Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrostatic interaction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Heterostructured Lepidocrocite Titanate-Carbon Nanosheets for Electrochemical Applications

Lepidocrocite-type titanates that reversibly intercalate sodium ions at low potentials (~0.6 V vs Na/Na + ) are promising anode candidates for sodium-ion batteries. However, large amounts of carbon additives are often used to improve their electrical conductivity and overcome poor cycling performance in the electrode composites. To ameliorate electronic transport issues of lepidocrocite titanate (K 0.8 Ti 1.73 Li 0.27 O 4 , KTL) in sodium-ion batteries, we have designed and synthesized heterostructures of exfoliated lepidocrocite-type titanium oxide (LTO) nanosheets with alternating carbon layers via a solution-based self-assembly approach. Positively charged dopamine (Dopa) was used as the carbon precursor and intercalated between negatively charged exfoliated titania nanosheets through electrostatic interaction. Dopa-intercalated LTO was then annealed under argon to form conductive carbon layers between titania sheets. The carbon content in the heterostructures was controlled by modifying the self-assembly conditions (i.e., pH, stirring duration, and Dopa-to-LTO ratio). Electrodes were prepared using carbonized heterostructures (LTO-C) without adding more carbon to the composites and tested in sodium half-cell configurations. Further, higher capacities and improved capacity retention over 250 cycles and lower impedance were observed, as the carbon content of LTO-C heterostructures was increased from 0% (LTO nanosheets) to 30%. These results indicate that the self-assembly approach for 2D heterostructured electrode materials is a promising strategy to overcome electronic transport limitations of layered transition-metal oxides and improve their electrochemical performance for next-generation energy storage applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Tailoring Piezoelectricity of 3D Printing PVDF-MoS 2 Nanocomposite via In Situ Induced Shear Stress

3D printing of unique structures with tunable properties offers significant advantages in the fabrication of complex and customized electronic devices. Here, this study introduces a process-microstructure–property-guided manufacturing route to fabricate PVDF-2D MoS 2 piezoelectric nanocomposites with tunable piezoelectric properties without having a postprocess. We control PVDF’s microstructure through direct ink writing (DIW) 3D printing while tuning PVDF-MoS 2 interfacial strain by controlling rheology and 3D printing parameters, such as nozzle size and printing speed. Our approach demonstrates tunable piezoelectricity in PVDF-MoS 2 , achieving a 15-fold increase in the piezoelectric coefficient (d 33 ) at a printing-induced shear stress of 6685 Pa. This enhancement arises from the electrostatic interactions between PVDF and MoS 2 and the filler distribution and alignment caused by the in situ shear stress in 3D printing, as confirmed by XPS and Raman mapping analyses. Our findings advance the understanding of piezoelectric mechanisms in PVDF-based nanocomposites, laying the foundation for 3D printing of piezoelectric sensors in wearable device applications with enhanced performance and customization capabilities.

2D MoS2↗
DOE OSTI2018

Confined Ionic Liquid in an Ionic Porous Aromatic Framework for Gas Separation

Ionic liquids (ILs) and porous frameworks are commonly employed in gas separation, but rarely together. To leverage their combined advantages, we designed a novel system comprising an ionic liquid inside a charged porous-polymer framework. A positively charged ionic porous aromatic framework was impregnated with an ionic liquid to confine the cations and anions inside the polymeric framework via electrostatic interactions. Molecular dynamics and free energy simulations were performed to determine the solubility, diffusivity, and hence permeability of CO 2 and CH 4 through the composite material. We found that the polymeric framework introduces nanoscale space in the confined IL, improving gas solubility, while the IL promotes gas transport in the porous structure. Here, the confinement impacts CO 2 and CH 4 very differently regarding their solubility and diffusivity. Through tuning of the ionic-liquid loading, both high CO 2 permeability and high CO 2 /CH 4 selectivity could be achieved, overcoming the Robeson upper bound. This work highlights the advantages of confined ionic liquids in an ionic porous-polymer framework in enhancing selective gas separation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dehydration of Methyl Lactate on Alkali Cation-Exchanged Faujasite: Effects of Metal Cation Identity and Water Pressure

