Search NASA⌕ Search

SEARCH · Search NASA

Results for “grid analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Advanced ion thruster and electrochemical launcher research

The theoretical model of orificed hollow cathode operation predicted experimentally observed cathode performance with reasonable accuracy. The deflection and divergence characteristics of ion beamlets emanating from a two grid optics system as a function of the relative offset of screen and accel grids hole axes were described. Ion currents associated with discharge chamber operation were controlled to improve ion thruster performance markedly. Limitations imposed by basic physical laws on reductions in screen grid hole size and grid spacing for ion optics systems were described. The influence of stray magnetic fields in the vicinity of a neutralizer on the performance of that neutralizer was demonstrated. The ion current density extracted from a thruster was enhanced by injecting electrons into the region between its ion accelerating grids. Theoretical analysis of the electrothermal ramjet concept of launching space bound payloads at high acceleration levels is described. The operation of this system is broken down into two phases. In the light gas gun phase the payload is accelerated to the velocity at which the ramjet phase can commence. Preliminary models of operation are examined and shown to yield overall energy efficiences for a typical Earth escape launch of 60 to 70%. When shock losses are incorporated these efficiencies are still observed to remain at the relatively high values of 40 to 50%.

Wilbur, P. J.↗
NASA NTRS1992

Navier-Stokes solution of transonic cascade flows using nonperiodic C-type grids

A new kind of C-type grid is proposed, this grid is non-periodic on the wake and allows minimum skewness for cascades with high turning and large camber. Reynolds-averaged Navier-Stokes equations are solved on this type of grid using a finite volume discretization and a full multigrid method which uses Runge-Kutta stepping as the driving scheme. The Baldwin-Lomax eddy-viscosity model is used for turbulence closure. A detailed numerical study is proposed for a highly loaded transonic blade. A grid independence analysis is presented in terms of pressure distribution, exit flow angles, and loss coefficient. Comparison with experiments clearly demonstrates the capability of the proposed procedure.

Arnone, Andrea↗
NASA NTRS1993

The three-dimensional Multi-Block Advanced Grid Generation System (3DMAGGS)

As the size and complexity of three dimensional volume grids increases, there is a growing need for fast and efficient 3D volumetric elliptic grid solvers. Present day solvers are limited by computational speed and do not have all the capabilities such as interior volume grid clustering control, viscous grid clustering at the wall of a configuration, truncation error limiters, and convergence optimization residing in one code. A new volume grid generator, 3DMAGGS (Three-Dimensional Multi-Block Advanced Grid Generation System), which is based on the 3DGRAPE code, has evolved to meet these needs. This is a manual for the usage of 3DMAGGS and contains five sections, including the motivations and usage, a GRIDGEN interface, a grid quality analysis tool, a sample case for verifying correct operation of the code, and a comparison to both 3DGRAPE and GRIDGEN3D. Since it was derived from 3DGRAPE, this technical memorandum should be used in conjunction with the 3DGRAPE manual (NASA TM-102224).

Alter, Stephen J.↗
NASA NTRS1992

Budget analysis of the boundary layer grid flights during FIFE 1987

An aircraft grid pattern was flown by the Canadian Twin Otter to map the low-level fluxes and structure over the First International Satellite Land Surface Climatology Project (ISLSCP) Field Experiment (FIFE) research area in 1987. The time dependence and horizontal advection of heat and moisture were extracted from these flights, combined with surface flux measurements and boundary layer top measurements from radiosondes, to analyze the boundary layer budget using a mixed layer model. The results confirm the suggestion of an earlier study that the boundary layer top entrainment (when parameterized using the buoyancy flux) is nearly double the value used by many modeling studies. Both surface and aircraft data have been revised, and it now appears that the direct measurements of the sensible and latent heat fluxes by the aircraft underestimated these fluxes by about 20 percent, because of filtering and undersampling of long wavelength contributions.

