Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite-difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Numerical solution of the Navier-Stokes equations for arbitrary blunt bodies in supersonic flows

A time-dependent, two-dimensional Navier-Stokes code employing the body-fitted coordinate technique has been developed for supersonic flows past blunt bodies of arbitrary shape. The computer program is based on the finite-difference approximation of the compressible Navier-Stokes equations transformed to nonorthogonal curvilinear coordinates with the contravariant components of the velocity vector as dependent variables. The bow shock ahead of the body is obtained as part of the solution, by 'shock capturing'. Numerical solutions of the complete equations are presented in detail for free-stream Mach number 4.6, Reynolds number 10,000, and an isothermal wall temperature of 556 K for a circular cylinder with the free-stream outer boundaries forming a hyperbola in the front and a circular arc in the back.

Warsi, Z. U. A.↗

An empirical relationship for homogenization in single-phase binary alloy systems

A semiempirical formula is developed for describing the extent of interaction between constituents in single-phase binary alloy systems with planar, cylindrical, or spherical interfaces. The formula contains two parameters that are functions of mean concentration and interface geometry of the couple. The empirical solution is simple, easy to use, and does not involve sequential calculations, thereby allowing quick estimation of the extent of interactions without lengthy calculations. Results obtained with this formula are in good agreement with those from a finite-difference analysis.

Unnam, J.↗

Influence of two-dimensional hygrothermal gradients on interlaminar stresses near free edges

Interlaminar stresses are determined for mechanical loading, uniform hygrothermal loading, and gradient moisture loading through implementation of a finite-element computer code. Nonuniform two-dimensional hygroscopic gradients are obtained from a finite-difference solution of the diffusion equation. It is shown that hygroscopic-induced stresses can be larger than those resulting from mechanical and thermal loading, and that the distribution of the interlaminar normal stress may be changed significantly in the presence of a two-dimensional moisture gradient in the boundary layer of a composite laminate.

Farley, G. L.↗

The accurate solution of Poisson's equation by expansion in Chebyshev polynomials

A Chebyshev expansion technique is applied to Poisson's equation on a square with homogeneous Dirichlet boundary conditions. The spectral equations are solved in two ways - by alternating direction and by matrix diagonalization methods. Solutions are sought to both oscillatory and mildly singular problems. The accuracy and efficiency of the Chebyshev approach compare favorably with those of standard second- and fourth-order finite-difference methods.

Haidvogel, D. B.↗

A computational fluid dynamic technique valid at the centerline for non-axisymmetric problems in cylindrical coordinates

A technique is described for the numerical solution of non-axisymmetric flow problems posed in cylindrical coordinates when the z-axis is included in the flowfield. The highlight of the technique is the manner in which the singularities at the centerline are handled. Specifically, the governing flowfield equations at r = 0 are put in a special form by applying L'Hospital's Rule. The required radial derivatives are evaluated using a one-sided, second-order accurate, first-difference. This leads to a smooth, convergent calculation of the flowfield at the centerline. This appears to be the first generally applicable numerical method for avoiding coordinate system singularities in the context of a finite-difference scheme, and could have application to many nonaxisymmetric flows. The technique is illustrated by specific results for the time-dependent flowfield inside an internal combustion engine.

Griffin, M. D.↗

Thermal control of low-pressure fractionation processes

Thermal models detailing the solidification paths for shallow basaltic magma chambers (both open and closed systems) were calculated using finite-difference techniques. The total solidification time for closed chambers are comparable to previously published calculations; however, the temperature-time paths are not. These paths are dependent on the phase relations and the crystallinity of the system, because both affect the manner in which the latent heat of crystallization is distributed. In open systems, where a chamber would be periodically replenished with additional parental liquid, calculations indicate that the possibility is strong that a steady-state temperature interval is achieved near a major phase boundary. In these cases it is straightforward to analyze fractionation models of the basaltic liquid evolution and their corresponding cumulate sequences. This steady thermal fractionating state can be invoked to explain large amounts of erupted basalts of similar composition over long time periods from the same volcanic center and some rhythmically layered basic cumulate sequences.