Turnover rates for the catalytic dehydration of methyl lactate (ML) over ion-exchanged faujasite (FAU) catalysts depend on the identity of alkali metal cations (Na + , K + , Cs + ) and local solvation effects. Analysis of rate measurements and in situ infrared spectroscopy gives evidence that the reaction involves kinetically relevant dissociation of adsorbed methyl lactate upon alkali metal cations. This process involves concerted methyl transfer to the surface and dissociation of the alkali metal from the framework, which occurs at cationic active sites that remain predominantly unoccupied under relevant conditions (0.5–10 kPa ML, 0.5–15 kPa H 2 O, 563–583 K). Despite the mechanistic similarities, apparent activation enthalpies (ΔH app ‡ ) decrease linearly (47 kJ mol –1 from Na + to Cs + ) with ionization energy and cationic radius, and apparent activation entropies (ΔS app ‡ ) decrease 74 J mol –1 K –1 . These trends reflect electrostatic interactions that stabilize the cations to the anionic sites on the zeolite: stronger association between these charges leads to increasingly endothermic processes to displace the alkali metal to form a cationic methoxy and an intrapore metal lactate intermediate. Water physisorption measurements suggest alkali metal ions bind superstoichiometric quantities of water within FAU pores, and in situ infrared spectra suggest the concerted adsorption of ML requires reorganization of this water. Consequently, these processes introduce entropic gains that partially offset entropy losses associated with ML adsorption. Hence, turnover rates differ only by a factor of 2 among Na-, K-, and Cs-FAU at 573 K (ΔΔG app ‡ = 5 kJ mol –1 ). These findings demonstrate the interplay of alkali metal ions with zeolite active sites and intrapore water clusters for ML dehydration, indicating that these interactions can be leveraged to deliver optimal performance under different reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

A Unified Description of Salt Effects on the Liquid–Liquid Phase Separation of Proteins

Protein aggregation via liquid-liquid phase separation (LLPS) is ubiquitous in nature and is intimately connected to many human diseases. Although it is widely known that the addition of salt has crucial impacts on the LLPS of proteins, full understanding of the salt effects remains an outstanding challenge. Here, we develop a molecular theory that systematically incorporates the self-consistent field theory for charged macromolecules into the solution thermodynamics. The electrostatic interaction, hydrophobicity, ion solvation, and translational entropy are included in a unified framework. Our theory fully captures the long-standing puzzles of the nonmonotonic salt concentration dependence and the specific ion effect. We find that proteins show salting-out at low salt concentrations due to ionic screening. The solubility follows the inverse Hofmeister series. In the high salt concentration regime, protein continues salting-out for small ions but turns to salting-in for larger ions, accompanied by the reversal of the Hofmeister series. We reveal that the solubility at high salt concentrations is determined by the competition between the solvation energy and translational entropy of the ion. Furthermore, we derive an analytical criterion for determining the boundary between the salting-in and salting-out regimes, which is in good agreement with experimental results for various proteins and salt ions.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Unconventional Relation between Charge Transport and Photocurrent via Boosting Small Polaron Hopping for Photoelectrochemical Water Splitting

Doping in semiconductor photoelectrodes controls defect formation and carrier transport that critically determine the device performance. Here we report an unconventional carrier transport relation that is tuned by extrinsic molybdenum (Mo) doping in BiVO 4 photoanodes. Using the single-crystalline thin film approach, we identify that Mo doping significantly condenses the optimization regime between carrier transport and photon collection. For Mo-doped BiVO 4 films, an unprecedentedly thin layer (50 nm), less than one-third of the pristine BiVO 4 thickness, delivers larger photocurrents by overcoming the charge transport limitation, representing a regime not covered in conventional models. We provide direct evidence that Mo doping improves electron transport by boosting not only the donor density but also the electron mobility in the form of a small polaron, with the latter applying substantial impact on the photoelectrochemical performance. Density functional theory calculations reveal that fully ionized Mo dopants establish a strong electrostatic interaction with a small polaron, which helps reduce its hopping barrier by minimizing the local lattice expansion. Here, our results deliver mechanistic insights on the interplay between extrinsic doping and carrier transport, and provide guidance in developing advanced semiconductor photoelectrodes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Modulating Microphase Separation of Lamellae-Forming Diblock Copolymers via Ionic Junctions

