Search NASA⌕ Search

SEARCH · Search NASA

Results for “forecast sensitivity to observations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Evaluation of Model Microphysics Within Precipitation Bands of Extratropical Cyclones

Recent studies evaluating the bulk microphysical schemes (BMPs) within cloud resolving models (CRMs) have indicated large uncertainties and errors in the amount and size distributions of snow and cloud ice aloft. The snow prediction is sensitive to the snow densities, habits, and degree of riming within the BMPs. Improving these BMPs is a crucial step toward improving both weather forecasting and climate predictions. Several microphysical schemes in the Weather Research and Forecasting (WRF) model down to 1.33‐km grid spacing are evaluated using aircraft, radar, and ground in situ data from the Global Precipitation Mission Coldseason Precipitation Experiment (GCPEx) experiment, as well as a few years (15 winter storms) of surface measurements of riming, crystal habit, snow density, and radar measurements at Stony Brook, NY (SBNY on north shore of Long Island) during the 2009-2012 winter seasons. Surface microphysical measurements at SBNY were taken every 15 to 30 minutes using a stereo microscope and camera, and snow depth and snow density were also recorded. During these storms, a vertically-pointing Ku-band radar was used to observe the vertical evolution of reflectivity and Doppler vertical velocities. A Particle Size and Velocity (PARSIVEL) disdrometer was also used to measure the surface size distribution and fall speeds of snow at SBNY. For the 15 cases at SBNY, the WSM6, Morrison (MORR), Thompson (THOM2), and Stony Brook (SBU-YLIN) BMPs were validated. A non-spherical snow assumption (THOM2 and SBU-YLIN) simulated a more realistic distribution of reflectivity than spherical snow assumptions in the WSM6 and MORR schemes. The MORR, WSM6, and SBU-YLIN schemes are comparable to the observed velocity distribution in light and moderate riming periods. The THOM2 is ~0.25 meters per second too slow with its velocity distribution in these periods. In heavier riming, the vertical Doppler velocities in the WSM6, THOM2, and MORR schemes were ~0.25 meters per second too slow, while the SBU-YLIN was 0.25 to 0.5 meters per second too fast. Overall, the BMPs simulate a size distribution close to the observed for D < 4 mm in the dendritic, plates, and mixed habit periods. The model BMPs underestimate the size distribution when large aggregates were observed. For D > 6 mm in the dendrites, side planes, and mixed habit periods, the BMPs are likely not simulating enough aggregation to create a larger size distribution, although the MORR (double moment) scheme seemed to perform best. These SBNY results will be compared with some results from GCPEx for a warm frontal snow band observed at 18 February 2012.

Colle, Brian A.↗
NASA NTRS2013

Evaluation of Model Microphysics within Precipitation Bands of Extratropical Cyclones

Recent studies evaluating the bulk microphysical schemes (BMPs) within cloud resolving models (CRMs) have indicated large uncertainties and errors in the amount and size distributions of snow and cloud ice aloft. The snow prediction is sensitive to the snow densities, habits, and degree of riming within the BMPs. Improving these BMPs is a crucial step toward improving both weather forecasting and climate predictions. Several microphysical schemes in the Weather Research and Forecasting (WRF) model down to 1.33‐km grid spacing are evaluated using aircraft, radar, and ground in situ data from the Global Precipitation Mission Coldseason Precipitation Experiment (GCPEx) experiment, as well as a few years (15 winter storms) of surface measurements of riming, crystal habit, snow density, and radar measurements at Stony Brook, NY (SBNY on north shore of Long Island) during the 2009-2012 winter seasons. Surface microphysical measurements at SBNY were taken every 15 to 30 minutes using a stereo microscope and camera, and snow depth and snow density were also recorded. During these storms, a vertically-pointing Ku-band radar was used to observe the vertical evolution of reflectivity and Doppler vertical velocities. A Particle Size and Velocity (PARSIVEL) disdrometer was also used to measure the surface size distribution and fall speeds of snow at SBNY. For the 15 cases at SBNY, the WSM6, Morrison (MORR), Thompson (THOM2), and Stony Brook (SBU-YLIN) BMPs were validated. A non-spherical snow assumption (THOM2 and SBU-YLIN) simulated a more realistic distribution of reflectivity than spherical snow assumptions in the WSM6 and MORR schemes. The MORR, WSM6, and SBU-YLIN schemes are comparable to the observed velocity distribution in light and moderate riming periods. The THOM2 is approx 0.25 m/s too slow with its velocity distribution in these periods. In heavier riming, the vertical Doppler velocities in the WSM6, THOM2, and MORR schemes were approx 0.25 m/s too slow, while the SBU-YLIN was 0.25 to 0.5 m/s too fast. Overall, the BMPs simulate a size distribution close to the observed for D < 4 mm in the dendritic, plates, and mixed habit periods. The model BMPs underestimate the size distribution when large aggregates were observed. For D > 6 mm in the dendrites, side planes, and mixed habit periods, the BMPs are likely not simulating enough aggregation to create a larger size distribution, although the MORR (double moment) scheme seemed to perform best. These SBNY results will be compared with some results from GCPEx for a warm frontal snow band observed at 18 February 2012.

