Search NASA⌕ Search

SEARCH · Search NASA

Results for “guidelines”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Electromagnetic compatibility design guideline for STADAN

Procedures for achieving electromagnetic compatibility in electronic and electrical equipment for aerospace ground stations are investigated. The application of shielding theory to good design is treated and standards of good practice are outlined for bonding, grounding, wiring, and cabling. Some aspects of filter design are explained, and suggestions are given for the application of filters to electronic and electrical equipment.

Cowdell, R. B.↗
NASA NTRS1972

Program management aid for redundancy selection and operational guidelines

Although this criterion was developed specifically for use on the shuttle program, it has application to many other multi-missions programs (i.e. aircraft or mechanisms). The methodology employed is directly applicable even if the tools (nomographs and equations) are for mission peculiar cases. The redundancy selection criterion was developed to insure that both the design and operational cost impacts (life cycle costs) were considered in the selection of the quantity of operational redundancy. These tools were developed as aids in expediting the decision process and not intended as the automatic decision maker. This approach to redundancy selection is unique in that it enables a pseudo systems analysis to be performed on an equipment basis without waiting for all designs to be hardened.

Hodge, P. W.↗
NASA NTRS1972

In-space propellant systems safety. Volume 2: System safety guidelines and requirements

Detailed system safety guidelines/requirements were developed. Each one describes a safety measure which is suggested as a means of eliminating or reducing a particular hazard, or group of hazards, to an acceptable level, and which, if followed would tend to increase the level of safety in supplying propellants to a user in orbit. The first goal was to identify those actions that should be taken to make propellant logistics operations as safe as possible. The second was to serve as a checklist to verify that these actions had been taken in the design and operation of this and similar programs, or that they had been considered and rejected. The safety measures described in the GLR's are directed toward the prevention of hazards, the avoidance of undesired events, and the protection of the crew.

Source record↗
NASA NTRS1973

Extravehicular activities guidelines and design criteria

A listing of astronaut EVA support systems and equipment, and the physical, operational, and performance characteristics of each major system are presented. An overview of the major ground based support operations necessary in the development and verification of orbital EVA systems is included. The performance and biomedical characteristics of man in the orbital EV environment are discussed. Major factors affecting astronaut EV work performance are identified and delineated as they relate to EV support systems design. Data concerning the medical and physiological aspects of spaceflight on man are included. The document concludes with an extensive bibliography, and a series of appendices which expand on some of the information presented in the main body.

Brown, N. E.↗
NASA NTRS1973

Application of EVA guidelines and design criteria. Volume 1: EVA selection/systems design considerations

Parameters that require consideration by the planners and designers when planning for man to perform functions outside the vehicle are presented in terms of the impact the extravehicular crewmen and major EV equipment items have on the mission, vehicle, and payload. Summary data on man's performance capabilities in the weightless space environment are also provided. The performance data are based on orbital and transearth EVA from previous space flight programs and earthbound simulations, such as water immersion and zero-g aircraft.

Brown, N. E.↗
NASA NTRS1973

Application of EVA guidelines and design criteria. Volume 2: EVA workstation conceptual designs

Several EV workstation concepts were developed and are documented. The workstation concepts were developed following a comprehensive analysis of potential EV missions, functions, and tasks as interpreted from NASA and contractor space shuttle and space station studies, mission models, and related reports. The design of a versatile, portable EVA workstation is aimed at reducing the design and development costs for each mission and aiding in the development of on-orbit serviceable payloads.

Brown, N. E.↗
NASA NTRS1973

Applications of EVA guidelines and design criteria. Volume 3: EVA systems cost model formating

The development of a model for estimating the impact of manned EVA costs on future payloads is discussed. Basic information on the EV crewman requirements, equipment, physical and operational characteristics, and vehicle interfaces is provided. The cost model is being designed to allow system designers to quantify the impact of EVA on vehicle and payload systems.

Brown, N. E.↗
NASA NTRS1973

Investigation of gaseous propellant combustion and associated injector/chamber design guidelines

Injector design criteria are provided for gaseous hydrogen-gaseous oxygen propellants. Design equations and procedures are presented which will allow an injector-chamber designer to a priori estimate of the performance, compatibility and stability characteristics of prototype injectors. The effects of chamber length, element geometry, thrust per element, mixture ratio, impingement angle, and element spacing were evaluated for four element concepts and their derivatives. The data from this series of tests were reduced to a single valued mixing function that describes the mixing potential of the various elements. Performance, heat transfer and stability data were generated for various mixture ratios, propellant temperatures, chamber pressures, contraction ratios, and chamber lengths. Applications of the models resulted in the design of procedures, whereby the performance and chamber heat flux can be calculated directly, and the injector stability estimated in conjunction with existing models.