In this work, we present a molecular dynamics simulation study investigating the phase behavior of lamellae-forming diblock copolymers with a single ionic junction on the backbone. Our results show qualitative agreement with experimental findings regarding enhanced microphase separation with the introduction of an ionic junction at the conjunction point, while further revealing nonmonotonic changes in domain spacing and order–disorder transition as a function of the electrostatic interaction strength. This highlights the dominant roles of entropic and binding effects of counterions under weak and strong ionic correlations, respectively. The location of the ionic junction is found to effectively modulate the charge distribution and chain conformation in the ordered domains; its presence in the middle of a block promotes folding of the block, leading to a smaller domain size. These findings demonstrate the interplay of ionic coupling with steric hindrance and chain end effects, which enhances our understanding of the delicate control over the microphase domain features.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Tunable Nanoscale Structure via Divalent Ion Identity in Charged-Neutral Polymer Blends

Charged-neutral polymer blends, wherein an ioncontaining polymer is blended with a neutral polymer, are potential candidates for battery electrolytes due to their improved ion transport properties and electrochemical stability. Though electrostatic interactions in charged polymer blends can theoretically stabilize ordered nanostructures analogous to those observed in neutral block copolymers, direct experimental evidence remains limited. Here, we investigate the effects of divalent cation identity on the nanoscale morphology of charged-neutral polymer blends composed of poly(ethylene oxide) (PEO) and Mg 2+ or Ca 2+ ioncontaining polymers, poly[3-(methylacryloxy)propylsulfonyl-1-(trifluoromethanesulfonylimide)] (P(Mg(MTFSI) 2 ) or P(Ca- (MTFSI) 2 ). By tuning the size of the divalent counterion, we are able to precisely tune the ion solvation between the free cation and PEO, which acts as a solvent in this system. Differential scanning calorimetry (DSC) and small-angle X-ray scattering (SAXS) measurements reveal that Mg 2+ and Ca 2+ ions induce distinct structural behavior. In both systems, the blends become more miscible as the concentration of ion-containing polymer is increased indicated by increased suppression of PEO crystallinity. At the highest concentrations of P(Mg(MTFSI) 2 ), the blends undergo microphase separation and generate nanostructures with shortranged ordering. In contrast, calcium ions, which are more readily solvated by PEO, produce more homogeneous blends characterized by a single glass-transition temperature and featureless SAXS data. The results demonstrate the novel experimental confirmation that charged-neutral polymer blends can undergo microphase separation and show that counterion identity can be exploited as a design parameter to control nanoscale morphology.

Ions↗
DOE OSTI2020

Enhanced Binding of SARS-CoV-2 Spike Protein to Receptor by Distal Polybasic Cleavage Sites

The receptor-binding domain (RBD) of the SARS-CoV-2 spike protein plays a crucial role in binding the human cell receptor ACE2 that is required for viral entry. Many studies have been conducted to target the structures of RBD–ACE2 binding and to design RBD-targeting vaccines and drugs. Nevertheless, mutations distal from the SARS-CoV-2 RBD also impact its transmissibility and antibody can target non-RBD regions, suggesting the incomplete role of the RBD region in the spike protein–ACE2 binding. Here, in order to elucidate distant binding mechanisms, we analyze complexes of ACE2 with the wild-type spike protein and with key mutants via large-scale all-atom explicit solvent molecular dynamics simulations. We find that though distributed approximately 10 nm away from the RBD, the SARS-CoV-2 polybasic cleavage sites enhance, via electrostatic interactions and hydration, the RBD–ACE2 binding affinity. A negatively charged tetrapeptide (GluGluLeuGlu) is then designed to neutralize the positively charged arginine on the polybasic cleavage sites. We find that the tetrapeptide GluGluLeuGlu binds to one of the three polybasic cleavage sites of the SARS-CoV-2 spike protein lessening by 34% the RBD–ACE2 binding strength. This significant binding energy reduction demonstrates the feasibility to neutralize RBD–ACE2 binding by targeting this specific polybasic cleavage site. Our work enhances understanding of the binding mechanism of SARS-CoV-2 to ACE2, which may aid the design of therapeutics for COVID-19 infection.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Gating Single Molecules with Counterions