Betts, A. K.↗
NASA NTRS1993

A Navier-Stokes solver for turbomachinery applications

A computer code for solving the Reynolds-averaged full Navier-Stokes equations has been developed and applied using H- and C-type grids. The Baldwin-Lomax eddy-viscosity model is used for turbulence closure. The integration in time is based on an explicit four-stage Runge-Kutta scheme. Local time stepping, variable coefficient implicit residual smoothing, and a full multigrid method have been implemented to accelerate steady-state calculations. A grid independence analysis is presented for a transonic rotor blade. Comparisons with experimental data show that the code is an accurate viscous solver and can give very good blade-to-blade predictions for engineering applications.

Arnone, A.↗
NASA NTRS1993

Multigrid methods for differential equations with highly oscillatory coefficients

New coarse grid multigrid operators for problems with highly oscillatory coefficients are developed. These types of operators are necessary when the characters of the differential equations on coarser grids or longer wavelengths are different from that on the fine grid. Elliptic problems for composite materials and different classes of hyperbolic problems are practical examples. The new coarse grid operators can be constructed directly based on the homogenized differential operators or hierarchically computed from the finest grid. Convergence analysis based on the homogenization theory is given for elliptic problems with periodic coefficients and some hyperbolic problems. These are classes of equations for which there exists a fairly complete theory for the interaction between shorter and longer wavelengths in the problems. Numerical examples are presented.

Engquist, Bjorn↗
NASA NTRS1997

Computation of Transonic Flows Using Potential Methods

The proposed paper will describe the state of the art associated with numerical solution of the full or exact velocity potential equation for solving transonic, external-aerodynamic flows. The presentation will begin with a review of the literature emphasizing research activities of the past decade. Next, the various forms of the full or exact velocity potential equation, the equation's corresponding mathematical characteristics, and the derivation assumptions will be presented and described in detail. Impact of the derivation assumptions on simulation accuracy, especially with respect to shock wave capture, will be presented and discussed relative to the more complete Euler or Navier-Stokes formulations. The technical presentation will continue with a description of recently developed full potential numerical approach characteristics. This description will include governing equation nondimensionalization, physical-to-computational-domain mapping procedures, a limited description of grid generation requirements, the spatial discretization scheme, numerical implementation of boundary conditions, and the iteration scheme. The next portion of the presentation will present and discuss numerical results for several two- and three-dimensional aerodynamic applications. Included in the results section will be a discussion and demonstration of a typical grid refinement analysis for determining spatial convergence of the numerical solution and level of solution accuracy. Computer timings for a variety of full potential applications will be compared and contrasted with similar results for the Euler equation formulation. Finally. the presentation will end with concluding remarks and recommendations for future work.

Hoist, Terry L.↗
NASA NTRS2005

Statistical Considerations of Data Processing in Giovanni Online Tool

The GES DISC Interactive Online Visualization and Analysis Infrastructure (Giovanni) is a web-based interface for the rapid visualization and analysis of gridded data from a number of remote sensing instruments. The GES DISC currently employs several Giovanni instances to analyze various products, such as Ocean-Giovanni for ocean products from SeaWiFS and MODIS-Aqua; TOMS & OM1 Giovanni for atmospheric chemical trace gases from TOMS and OMI, and MOVAS for aerosols from MODIS, etc. (http://giovanni.gsfc.nasa.gov) Foremost among the Giovanni statistical functions is data averaging. Two aspects of this function are addressed here. The first deals with the accuracy of averaging gridded mapped products vs. averaging from the ungridded Level 2 data. Some mapped products contain mean values only; others contain additional statistics, such as number of pixels (NP) for each grid, standard deviation, etc. Since NP varies spatially and temporally, averaging with or without weighting by NP will be different. In this paper, we address differences of various weighting algorithms for some datasets utilized in Giovanni. The second aspect is related to different averaging methods affecting data quality and interpretation for data with non-normal distribution. The present study demonstrates results of different spatial averaging methods using gridded SeaWiFS Level 3 mapped monthly chlorophyll a data. Spatial averages were calculated using three different methods: arithmetic mean (AVG), geometric mean (GEO), and maximum likelihood estimator (MLE). Biogeochemical data, such as chlorophyll a, are usually considered to have a log-normal distribution. The study determined that differences between methods tend to increase with increasing size of a selected coastal area, with no significant differences in most open oceans. The GEO method consistently produces values lower than AVG and MLE. The AVG method produces values larger than MLE in some cases, but smaller in other cases. Further studies indicated that significant differences between AVG and MLE methods occurred in coastal areas where data have large spatial variations and a log-bimodal distribution instead of log-normal distribution.

