Search NASA⌕ Search

SEARCH · Search NASA

Results for “factor analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Application of peaking factor credit in spent fuel pool criticality analysis

Higher moderator temperature (lower density) and higher fuel temperatures used in the depletion analysis of spent fuel increases the reactivity. Modern criticality analyses for spent fuel pools typically determine the highest power assembly and use the temperatures from this high power assembly. The high power assembly is determined by finding the maximum assembly averaged relative power or peaking factor. For the depletion analysis it is appropriate to use the average peaking factor over the life of the assembly. This can be determined by dividing the assembly burnup by the sum of the core cycle burnups for the cycles the assembly was in the core. A bounding assembly averaged peaking factor is typically about 1.4. Clearly this is 40% higher than the average assembly power. The reactivity limiting fuel assembly generally has low burnup and thus a low peaking factor. Rather than assume a limiting peaking factor to determine the temperatures in the depletion analysis, the depletion analysis can be performed multiple times with different temperature sets so the depleted isotopic content is a function of the peaking factor. This would allow more fuel assemblies to satisfy the loading criteria while maintaining the same criticality margin. The peaking factor credit can be about 2% in k or about 3.5 GWd/MTU change in the burnup requirements. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Molecular Genetic Analysis of Activation-tagged Transcription Factors Thought to be Involved in Photomorphogenesis

Plants utilize light as a source of information via families of photoreceptors such as the red/far-red absorbing phytochromes (PHY) and the blue/UVA absorbing cryptochromes (CRY). The main goal of the Neff lab is to use molecular-genetic mutant screens to elucidate signaling components downstream of these photoreceptors. Activation-tagging mutagenesis led to the identification of two putative transcription factors that may be involved in both photomorphogenesis and hormone signaling pathways. sob1-D (suppressor of phyB-dominant) mutant phenotypes are caused by the over-expression of a Dof transcription factor previously named OBP3. Our previous studies indicate that OBP3 is a negative regulator of light-mediated cotyledon expansion and may be involved in modulating responsiveness to the growth-regulating hormone auxin. The sob2-D mutant uncovers a role for LEP, a putative AP2/EREBP-like transcription factor, in seed germination, hypocotyl elongation and responsiveness to the hormone abscisic acid. Based on photobiological and genetic analysis of OBP3-knockdown and LEP-null mutations, we hypothesize that these transcription factors are involved in both light-mediated seedling development and hormone signaling. To examine the role that these genes play in photomorphogenesis we will: 1) Further explore the genetic role of OBP3 in cotyledon/leaf expansion and other photomorphogenic processes as well as examine potential physical interactions between OBP3 and CRY1 or other signaling components that genetically interact with this transcription factor 2) Test the hypothesis that OBP3 is genetically involved in auxin signaling and root development as well as examine the affects of this hormone and light on OBP3 protein accumulation. 3) Test the hypothesis that LEP is involved in seed germination, seedling photomorphogenesis and hormone signaling. Together these experiments will lead to a greater understanding of the complexity of interactions between photoreceptors and DNA-interacting proteins during photomorphogenesis. These studies also address the roles OBP3 and LEP may play as points of intersection between hormone signaling and photomorphogenesis. In the future, phenotypes caused by altered expression of these genes may generate useful traits for improving crop yield.

59 BASIC BIOLOGICAL SCIENCES↗

On extraction of twist-two Compton form factors from DVCS observables through harmonic analysis

We investigate the exercise of locally extracting the real and imaginary parts of the four twist-2 Compton form factors (CFFs) {$\mathcal{H,E,\tilde H,\tilde E}$} which arise in the deeply virtual Compton scattering (DVCS) process e + p → e + p + y. Neglecting dynamical higher-twist contributions, we find that there are a sufficient number of DVCS observables and degrees of freedom to extract all 8 leading quantities model-independently, exploiting the azimuthal dependence of the absolute cross sections across all possible beam and target polarizations at a common kinematical point in {Q, t,x b , y}. As an example, for typical JLab lab-frame kinematics, we simplify the reduced DVCS observables to their dominant terms, providing a sufficient number of equations for local determination of the twist-2 CFFs. We demonstrate the feasibility using harmonic fitting to both cross sections and beam spin asymmetries with both real and pseudo-data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A Generalized Adjoint Approach for Quantifying Reflector Assembly Discontinuity Factor Uncertainties