We report atomic-scale gating and visualization of local charge distribution within individual rare-earth-based molecular complexes on a metallic surface. The complexes are formed by a positively charged lanthanum ion coordinated to a (pcam)3 molecule and a negatively charged counterion trapped underneath via electrostatic interactions on a Au(111) surface. Local gating is performed by adding an additional negatively charged counterion to one side of the complex, which results in the redistribution of charges within the complex and a positive shift of the frontier orbitals. This is caused by the internal Stark effect induced by the added counterion. This effect is directly captured using tunneling spectroscopy and spectroscopic mapping at 5 K substrate temperature. The polarizability of the complex is corroborated by density functional theory and analytical calculations based on experimental findings. Furthermore, the influence of charge polarization on nearby complexes is investigated in a cluster purposely assembled using three complexes, which reveals maintaining the charge states as in single complexes. These findings will enable the design of robust charged rare-earth complexes to be tailored for potential solid-state applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Selective Photodimerization in a Cyclodextrin Metal–Organic Framework

For the most part, enzymes contain one active site wherein they catalyze in a serial manner chemical reactions between substrates both efficiently and rapidly. Imagine if a situation could be created within a chiral porous crystal containing trillions of active sites where substrates can reside in vast numbers before being converted in parallel into products. Here, we report how it is possible to incorporate 1-anthracenecarboxylate (1-AC – ) as a substrate into a γ-cyclodextrin-containing metal–organic framework (CD-MOF-1), where the metals are K + cations, prior to carrying out [4+4] photodimerizations between pairs of substrate molecules, affording selectively one of four possible regioisomers. One of the high-yielding regioisomers exhibits optical activity as a result of the presence of an 8:1 ratio of the two enantiomers following separation by high-performance liquid chromatography. The solid-state superstructure of 1-anthracenecarboxylate potassium salt (1-ACK), which is co-crystallized with γ-cyclodextrin, reveals that pairs of substrate molecules are not only packed inside tunnels between spherical cavities present in CD-MOF-1, but also stabilized—in addition to hydrogen-bonding to the C-2 and C-3 hydroxyl groups on the d-glucopyranosyl residues present in the γ-cyclodextrin tori—by combinations of hydrophobic and electrostatic interactions between the carboxyl groups in 1-AC– and four K + cations on the waistline between the two γ-cyclodextrin tori in the tunnels. Here, these non-covalent bonding interactions result in preferred co-conformations that account for the highly regio- and enantioselective [4+4] cycloaddition during photoirradiation. Theoretical calculations, in conjunction with crystallography, support the regio- and stereochemical outcome of the photodimerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ethanol-Induced Condensation and Decondensation in DNA-Linked Nanoparticles: A Nucleosome-like Model for the Condensed State

