Search NASA⌕ Search

SEARCH · Search NASA

Results for “feedback amplifier”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

On the merit of hot ion mode for tearing mode stabilization

The stabilization of tearing modes with rf driven current benefits from the cooperative feedback loop between rf power deposition and electron temperature within the island. This effect, termed rf current condensation, can greatly enhance and localize the current driven within magnetic islands. It has previously been shown that the condensation effect opens the possibility of passive stabilization with broad rf profiles, as would be typical of LHCD for steady state operation. Here, we show that this self-healing effect can be dramatically amplified by operation in a hot ion mode, due to the additional electron heat source provided by the hotter ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MJO in Different Orbital Regimes: Role of the Mean State in the MJO’s Amplitude during Boreal Winter

Abstract The Madden–Julian oscillation (MJO) exhibits pronounced seasonality, with one of the key unanswered questions being the following: what controls the maximum in MJO precipitation variance in the Southern Hemisphere during boreal winter? In this study, we examine a set of global climate model simulations in which the eccentricity and precession of Earth’s orbit are altered to change the boreal winter mean state in an attempt to reveal the processes that are responsible for the MJO’s amplitude in the boreal winter. In response to the forced insolation changes, the north–south asymmetry in sea surface temperature is amplified in boreal fall, which intensifies the Hadley circulation in boreal winter. The stronger Hadley circulation yields higher mean precipitation and stronger mean lower-tropospheric westerlies in the southern part of the Indo-Pacific warm pool. The MJO precipitation variability increases significantly where the mean precipitation and lower-tropospheric westerlies strengthen. In the column-integrated moisture budget of the simulated MJO, only surface latent heat flux feedback shows a trend that is consistent with the MJO’s amplitude, suggesting an important role for the surface latent heat flux feedback in the MJO’s amplitude during the boreal winter. An analysis of the moisture–precipitation relationship in the simulations shows that the increase in the mean precipitation lowers the convective moisture adjustment time scale, leading to the increase in precipitation variance. Our results suggest that the mean-state precipitation plays a critical role in the maintenance mechanism of the MJO.

Meteorology & Atmospheric Sciences↗

Lynx x-ray microcalorimeter

Lynx is an x-ray telescope, one of four large satellite mission concepts currently being studied by NASA to be a flagship mission. One of Lynx’s three instruments is an imaging spectrometer called the Lynx x-ray microcalorimeter (LXM), an x-ray microcalorimeter behind an x-ray optic with an angular resolution of 0.5 arc sec and ∼2 sq. m of area at 1 keV. The LXM will provide unparalleled diagnostics of distant extended structures and, in particular, will allow the detailed study of the role of cosmic feedback in the evolution of the Universe. We discuss the baseline design of LXM and some parallel approaches for some of the key technologies. The baseline sensor technology uses transition-edge sensors, but we also consider an alternative approach using metallic magnetic calorimeters. We discuss the requirements for the instrument, the pixel layout, and the baseline readout design, which uses microwave superconducting quantum interference devices and high-electron mobility transistor amplifiers and the cryogenic cooling requirements and strategy for meeting these requirements. For each of these technologies, we discuss the current technology readiness level and our strategy for advancing them to be ready for flight. We also describe the current system design, including the block diagram, and our estimate for the mass, power, and data rate of the instrument.

Simon R. Bandler↗

Near Infrared Cavity Ring-Down Spectroscopy for Isotopic Analyses of CH4 on Future Martian Surface Missions

A compact Near Infrared Continuous Wave Cavity Ring-Down Spectrometer (near-IR-cw-CRDS) was developed as a candidate for future planetary surface missions. The optical cavity was made of titanium with rugged quartz windows to protect the delicate super cavity from the harsh environmental changes that it would experience during space flight and a Martian surface mission. This design assured the long-term stability of the system. The system applied three distributed feedback laser diodes (DFB-LD), two of which were tuned to the absorption line peaks of (sup 12)CH4 and (sup 13)CH4 at 6046.954 inverse centimeters and 6049.121 inverse centimeters, respectively. The third laser was tuned to a spectral-lines-free region for measuring the baseline cavity loss. The multiple laser design compensated for typical baseline drift of a CRDS system and, thus, improved the overall precision. A semiconductor optical amplifier (SOA) was used instead of an Acousto-Optic Module (AOM) to initiate the cavity ring-down events. It maintained high acquisition rates such as AOM, but consumed less power. High data acquisition rates combined with improved long-term stability yielded precise isotopic measurements in this near-IR region even though the strongest CH4 absorption line in this region is 140 times weaker than that of the strongest mid-IR absorption band. The current system has a detection limit of 1.4 times 10( sup –12) inverse centimeters for (sup 13)CH4. This limit corresponds to approximately 7 parts per trillion volume of CH4 at 100 Torrs. With no further improvements the detection limit of our current near IR-cw-CRDS at an ambient Martian pressure of approximately 6 Torrs (8 millibars) would be 0.25 parts per billion volume for one 3.3 minute long analysis.