Sensitivity-based uncertainty analysis of assembly discontinuity factors (ADFs) can be readily performed using adjoint methods for infinite lattice models. However, there is currently no adjoint-based methodology to obtain uncertainties for ADFs along an interface between a fuel and reflector region. To accommodate leakage effects in a reflector region, a 1D approximation is usually made in order to obtain the homogeneous interface flux required to calculate the ADF. Within this 1D framework an adjoint-based method is proposed that is capable of efficiently calculating ADF uncertainties. In the proposed method the sandwich rule is utilized to relate the covariance of the input parameters of 1D diffusion theory in the reflector region to the covariance of the interface ADFs. The input parameters covariance matrix can be readily obtained using sampling-based codes such as XSUSA or adjoint-based codes such as TSUNAMI. The sensitivity matrix is constructed using a fixed-source adjoint approach for inputs characterizing the reflector region. An analytic approach is then used to determine the sensitivity of the ADFs to fuel parameters using the neutron balance equation. A stochastic approach is used to validate the proposed adjoint-based method.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Ensemble refinement shows conformational flexibility in crystal structures of human complement factor D

Ensemble-refinement analysis of native and mutant factor D (FD) crystal structures indicates a dynamical transition in FD from a self-inhibited inactive conformation to a substrate-bound active conformation that is reminiscent of the allostery in thrombin. Comparison with previously observed dynamics in thrombin using NMR data supports the crystallographic ensembles. Human factor D (FD) is a self-inhibited thrombin-like serine proteinase that is critical for amplification of the complement immune response. FD is activated by its substrate through interactions outside the active site. The substrate-binding, or ‘exosite’, region displays a well defined and rigid conformation in FD. In contrast, remarkable flexibility is observed in thrombin and related proteinases, in which Na{sup +} and ligand binding is implied in allosteric regulation of enzymatic activity through protein dynamics. Here, ensemble refinement (ER) of FD and thrombin crystal structures is used to evaluate structure and dynamics simultaneously. A comparison with previously published NMR data for thrombin supports the ER analysis. The R202A FD variant has enhanced activity towards artificial peptides and simultaneously displays active and inactive conformations of the active site. ER revealed pronounced disorder in the exosite loops for this FD variant, reminiscent of thrombin in the absence of the stabilizing Na{sup +} ion. These data indicate that FD exhibits conformational dynamics like thrombin, but unlike in thrombin a mechanism has evolved in FD that locks the unbound native state into an ordered inactive conformation via the self-inhibitory loop. Thus, ensemble refinement of X-ray crystal structures may represent an approach alternative to spectroscopy to explore protein dynamics in atomic detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fast Grain Mapping with Sub-Nanometer Resolution Using 4D-STEM with Grain Classification by Principal Component Analysis and Non-Negative Matrix Factorization

High-throughput grain mapping with sub-nanometer spatial resolution is demonstrated using scanning nanobeam electron diffraction (also known as 4D scanning transmission electron microscopy, or 4D-STEM) combined with high-speed direct-electron detection. An electron probe size down to 0.5 nm in diameter is used and the sample investigated is a gold–palladium nanoparticle catalyst. Computational analysis of the 4D-STEM data sets is performed using a disk registration algorithm to identify the diffraction peaks followed by feature learning to map the individual grains. Two unsupervised feature learning techniques are compared: principal component analysis (PCA) and non-negative matrix factorization (NNMF). The characteristics of the PCA versus NNMF output are compared and the potential of the 4D-STEM approach for statistical analysis of grain orientations at high spatial resolution is discussed.

