Search NASA⌕ Search

SEARCH · Search NASA

Results for “enhancing science”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Optics-on-a-chip for ultrafast manipulation of 350-MHz hard x-ray pulses

Microelectromechanical systems (MEMS) are miniature devices integrated into a vast range of industrial and consumer applications. Optical MEMS are developed for dynamic spatiotemporal control in lightwave manipulation and communication as modulators, switches, multiplexers, spectrometer, etc. However, they have not been shown to function similarly in sub-nm wavelength regimes, namely, with hard x-rays, as high-brilliance pulsed x-rays have proven powerful for addressing challenges in time-domain science, from energy conversion to neurobiological control. While desirable temporal properties of x-ray pulses can be enhanced by optics, conventional x-ray optics are inherently massive in size, hence, never dynamic. We demonstrate highly ultrafast x-ray optics-on-a-chip based on MEMS capable of modulating hard x-ray pulses exceeding 350 MHz, 10 3 × higher than any other mechanical modulator, with a pulse purity >10 6 without compromising the spectral brilliance. Moreover, the timing characteristics of the devices can be tuned on-the-fly to deliver optimal pulse properties to create a host of dynamic x-ray instruments and applications, impossible with traditional optics of 10 9 × bulkier and more massive. The advent of the ultrafast optics-on-a-chip heralds a new paradigm of x-ray photonics, time-domain science, and accelerator diagnostics, especially at not only the future-generation light sources that offer coherent and high-frequency pulses but also lab-based facilities that normally do not offer timing structures.

42 ENGINEERING↗

The DUNE Science Program

The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the previous European Strategy for Particle Physics. The construction of DUNE Phase I is well underway. DUNE Phase II consists of a third and fourth far detector module, an upgraded near detector complex, and an enhanced > 2 MW beam. The fourth FD module is conceived as a 'Module of Opportunity', aimed at supporting the core DUNE science program while also expanding the physics opportunities with more advanced technologies. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Neutrinos and cosmic messengers', 'BSM physics' and 'Dark matter and dark sector' streams focuses on the physics program of DUNE. Additional inputs related to DUNE detector technologies and R&D, DUNE software and computing, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The DUNE Phase II Detectors

The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy for the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the previous European Strategy for Particle Physics. The construction of DUNE Phase I is well underway. DUNE Phase II consists of a third and fourth far detector module, an upgraded near detector complex, and an enhanced > 2 MW beam. The fourth FD module is conceived as a 'Module of Opportunity', aimed at supporting the core DUNE science program while also expanding the physics opportunities with more advanced technologies. The DUNE collaboration is submitting four main contributions to the 2026 Update of the European Strategy for Particle Physics process. This submission to the 'Detector instrumentation' stream focuses on technologies and R&D for the DUNE Phase II detectors. Additional inputs related to the DUNE science program, DUNE software and computing, and European contributions to Fermilab accelerator upgrades and facilities for the DUNE experiment, are also being submitted to other streams.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Intron-mediated enhancement of DIACYLGLYCEROL ACYLTRANSFERASE1 expression in energycane promotes a step change for lipid accumulation in vegetative tissues