Colle, Brian A.↗
NASA NTRS2001

Modeling Modern Methane Emissions from Natural Wetlands: Model Description and Results - 1

Methane is an important greenhouse gas which contributes about 22 percent to the present greenhouse effect. Natural wetlands currently constitute the biggest methane source and were the major source in preindustrial times. Wetland emissions depend highly on the climate, i.e., on soil temperature and water table. To investigate the response of methane emissions from natural wetlands to climate variations, a process-based model that derives methane emissions from natural wetlands as a function of soil temperature, water table, and net primary productivity is used. For its application on the global scale, global data sets for all model parameters are generated. In addition, a simple hydrologic model is developed in order to simulate the position of the water table in wetlands. The hydrologic model is tested against data from different wetland sites, and the sensitivity of the hydrologic model to changes in precipitation is examined. The global methane­ hydrology model constitutes a tool to study temporal and spatial variations in methane emissions from natural wetlands. The model is applied using high-frequency atmospheric forcing fields from European Center for Medium-range Weather Forecasts (ECMWF) re-analyses of the period from 1982 to 1993. We calculate global annual methane emissions from wetlands to be 260 teragrams per year. Twenty-five percent of these methane emissions originate from wetlands north of 30 degrees North Latitude. Only 60 percent of the produced methane is emitted, while the rest is re-oxidized. A comparison of zonal integrals of simulated global wetland emissions and results obtained by an inverse modeling approach shows good agreement. In a test with data from two wetlands the seasonality of simulated and observed methane emissions agrees well.

Biogeochemical processes↗
DOE OSTI2022

Convective Updraft and Downdraft Characteristics of Continental Mesoscale Convective Systems in the Model Gray Zone

Here, the "gray zone" of convective modeling is defined as the range of horizontal grid spacings (Δx) at which turbulent transport processes are only partially resolved by the dynamics of the numerical model. This zone typically covers Δx from a few kilometers to several hundred meters, wherein the realistic representation of convective cloud processes can be challenging. This study characterizes the convective draft behaviors at multiple Δx across the gray zone and determines the appropriate Δx that can reliably capture these salient convective properties. We perform an ensemble of idealized simulations of mesoscale convective systems (MCS) using the Weather Research and Forecasting model at various Δx from 4 km to 250 m over the central U.S. An evaluation of key MCS kinematic properties is constrained using unique, long-term vertical velocity estimates obtained by radar wind profilers deployed by the Department of Energy Atmospheric Radiation Measurement user facility. MCS simulations for all Δx tested overestimate (underestimate) the probabilities of convective updrafts (downdrafts) compared to the observations. In terms of the convective draft intensity, finer-Δx models overestimate the updraft intensity, while the opposite is found for downdrafts. Moving from Δx = 4 km to 250 m, downdrafts become stronger and more frequent especially at middle and upper levels, attributed to additional drag from an increasing graupel frequency and compensation of enhanced updraft velocity. Simulated draft characteristics, including core size, intensity, and probability of occurrence, exhibit pronounced changes at Δx greater than 500 m, but suggest less sensitivity when Δx is reduced below 500 m.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1985

