, bike paths, and more. Demographic, socioeconomic, and travel information was gathered from 4,564 participants associated with 1,913 households. Participants received travel logs to record where members of their household went on an assigned travel day.

1Hz data↗
DOE OSTI2026

2000 Tucson Household Travel Survey

The Arizona Department of Transportation (ADOT) conducted a Tucson Household Travel Survey in 2000. ADOT conducts such surveys every five to seven years, providing an essential snapshot of transportation behaviors and trends by asking how members of a household get around on a single day. The answers helped state, local, and federal officials decide when, where, and how to invest limited transportation funding to improve roads, public transportation, sidewalks, bike paths, and more. Demographic, socioeconomic, and travel information was gathered from 4,882 participants associated with 2,076 households. Participants received travel logs to record where members of their household went on an assigned travel day.

1Hz data↗
DOE OSTI2026

1970 Home Interview Survey

The 1970 Home Interview Survey was conducted by Twin Cities Metropolitan Council, Saint Paul. This database was used to develop mathematical models to predict future regional travel patterns, which were used to develop appropriate regional transportation policies, plans, and programs. The 1970 survey did not specifically include walking or bicycling as options in the travel diary; instead, these trips are included in a broad “other” category.

1Hz data↗
DOE OSTI2024

Electric light-duty vehicles have decarbonization potential but may not reduce other environmental problems

Electric vehicles are promoted as ‘clean’ technologies and offer promising reductions in transportation emissions. Nevertheless, their environmental benefits critically depend on the local electricity grid mix and the type of emission being considered. Here, we conduct a comparative life cycle assessment of the four dominant light-duty vehicle categories at both the global scale and in three representative countries: Norway, the US, and China. By analyzing different environmental indicators, particularly global warming potential and respiratory effects, and quantifying related parametric uncertainties, we reveal that the advantages of electric vehicles vary across these regions and across environmental impact types. While electric vehicles offer considerable decarbonization potential as the grid mix becomes cleaner, they might not mitigate other environmental impacts, such as increased respiratory effects on rural, low-income communities. Our results support stakeholders in identifying environmentally friendly vehicle and policy options while considering multiple factors, and emphasize the importance of tailored approaches over one-size-fits-all solutions in sustainable transportation.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

Influence of Fuel Properties on Gasoline Direct Injection Particulate Matter Emissions Over First 200 s of World-Harmonized Light-Duty Test Procedure Using an Engine Dynamometer and Novel “Virtual Drivetrain” Software

Abstract The influence of fuel properties on particulate matter (PM) emissions from a catalytic gasoline particulate filter (GPF) equipped gasoline direct injection (GDI) engine was investigated using novel “virtual drivetrain” software and an engine mated to an engine dynamometer. The virtual drivetrain software was developed in labview to operate the engine on an engine dynamometer as if it were in a vehicle undergoing a driving cycle. The software uses a physics-based approach to determine vehicle acceleration and speed based on engine load and a programed “shift” schedule to control engine speed. The software uses a control algorithm to modulate engine load and braking to match a calculated vehicle speed with the prescribed speed trace of the driving cycle of choice. The first 200 s of the World-harmonized Light-duty Test Procedure (WLTP) driving cycle was tested using six different fuel formulations of varying volatility, aromaticity, and ethanol concentration. The first 200 s of the WLTP was chosen as the test condition because it is the most problematic section of the driving cycle for controlling PM emissions due to the cold start and cold drive off. It was found that there was a strong correlation between aromaticity of the fuel and the engine-out PM emissions, with the highest emitting fuel producing more than double the mass emissions of the low PM production fuel. However, the post-GPF PM emissions depended greatly on the soot loading state of the GPF. The fuel with the highest engine-out PM emissions produced comparable post-GPF emissions to the lowest PM producing fuel over the driving cycle when the GPF was loaded over three cycles with the respective fuels. These results demonstrate the importance of GPF loading state when aftertreatment systems are used for PM reduction. It also shows that GPF control may be more important than fuel properties, and that regulatory compliance for PM can be achieved with proper GPF control calibration irrespective of fuel type.

Energy & Fuels↗
DOE OSTI2024

Analyzing Potential Greenhouse Gas Emissions Reductions from Plug-In Electric Vehicles: Report for CRC Project, "Carbon Return on Investment for Electrified Vehicles"

Investment in battery and electrification technologies has the potential to greatly reduce vehicular greenhouse gas (GHG) emissions, as a battery-electric vehicle (BEV) will have zero tailpipe emissions. However, there will be GHG emissions associated with production of the vehicle including its battery, and with any carbon-emitting electricity sources used to charge the vehicle. This study explores the GHG reduction benefits of different plug-in electric vehicle (PEV) designs in the context of factors such as electricity production mix, per-vehicle battery requirements, and varying battery market growth scenarios. The analyses focus on the U.S. light-duty vehicle (LDV) market, which accounts for nearly 60% of U.S. transportation sector GHG emissions - over twice as much as the next largest contributing transportation sub-sector.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