Inspired by the conventional use of ethanol to induce DNA precipitation, ethanol condensation has been applied as a routine method to dynamically tune “bond” lengths (i.e., the surface-to-surface distances between adjacent nanoparticles that are linked by DNA) and thermal stabilities of colloidal crystals involving DNA-linked nanoparticles. However, the underlying mechanism of how the DNA bond that links gold nanoparticles changes in this class of colloidal crystals in response to ethanol remains unclear. Here, we conducted a series of all-atom molecular dynamic (MD) simulations to explore the free energy landscape for DNA condensation and decondensation. Our simulations confirm that DNA condensation is energetically much more favorable under 80% ethanol conditions than in pure water, as a result of ethanol’s role in enhancing electrostatic interactions between oppositely charged species. Moreover, the condensed DNA adopts B-form in pure water and A-form in 80% ethanol, which indicates that the higher-order transition does not affect DNA’s conformational preferences. We further propose a nucleosome-like supercoiled model for the DNA condensed state, and we show that the DNA end-to-end distance derived from this model matches the experimentally measured DNA bond length of about 3 nm in the fully condensed state for DNA where the measured length is 16 nm in water. Altogether, this study provides an atomistic understanding of the mechanism underlying ethanol-induced condensation and water-induced decondensation, while our proposed nucleosome-like model allows the design of new strategies for interpreting experimental studies of DNA condensation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reversible Emulsions from Polyoxometalate–Polymer: A Robust Strategy to Cyclic Emulsion Catalysis and High-Internal-Phase Emulsion Materials

Reversible Pickering emulsions, achieved by switchable, interfacially active colloidal particles, that enable on-demand emulsification/demulsification or phase inversion, hold substantial promise for biphasic catalysis, emulsion polymerization, cutting fluids, and crude oil pipeline transportation. However, particles with such a responsive behavior usually require complex chemical syntheses and surface modifications, limiting their extensive use. Herein, we report a simple route to generate emulsions that can be controlled and reversibly undergo phase inversion. The emulsions are prepared and stabilized by the interfacial assembly of polyoxometalate (POM)–polymer, where their electrostatic interaction at the interface is dynamic. The wettability of the POMs that dictates the emulsion type can be readily regulated by tuning the number of polymer chains bound to POMs, which, in turn, can be controlled by varying the concentrations of both components and the water/oil ratio. In addition, the number of polymer chains anchored to the POMs can be varied by controlling the number of negative charges on the POMs through an in situ redox reaction. As such, a reversible inversion of the emulsions can be triggered by switching between exposure to ultraviolet light and the introduction of oxygen. Combining the functions of POM itself, a cyclic interfacial catalysis system was realized. Inversion of the emulsion also affords a pathway to high-internal-phase emulsions. Finally, the diversity of the POMs, the polymers, and the responsive switching groups open numerous new, simple strategies for designing a wide range of responsive soft matter for cargo loading, controlled release, and delivery in biomedical and engineering applications without time-consuming particle syntheses.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Anionic Lipids Regulate the Light-Harvesting Complex 1-Reaction Center Photocycle in Purple Bacteria

Photosynthetic purple bacteria can capture and convert sunlight with a remarkable, nearly 100% quantum efficiency. The light-harvesting complex 1-reaction center (LH1-RC) core complex is the membrane complex fundamentally responsible for solar energy conversion. LH1-RC has a highly conserved surrounding lipid composition known to favor anionic lipids for an unknown function. Here, in this work, we compared experimentally the rate of LH1-to-RC energy transfer in detergent, membrane nanodiscs with varying lipid compositions, purified membrane fragments, and live cells. The energy transfer rate indicated that RC turnover decreased in neutral lipids, yet was partially restored in anionic lipids, revealing an unexpected lipid dependence. In complementary molecular dynamics simulations, the anionic lipid cardiolipin showed electrostatic interactions with LH1-RC that may mediate quinone exchange, providing a mechanism for the observed lipid dependence. Overall, these results revealed that anionic lipids facilitate LH1-RC redox cycling, identifying a functional role for membrane composition in photosynthetic solar energy conversion.

bacteria↗
DOE OSTI2026

Substrate-Directed Dimensional and Phase Control of Peptide Assemblies on Two-Dimensional van der Waals Materials