Use of ground-based wind profiles in mesoscale forecasting

A brief review is presented of recent uses of ground-based wind profile data in mesoscale forecasting. Some of the applications are in real time, and some are after the fact. Not all of the work mentioned here has been published yet, but references are given wherever possible. As Gage and Balsley (1978) point out, sensitive Doppler radars have been used to examine tropospheric wind profiles since the 1970's. It was not until the early 1980's, however, that the potential contribution of these instruments to operational forecasting and numerical weather prediction became apparent. Profiler winds and radiosonde winds compare favorably, usually within a few m/s in speed and 10 degrees in direction (see Hogg et al., 1983), but the obvious advantage of the profiler is its frequent (hourly or more often) sampling of the same volume. The rawinsonde balloon is launched only twice a day and drifts with the wind. In this paper, I will: (1) mention two operational uses of data from a wind profiling system developed jointly by the Wave Propagation and Aeronomy Laboratories of NOAA; (2) describe a number of displays of these same data on a workstation for mesoscale forecasting developed by the Program for Regional Observing and Forecasting Services (PROFS); and (3) explain some interesting diagnostic calculations performed by meteorologists of the Wave Propagation Laboratory.

Schlatter, Thomas W.↗
NASA NTRSDate not supplied

Impacts of Non-Simultaneous Global Photospheric Magnetic Measurements on Coronal and Solar Wind Modeling

The intensity and arrival time of coronal mass ejections (CMEs) can be significantly influenced by the background solar wind encountered as they propagate outward from the Sun into the interplanetary medium. In addition, solar energetic particles (SEPs) race ahead of CME shock fronts and flare regions along magnetic field lines largely determined by the background solar wind. Predicting the solar wind accurately is therefore critical for improving forecasts of CMEs, SEPs, and high-speed streams. Modeling of the corona and solar wind is challenging in general, as it is highly dependent on global photospheric magnetic field maps, which serve as the boundary conditions to all coronal models that drive solar wind models. Unfortunately, less than half of the Sun’s photospheric magnetic field is reliably measured from any given vantage point and thus it is common for the maps to have highly dated and unreliable measurements in them. While Solar Obiter (SolO) now provides for the first time the opportunity to have simultaneous measurements of nearly the entire surface magnetic field of Sun (e.g., when SolO/PHI measurements are combined with those from SDO/HMI), the required alignment to accomplish this occurs only occasionally. Further, coronal models are extremely sensitive to the strengths of the polar magnetic fields of the Sun, which remain poorly observed. Recently, efforts to mitigate this problem include using flux transport models such as the Air Force Data Assimilative Photospheric Flux Transport (ADAPT) model, which evolves the field forward in time using well known transport processes occurring on the Sun. However, it cannot account for the emergence of new magnetic flux without direct observations. The ESA VIGIL mission will eventually provide continuous observations from the L5, and the proposed SunCHASER mission will likewise do this at the L4 vantage point should it be funded. Ultimately, what is needed is a constellation of spacecraft distributed around the Sun with magnetographs that continuously measure the global surface magnetic field. In this talk, we discuss how the lack of simultaneous global measurements of the photospheric magnetic field adversely impacts the predictive performance of coronal and solar wind models.