portable nir crds↗

Arctic Shrub Expansion, Plant Functional Trait Variation, and Effects on Belowground Carbon Cycling (Final Technical Report)

Terrestrial ecosystems are undergoing dramatic changes in response to climate warming, and these changes are expected to feedback to the atmosphere, potentially altering the trajectory of future climate change. Feedbacks from Arctic ecosystems are a major concern because the Arctic is projected to warm significantly in the 21 st century and because >50% of global belowground organic carbon is stored in permafrost and overlying soils. Warming-driven release of this carbon could drastically increase atmospheric greenhouse gas concentrations and accelerate climate warming. Plant communities are also responding to warming, as evidenced by the widely documented increase in woody-shrub growth and “greening” across much of the Arctic tundra biome. This vegetation shift may offset or amplify warming by altering carbon cycling. The direction and magnitude of shrub effects remain highly uncertain, however, due to limited understanding of the consequences of shrub expansion for belowground carbon cycling and simplification of these relationships in models. The major shrubs expanding in the Arctic (Betula, Salix, and Alnus) vary widely with respect to aboveground and belowground traits (e.g., tissue production and chemistry, rooting depth, microbial symbionts), and may also exhibit substantial intraspecific variation in these traits in response to environmental conditions. Such variation is likely to have profound implications for soil carbon cycling. The overarching goal of this project was to improve process-based understanding of the influence of shrub expansion on carbon cycling to enable improved representation of carbon dynamics in ecosystem and Earth system models. We investigated how plant functional traits vary among shrub genera, respond to environmental conditions, and affect belowground carbon and nutrient cycling by quantifying relationships among functional traits and biogeochemical cycling along edaphic gradients nested within a climate gradient in the Alaskan tundra. We found consistent differences in leaf and root traits among shrub genera and between shrubs and a widespread sedge species, indicating diverse nutrient acquisition strategies and belowground impacts among different arctic shrubs. We also found striking differences in trait values among individuals within the same species or genera within sites. Soil parameters were more important than climate parameters for predicting size and leaf trait variation, and root trait responses were less dependent on climate overall. For all but one root trait, including parameters representing aboveground traits improved the predictive ability of models. These results demonstrate that tundra shrub traits vary considerably at local scales and soil factors drive this variation, especially belowground. Furthermore, leveraging information about aboveground traits and soil conditions can improve predictions of how belowground traits will respond to climate change. Despite these differences, soil carbon and nitrogen pools in the active layer did not vary among plots dominated by different shrub or sedge genera. Instead, pool sizes generally decreased from warmer to colder sites, consistent with a productivity gradient. Patterns of isotopic N composition indicate that shrubs tighten nitrogen cycling via nitrogen resorption or immobilization of shrub litter. Overall, these results suggest that further identifying the specific shrub genera in the tundra landscape will ultimately provide better predictions of belowground dynamics across the changing arctic. We also performed simulation experiments with the Terrestrial Ecosystem Model (TEM) incorporated in the Predictive Ecosystem Analyzer (PEcAn) framework, treats model parameters as probability distributions, estimates parameters based on a synthesis of available field data, and then quantifies both model sensitivity and uncertainty to a given parameter or suite of parameters. We performed simulations across different types of tundra, including shrub tundra. One key finding was that both model sensitivity and uncertainty to a given parameter could vary within the same type of tundra, but in a different geographical location, such as over the climate gradient of shrub tundra described above. We organized a special session at the annual meeting of the Ecological Society of America in August 2019 to disseminate our results, refine recommendations for model improvement, and initiate collaborations to implement these recommendations in existing models of tundra carbon dynamics at ecosystem to Earth system scales. Our results support DOE near-term priorities by providing mechanistic insights into the role of vegetation change in the terrestrial carbon cycle in a region that is inadequately represented in Earth system models. Current models reduce the complexity of Arctic vegetation to a small number of plant functional types (PFTs). This approach implicitly assumes that each PFT represents the average ecological function of its constituent species, thus ignoring the effects of trait variation on biogeochemical cycling and potentially leading to large uncertainty in the sign and magnitude of ecosystem feedbacks to climate. By quantifying variation of plant functional traits across broad gradients of climatic and edaphic conditions and elucidating the linkages of such variation with carbon and nutrient cycling, our results illustrate the need and create a foundation for further developing trait-based modeling approaches that allow the traits of PFTs to vary as a function of environmental conditions. These approaches should improve the capacity of simulation models to offer insights into ecosystem carbon dynamics associated with novel plant communities in a rapidly changing Arctic.