Usselman, T. M.↗

Numerical solution for supersonic flow near the trailing edge of a flat plate

In the present study, problems of laminar and turbulent two-dimensional flow of a viscous compressible fluid near the trailing edge of a thin flat plate are considered. The complete set of Navier-Stokes equations is solved by the finite-difference method of MacCormack (MacCormack and Baldwin, 1975). It is an explicit, predictor-corrector, time-splitting method of second order acuracy. The computational mesh employed has sufficient resolution for all the characteristic lengths suggested by theory. In the laminar case, the present results are compared with the triple deck solution of Daniels (1974). This comparison indicates that the asymptotic triple deck theory for supersonic trailing edge flow is accurate within five percent for Reynolds numbers greater than 1000. In the turbulent case, the Prandtl-Van Driest-Clauser algebraic eddy viscosity model is used. The numerical results show that the region of upstream influence is approximately of the order of the boundary layer thickness. The solutions for skin-friction, pressure and wake center-line velocity are presented.

Degani, D.↗

Equatorial wave-mean flow interaction - A numerical study of the role of latitudinal shear

A time-dependent primitive equation model for an equatorial channel is used to assess the interaction of equatorial Kelvin and mixed Rossby-gravity waves with the mean flow. The proposed model involves a semiimplicit time-differencing scheme and a finite-difference grid in the meridional plane. It is shown that forced equatorial waves interact with mean flow to produce equatorial jets characterized by downward-moving westerly (Kelvin wave forcing) and easterly (mixed Rossby-gravity wave forcing) shear zones, respectively. For parameters characteristic of the observed waves in the equatorial stratosphere, the wave-mean flow interaction process always reduces the amplitude of any initial cross-equatorial mean wind shear. The mean flow profile tends to become symmetric about the equator as the interaction process continues.

Holton, J. R.↗

A fast, conservative algorithm for solving the transonic full-potential equation

A fast, fully implicit approximate factorization (AF) algorithm designed to solve the conservative transonic full-potential equation in either two or three dimensions is described. The algorithm uses an upwind bias of the density coefficient for stability in supersonic regions. This provides an effective upwind difference of the streamwise terms for any orientation of the velocity vector (i.e., 'rotated differencing'), and thereby greatly enhances the reliability of the present algorithm. A numerical transformation is used to establish an arbitrary body-fitted finite-difference mesh. Computed results for both airfoils and simplified wings demonstrate substantial improvement in convergence speed for the new algorithm relative to standard successive-line overrelaxation algorithms.

Holst, T. L.↗

Evaluation of finite element formulations for transient conduction forced-convection analysis

Numerical studies clarifying the advantages and disavantages of conventional versus upwind convective finite elements are presented along with lumped versus consistent formulations for practical conduction forced-convection analysis. A finite-element procedure for treatment of negligible capacitance fluid nodes is presented. The procedure is based on procedures used in finite-element structural dynamics to treat nodes with negligible structural mass. Two finite-element programs and a finite-difference lumped-parameter program used in the studies are discussed. Evaluation studies utilizing three convection and two combined conduction-convection problems are then presented and discussed. Additionally, the computational time saving offered by the finite element procedure is considered for a practical combined conduction-convection problem.

Thornton, E. A.↗

Amplitude effects on the dynamic performance of hydrostatic gas thrust bearings

A strip gas film bearing with inherently compensated inlets is analyzed to determine the effect of disturbance amplitude on its dynamic performance. The governing Reynolds' equation is solved using finite-difference techniques. The time dependent load capacity is represented by a Fourier series up to and including the third harmonics. For the range of amplitudes investigated the linear stiffness was independent of the amplitude, and the linear damping was inversely proportional to (1 - epsilon-squared) to the 1.5 power where epsilon is the amplitude relative to the film thickness.

Stiffler, A. K.↗

Finite-element numerical modeling of atmospheric turbulent boundary layer

A dynamic turbulent boundary-layer model in the neutral atmosphere is constructed, using a dynamic turbulent equation of the eddy viscosity coefficient for momentum derived from the relationship among the turbulent dissipation rate, the turbulent kinetic energy and the eddy viscosity coefficient, with aid of the turbulent second-order closure scheme. A finite-element technique was used for the numerical integration. In preliminary results, the behavior of the neutral planetary boundary layer agrees well with the available data and with the existing elaborate turbulent models, using a finite-difference scheme. The proposed dynamic formulation of the eddy viscosity coefficient for momentum is particularly attractive and can provide a viable alternative approach to study atmospheric turbulence, diffusion and air pollution.

Lee, H. N.↗

An efficient explicit-implicit-characteristic method for solving the compressible Navier-Stokes equations

Explicit, implicit, and characteristic finite-difference methods are applied to solve model equations representative of the compressible Navier-Stokes equations. An approach is then formulated for solving the Navier-Stokes equation at high Reynolds numbers. The approach has drastically reduced the computation time required to obtain viscous flow solutions. Computational results for shock wave separated flows are presented.