C. Nick Arge↗
DOE OSTI2023

Tracking Aerosol Convection Interactions Experiment (TRACER) Field Campaign Report

Convective clouds serve a critical role in the Earth’s energy and water cycles through their transport of heat, moisture, momentum, and chemical species through the troposphere driving the global circulation (e.g., Hartmann et al. 1984, Del Genio et al. 2012, Su et al. 2014). On more local scales, convective clouds impact the atmospheric heating profile through diabatic heating effects, removal of water from the atmospheric column through precipitation, and conditioning of the local environment impacting further development of clouds (e.g., Sullivan and Voigt 2021). These critical roles underscore the importance of realistic representation of convective processes across scales of models from large-eddy simulation (LES), to convection-permitting models (CPM; e.g., Kendon et al. 2020, Marinescu et al. 2021), to numerical weather prediction (NWP) models used for operational weather forecasting, to Earth system models used to predict climate sensitivity (Sanderson et al. 2011, Sherwood et al. 2014, Tomassini et al. 2014, Zhao et al. 2016, Cronin et al. 2017). A key component of improving model representation of convective clouds is better quantification and parameterization of updraft microphysics and dynamics, including their interactions with the surrounding environment and storm organization (Bony et al. 2015, Hagos and Houze 2016, Donner et al. 2016, Morrison et al. 2020). Aerosol is an important environmental factor that could affect convective clouds and precipitation since cloud droplet and ice formation processes are initiated by it. Andrae et al. (2004) hypothesized that aerosols associated with increased biomass burning particles acting as cloud condensation nuclei (CCN) result in smaller and more monodisperse cloud droplets leading to suppression of warm rain formation, ultimately leading to more cloud water being lofted above the freezing level based on observations in the Amazon region. The subsequent increase in latent heat release increases the buoyancy of rising convective parcels invigorating the deep convection. This work was followed by a description of the theoretical basis for this “cold-phase invigoration” by Rosenfeld et al. (2008), who argued that it could have a significant effect for deep convective clouds with warm cloud-bases. Several modeling studies (e.g., Khain et al. 2005, 2009, van den Heever et al. 2006, Fan et al. 2007, 2009, 2012, Lee et al. 2008, Storer et al. 2010, Lebo et al. 2012, Storer and van den Heever 2013, Chen et al. 2020, Dagan et al. 2022) have investigated these aerosol-convection interactions and the environmental factors that influence their relative importance and magnitude. More recently, several studies have indicated that “warm-phase invigoration”, the enhancement of convection through condensational heating, also appears to play a role in enhancing both shallow cumuli (Seiki and Nakajima 2014, Saleeby et al 2015) and deeper tropical convection (Lebo and Seinfeld 2011, Khain et al. 2012, Sheffield et al 2015, Fan et al. 2018, Igel and van den Heever 2021), as well as Houston thunderstorms (Fan et al. 2007, 2020). However, still other studies have provided additional evidence of systematic biases in simulated convective outflow ice size distribution properties, which are consistent with a lack of poorly understood secondary ice production within convective updrafts (e.g., Fridlind et al. 2017). To help address these critical gaps in our understanding of cloud processes, aerosol processes and aerosol-cloud interactions, the Tracking Aerosol Convection Interactions Experiment was designed building upon efforts by the Aerosol, Cloud, Precipitation and Climate (ACPC) Initiative (http://acpcintiative.org/), a joint effort of the International Geosphere-Biosphere Programme (IGBP) and the World Climate Research Program (WCRP) that focused on resolving uncertainties in the interactions between aerosol and clouds towards better understanding the role that these interactions play in the climate system. The TRACER campaign was motivated by recommendations from a number of pilot studies undertaken by ACPC (van den Heever et al. 2017, Fridlind et al. 2019, Hu et al. 2019, Fan et al. 2020, Marinescu et al. 2021, Hernandez-Deckers et al. 2022) that pointed towards the southeastern Texas region as a locale where aerosol-convection interactions could be studied owing to the copious occurrence of isolated convection during the summer months accompanied by diverse and significant sources of aerosols from both anthropogenic and natural sources. The TRACER campaign began on 01 October 2021 and extended through 30 September 2022 with an intensive operational period (IOP) during June-September 2022. Three main sites (Table 1) were managed by the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1990