Suhung, Shen↗
NASA NTRS2013

Hydrology Research with the North American Land Data Assimilation System (NLDAS) Datasets at the NASA GES DISC Using Giovanni

The North American Land Data Assimilation System (NLDAS) is a collaboration project between NASA/GSFC, NOAA, Princeton Univ., and the Univ. of Washington. NLDAS has created a surface meteorology dataset using the best-available observations and reanalyses the backbone of this dataset is a gridded precipitation analysis from rain gauges. This dataset is used to drive four separate land-surface models (LSMs) to produce datasets of soil moisture, snow, runoff, and surface fluxes. NLDAS datasets are available hourly and extend from Jan 1979 to near real-time with a typical 4-day lag. The datasets are available at 1/8th-degree over CONUS and portions of Canada and Mexico from 25-53 North. The datasets have been extensively evaluated against observations, and are also used as part of a drought monitor. NLDAS datasets are available from the NASA GES DISC and can be accessed via ftp, GDS, Mirador, and Giovanni. GES DISC news articles were published showing figures from the heat wave of 2011, Hurricane Irene, Tropical Storm Lee, and the low-snow winter of 2011-2012. For this presentation, Giovanni-generated figures using NLDAS data from the derecho across the U.S. Midwest and Mid-Atlantic will be presented. Also, similar figures will be presented from the landfall of Hurricane Isaac and the before-and-after drought conditions of the path of the tropical moisture into the central states of the U.S. Updates on future products and datasets from the NLDAS project will also be introduced.

Mocko, David M.↗
NASA NTRSDate not supplied

Evaluating Subgrid-Scale Properties of Low Clouds over the Beaufort Sea in Arctic System Reanalysis using ARISE Airborne In Situ Observations

Arctic low clouds influence the evolution of the Arctic system through their effects on radiative fluxes, boundary layer mixing, stability, turbulence, humidity, and precipitation. Unfortunately, atmospheric models and retrospective analysis (reanalysis) products struggle to accurately simulate the occurrence and properties of low clouds in the Arctic. To better understand the magnitude and possible causes of this problem, we analyze the disagreements between the Arctic System Reanalysis version 2 (ASR) and data taken during the September 2014 Arctic Radiation-IceBridge Sea and Ice Experiment (ARISE) airborne campaign conducted over the Beaufort Sea. Previous analysis of grid scale-averaged meteorological variables revealed a lack of cloud water produced in ASR, related to warm/dry biases, a failure to produce sufficient cloud water in conditions that are observed to be favorable for large cloud water values, and sampling issues with the ARISE flight paths. However, ARISE collected meteorological observations at one second intervals, offering spatial data resolution comparable to the subgrid scale of ASR. Subgrid scale properties and processes must be parameterized in conventional atmospheric models and reanalyses such as ASR, and often rely on assumed distributions of meteorological variables about the grid box mean state. To enable an examination of the realism of ASR’s subgrid scale properties, we use high resolution data from ARISE determine the “subgrid scale” distributions of cloud water and thermodynamic variables in the real atmosphere. Preliminary results show that the subgrid scale distribution of thermodynamic variables about the grid scale mean resembles the triangular distribution assumed in many bulk microphysical parameterization schemes, but also with tails resembling Gaussian distributions. The main goal is to understand the partitioning of the total available atmospheric water into water vapor and cloud water. Models typically covert some percentage of total water in a grid box to cloud water based on the estimated amount of supersaturation from the assumed vapor distribution. The ARISE measurements can reveal the relationship between subgrid scale supersaturation and the partition between cloud water and water vapor.