A Hybrid Heavy Duty Diesel Power System for Off-Road Applications—Concept Validation

A multiyear power system R&D program was completed with the objective of developing an off-road hybrid heavy duty diesel engine with front end accessory drive-integrated energy storage. This system was validated to deliver 10.5–25.6% reduction in fuel consumption over current Tier 4 Final-based 18L diesel engines, over various off-road machine application cycles. The power system consisted of a downsized heavy-duty diesel 13L engine containing advanced combustion technologies, capable of elevated peak cylinder pressures and thermal efficiencies, thermal barrier coatings, exhaust waste heat recovery via SuperTurbo™ turbocompounding, and hybrid energy assisting and recovery through both mechanical and electrical systems. Following the concept definition, design, and analysis phases of the program, the final phase focused on building and validating the performance and efficiency in laboratory tests. While aspects of the system such as start/stop and reduced off-road cooling package energy losses were only analytically evaluated, the main 13L concept engine with full hybrid system was successfully built and tested in steady-state and in transient certification and real-world application cycles. Extensive simulations in Caterpillar's DYNASTY™ software environment utilized the validation test data to assess performance more fully and confidently over varied cycles and strategies. An average fuel consumption reduction of 17.9% was realized, and the majority (~13%) of the benefit stemmed from the core concept 13L engine. In conclusion, a total cost of ownership analysis provides context to commercial viability and where adoption focus should be placed.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2021

A framework for characterizing the ambient conditions experienced by light duty vehicles in the United States

The relationship between ambient conditions and light-duty vehicle energy consumption has been widely researched. Relatively little effort, however, has been dedicated to understanding representative ambient conditions a light-duty vehicle may experience. As such, the framework introduced in this article provides a means of quantifying ambient conditions specific to light-duty vehicle operation by incorporating both when and where vehicles are driven. The analysis presented expands the literature beyond solely focusing on temperature; distributions for humidity, solar irradiance, and air density are also included. A procedure is presented that calculates the ambient condition distributions for each metric by relating open-source data sets describing representative vehicle utilization and representative ambient conditions. While this study explores ambient conditions related to light-duty vehicle utilization, the framework may also be applied to separate vocations. Finally, the article concludes with an example use case of the ambient condition weighting process. A binning methodology is introduced that facilitates insight into vehicle energy consumption in response to ambient conditions at the national and local levels while minimizing the number of tests or simulations required.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Artificial Neural Networks for In-Cycle Prediction of Knock Events

Downsized turbocharged engines have been increasingly popular in modern light-duty vehicles due to their fuel efficiency benefits. However, high power density in such engines is achieved thanks to high in-cylinder pressure and temperature conditions that increase knock propensity. Next-cycle control has been studied as a method to reduce the damaging effects of knock by operating the engine in a low knock probability condition. This exploratory study looks at the feasibility of in-cycle knock prediction as a tool for advanced knock control algorithms. A methodology is proposed to 1) choose in-cycle features of the pressure trace that highly correlate with knock events and 2) train artificial neural networks to predict in-cycle knock events before knock onset. The methodology was validated at different operating conditions and different levels of generalization. Precision and recall were used as metrics to evaluate the binary classifier. However, the Fowlkes-Mallows (FM) index was used to compare the result of the clustering algorithm at different operating conditions. The results showed a maximum FM index of 0.7 when the prediction was done at knock onset and a minimum FM index of 0.45 when the prediction was done at spark timing.

42 ENGINEERING↗
DOE OSTI2025

HOLISTIC ENERGY EFFICIENCY ANALYSIS OF ELECTRIFIED OFF-HIGHWAY MATERIAL HANDLER: FROM DRIVE CYCLE CHARACTERIZATION TO POWERTRAIN, HYDRAULIC, AND THERMAL SYSTEM PERFORMANCE

Three complexities surrounding the operation and testing of hybrid electric, heavy-duty nonroad machines have been addressed experimentally and using 1D simulation. Their resolutions have been intertwined with the development of a prototype machine that was proven to reduce fuel consumption in excess of 20%. A real-world drive cycle that leveraged hydraulic cylinder position was developed and utilized to ensure accurate reproduction of hydraulic work between the baseline and hybrid machines, while simultaneously maintaining less than 5% RMS error in position for main load handling functions. The newly developed, machine-specific drive cycle also contributed towards making equivalent comparisons in energy consumption between machine types through composite performance metrics that were extrapolated over a typical shift duration. Lastly, this work addressed thermal management energy consumption, a topic of increasing popularity when discussing electrified vehicles, by proposing a 1.4% energy savings through special mechanization and control of cooling system components.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