Diurnal ocean surface layer model validation

The diurnal ocean surface layer (DOSL) model at the Fleet Numerical Oceanography Center forecasts the 24-hour change in a global sea surface temperatures (SST). Validating the DOSL model is a difficult task due to the huge areas involved and the lack of in situ measurements. Therefore, this report details the use of satellite infrared multichannel SST imagery to provide day and night SSTs that can be directly compared to DOSL products. This water-vapor-corrected imagery has the advantages of high thermal sensitivity (0.12 C), large synoptic coverage (nearly 3000 km across), and high spatial resolution that enables diurnal heating events to be readily located and mapped. Several case studies in the subtropical North Atlantic readily show that DOSL results during extreme heating periods agree very well with satellite-imagery-derived values in terms of the pattern of diurnal warming. The low wind and cloud-free conditions necessary for these events to occur lend themselves well to observation via infrared imagery. Thus, the normally cloud-limited aspects of satellite imagery do not come into play for these particular environmental conditions. The fact that the DOSL model does well in extreme events is beneficial from the standpoint that these cases can be associated with the destruction of the surface acoustic duct. This so-called afternoon effect happens as the afternoon warming of the mixed layer disrupts the sound channel and the propagation of acoustic energy.

Hawkins, Jeffrey D.↗
NASA NTRS2018

Comparisons of Bin and Bulk Microphysics Schemes in Simulations of Topographic Winter Precipitation with Radar and Radiometer Measurements

The Hebrew University Cloud Model (HUCM) bin scheme and the Thompson bulk scheme in the Weather Research and Forecasting (WRF) model are compared to assess biases often found in simulated brightness temperature and radar reflectivity. Compared to our preceding study that evaluated several bulk schemes in the WRF model, the current study obtains a reduction of the bias from excessive microwave scattering by precipitation ice for both HUCM bin and the Thompson bulk microphysics schemes for a topographic winter precipitation event associated with an atmospheric river. The Thompson particle size distributions (PSDs) and snow particle density assumption are implemented into the Goddard Satellite Data Simulator Unit (G‐SDSU) and have produced improvements. Despite the greater sophistication of the bin scheme in representing cloud and precipitation processes, the simulation with the Thompson bulk scheme is generally in better agreement with observations for this winter event. The explicitly resolved hydrometeor PSDs in HUCM enable analysis of mass spectra variations in response to changes in microphysics assumptions. Two HUCM sensitivity runs tested the enhancement of snow particle breakup and the influence of ice nuclei (IN) concentration. Higher IN concentration resulted in increased snow mass and broadened the spectrum toward small‐size particles. Modified snow mass spectra and resultant changes in graupel contributed to modifications in scattering and reflectivity simulations. The article demonstrates the bin scheme's capability to provide a new means to improve our understanding of uncertainties in mesoscale weather models and radiative transfer models.

microwave remote sensing↗
NASA NTRS1993

Rossby-gravity waves in tropical total ozone

Randel (1992) has recently reported evidence for Rossby-gravity waves in tropical data fields produced by the European Centre for Medium Range Weather Forecasts (ECMWF). The purpose of this paper is to show that similar features are observable in fields of total column ozone from the Total Ozone Mapping Spectrometer (TOMS) satellite instrument. The observed features are episodic, have zonal (east-west) wavelengths of approximately 6,000-10,000 km and oscillate with periods of 5-10 days. The modes exhibit westward phase progression and eastward group velocity. A simple linear model is used to estimate the magnitude of total ozone perturbations induced by Rossby-gravity waves. The model is able to account for the magnitude of observed TOMS features as well as their asymmetry about the equator. The significance of finding Rossby-gravity waves in total ozone fields is that: (1) the report of similar features in ECMWF tropical fields is corroborated with an independent data set; and (2) the TOMS data set is demonstrated to possess surprising versatility and sensitivity to relatively smaller scale tropical phenomena.