Abstract Background Metabolic engineering for hyperaccumulation of lipids in vegetative tissues is a novel strategy for enhancing energy density and biofuel production from biomass crops. Energycane is a prime feedstock for this approach due to its high biomass production and resilience under marginal conditions. DIACYLGLYCEROL ACYLTRANSFERASE ( DGAT ) catalyzes the last and only committed step in the biosynthesis of triacylglycerol (TAG) and can be a rate-limiting enzyme for the production of TAG. Results In this study, we explored the effect of intron-mediated enhancement (IME) on the expression of DGAT 1 and resulting accumulation of TAG and total fatty acid (TFA) in leaf and stem tissues of energycane. To maximize lipid accumulation these evaluations were carried out by co-expressing the lipogenic transcription factor WRINKLED 1 ( WRI 1) and the TAG protect factor oleosin ( OLE 1). Including an intron in the codon-optimized TmDGAT 1 elevated the accumulation of its transcript in leaves by seven times on average based on 5 transgenic lines for each construct. Plants with WRI 1 (W), DGAT 1 with intron (Di), and OLE 1 (O) expression (WDiO) accumulated TAG up to a 3.85% of leaf dry weight (DW), a 192-fold increase compared to non-modified energycane (WT) and a 3.8-fold increase compared to the highest accumulation under the intron-less gene combination (WDO). This corresponded to TFA accumulation of up to 8.4% of leaf dry weight, a 2.8-fold or 6.1-fold increase compared to WDO or WT, respectively. Co-expression of WDiO resulted in stem accumulations of TAG up to 1.14% of DW or TFA up to 2.08% of DW that exceeded WT by 57-fold or 12-fold and WDO more than twofold, respectively. Constitutive expression of these lipogenic “push pull and protect” factors correlated with biomass reduction. Conclusions Intron-mediated enhancement (IME) of the expression of DGAT resulted in a step change in lipid accumulation of energycane and confirmed that under our experimental conditions it is rate limiting for lipid accumulation. IME should be applied to other lipogenic factors and metabolic engineering strategies. The findings from this study may be valuable in developing a high biomass feedstock for commercial production of lipids and advanced biofuels. Graphical abstract

59 BASIC BIOLOGICAL SCIENCES↗

Ultrafast Early Warning of Heart Attacks through Plasmon‐Enhanced Raman Spectroscopy using Collapsible Nanofingers and Machine Learning

Abstract As the leading cause of death, heart attacks result in millions of deaths annually, with no end in sight. Early intervention is the only strategy for rescuing lives threatened by heart disease. However, the detection time of the fastest heart‐attack detection system is >15 min, which is too long considering the rapid passage of life. In this study, a machine learning (ML)‐driven system with a simple process, low‐cost, short detection time (only 10 s), and high precision is developed. By utilizing a functionalized nanofinger structure, even a trace amount of biomarker leaked before a heart attack can be captured. Additionally, enhanced Raman profiles are constructed for predictive analytics. Five ML models are developed to harness the useful characteristics of each Raman spectrum and provide early warnings of heart attacks with >98% accuracy. Through the strategic combination of nanofingers and ML algorithms, the proposed warning system accurately provides alerts on silent heart‐attack attempts seconds ahead of actual attacks.

60 APPLIED LIFE SCIENCES↗

Strain-stabilized superconductivity

Superconductivity is among the most fascinating and well-studied quantum states of matter. Despite over 100 years of research, a detailed understanding of how features of the normal-state electronic structure determine superconducting properties has remained elusive. For instance, the ability to deterministically enhance the superconducting transition temperature by design, rather than by serendipity, has been a long sought-after goal in condensed matter physics and materials science, but achieving this objective may require new tools, techniques and approaches. Here, we report the transmutation of a normal metal into a superconductor through the application of epitaxial strain. We demonstrate that synthesizing RuO 2 thin films on (110)-oriented TiO 2 substrates enhances the density of states near the Fermi level, which stabilizes superconductivity under strain, and suggests that a promising strategy to create new transition-metal superconductors is to apply judiciously chosen anisotropic strains that redistribute carriers within the low-energy manifold of d orbitals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laboratory Directed Research & Development: FY23 Annual Report

Sandia is a federally funded research and development center (FFRDC) focused on developing and applying advanced science and engineering capabilities to mitigate national security threats. This is accomplished through the exceptional staff leading research at the Labs and partnering with universities and companies. Sandia’s LDRD program aims to maintain the scientific and technical vitality of the Labs and to enhance the Labs’ ability to address future national security needs. The program funds foundational, leading-edge discretionary research projects that cultivate and utilize core science, technology, and engineering (ST&E) capabilities. Per Congressional intent (P.L. 101-510) and Department of Energy (DOE) guidance (DOE Order 413.2C, Chg 1), Sandia’s LDRD program is crucial to maintaining the nation’s scientific and technical vitality

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Laboratory Directed Research & Development: FY22 Annual Report

Sandia is a federally funded research and development center (FFRDC) focused on developing and applying advanced science and engineering capabilities to mitigate national security threats. This is accomplished through the exceptional staff leading research at the Labs and partnering with universities and companies. Sandia’s LDRD program aims to maintain the scientific and technical vitality of the Labs and to enhance the Labs’ ability to address future national security needs. The program funds foundational, leading-edge discretionary research projects that cultivate and utilize core science, technology, and engineering (ST&E) capabilities. Per Congressional intent (P.L. 101-510) and Department of Energy (DOE) guidance (DOE Order 413.2C, Chg 1), Sandia’s LDRD program is crucial to maintaining the nation’s scientific and technical vitality.