Calhoon, D. F.↗
NASA NTRS1974

Natural environment support guidelines for space shuttle tests and operations

All space shuttle events from launch through solid rocket booster recovery and orbiter landing are considered in terms of constraints placed on those operations by the natural environment. Thunderstorm activity is discussed as an example of a possible hazard. The activities most likely to require advanced detection and monitoring techniques are identified as those from deorbit decision to Orbiter landing. The inflexible flight plan will require the transmission of real time wind profile information below 24 km and warnings of thunderstorms or turbulence in the Orbiter flight path. Extensive aerial reconnaissance and communication facilities and procedures to permit immediate transmission of aircraft reports to the mission control authority and to the Orbiter will also be required.

Carter, E. A.↗
NASA NTRS1974

LACIE ADP/PI joint case study: ADP analysis guidelines

The procedure is described which was used to train automatic data processing (ADP) analysts to process ERTS 1 imagery from a 5 nm by 6 nm area in Delisle, Canada, and to estimate wheat acreage using training fields provided by photointerpreters. The exercise also served to evaluate and test current large area crop inventory experiment (LACIE) procedures.

Minter, T. C.↗
NASA NTRS1974

Design guidelines for use of adhesives and organic coatings in hybrid microcircuits

A study was conducted to investigate the reliability of organic adhesives in hybrid microcircuits. The objectives were twofold: (1) to identify and investigate problem areas that could result from the use of organic adhesives and (2) to develop evaluation tests to quantify the extent to which these problems occur for commercially available adhesives. Efforts were focused on electrically conductive adhesives. Also, a study was made to evaluate selected organic coatings for contamination protection for hybrid microcircuits.

Caruso, S. V.↗
NASA NTRS1974

Design guidelines for advanced LSI microcircuit packaging using thick film multilayer technology

Ceramic multilayer circuitry results from the sequential build-up of two or more layers of pre-determined conductive interconnections separated by dielectric layers and fired at an elevated temperature to form a solidly fused structure. The resultant ceramic interconnect matrix is used as a base to mount active and passive devices and provide the necessary electrical interconnection to accomplish the desired electrical circuit. Many methods are known for developing multilevel conductor mechanisms such as multilayer printed circuits, welded wire matrices, flexible copper tape conductors, and thin and thick-film ceramic multilayers. Each method can be considered as a specialized field with each possessing its own particular set of benefits and problems. This design guide restricts itself to the art of design, fabrication and assembly of ceramic multilayer circuitry and the reliability of the end product.

Peckinpaugh, C. J.↗
NASA NTRS1975

Guidelines for application of learning/cost improvement curves

The differences between the terms learning curve and improvement curve are noted, as well as the differences between the Wright system and the Crawford system. Learning curve computational techniques were reviewed along with a method to arrive at a composite learning curve for a system given detail curves either by the functional techniques classification or simply categorized by subsystem. Techniques are discussed for determination of the theoretical first unit (TFU) cost using several of the currently accepted methods. Sometimes TFU cost is referred to as simply number one cost. A tabular presentation of the various learning curve slope values is given. A discussion of the various trends in the application of learning/improvement curves and an outlook for the future are presented.

Delionback, L. M.↗
NASA NTRS1975

Biologic guidelines for future space research

Biological experiments conducted onboard balloons, rockets, and spacecraft are described. The effects of aerospace environments on microorganisms, plants, and invertebrate animals were examined.

Parfenov, G. P.↗
NASA NTRS1976

MCC/shuttle test plan. Volume 1: Philosophy and guidelines

The Mission Control Center/Shuttle Test Plan is defined from development through operations to a level of detail which will support the National Aeronautics and Space Administration and contractor management in the following areas: test management, test tool development, and resource and schedule planning.

Source record↗
NASA NTRS1977

Formulation of consumables management models. Guidelines for the development of consumables subsystem redlines for advanced spacecraft

Techniques developed for determining the safe operating range or condition of past space programs are inadequate to support requirements of highly repetitive and routine earth orbit operations of advanced spacecraft systems. General concepts are presented for establishing maximum and minimum limits (redlines) for the consumables subsystems of the space shuttle orbiter. Implementation of a redline status subprocessor is recommended as a substitute for methods employed in past programs. The algorithms developed are amenable for use in the Mission Control Center, the launch processing system, and the space shuttle onboard computer.

Zamora, M. A.↗
NASA NTRS1978

NASA guidelines on report literature

NASA seeks for inclusion in its Scientific and Technical Information System research reports, conference proceedings, meeting papers, monographs, and doctoral and post graduate theses which relate to the NASA mission and objectives. Topics of interest to NASA are presented.

Source record↗