54 ENVIRONMENTAL SCIENCES↗

Enhanced electron amplifier structure and method of fabricating the enhanced electron amplifier structure

An enhanced electron amplifier structure includes a microporous substrate having a front surface and a rear surface, the microporous substrate including at least one channel extending substantially through the substrate between the front surface and the rear surface, an ion diffusion layer formed on a surface of the channel, the ion diffusion layer comprising a metal oxide, a resistive coating layer formed on the first ion diffusion layer, an emissive coating layer formed on the resistive coating layer, and an optional ion feedback layer formed on the front surface of the structure. The emissive coating produces a secondary electron emission responsive to an interaction with a particle received by the channel. The ion diffusion layer, the resistive coating layer, the emissive coating layer, and the ion feedback layer are independently deposited via chemical vapor deposition or atomic layer deposition.

Mane, Anil U.↗

The Regenerative Current Mirror: A Very Low Power Front-End Amplifier for Silicon Pixel Detectors

In pixelized detectors, reducing power consumption in the front end ASIC chips becomes a crucial demand. Optimization based on mature pre-amplifier schemes today is unlikely to bring sufficient improvements. A new CMOS front-end gain stage topology with very low power consumption called regenerative current mirror is developed to fulfill the demand. The circuit takes advantage of high speed performance of current amplification while operating with relatively low bias current. The regenerative current mirror uses a NMOS current mirror and a PMOS current mirror, both with nominal gain of 1, to form a loop-back topology that provides a positive feedback. An NMOS FET with an external adjustable voltage applied to it gate terminal is used to limit open loop gain of the current mirrors to be slightly lower than 1. This yields a net gain of the positive feedback loop to be much larger than 1 while operating the current mirrors under relatively low bias currents. Simulation shows that in 65 nm fabrication process, the power consumption of the gain stages suitable for silicon pixel detectors can be controlled < 10 micro-Watts per channel.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

2021–2022 Can Do Colorado E-Bike Full-Scale Pilot Program Study

In 2021–2022, the Colorado Energy Office conducted a full-scale pilot program study on e-bike usage as part of the Can Do Colorado initiative, providing e-bikes to low-income participants across the state. A [2020 mini pilot program study](https://www.nlr.gov/transportation/secure-transportation-data/tsdc-2020-can-do-colorado-e-bike-pilot-program.html) informed the full-scale study. Both studies used pedal-assist e-bikes, which feature an electric motor and battery to help power the bike. The motor amplifies the power behind each pedal stroke, augmenting the energy you put into the bike. #### Data Collection Agency The Colorado Energy Office conducted the study in partnership with local organizations in Adams and Broomfield counties (Smart Commute Metro North), Boulder (Community Cycles), Durango (Four Corners Office for Resource Efficiency), Fort Collins (City of Fort Collins), Pueblo (Pueblo County), and Vail (Town of Vail). #### Survey Methodology Program participants received an e-bike and accessories at no cost and manually submitted travel data and feedback via the CanBikeCO smartphone app. Developed in partnership with NLR, the app used a customized version of the open-source [NLR OpenPATH platform](https://www.nlr.gov/transportation/openpath.html). #### Survey Records and Data Survey records include 170 participants. The six datasets contain up to 18 months of partially automated travel diaries, combining sensed and surveyed travel behavior data—patterns of multimodal, end-to-end, individual human mobility—as well as demographic information from participants. The number of e-bike trips and e-bike miles traveled per location are 1,560 and 4,179 for Adams and Broomfield counties; 8,481 and 27,000 for Boulder; 2,815 and 6,307 for Durango; 3,483 and 7,080 for Fort Collins; 4,022 and 14,887 for Pueblo, and 1,206 and 3,3361 for Vail.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

The Regenerative Current Mirror: A Very Low Power Front-End Amplifier for Silicon Pixel Detectors