47 OTHER INSTRUMENTATION↗

Two planar polishing methods by using FIB technique: Toward ultimate top-down delayering for failure analysis

Presently two major limiting factors are hindering the failure analysis (FA) development during the semiconductor manufacturing process and technology improvement: (1) Impossibility of manual polishing on the edge dies due to the amenability of layer peeling off; (2) Abundant demand of multi-locations FA, especially focusing different levels of layers simultaneously. Aiming at resolving these limitations, here we demonstrate two unique high precision polishing methods by using focused ion beam (FIB) technique. One is the vertical top down chemical etching at the aimed location; the other one is the planar top down slicing. Using the FIB for delayering not only solves these problems mentioned above, but also offers significant advantages over physical planar polishing methods such as: (1) having a better control of the delayering progress, (2) enabling precisely milling at a region of interest, (3) providing the prevention of over-delayering and (4) possessing capability to capture images at the region of interest simultaneously and cut into the die directly to expose the exact failure without damaging other sections of the specimen.

36 MATERIALS SCIENCE↗

Transient analysis of the dynamic stress intensity factors using SGBEM for frequency-domain elastodynamics

In this paper, a two-dimensional symmetric-Galerkin boundary integral formulation for elastodynamic fracture analysis in the frequency domain is described. The numerical implementation is carried out with quadratic elements, allowing the use of an improved quarter-point element for accurately determining frequency responses of the dynamic stress intensity factors (DSIFs). To deal with singular and hypersingular integrals, the formulation is decomposed into two parts: the first part is identical to that for elastostatics while the second part contains at most logarithmic singularities. The treatment of the elastostatic singular and hypersingular singular integrals employs an exterior limit to the boundary, while the weakly singular integrals in the second part are handled by Gauss quadrature. Time histories (transient responses) of the DSIFs can be obtained in a post-processing step by applying the fast Fourier transform (FFT) and inverse FFT to the frequency responses of these DSIFs. Several test examples are presented for the calculation of the DSIFs due to two types of impact loading: Heaviside step loading and blast loading. The results suggest that the combination of symmetric-Galerkin and FFT algorithms in determining transient responses of the DSIFs is robust and effective.

36 MATERIALS SCIENCE↗

Clinical and Dosimetric Predictors of Radiation Pneumonitis in a Large Series of Patients Treated With Stereotactic Body Radiation Therapy to the Lung

Purpose: To report clinical and dosimetric factors predictive of radiation pneumonitis (RP) in patients receiving lung stereotactic body radiation therapy (SBRT) from a series of 240 patients. Methods and Materials: Of the 297 isocenters treating 263 patients, 240 patients (n=263 isocenters) had evaluable information regarding RP. Age, gender, current smoking status and pack-years, O{sub 2} use, Charlson Comorbidity Index, prior lung radiation therapy (yes/no), dose/fractionation, V{sub 5}, V{sub 13}, V{sub 20}, V{sub prescription}, mean lung dose, planning target volume (PTV), total lung volume, and PTV/lung volume ratio were recorded. Results: Twenty-nine patients (11.0%) developed symptomatic pneumonitis (26 grade 2, 3 grade 3). The mean V{sub 20} was 6.5% (range, 0.4%-20.2%), and the average mean lung dose was 5.03 Gy (0.547-12.2 Gy). In univariable analysis female gender (P=.0257) and Charlson Comorbidity index (P=.0366) were significantly predictive of RP. Among dosimetric parameters, V{sub 5} (P=.0186), V{sub 13} (P=.0438), and V{sub prescription} (where dose = 60 Gy) (P=.0128) were significant. There was only a trend toward significance for V{sub 20} (P=.0610). Planning target volume/normal lung volume ratio was highly significant (P=.0024). In multivariable analysis the clinical factors of female gender, pack-years smoking, and larger gross internal tumor volume and PTV were predictive (P=.0094, .0312, .0364, and .052, respectively), but no dosimetric factors were significant. Conclusions: Rate of symptomatic RP was 11%. Our mean lung dose was <600 cGy in most cases and V20 <10%. In univariable analysis, dosimetric factors were predictive, while tumor size (or tumor/lung volume ratio) played a role in multivariable and univariable and analysis, respectively.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Synthesis, structural and electrical characterizations of DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}}

