Search NASA⌕ Search

SEARCH · Search NASA

Results for “hexagonal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Experimental measurements of fluid flow in an 84-pin hexagonal rod bundle with spacer grid for a gas-cooled fast modular reactor

A 50 MW e helium-cooled fast modular reactor (FMR) is under development, and as part of the Department of Energy Integrated Research Project (IRP), Texas A&M University is conducting the thermal-hydraulic characterization of its baseline core configuration. Here, we experimentally investigated the axial and cross flow fields characteristics in the hexagonal fuel rod bundle composed of 84 rods, a central rod, and spacer grids at a Reynolds number of 12,000. A fully transparent experimental facility resembling of one unit of the fuel assembly was constructed. Time-resolved particle image velocimetry (TR-PIV) measurements were performed to characterize hydraulic behavior downstream the spacer grid. Velocity measurements were conducted in the axial and radial direction of the rod bundle. From the PIV velocity vector fields, the full-field flow statistics were computed for the mean velocity, vorticity, and Reynolds stresses. An analysis of the energy decay downstream of the spacer grid was conducted with calculations of secondary-flow intensities, turbulent kinetic energy, power spectrum, and spatial-temporal velocity cross correlations. The vorticity field was obtained and pairs of counter-rotating vortexes were identified using a 3D reconstruction of several measurement planes. The data from this experimental campaign will be used to validate numerical models based on Computational Fluid Dynamics and other codes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Magnetoelastic properties of multiferroic hexagonal ErMnO 3

Here, the strength and dynamics of magnetoelastic coupling through the paramagnetic (PM) – antiferromagnetic (AFM) – ferrimagnetic (FIM) transitions in multiferroic hexagonal ErMnO 3 have been investigated by Resonant Ultrasound Spectroscopy. Elastic stiffening by up to 2% below the PM – AFM transition at 80 K arises from biquadratic coupling between strain and the magnetic order parameter with relaxation times longer than ~10 -6 s for the response of spins to changes in strain. In contrast with YMnO 3 , the PM – AFM transition in ErMnO 3 is accompanied by a peak in acoustic loss immediately below the Néel point which is interpreted in terms of strain relaxation accompanying ordering of spins of Er 3+ at 4b sites. Changes in the magnetic ordering scheme at the AFM – FIM transition near 3 K are accompanied by elastic softening of ~0.03 %. During poling of the low temperature ferrimagnetic structure round magnetic hysteresis loops, small changes in elastic stiffness which arise due to the contribution of piezomagnetic and/or piezoelectric moduli are detected. Contributions of piezoelectric moduli to acoustic resonance frequencies also permit changes in the configuration of ferroelectric domains to be detected in response both to cycling through this transition and to application of a magnetic field. A peak in acoustic loss in the vicinity of 250 K is attributed to strain-mediated pinning/freezing of some aspect of the domain microstructure with an activation energy of ~0.25–0.3 eV. A return to the original elastic properties on heating to temperatures above ~250 K is interpreted in terms of backswitching of domains to the configuration they had at the start. These observations confirm the existence of subtle variations in magnetoelastic coupling behaviour relating to both the magnetic order parameters and magnetic domain structures.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Dislocation dynamics in hexagonal close-packed crystals

Extensions of the dislocation dynamics methodology necessary to enable accurate simulations of crystal plasticity in hexagonal close-packed (HCP) metals are presented. They concern the introduction of dislocation motion in HCP crystals through linear and non-linear mobility laws, as well as the treatment of composite dislocation physics. Formation, stability and dissociation of and other dislocations with large Burgers vectors defined as composite dislocations are examined and a new topological operation is proposed to enable their dissociation. Furthermore, the results of our simulations suggest that composite dislocations are omnipresent and may play important roles both in specific dislocation mechanisms and in bulk crystal plasticity in HCP materials. While fully microscopic, our bulk DD simulations provide wealth of data that can be used to develop and parameterize constitutive models of crystal plasticity at the mesoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Sn 0.24 WO 3 hexagonal tungsten bronze prepared via the metal chloride route

In this work, we report the synthesis of Sn 0.24 WO 3 single crystals via an alternative, less well-known, solid-state synthetic approach that involves the use of tin chloride as a starting material. The compound adopts an unusual variant of the hexagonal tungsten bronze structure in space group P6/mmm (a = 7.4264(7) Å and c = 3.7843(4) Å) with a previously unreported distribution of Sn cations, disordered over two distinct sites in the tunnels. Sn 0.24 WO 3 shows no signs of superconductivity down to 170 mK and exhibits weakly-metallic conducting behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