Jason Brant Dodson↗
NASA NTRSDate not supplied

Predictions of LAGOON Nose Landing Gear Flow and Noise Using Wall-Modeled Large-Eddy Simulations

Wall-modeled large-eddy simulations (WMLESs) of the LAGOON nose landing gear are conducted with compressible Navier–Stokes equations and immersed boundary technique using the Launch, Ascent, and Vehicle Aerodynamics (LAVA) framework. The simulations are conducted using six different Cartesian octree meshes for the grid sensitivity analysis of the near-field and far-field numerical predictions, where the far-field noise results are computed with the Ffowcs Williams–Hawkings acoustic analogy. The effects of numerical tripping induced at the exact locations of the tripping devices in the experiments are also examined. In general, better comparison with the experimental results are shown for the the near-field results obtained with the simulations under the effects of numerical tripping. The effects of tripping are not significant on the far-field noise calculations and the results have reasonable comparison with the experimental data in the low and medium frequency ranges when an impermeable formulation of the acoustic analogy is used.

CST↗
NASA NTRSDate not supplied

Developing Satellite-Assisted Particulate Matter (SAPM) Estimates over India for the MIRA Working Group

The Models, In Situ, and Remote Sensing of Aerosols (MIRA) Working Group is an international collective that encourages collaboration among researchers from these three atmospheric aerosol communities. MIRA currently comprises five interdisciplinary and independently funded Topic Groups, each with specific goals, and involves requests for additional scientific datasets. The Satellite-Assisted Particulate Matter (SAPM) Topic Group, as part of MIRA, focuses on studying particulate matter smaller than 2.5 microns in diameter (PM2.5) due to its significant contribution to air pollution and its harmful effects on human health. While the annual mean PM2.5 levels are typically low (~5-15 μg/m³) across most of the contiguous United States (CONUS), other countries experience much higher concentrations (e.g., India). SAPM aims to compare different methods and techniques for obtaining surface PM2.5 proxies using spaceborne passive and active remote sensors, aerosol models, and in situ measurements. Ultimately, SAPM aims to provide more extensive coverage of PM2.5 concentrations than what is currently available from in situ ground stations, which are limited in some parts of the CONUS and large regions worldwide. Current SAPM members are exploring PM2.5 estimation techniques using active sensors. This presentation offers an overview of these techniques and highlights the strengths and limitations of each approach. These techniques include 1) spaceborne lidar (CALIOP: Cloud-Aerosol Lidar with Orthogonal Polarization) alone, and 2) a combination of spaceborne lidar (CATS: Cloud Aerosol Transport System) and a global aerosol transport model (GEOS: Goddard Earth Observing System). Additionally, we present a case study featuring our SAPM research in India, a country with high levels of PM2.5 concentrations (i.e., state-level annual means of ~100-200 μg/m³). Consistent spatial patterns in PM2.5 over India are found from the in situ data, CALIOP-based, and CATS/model-based methods, with the highest concentrations found in northern India near New Delhi. The gridded PM2.5 analysis yields high R values between in situ and CATS/model (~0.7) and between in situ and CALIOP nighttime (~0.9), as well as good agreement between CATS/model and CALIOP nighttime PM2.5 estimates (R = ~0.8 and slope = ~0.9). For current and future efforts, the SAPM Topic Group is actively seeking new collaborators, especially those working with in situ aerosol measurements, and is interested in acquiring additional aerosol datasets to improve and validate the PM2.5 proxies.

Travis D Toth↗
DOE OSTI2022

Physically Realistic Estimates of Electric Water Heater Demand Response Resource

Multiple grid integration studies have examined the value of demand response, including from water heaters, to bulk power systems. Common shortcomings of these studies include physically unrealistic assumptions. For example, studies often assume that all electric water heater load can be shed for up to an hour to provide capacity or contingency service, that all electric water heater load is shiftable, and that round-trip efficiencies for shifting service are 100%. Another issue is that simply summing up estimates of individual water heaters' flexibility bounds, an attractive idea for constructing the MW-scale resources necessary for direct inclusion in grid investment and operational models, can result in significant overestimates of actual resource, because, e.g., a water heater with the ability to reduce load may not be able sustain the reduction for as long as the aggregate model suggests is possible. This presentation demonstrates the impact of estimating the flexibility of electric water heaters with physically realistic models suitable for grid service analysis. Electric water heater flexibility representations are constructed based on ResStock simulations of New England. Specifically, we examine contingency resource (related to capacity, shed, and contingency reserve services) and energy shifting resource from electric resistance and heat pump water heaters. Different estimation methods are compared; and the surrogate models' event responses are validated against events directly simulated in EnergyPlus. We also demonstrate the impact of using electric water heaters for contingency reserves and energy shifting in detailed models of possible future ISO New England power systems.