A new compound DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}} has been prepared by sol gel method and annealed at 1473 K in 1 atm of Ar gas flow. The X-ray diffraction (XRD) is used for phase identification. The sample shows to adopt the K{sub 2}NiF{sub 4}-type structure based on tolerance factor calculation. XRD analysis using the Rietveld method was carried out and it was found that DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}} (Dy{sub 0.33}Sr{sub 1.67}Ni{sub 0.8}Cu{sub 0.2}O{sub 4-{delta}}') compound crystallizes in tetragonal symmetry with space group I4/mmm (Z=2). The lattice parameters are found to be at room temperature a=3.7696(5) A and c=12.3747(2) A. The final reliability indices were: R{sub B}=5.219% and {chi}{sup 2}=3.47. Four probe electrical resistivity measurements were performed versus temperature in the range 294-579 K. A semiconducting behaviour over the whole range of temperature, with a conductivity maximum of 0.4 S cm{sup -1} is observed at 510 K. - Graphical abstract: DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}} exhibits a semi-conducting behaviour over the whole temperature range 294-579 K with a conductivity maximum of 0.4 S cm{sup -1} at 510 K. Highlights: > We described our attempts to synthesize the pure compound DySr{sub 5}Ni{sub 2.4}Cu{sub 0.6}O{sub 12-{delta}}. > Product was characterized by XRD and electrical resistivity measurements. > Iodometric titration was used for the analysis of the oxygen nonstoichiometry. > Calculated tolerance factor was included in the tetragonal symmetry stability range. > Compound exhibits a semi-conducting behaviour over the whole temperature range 294-579 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dose-Response for Stereotactic Body Radiotherapy in Early-Stage Non-Small-Cell Lung Cancer

Purpose: To compare the efficacy of three lung stereotactic body radiotherapy (SBRT) regimens in a large institutional cohort. Methods: Between 2004 and 2009, 130 patients underwent definitive lung cancer SBRT to a single lesion at the Mallinckrodt Institute of Radiology. We delivered 18 Gy Multiplication-Sign 3 fractions for peripheral tumors (n = 111) and either 9 Gy Multiplication-Sign 5 fractions (n = 8) or 10 Gy Multiplication-Sign 5 fractions (n = 11) for tumors that were central or near critical structures. Univariate and multivariate analysis of prognostic factors was performed using the Cox proportional hazard model. Results: Median follow-up was 11, 16, and 13 months for the 9 Gy Multiplication-Sign 5, 10 Gy Multiplication-Sign 5, and 18 Gy Multiplication-Sign 3 groups, respectively. Local control statistics for Years 1 and 2 were, respectively, 75% and 50% for 9 Gy Multiplication-Sign 5, 100% and 100% for 10 Gy Multiplication-Sign 5, and 99% and 91% for 18 Gy Multiplication-Sign 3. Median overall survival was 14 months, not reached, and 34 months for the 9 Gy Multiplication-Sign 5, 10 Gy Multiplication-Sign 5, and 18 Gy Multiplication-Sign 3 treatments, respectively. No difference in local control or overall survival was found between the 10 Gy Multiplication-Sign 5 and 18 Gy Multiplication-Sign 3 groups on log-rank test, but both groups had improved local control and overall survival compared with 9 Gy Multiplication-Sign 5. Treatment with 9 Gy Multiplication-Sign 5 was the only independent prognostic factor for reduced local control on multivariate analysis, and increasing age, increasing tumor volume, and poor performance status predicted independently for reduced overall survival. Conclusion: Treatment regimens of 10 Gy Multiplication-Sign 5 and 18 Gy Multiplication-Sign 3 seem to be efficacious for lung cancer SBRT and provide superior local control and overall survival compared with 9 Gy Multiplication-Sign 5.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

The associations between environmental quality and preterm birth in the United States, 2000–2005: a cross-sectional analysis

Many environmental factors have been independently associated with preterm birth (PTB). However, exposure is not isolated to a single environmental factor, but rather to many positive and negative factors that co-occur. Furthermore, the environmental quality index (EQI), a measure of cumulative environmental exposure across all US counties from 2000—2005, was used to investigate associations between ambient environment and PTB.