99 GENERAL AND MISCELLANEOUS↗

RESEARCH Laboratory Directed Research & Development FY24 Annual Report

Sandia is a federally funded research and development center (FFRDC) focused on developing and applying advanced science and engineering capabilities to mitigate national security threats. This is accomplished through the exceptional staff leading research at the Labs and partnering with universities and companies. Sandia’s LDRD program aims to maintain the scientific and technical vitality of the Labs and to enhance the Labs’ ability to address future national security needs. The program funds foundational, leading-edge discretionary research projects that cultivate and utilize core science, technology, and engineering (ST&E) capabilities. Per Congressional intent (P.L. 101-510) and Department of Energy (DOE) guidance (DOE Order 413.2C, Chg 1), Sandia’s LDRD program is crucial to maintaining the nation’s scientific and technical vitality.

99 GENERAL AND MISCELLANEOUS↗

Capillary-Enhanced Two-Phase Micro-Cooler Using Copper-Inverse-Opal Wick with Silicon Microchannel Manifold for High-Heat-Flux Cooling Application

In this work, we demonstrate a two-phase capillary-fed boiling micro-cooler that consists of a ~ 25-..mu..m-thick copper inverse opal (CIO) porous wicking structure for high-heat-flux boiling and a silicon 3D-manifold for distributed liquid delivery and vapor extraction across a 0.5 cm x 0.5 cm heated area. At low inlet water mass flow rates of 1.5 to 1.9 g(min)-1, the micro-cooler displays nearly two-phase boiling with exit vapor quality ~ 1 and a high critical heat flux (CHF) of 253 to 320 W cm-2 with low superheat of ~ 10 degrees C resulting in a thermal resistance of boiling ~ 0.025 cm2 degrees C W-1 or heat transfer coefficient of 0.4 MW m-2 degrees C-1. For higher flow rates of 5, 10, and 15 g(min)-1, the micro-cooler exhibits a hybrid single-phase and two-phase cooling regime where the contribution of the sensible heat (single-phase) cooling is linearly added to that of the two-phase cooling. For the highest flow rate of 15 g(min)-1, the CHF is increased to ~ 500 W cm-2 resulting in an overall thermal resistance of ~ 0.18 cm2 degrees C W-1. However, the two-phase heat transfer effectiveness, which estimates the utilization level of the inlet mass flow rate for two-phase boiling, is reduced to ~ 0.11. To achieve the best cooling system performances, the micro-cooler must operate entirely within the two-phase boiling regime (exit vapor quality or two-phase heat transfer effectiveness ~ 1). Ideally, the "coolant" should be delivered near its saturation temperature (~ 100 degrees C for water), which provides significant advantages for the energy-efficient operation of data centers and power electronics. We present detailed analysis with Infrared and high speed camera images at various inlet flow rates and heat fluxes to understand complex heat transfer in the micro-cooler. Furthermore, a conjugate thermofluidic simulation model, which incorporates the physics of capillary-fed boiling in a porous copper layer, agrees well with the experimental data.

capillary-enhanced boiling↗

AI Driven Optimization of Public Transit

This project explores the application of AI-driven methods to optimize public transit operations for the Chattanooga Area Regional Transportation Authority (CARTA). By leveraging data analytics, machine learning, and predictive modeling, the initiative seeks to enhance system efficiency, improve rider experience, and support sustainability goals. This research, supported by the National Science Foundation and the U.S. Department of Energy, integrates real-time transit data with advanced computational tools to inform decision-making, optimize routes, and balance operational demands. The work exemplifies a forward-looking model for mid-sized cities aiming to modernize mobility systems through intelligent technology integration.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