Stanford, J. L.↗
DOE OSTI2021

Cherenkov Telescope Array sensitivity to the putative millisecond pulsar population responsible for the Galactic Centre excess

ABSTRACT The leading explanation of the Fermi Galactic Centre γ-ray excess is the extended emission from an unresolved population of millisecond pulsars (MSPs) in the Galactic bulge. Such a population would, along with the prompt γ-rays, also inject large quantities of electrons/positrons (e±) into the interstellar medium. These e± could potentially inverse-Compton (IC) scatter ambient photons into γ-rays that fall within the sensitivity range of the upcoming Cherenkov Telescope Array (CTA). In this article, we examine the detection potential of CTA to this signature by making a realistic estimation of the systematic uncertainties on the Galactic diffuse emission model at TeV-scale γ-ray energies. We forecast that, in the event that e± injection spectra are harder than E−2, CTA has the potential to robustly discover the IC signature of a putative Galactic bulge MSP population sufficient to explain the Galactic Centre excess for e± injection efficiencies in the range of ≈2.9–74.1 per cent, or higher, depending on the level of mismodelling of the Galactic diffuse emission components. On the other hand, for spectra softer than E−2.5, a reliable CTA detection would require an unphysically large e± injection efficiency of ${\gtrsim} 158{{\ \rm per\ cent}}$. However, even this pessimistic conclusion may be avoided in the plausible event that MSP observational and/or modelling uncertainties can be reduced. We further find that, in the event that an IC signal were detected, CTA can successfully discriminate between an MSP and a dark matter origin for the radiating e±.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Virtual tower measurements during the American WAKE ExperimeNt (AWAKEN)

Dual-Doppler lidar measurements were made during the American WAKE ExperimeNt to provide height-resolved measurements of wind speed and direction at multiple locations immediately south of the leading row turbines in the King Plains wind farm in Oklahoma. These so-called virtual tower measurements were performed to characterize the inflow into the wind farm and to assess possible upwind blockage effects due to the collective action of the wind farm. The campaign was conducted from 12 November 2022 to 17 October 2023, during which time 14 unique virtual tower locations were sampled with heights ranging from 240 to 490 m AGL. The wind retrieval algorithm provided estimates of the horizontal winds and their uncertainties with a vertical resolution of about 10 m, while also accounting for the tilt of the lidar platform. The virtual tower results are compared to collocated lidar wind profiling data at the A1 site, which was located roughly 2.4 rotor diameters south of the nearest turbine. The wind speed difference between the wind profiler and the virtual tower was found to be quite sensitive to atmospheric stability and wind direction below 250 m AGL. The largest differences were observed for inflow under stable conditions, where the profiler wind speeds were observed to be about 22% lower than the virtual tower near hub height. These results suggest that there are persistent horizontal gradients in the flow upwind of the wind farm which result in biased estimates using standard ground-based lidar wind profiling methods.

17 WIND ENERGY↗
DOE OSTI2022

High-Resolution Wind Resource Data Set of the Greater Puerto Rico Region

In February 2022, the U.S. Department of Energy and six national laboratories launched the Puerto Rico Grid Resilience and Transitions to 100% Renewable Energy Study (PR100). PR100 aims to provide a comprehensive analysis of possible pathways for Puerto Rico's energy future, with a goal of 100% renewable energy by 2050. As a part of the renewable energy potential assessment in this project, we developed 20 years (2001-2020) of data using a numerical weather prediction (NWP) model for onshore and offshore wind resource assessment for the Puerto Rico. The research steps in developing the long-term wind resource data sets based on the NWP model were: 1. Model wind resource based on the Weather Research and Forecasting (WRF) model. 2. Develop WRF model configurations for Puerto Rico. 3. Test WRF with 11 different physics parameterizations for planetary boundary layer (PBL). 4. Assess WRF output from the different PBL schemes against observations. 5. Select a final model configuration which can produce the modeled wind speed with sufficient accuracy. 6. Produce 20 years wind resource data sets for Puerto Rico region. In the first stage of our framework for developing wind resource data, we developed a WRF model configuration using two nested domains (9 km and 3 km) to cover Puerto Rico and U.S. Virgin Islands and downscale the ERA5 reanalysis data (0.25 degrees x 0.25 degrees; hourly interval) to a 3-km domain. For the second stage, we implemented one-year simulations focused on using 11 different PBL physics parameterizations to find a combination of WRF physics parameterizations that could provide accurately modeled wind speed for Puerto Rico. We also analyzed the sensitivity of the modeled wind speed to PBL schemes for onshore and offshore locations. The WRF output resulting from the 11 WRF experiments using different PBL parameterizations were evaluated against observations obtained from the National Data Buoy Center (NDBC) as well as at hub height for a location for which measurements were available. A final model setup selected through the validation with observational data was used to produce 20 years of data with 3-km spatial and 5-minute temporal resolution. The WRF model output was post-processed to include wind profiles and basic atmospheric variables in a format that can be easily used for downstream modeling. The 20 years of wind resource data will be made available through NREL and support the estimation of wind energy development costs for the PR100 study.