54 ENVIRONMENTAL SCIENCES↗

Astronauts Plasma-Derived Exosomes Induced Aberrant EZH2-Mediated H3K27me3 Epigenetic Regulation of the Vitamin D Receptor

There are unique stressors in the spaceflight environment. Exposure to such stressors may be associated with adverse effects on astronauts' health, including increased cancer and cardiovascular disease risks. Small extracellular vesicles (sEVs, i.e., exosomes) play a vital role in intercellular communication and regulate various biological processes contributing to their role in disease pathogenesis. To assess whether spaceflight alters sEVs transcriptome profile, sEVs were isolated from the blood plasma of 3 astronauts at two different time points: 10 days before launch (L-10) and 3 days after return (R+3) from the Shuttle mission. AC16 cells (human cardiomyocyte cell line) were treated with L-10 and R+3 astronauts-derived exosomes for 24 h. Total RNA was isolated and analyzed for gene expression profiling using Affymetrix microarrays. Enrichment analysis was performed using Enrichr. Furthermore, transcription factor (TF) enrichment analysis using the ENCODE/ChEA Consensus TF database identified gene sets related to the polycomb repressive complex 2 (PRC2) and Vitamin D receptor (VDR) in AC16 cells treated with R+3 compared to cells treated with L-10 astronauts-derived exosomes. Further analysis of the histone modifications using datasets from the Roadmap Epigenomics Project confirmed enrichment in gene sets related to the H3K27me3 repressive mark. Interestingly, analysis of previously published H3K27me3–chromatin immunoprecipitation sequencing (ChIP-Seq) ENCODE datasets showed enrichment of H3K27me3 in the VDR promoter. Collectively, our results suggest that astronaut-derived sEVs may epigenetically repress the expression of the VDR in human adult cardiomyocytes by promoting the activation of the PRC2 complex and H3K27me3 levels.

59 BASIC BIOLOGICAL SCIENCES↗

NREL Suite of Tools for PV and Storage Analysis

Many different factors such as the solar resource, technology costs and incentives, utility cost and consumption, space available, and financial parameters impact the technical and economic potential of a PV project. NREL has developed techno-economic modeling tools that can be used to evaluate PV projects at a site.

24 POWER TRANSMISSION AND DISTRIBUTION↗

System and method for automated extraction of high resolution structural dynamics from video

A method for extracting vibrational modes of a structure includes: receiving a plurality of video frames, each of the video frames including a plurality of pixels; decomposing each of the video frames on a plurality of spatial scales in accordance with complex steerable pyramid filters to obtain a filter response for each of the spatial scales; computing a plurality of local phases of the pixels of each frame; removing a temporal mean from each frame to obtain a plurality of factored vibration motion functions; performing principal component analysis on the factored vibration motion functions to obtain principal components; blind source separating the principal components to compute a plurality of modal coordinates; computing frequency and damping ratios in accordance with the modal coordinates; and outputting the computed frequency and damping ratios.

42 ENGINEERING↗

Local Failure in Resected N1 Lung Cancer: Implications for Adjuvant Therapy

Purpose: To evaluate actuarial rates of local failure in patients with pathologic N1 non-small-cell lung cancer and to identify clinical and pathologic factors associated with an increased risk of local failure after resection. Methods and Materials: All patients who underwent surgery for non-small-cell lung cancer with pathologically confirmed N1 disease at Duke University Medical Center from 1995-2008 were identified. Patients receiving any preoperative therapy or postoperative radiotherapy or with positive surgical margins were excluded. Local failure was defined as disease recurrence within the ipsilateral hilum, mediastinum, or bronchial stump/staple line. Actuarial rates of local failure were calculated with the Kaplan-Meier method. A Cox multivariate analysis was used to identify factors independently associated with a higher risk of local recurrence. Results: Among 1,559 patients who underwent surgery during the time interval, 198 met the inclusion criteria. Of these patients, 50 (25%) received adjuvant chemotherapy. Actuarial (5-year) rates of local failure, distant failure, and overall survival were 40%, 55%, and 33%, respectively. On multivariate analysis, factors associated with an increased risk of local failure included a video-assisted thoracoscopic surgery approach (hazard ratio [HR], 2.5; p = 0.01), visceral pleural invasion (HR, 2.1; p = 0.04), and increasing number of positive N1 lymph nodes (HR, 1.3 per involved lymph node; p = 0.02). Chemotherapy was associated with a trend toward decreased risk of local failure that was not statistically significant (HR, 0.61; p = 0.2). Conclusions: Actuarial rates of local failure in pN1 disease are high. Further investigation of conformal postoperative radiotherapy may be warranted.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