WHONDRS-GUI: a web application for global survey of surface water metabolites

Background The Worldwide Hydrobiogeochemistry Observation Network for Dynamic River Systems (WHONDRS) is a consortium that aims to understand complex hydrologic, biogeochemical, and microbial connections within river corridors experiencing perturbations such as dam operations, floods, and droughts. For one ongoing WHONDRS sampling campaign, surface water metabolite and microbiome samples are collected through a global survey to generate knowledge across diverse river corridors. Metabolomics analysis and a suite of geochemical analyses have been performed for collected samples through the Environmental Molecular Sciences Laboratory (EMSL). The obtained knowledge and data package inform mechanistic and data-driven models to enhance predictions of outcomes of hydrologic perturbations and watershed function, one of the most critical components in model-data integration. To support efforts of the multi-domain integration and make the ever-growing data package more accessible for researchers across the world, a Shiny/R Graphical User Interface (GUI) called WHONDRS-GUI was created. Results The web application can be run on any modern web browser without any programming or operational system requirements, thus providing an open, well-structured, discoverable dataset for WHONDRS. Together with a context-aware dynamic user interface, the WHONDRS-GUI has functionality for searching, compiling, integrating, visualizing and exporting different data types that can easily be used by the community. The web application and data package are available at https://data.ess-dive.lbl.gov/view/doi:10.15485/1484811 , which enables users to simultaneously obtain access to the data and code and to subsequently run the web app locally. The WHONDRS-GUI is also available for online use at Shiny Server ( https://xmlin.shinyapps.io/whondrs/ ).

59 BASIC BIOLOGICAL SCIENCES↗

DUNE Phase II: scientific opportunities, detector concepts, technological solutions

The international collaboration designing and constructing the Deep Underground Neutrino Experiment (DUNE) at the Long-Baseline Neutrino Facility (LBNF) has developed a two-phase strategy toward the implementation of this leading-edge, large-scale science project. The 2023 report of the US Particle Physics Project Prioritization Panel (P5) reaffirmed this vision and strongly endorsed DUNE Phase I and Phase II, as did the European Strategy for Particle Physics. While the construction of the DUNE Phase I is well underway, this White Paper focuses on DUNE Phase II planning. DUNE Phase-II consists of a third and fourth far detector (FD) module, an upgraded near detector complex, and an enhanced 2.1 MW beam. The fourth FD module is conceived as a “Module of Opportunity”, aimed at expanding the physics opportunities, in addition to supporting the core DUNE science program, with more advanced technologies. This document highlights the increased science opportunities offered by the DUNE Phase II near and far detectors, including long-baseline neutrino oscillation physics, neutrino astrophysics, and physics beyond the standard model. It describes the DUNE Phase II near and far detector technologies and detector design concepts that are currently under consideration. A summary of key R&D goals and prototyping phases needed to realize the Phase II detector technical designs is also provided. DUNE's Phase II detectors, along with the increased beam power, will complete the full scope of DUNE, enabling a multi-decadal program of groundbreaking science with neutrinos.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enhanced polymorph metastability drives glycine nucleation in aqueous salt solutions

Crystal nucleation from aqueous solutions influences countless geological, biochemical, astrophysical, environmental, and materials science–related phenomena, including ice formation, the manufacturing of active pharmaceutical ingredients, development of diseases such as Alzheimer’s and the origin of life itself. Understanding and controlling nucleation is essential for designing materials with specific properties, developing strategies to inhibit or promote crystallization in various contexts and preventing pathological aggregation in neurodegenerative diseases. Similar to the protein structure prediction problem—where a single amino acid sequence can in theory adopt one most stable conformation but in practice may sample multiple competing conformations—crystal nucleation faces a parallel challenge: the same chemical species can form diverse polymorphs under different environmental conditions (e.g., temperature, pressure, solvent). Each polymorph presents its own set of physical and chemical properties, highlighting the importance of understanding and controlling polymorph selection in fields ranging from pharmaceuticals to materials design. Despite advances in experimental and computational methods for studying phase transitions and polymorph stability, nucleation remains challenging due to its nanoscale nature. Furthermore, in practical settings, salts and impurities can further influence crystal nucleation in diverse contexts, from scaling in pipelines and desalination plants to the durability of concrete and the efficiency of battery materials. This can lead to the formation of polymorphs that may differ from the most stable phase in pure solutions. Or, even though the final structure might appear same irrespective of whether the environment contained impurities or not, the mechanism through which it was formed might be completely different and not intuitive.