Maccormack, R. W.↗

Determination of elastic stresses in gas-turbine disks

A method is presented for the calculation of elastic stresses in symmetrical disks typical of those of a high-temperature gas turbine. The method is essentially a finite-difference solution of the equilibrium and compatibility equations for elastic stresses in a symmetrical disk. Account can be taken of point-to-point variations in disk thickness, in temperature, in elastic modulus, in coefficient of thermal expansion, in material density, and in Poisson's ratio. No numerical integration or trial-and-error procedures are involved and the computations can be performed in rapid and routine fashion by nontechnical computers with little engineering supervision. Checks on problems for which exact mathematical solutions are known indicate that the method yields results of high accuracy. Illustrative examples are presented to show the manner of treating solid disks, disks with central holes, and disks constructed either of a single material or two or more welded materials. The effect of shrink fitting is taken into account by a very simple device.

Manson, S S↗

Direct method of design and stress analysis of rotating disks with temperature gradient

A method is presented for the determination of the contour of disks, typified by those of aircraft gas turbines, to incorporate arbitrary elastic-stress distributions resulting from either centrifugal or combined centrifugal and thermal effects. The specified stress may be radial, tangential, or any combination of the two. Use is made of the finite-difference approach in solving the stress equations, the amount of computation necessary in the evolution of a design being greatly reduced by the judicious selection of point stations by the aid of a design chart. Use of the charts and of a preselected schedule of point stations is also applied to the direct problem of finding the elastic and plastic stress distribution in disks of a given design, thereby effecting a great reduction in the amount of calculation. Illustrative examples are presented to show computational procedures in the determination of a new design and in analyzing an existing design for elastic stress and for stresses resulting from plastic flow.

Manson, S S↗

Cross-Sectional Deformations of Monocoque Beams and Their Effects on the Natural Vibration Frequencies

The variational principle, differential equations, and boundary conditions governing the cross-sectional distortions due to inertia loading of a two-dimensional model of a thin monocoque wing are shown. A theoretical analysis of this simplified model is made in order to determine the nature of the coupling between the cross-sectional modes and the spanwise deformation modes. General solutions are obtained in finite-difference form for arbitrary cross sections and an exact solution is presented for a parabolic-arc cross section of constant cover thickness. The application of these results in evaluating the coupled frequencies of the actual structure is discussed. Frequencies evaluated for a parabolic-arc monocoque beam show good agreement with experimental values.

Thomson, Robert G.↗

Advances in Application of Fast Semidirect Computational Methods in Transonic Flow

This paper is intended as a review and summary of the advances made in a recently developed approach for rapid numerical solution of the equations of inviscid transonic aerodynamics. The investigation has been limited to two-dimensional, steady, inviscid flow over airfoils in a subsonic free stream, with emphasis on development of a rapid computational technique, rather than on generality of application. The approach uses finite-difference algorithms called "fast direct elliptic solvers" within an iteration scheme. "Direct" means that the entire computation field is solved at once, rather than in successive traverses over the field as in a point- or line-relaxation method. Such an iterative method is referred to as "semidirect." The iterative convergence can be faster than in other relaxation methods because changes are felt simultaneously at all points in each succeeding iteration. Direct elliptic solvers and semidirect methods have restrictions, but these are gradually being removed. Direct solvers were first developed for solving Poisson's equation on a rectangle without interior boundaries. A method to treat first-order systems, a direct Cauchy-Riemann solver has also been developed. Numerical treatment of part of a system of nonlinear equations by a Poisson solver has been reported. Also Poisson solvers in semidirect methods were used for nonseparable elliptic equations. The semidirect method was extended to the solution of a problem of mixed type, where the improved Murman-Cole transonic small-disturbance difference equations were solved. A slightly supercritical flow over a biconvex airfoil was treated successfully, but the iterations did not converge for more strongly supercritical conditions In another work the addition of terms ot both sides of the difference equations stabilized the iteration for supercritical conditions with large supersonic zones. For this, the Cauchy-Riemann solver was revised to incl,ude the needed terms. Most recently, the evaluation of parameters for rapid convergence and comparisons, with Murman's line-relaxation method was described. The method was extended to full second order accuracy in a fully conservative formulation in another work.

Martin, E. Dale↗