What Factors Drive Air Pollutants in China? An Analysis from the Perspective of Regional Difference Using a Combined Method of Production Decomposition Analysis and Logarithmic Mean Divisia Index

Air pollution in China attracts the world’s attention, so it is important to study its driving factors for air pollutants. The combined Production Decomposition Analysis and Logarithmic Mean Divisia Index (PDA–LMDI) model is applied to construct a regional contribution index in this study to explore the regional differences in factors affecting sulfur dioxide (SO 2 ), nitrogen oxides (NO x ), and particulate matter with diameter not greater than 2.5 µm (PM 2.5 ) from 2005 to 2015 in China. The regional emission coefficient had a great inhibitory effect, which reduced SO 2 , NO x , and PM 2.5 by 25,364.9, 10,449.3, and 11,295.3 kilotons (kt) from 2005 to 2015, respectively. For this inhibitory effect, the degree to emission reduction was great for North and East China, followed by South and Central China, and small for Southwest. Northwest. and Northeast China. The regional technical efficiency, technology improvement, capital-energy substitution and labor-energy substitution effects each reduced SO 2 , NO x , and PM 2.5 by about 3500, 3100, and 1500 kt from 2005 to 2015, respectively. For the regional technical efficiency and technology improvement effects, the degree to emission reduction was great in East and Central China, and small in South Northwest and Northeast China. For the regional capital- and labor-energy substitution effects, the degree of emission reduction was great for North East and Central China, and small for Northwest and South China. The regional output proportion effect increased SO 2 , NO x , and PM 2.5 by 1211.2, 320.1, and 277.8 kt from 2005 to 2015, respectively. The national economic growth had a relatively great promoting effect and increased SO 2 , NO x , and PM 2.5 by 26,445.5, 23,827.5, and 11,925.5 kt from 2005 to 2015, respectively. Each region should formulate relevant policies and measures for emission reduction according to local conditions.

54 ENVIRONMENTAL SCIENCES↗

Safety of Repeated Yttrium-90 Radioembolization

Purpose: Repeated radioembolization (RE) treatments carry theoretically higher risk of radiation-induced hepatic injury because of the liver's cumulative memory of previous exposure. We performed a retrospective safety analysis on patients who underwent repeated RE. Methods: From 2004 to 2011, a total of 247 patients were treated by RE. Eight patients (5 men, 3 women, age range 51-71 years) underwent repeated treatment of a targeted territory, all with resin microspheres (SIR-Spheres; Sirtex, Lane Cove, Australia). Adverse events were graded during a standardized follow-up. In addition, the correlation between the occurrence of RE-induced liver disease (REILD) and multiple variables was investigated in univariate and multivariate analyses in all 247 patients who received RE. Results: Two patients died shortly after the second treatment (at 84 and 107 days) with signs and symptoms of REILD. Both patients underwent whole liver treatment twice (cumulative doses 3.08 and 2.66 GBq). The other 6 patients demonstrated only minor toxicities after receiving cumulative doses ranging from 2.41 to 3.88 GBq. All patients experienced objective tumor responses. In the whole population, multifactorial analysis identified three risk factors associated with REILD: repeated RE (p = 0.036), baseline serum total bilirubin (p = 0.048), and baseline serum aspartate aminotransferase (p = 0.043). Repeated RE proved to be the only independent risk factor for REILD in multivariate analysis (odds ratio 9.6; p = 0.002). Additionally, the administered activity per target volume (in GBq/L) was found to be an independent risk factor for REILD, but only in whole liver treatments (p = 0.033). Conclusion: The risk of REILD appears to be elevated for repeated RE. Objective tumor responses were observed, but establishment of safety limits will require improvement in dosimetric measurement and prediction.

62 RADIOLOGY AND NUCLEAR MEDICINE↗