Wang, Ruiyu [University of Maryland, College Park,↗

Basic Research Needs for Inverse Methods for Complex Systems under Uncertainty

Inverse problems, which aim to infer unknown properties of a system using experimental and observational data, are central to addressing many of the U.S. Department of Energy’s (DOE) most critical scientific and engineering challenges. Accurate, computationally efficient, and data-efficient solutions to inverse problems are essential for advancing DOE mission-critical science drivers, including analyzing data from large-scale experimental facilities, optimizing fusion reactor performance, accelerating materials discovery, enhancing geophysical imaging, improving wildfire predictions, and enabling autonomous systems and digital twins. However, these problems are becoming increasingly complex, often involving nonlinear, highdimensional, and interconnected systems and models that span multiple physics and scales, while relying on data with varying quantity, quality, and information content. Compounding these challenges is the uncertainty inherent in DOE-relevant systems, where errors in inputs, noise in data, incompleteness of data, and discrepancies between models and reality constrain the accuracy and precision of solutions. At the same time, the convergence of recent scientific computing trends—scientific machine learning, artificial intelligence, and computing advances such as exascale computing—is creating unprecedented opportunities for tackling these challenges. The cross-cutting nature of inverse problems, combined with their growing complexity and rapidly evolving data and algorithmic demands, strongly motivates the formulation of a prioritized research agenda to maximize their capabilities and impact. In response to this need, DOE’s Advanced Scientific Computing Research (ASCR) program in the Office of Science convened the Workshop on Basic Research Needs for Inverse Problems for Complex Systems Under Uncertainty in June 2025. This workshop brought together experts across disciplines to identify grand challenges and major opportunities in the field. Through collaborative discussions, the workshop defined transformative research directions aimed at addressing the mathematical, statistical, and computational challenges posed by inverse problems under uncertainty. As a result of these efforts, four priority research directions (PRDs) were identified to guide future research and development in this area. These PRDs, summarized below, represent a roadmap for advancing the foundational science and mathematics of inverse problems, enabling robust, scalable, and uncertainty-aware solutions that are critical for DOE applications.

97 MATHEMATICS AND COMPUTING↗

Bandgap engineering of Cd 1 - x Zn x Te 1 - y Se y ( 0 < x < 0 . 27 , 0 < y < 0 . 026 )

CdZnTe (CZT) detectors with more than 10% zinc content did not show a remarkable improvement in the detector performance due to the additional defects introduced by the higher zinc content. However, recent research showed that the formation of defects was suppressed effectively by adding a small amount of selenium (2%) in CZT. On this basis, we attempted to enhance the detector performance through bandgap engineering by increasing the zinc content up to 25 %, while adding 2 % of selenium. Multiple CdZnTeSe (CZTS) ingots with Zn = 10, 12.5, 15, 20 and 25%, while fixing the Se composition at 2%, were grown by the Bridgman method. The bandgap of CZTS for the different Zn and Se contents was analyzed and then equations for predicting the bandgap for other alloy compositions were introduced. Furthermore, the crystallinity of CZTS was evaluated by photoluminescence measurements. The pulse height spectra for Am-241 and Co-57 sources were used to evaluate the detector performance for the CZTS samples.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Methods to Activate and Elucidate Complex Endogenous Sugar Metabolism in Yarrowia lipolytica

Yarrowia lipolytica has endogenous metabolism to use complex sugars derived from lignocellulosic biomass. However, many of these pathways are cryptic and hence either inactive or inefficient for xylose, arabinose, and cellobiose assimilation. Furthermore, we present collective methods to activate and elucidate these endogenous sugar pathways by performing short-term growth adaptation, determining the pathway efficiency, and conducting transcriptomic, enzymatic, and metabolic analyses to identify rate limiting steps for enhanced sugar consumption.

59 BASIC BIOLOGICAL SCIENCES↗