17 WIND ENERGY↗
NASA NTRS2012

Numerical Analysis Using WRF-SBM for the Cloud Microphysical Structures in the C3VP Field Campaign: Impacts of Supercooled Droplets and Resultant Riming on Snow Microphysics

Two distinct snowfall events are observed over the region near the Great Lakes during 19-23 January 2007 under the intensive measurement campaign of the Canadian CloudSat/CALIPSO validation project (C3VP). These events are numerically investigated using the Weather Research and Forecasting model coupled with a spectral bin microphysics (WRF-SBM) scheme that allows a smooth calculation of riming process by predicting the rimed mass fraction on snow aggregates. The fundamental structures of the observed two snowfall systems are distinctly characterized by a localized intense lake-effect snowstorm in one case and a widely distributed moderate snowfall by the synoptic-scale system in another case. Furthermore, the observed microphysical structures are distinguished by differences in bulk density of solid-phase particles, which are probably linked to the presence or absence of supercooled droplets. The WRF-SBM coupled with Goddard Satellite Data Simulator Unit (G-SDSU) has successfully simulated these distinctive structures in the three-dimensional weather prediction run with a horizontal resolution of 1 km. In particular, riming on snow aggregates by supercooled droplets is considered to be of importance in reproducing the specialized microphysical structures in the case studies. Additional sensitivity tests for the lake-effect snowstorm case are conducted utilizing different planetary boundary layer (PBL) models or the same SBM but without the riming process. The PBL process has a large impact on determining the cloud microphysical structure of the lake-effect snowstorm as well as the surface precipitation pattern, whereas the riming process has little influence on the surface precipitation because of the small height of the system.

lake-effect↗
NASA NTRS2017

Characterizing Agricultural Impacts of Recent Large-Scale US Droughts and Changing Technology and Management

Process-based agricultural models, applied in novel ways, can reproduce historical crop yield anomalies in the US, with median absolute deviation from observations of 6.7% at national-level and 11% at state-level. In seasons for which drought is the overriding factor, performance is further improved. Historical counterfactual scenarios for the 1988 and 2012 droughts show that changes in agricultural technologies and management have reduced system-level drought sensitivity in US maize production by about 25% in the intervening years. Finally, we estimate the economic costs of the two droughts in terms of insured and uninsured crop losses in each US county (for a total, adjusted for inflation, of $9 billion in 1988 and $21.6 billion in 2012). We compare these with cost estimates from the counterfactual scenarios and with crop indemnity data where available. Model based measures are capable of accurately reproducing the direct agro-economic losses associated with extreme drought and can be used to characterize and compare events that occurred under very different conditions. This work suggests new approaches to modeling, monitoring, forecasting, and evaluating drought impacts on agriculture, as well as evaluating technological changes to inform adaptation strategies for future climate change and extreme events.