Understanding and controlling biomolecular self-assembly on van der Waals (vdW) materials has the potential to advance hybrid bioelectronic devices by enabling precise tuning of the interface and modulation of the resulting electronic properties of the biomolecule-vdW heterostructure. However, how surface properties of vdW materials direct biomolecule assembly remains poorly understood. To fill this knowledge gap, we investigated the assembly of a peptide known to assemble into two-dimensional (2D) crystalline films on MoS 2 on three representative vdW surfaces: WS 2 , MoS 2 , and highly oriented pyrolytic graphite (HOPG). Using in situ atomic force microscopy (AFM), we find that assembly is substrate-dependent, resulting in multilayers on WS 2 , monolayers on MoS 2 , and multiple coexisting phases on HOPG. WS 2 exhibits a higher negative charge, strong long-range electrostatic interactions, and extensive hydration layering that may promote multilayer stacking. In contrast, MoS 2 has stronger short-range interactions with the peptides but much weaker long-range interactions and hydration structure, which may favor monolayer formation. Molecular dynamics simulations predict a corresponding switch from monolayer to multilayer aggregates of the adsorbed monomers, reflected in their relative mobilities. On hydrophobic HOPG, the peptides bind most strongly and remain as monomers with high surface mobility. The peptide dimers comprising the basic unit of the crystals are more compact on HOPG, which has a smaller lattice constant than WS 2 or MoS 2 , suggesting strain contributes to stabilizing multiple phases. Our results provide mechanistic insights into how surface charge and hydration structure, and the lattice structure of the substrates governs peptide assembly on vdW materials, offering a framework to rationally control the 2D peptide-vdW heterostructures.

Molecular dynamics simulations↗
DOE OSTI2026

Quantifying Outer- and Inner-Coordination Sphere Effects Using Uranium Redox Chemistry in Molten Salt Solutions

Defining the relative influence of intramolecular and intermolecular forces is a fundamental problem in chemistry that is difficult to quantify. To address this challenge, we developed a method to evaluate the relative impact of direct chemical bonding in the inner-coordination sphere vs effects from cations in the outer-coordination sphere by comparative analysis of uranium redox reactivity in various molten salts. We observed that outer-coordination sphere cations (M 1+ ) and inner-coordination sphere anions (X 1– ) both affected uranium redox reactivity, with more polarizing M 1+ and larger X 1– favoring uranium in low oxidation states. Changing M 1+ (Li, Na, K) shifted the U IV + e 1– ⇌ U III (U IV/III ) and U III + 3e 1– → U 0 metal potentials by +330 and +240 mV, respectively. Changing X 1– (Cl, Br, I) caused larger shifts of +440 mV for the U IV/III redox potential and +1060 mV for the U 0 metal deposition potential. Using Coulomb’s Law, we correlated these potentials with electrostatic interactions between UIII and the molten salt. This model provided a facile way of predicting redox chemistry within molten salts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

A Crystalline Polyimide Porous Organic Framework for Selective Adsorption of Acetylene over Ethylene

The separation of acetylene from ethylene is a crucial process in the petrochemical industry, as even small acetylene impurities can lead to premature termination of ethylene polymerization. Herein, we present the synthesis of a robust, crystalline naphthalene diimide porous aromatic framework via imidization of linear naphthalene-1,4,5,8-tetracarboxylic dianhydride and triangular tris(4-aminophenyl)amine. The resulting material, PAF-110, exhibits impressive thermal and long-term structural stability, as indicated by thermogravimetric analysis and powder X-ray diffraction characterization. Gas adsorption characterization reveals that PAF-110 has a capacity for acetylene that is more than twice its ethylene capacity at 273 K and 1 bar, and it exhibits a moderate acetylene selectivity of 3.9 at 298 K and 1 bar. Complementary computational investigation of each guest binding in PAF-110 suggests that this affinity and selectivity for acetylene arises from its stronger electrostatic interaction with the carbonyl oxygen atoms of the framework. As a result, to the best of our knowledge, PAF-110 is the first crystalline porous organic material to exhibit selective adsorption of acetylene over ethylene, and its properties may provide insight into the further optimized design of porous organic materials for this key gas separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