In pixelized detectors, reducing power consumption in the front- end ASIC chips becomes a crucial demand. Optimization based on mature pre-amplifier schemes today is unlikely to bring sufficient improvements. A new CMOS front-end gain stage topology with very low power consumption called regenerative current mirror is developed to fulfill the demand. The circuit takes advantage of high-speed performance of current amplification while operating with relatively low bias current. The regenerative current mirror uses a NMOS current mirror and a PMOS current mirror, both with nominal gain of 1, to form a loop-back topology that provides a positive feedback. An NMOS FET with an external adjustable voltage applied to it gate terminal is used to limit open loop gain of the current mirrors to be slightly lower than 1. This yields a net gain of the positive feedback loop to be much larger than 1 while operating the current mirrors under relatively low bias currents. Simulation shows that in 65 nm fabrication process, the power consumption of the gain stages suitable for silicon pixel detectors can be controlled < 10 micro-Watts per channel. Another novel low-power circuit called Pseudo-Thyristor presented in another document will replace traditional discriminator and the Regenerative Current Mirror plus Pseudo- Thyristor will provide a full solution for the silicon pixel low-power frontend ASIC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High signal-to-noise ratio differential conductance spectroscopy

The scanning tunneling microscope (STM) has enabled manipulation and interrogation of surfaces with atomic-scale resolution. Electronic information about a surface is obtained by combining the imaging capability of the STM with scanning tunneling spectroscopy, i.e., measurement of current-voltage (I/V) characteristics of the surface. We propose a change in the STM feedback loop that enables capturing a higher quality dI/dV image. A high frequency dither voltage is added to the bias voltage of the sample, and the fundamental frequency component of the resulting current is demodulated. The in-phase component of this signal is then plotted along with the X and Y position data, constructing the dI/dV image. Here, we show that by incorporating notch filters in the STM feedback loop, we may utilize a high-amplitude dither voltage to significantly improve the quality of the obtained dI/dV image.

42 ENGINEERING↗

An analytic theory for the degree of Arctic Amplification

Arctic Amplification (AA), the amplified surface warming in the Arctic relative to the global mean, is a robust and impactful feature of climate change. While the basic physical picture of AA has been depicted, a clear understanding of how the degree of AA is determined has not been established. Here, by deciphering the intricate role of atmospheric heat transport (AHT), we build a two-box energy-balance model of AA and derive that the degree of AA is a simple nonlinear function of the Arctic and global feedbacks, the meridional heterogeneity in radiative forcing, and the partial sensitivities of AHT to global mean warming and meridional warming gradient. The formula captures the varying degree of AA in individual climate models and attributes the variation to specific physical factors. It further conveys a concise picture of how essential physics mutually determine the degree of AA and limit the range within 1.5~3.5. Our results articulate AHT as both forcing and feedback to AA, highlighting its partial sensitivities instead of total change as the key parameters for understanding AA. We also find that the effect of lapse rate feedback, a widely-recognized major contributor to AA, is fully offset by the effect of water vapor feedback.

54 ENVIRONMENTAL SCIENCES↗

Transverse BBU Suppression with Feedback for Energy Recovery Linacs

In this study, we present beam dynamics simulations of the Strong Hadron Cooling (SHC) Energy Recovery Linac (ERL) that incorporate a feedback (FB) system designed to mitigate Beam Breakup (BBU) instabilities. The FB effectively suppresses BBU and increases the threshold current by roughly an order of magnitude. Our analysis revealed the aliasing behavior of the dominant higher-order mode (HOM) and its suppression by the FB, as evident from the power spectral density (PSD) of the beam centroid’s horizontal motion at the exit of the final linac section. Although the FB system— even when affected by noise—successfully reduced the BBU peak, it also amplified the PSD at other frequencies. These results provide important insights into BBU suppression and threshold current enhancement in ERLs.

Setiniyaz, S. [Thomas Jefferson National Accelerat↗

Role of Longwave Cloud-Radiation Feedback in the Simulation of the Madden-Julian Oscillation