Climate extremes; Drought impacts; Agriculture; Se↗
NASA NTRS2020

Improved Groundwater Table and L-Band Brightness Temperature Estimates for Northern Hemisphere Peatlands Using New Model Physics and SMOS Observations in a Global Data Assimilation Framework

There is an urgent need to include northern peatland hydrology in global Earth system models to better understand land-atmosphere interactions and sensitivities of peatland functions to climate change, and, ultimately, to improve climate change predictions. In this study, we introduced for the first time peatland-specific model physics into an assimilation scheme for L-band brightness temperature (Tb) data from the Soil Moisture Ocean Salinity (SMOS) mission to improve groundwater table estimates. We conducted two sets of model-only and data assimilation experiments using the Catchment Land Surface Model (CLSM), applying (over peatlands only) in one of them a peatland-specific adaptation (PEATCLSM). The evaluation against in-situ measurements of peatland groundwater table depth indicates the superiority of PEATCLSM model physics and additionally improved performance after assimilating SMOS Tb observations. The better performance of PEATCLSM over nearly all Northern Hemisphere peatlands is further supported by the better agreement between SMOS Tb observations and Tb estimates from the model-only and data assimilation runs. Within the data assimilation scheme, PEATCLSM reduces Tb observation-minus-forecast residuals and leads to reduced data assimilation updates of water storage components and, thus, reduced water budget imbalances in the assimilation system.

SMOS↗
NASA NTRS2011

Accurate Radiometry from Space: An Essential Tool for Climate Studies

The Earth s climate is undoubtedly changing; however, the time scale, consequences and causal attribution remain the subject of significant debate and uncertainty. Detection of subtle indicators from a background of natural variability requires measurements over a time base of decades. This places severe demands on the instrumentation used, requiring measurements of sufficient accuracy and sensitivity that can allow reliable judgements to be made decades apart. The International System of Units (SI) and the network of National Metrology Institutes were developed to address such requirements. However, ensuring and maintaining SI traceability of sufficient accuracy in instruments orbiting the Earth presents a significant new challenge to the metrology community. This paper highlights some key measurands and applications driving the uncertainty demand of the climate community in the solar reflective domain, e.g. solar irradiances and reflectances/radiances of the Earth. It discusses how meeting these uncertainties facilitate significant improvement in the forecasting abilities of climate models. After discussing the current state of the art, it describes a new satellite mission, called TRUTHS, which enables, for the first time, high-accuracy SI traceability to be established in orbit. The direct use of a primary standard and replication of the terrestrial traceability chain extends the SI into space, in effect realizing a metrology laboratory in space . Keywords: climate change; Earth observation; satellites; radiometry; solar irradiance

Fox, Nigel↗
DOE OSTI2025

Large-eddy simulation of an atmospheric bore and associated gravity wave effects on wind farm performance in the southern Great Plains

Gravity waves are a common occurrence in the atmosphere, with a variety of generation mechanisms. Their impact on wind farms has only recently gained attention, with most studies focused on wind farm-induced gravity waves. In this study, the interaction between a wind farm and gravity waves generated by an atmospheric bore event is assessed using multiscale large-eddy simulations. The atmospheric bore is created by a thunderstorm downdraft from a nocturnal mesoscale convective system (MCS). The associated gravity waves impact the wind resource and power production at a nearby wind farm during the American Wake Experiment (AWAKEN) in the US southern Great Plains. A two-domain nested setup (Δx=300 and 20 m) is used in the Weather Research and Forecasting (WRF) model, forced with data from the High-Resolution Rapid Refresh model, to capture both the formation of the bore and its interaction with individual wind turbines. The MCS is resolved on the large outer domain, where the structure of the bore and the associated gravity waves are found to be especially sensitive to parameterized microphysics processes. On the finer inner domain, gravity wave interactions with individual wind turbines are resolved; wake dynamics are captured using a generalized actuator disk parameterization in WRF. The gravity waves are found to have a strong effect on the atmosphere above the wind farm; however, the effect of the waves is more nuanced closer to the surface where there is additional turbulence, both ambient and wake-generated. Notably, the gravity waves modulate the mesoscale environment by weakening and dissipating the preexisting low-level jet, which reduces hub-height wind speed and hence the simulated power output, which is confirmed by the observed supervisory control and data acquisition (SCADA) power data. Additionally, the gravity waves induce local wind direction variations correlated with fluctuations in pressure, which lead to fluctuations in the simulated power output as various turbines within the farm are subjected to waking from nearby turbines.

17 WIND ENERGY↗