building energy modeling↗
DOE OSTI2022

FORCE Development Status Update: Vertical Integration and Benchmarking of System Dynamics

Recent efforts to establish effective models for grid energy analysis, especially given the increase in variable renewable energy (VRE) sources and the economic challenges faced by traditional nuclear energy, have generated new technological considerations. One effort to improve the economic viability of nuclear power involves investigating integrated energy systems (IES) which include secondary energy systems that introduce flexibility and secondary market possibilities to existing and perceived future nuclear energy generation technologies. To analyze the technical and economic potential of IES, the Framework for Optimization of Resources and Economics (FORCE) tool suite was developed through a collaboration among national laboratories. Within the FORCE tool suite, the Holistic Energy Resource Optimization Network (HERON) provides algorithms for analyzing the long-term viability of potential IES technologies, while HYBRID provides algorithms and models to achieve high-resolution analysis of coupling physics over a short time period. Continued maturing of the FORCE tool suite requires further interconnections between the various tools in the suite in order to ensure consistent analysis. Analyses performed by applying HYBRID to transient process modeling should be easily harvestable as inputs to HERON analyses. The first item in this status update is a demonstration of an automated data pipeline for loading data from HYBRID into HERON analyses. Application of HYBRID results to HERON, as part of using the FORCE tool suite, relies on robust modeling assumptions for the various models included in HYBRID. The second result of this status update is the benchmarking and validation of cost and operational data, with a particular focus on natural gas energy generators. These generators are benchmarked with a focus on contrasting them with proposed thermal energy storage (TES) technologies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Accelerating Nuclear-Integrated Data Centers in the USA: SWOT Analysis, Power-Thermal Management Strategies, and Industrial-Scale Demonstration and Potential Deployment

Driven by the growth in digital services, cloud computing, AI, and manufacturing, data centers face rising energy demands that challenge traditional power sources and cooling efficiency. This study explores using nuclear power to meet these demands, focusing on accelerated reactor technology deployment and highlighting needs such as N+1/N+2 power supplies and integrated power-thermal management. A SWOT analysis addresses grid connectivity, reactors, and site selection, particularly DOE sites. Reactor technology demonstration and deployment could be accelerated by leveraging test facilities such as MARVEL, MAGNET, TED, FAS, DOME, LOTUS, ATR, Energy System Proving Grounds, and upcoming Energy Launch Pads, along with modeling and simulation tools such as RELAP5, MOOSE, VERA, RAVEN, and FORCE. The potential power and thermal management options, including various cooling technologies, waste-heat utilization, and an industrial-scale demonstration plan, aim to accelerate the integration of nuclear power and data centers in the USA, while emphasizing community and stakeholder engagement and synergistic efforts.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
NASA NTRS1984

Application of VISSR Atmospheric Sounder (VAS) data in weather analysis

A technique which analyzes irregularly spaced satellite data is described. An experiment with rawinsonde and VISSR Atmospheric Sounder (VAS) radiance measurements collected on March 6-7, 1982 is conducted to reveal the applicability of the technique. The rawinsonde data are analyzed on a 16 x 12 grid using the two pass analysis scheme of Barnes (1973). A scheme similar to the Barnes (1973) procedure is employed to produce gridded analysis of VAS data over a 200 x 15000 km region in central part of the U.S. The use of a correction pass on the initial gridded field is described; the technique is extremely effective on uniformly spaced observations. The incorporation of the limited fine mesh model to the scheme to analyze data in sparse and cloudy regions is examined. A comparison of rawinsonde data with VAS data is provided. The technique proves effective for studying cloudy and sparse areas with VAS data and produces a four-dimensional data set with significant mesoscale structure.

Jedlovec, G. J.↗