The role of the cloud-radiation interaction in the simulation of the Madden-Julian oscillation (MJO) is investigated. A special focus is on the enhancement of column-integrated diabatic heating due to the greenhouse effects of clouds and moisture in the region of anomalous convection. The degree of this enhancement, the greenhouse enhancement factor (GEF), is measured at different precipitation anomaly regimes as the negative ratio of anomalous outgoing longwave radiation to anomalous precipitation. Observations show that the GEF varies significantly with precipitation anomaly and with the MJO cycle. The greenhouse enhancement is greater in weak precipitation anomaly regimes and its effectiveness decreases monotonically with increasing precipitation anomaly. The GEF also amplifies locally when convection is strengthened in association with the MJO, especially in the weak precipitation anomaly regime (less than 5 mm day(exp -1)). A robust statistical relationship is found among CMIP5 climate model simulations between the GEF and the MJO simulation fidelity. Models that simulate a stronger MJO also simulate a greater GEF, especially in the weak precipitation anomaly regime (less than 5 mm day(exp -1)). Models with a greater GEF in the strong precipitation anomaly regime (greater than 30 mm day(-1)) represent a slightly slower MJO propagation speed. Many models that lack the MJO underestimate the GEF in general and in particular in the weak precipitation anomaly regime. The results herein highlight that the cloud-radiation interaction is a crucial process for climate models to correctly represent the MJO.

Clouds↗

Buffet induced structural/flight-control system interaction of the X-29A aircraft

High angle-of-attack flight regime research is currently being conducted for modern fighter aircraft at the NASA Ames Research Center's Dryden Flight Research Facility. This flight regime provides enhanced maneuverability to fighter pilots in combat situations. Flight research data are being acquired to compare and validate advanced computational fluid dynamic solutions and wind-tunnel models. High angle-of-attack flight creates unique aerodynamic phenomena including wing rock and buffet on the airframe. These phenomena increase the level of excitation of the structural modes, especially on the vertical and horizontal stabilizers. With high gain digital flight-control systems, this structural response may result in an aeroservoelastic interaction. A structural interaction on the X-29A aircraft was observed during high angle-of-attack flight testing. The roll and yaw rate gyros sensed the aircraft's structural modes at 11, 13, and 16 Hz. The rate gyro output signals were then amplified through the flight-control laws and sent as commands to the flaperons and rudder. The flight data indicated that as the angle of attack increased, the amplitude of the buffet on the vertical stabilizer increased, which resulted in more excitation to the structural modes. The flight-control system sensors and command signals showed this increase in modal power at the structural frequencies up to a 30 degree angle-of-attack. Beyond a 30 degree angle-of-attack, the vertical stabilizer response, the feedback sensor amplitude, and control surface command signal amplitude remained relatively constant. Data are presented that show the increased modal power in the aircraft structural accelerometers, the feedback sensors, and the command signals as a function of angle of attack. This structural interaction is traced from the aerodynamic buffet to the flight-control surfaces.

Voracek, David F.↗

Long-Term Reliability of High Speed SiGe/Si Heterojunction Bipolar Transistors

Accelerated lifetime tests were performed on double-mesa structure Si/Si0.7Ge0.3/Si npn heterojunction bipolar transistors, grown by molecular beam epitaxy, in the temperature range of 175C-275C. Both single- and multiple finger transistors were tested. The single-finger transistors (with 5x20 micron sq m emitter area) have DC current gains approximately 40-50 and f(sub T) and f(sub MAX) of up to 22 GHz and 25 GHz, respectively. The multiple finger transistors (1.4 micron finger width, 9 emitter fingers with total emitter area of 403 micron sq m) have similar DC current gain but f(sub T) of 50 GHz. It is found that a gradual degradation in these devices is caused by the recombination enhanced impurity diffusion (REID) of boron atoms from the p-type base region and the associated formation of parasitic energy barriers to electron transport from the emitter to collector layers. This REID has been quantitatively modeled and explained, to the first order of approximation, and the agreement with the measured data is good. The mean time to failure (MTTF) of the devices at room temperature is estimated from the extrapolation of the Arrhenius plots of device lifetime versus reciprocal temperature. The results of the reliability tests offer valuable feedback for SiGe heterostructure design in order to improve the long-term reliability of the devices and circuits made with them. Hot electron induced degradation of the base-emitter junction was also observed during the accelerated lifetime testing. In order to improve the HBT reliability endangered by the hot electrons, deuterium sintered techniques have been proposed. The preliminary results from this study show that a deuterium-sintered HBT is, indeed, more resistant to hot-electron induced base-emitter junction degradation. SiGe/Si based amplifier circuits were also subjected to lifetime testing and we extrapolate MTTF is approximately 1.1_10(exp 6) hours at 125iC junction temperature from the circuit lifetime data.

Ponchak, George E.↗

Multichannel X-Band Dielectric-Resonator Oscillator

A multichannel dielectric-resonator oscillator (DRO), built as a prototype of a local oscillator for an X-band transmitter or receiver, is capable of being electrically tuned among and within 26 adjacent frequency channels, each 1.16 MHz wide, in a band ranging from 7,040 to 7,070 GHz. The tunability of this oscillator is what sets it apart from other DROs, making it possible to use mass-produced oscillator units of identical design in diverse X-band applications in which there are requirements to use different fixed frequencies or to switch among frequency channels. The oscillator (see figure) includes a custom-designed voltage-controlled-oscillator (VCO) monolithic microwave integrated circuit (MMIC), a dielectric resonator disk (puck), and two varactor-coupling circuits, all laid out on a 25-mil (0.635-mm)-thick alumina substrate having a length and width of 17.8 mm. The resonator disk has a diameter of 8.89 mm and a thickness of 4.01 mm. The oscillator is mounted in an 8.9-mm-deep cavity in a metal housing. The VCO MMIC incorporates a negative- resistance oscillator amplifier along with a buffer amplifier. The resonator disk is coupled to a microstrip transmission line connected to the negative-resistance port of the VCO MMIC. The two varactor-coupling circuits include microstrip lines, laid out orthogonally to each other, for coupling with the resonator disk. Each varactor microstrip line is DC-coupled to an external port via a microwave choke. One varactor is used for coarse tuning to select a channel; the other varactor is used (1) for fine tuning across the 1.16-MHz width of each channel and (2) as a feedback port for a phase-lock loop. The resonator disk is positioned to obtain (1) the most desirable bandwidth, (2) relatively tight coupling with the microstrip connected to the coarse-tuning varactor, and (3) relatively loose coupling with the microstrip connected to the fine-tuning varactor. Measurements of performance showed that the oscillator can be switched among any of the 26 channels and can be phase-locked to a nominal frequency in any channel. The degree of nonlinearity of tuning was found not to exceed 2.5 percent. The tuning sensitivity was found to be 6.15 MHz/V at a bias offset of -2 V on the phase-lock-loop varactor. The phase noise of the oscillator in free-running operation was found to be -107 dBc/Hz (where dBc signifies decibels relative to the carrier signal) at 100 kHz away from the carrier frequency.

Mysoor, Narayan↗

The role of sea ice in 2 x CO2 climate model sensitivity. Part 1: The total influence of sea ice thickness and extent

As a first step in investigating the effects of sea ice changes on the climate sensitivity to doubled atmospheric CO2, the authors use a standard simple sea ice model while varying the sea ice distributions and thicknesses in the control run. Thinner ice amplifies the atmospheric temperature senstivity in these experiments by about 15% (to a warming of 4.8 C), because it is easier for the thinner ice to be removed as the climate warms. Thus, its impact on sensitivity is similar to that of greater sea ice extent in the control run, which provides more opportunity for sea ice reduction. An experiment with sea ice not allowed to change between the control and doubled CO2 simulations illustrates that the total effect of sea ice on surface air temperature changes, including cloud cover and water vapor feedbacks that arise in response to sea ice variations, amounts to 37% of the temperature sensitivity to the CO2 doubling, accounting for 1.56 C of the 4.17 C global warming. This is about four times larger than the sea ice impact when no feedbacks are allowed. The different experiments produce a range of results for southern high latitudes with the hydrologic budget over Antarctica implying sea level increases of varying magnitude or no change. These results highlight the importance of properly constraining the sea ice response to climate perturbations, necessitating the use of more realistic sea ice and ocean models.

Rind, D.↗

End of Green Sahara amplified mid- to late Holocene megadroughts in mainland Southeast Asia

Between 5 and 4 thousand years ago, crippling megadroughts led to the disruption of ancient civilizations across parts of Africa and Asia, yet the extent of these climate extremes in mainland Southeast Asia (MSEA) has never been defined. This is despite archeological evidence showing a shift in human settlement patterns across the region during this period. We report evidence from stalagmite climate records indicating a major decrease of monsoon rainfall in MSEA during the mid- to late Holocene, coincident with African monsoon failure during the end of the Green Sahara. Through a set of modeling experiments, we show that reduced vegetation and increased dust loads during the Green Sahara termination shifted the Walker circulation eastward and cooled the Indian Ocean, causing a reduction in monsoon rainfall in MSEA. Our results indicate that vegetation-dust climate feedbacks from Sahara drying may have been the catalyst for societal shifts in MSEA via ocean-atmospheric teleconnections.

54 ENVIRONMENTAL SCIENCES↗