The 12-layer trimer-based hexagonal perovskite Cs 4 Ca 0.7 Mn 3.3 Cl 12

Here, we describe the crystal structure and basic magnetic properties of Cs 4 Ca 0.7 Mn 3.3 Cl 12 , a previously unreported twelve layer (12L-) hexagonal (R-3m) chloride perovskite. Its crystal structure features face sharing MnCl 6 octahedra that form Mn 3 Cl 12 trimers. The trimers, which form a triangular array, are separated by corner sharing to layers of disordered single Ca(Mn)Cl 6 octahedra. The decreased intratrimer Mn–Mn distance yields stronger magnetic coupling within trimers than between trimers. The dominant magnetic interactions are antiferromagnetic (θ CW = –105 K), the effective magnetic moment per Mn 2+ is 6.5 μ B , and potential signatures of magnetic frustration are observed. Behavior consistent with short- and long-range magnetic order is exhibited at approximately 37 and 0.7 K, respectively.

12L-hexagonal perovskite↗
DOE OSTI2016

A hexagonal close-packed high-entropy alloy: The effect of entropy

The formation of disordered solid solution in the hexagonal close-packed (hcp) structure in the GdHoLaTbY alloy and its mechanical properties were investigated in this study. The single hcp phase of the alloy in the as-cast state was confirmed by X-ray diffraction and scanning electron microscopy analyses. The compressive yield strength, fracture strength, and plastic strain of the alloy are 108 MPa, 880 MPa, and 21.8 %, respectively, and the Vickers hardness is 96 HV. The results show that the yield strength, fracture strength, and hardness of the alloy obey the rule of mixture, which indicates that there is no hardening effect from entropy. Although the high entropy of mixing stabilizes the solid solution against intermetallic compounds, lack of severe lattice distortion from elastic strain or electronic interactions between principal elements impacts little on the mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Microwave absorption behavior and electromagnetic properties of Ni-Zr doped La-Sr hexagonal ferrite synthesized by auto-combustion method

Highlights: • Quantitative analysis of Microwave Absorption for synthesized ferrites. • Maximum absorption was successfully predicted from quarter-wavelength method. • Minimum RL = −25.07 dB with 1.25 GHz bandwidth for composition x = 0.75. • Better gross loss tangent and Microwave Absorption in Ku-band. • Synthesized ferrites can be used as thin or thick sheet of microwave absorber. - Abstract: Strontium hexagonal ferrites with compositional formula Sr{sub 0.85}La{sub 0.15}(NiZr){sub x}Fe{sub 12-2x}O{sub 19}, where ‘x’ varies from 0.00 to 1.00 in steps of 0.25, were synthesized by auto-combustion method. Structural, magnetic, electromagnetic and microwave absorption properties of synthesized ferrites were studied. The vector network analyzer (VNA) was used to measure complex permittivity (ε′–jε′′) and complex permeability (μ′–jμ′′) in X-band (8–12.4 GHz) and Ku-band (12.4–18 GHz) frequency range. The minimum reflection loss curves were obtained using back metal plate method for analyzing absorption properties of the material. All the synthesized ferrites show maximum absorption in Ku-band for sample thickness in the range of 1.6–1.68 mm. These newly synthesized ferrites have great potential to be used as thin microwave absorber sheets with minimum reflection loss values in the range of –19.69 dB to −27.8 dB and bandwidth in the range of 680 MHz–1.25 GHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Comparison of experimental and simulation results on interior subchannels of a 61-pin wire-wrapped hexagonal fuel bundle

As part of a joint U.S. Department of Energy project, Framatome, Argonne National Laboratory, Terrapower, and Texas A&M University have collaborated to produce experimental data and computational results to characterize the flow behavior of a 61-pin wire-wrapped hexagonal fuel bundle. Here, comparisons are made between Texas A&M’s experimental particle image velocimetry velocity field measurements and Argonne National Laboratory’s large-eddy simulation results in an interior subchannel for a Reynolds number of 19,000. It can be concluded that the shape and magnitude of the mean vertical velocity component is in excellent agreement for the selected horizontal line plots. Maximum relative errors are less than 10% until the subchannel walls are approached. Finally, the shape and, to a lesser extent, magnitude of the mean horizontal velocity component is in satisfactory agreement between the particle image velocimetry and large-eddy simulation results.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2019

Chiral response of a twisted bilayer of hexagonal boron nitride

Here, we propose a bilayer structure made of two twisted hexagonal boron nitride (hBN) slabs for realizing tunable chirality in this work. Our numerical results show that a maximum circular dichroism as high as 0.84 can be achieved with the bilayer structure. The chiral response of the proposed structure comes from the combined effects of polarization conversion of circularly polarized wave with the top slab and selective transmission of linearly polarized wave with the bottom slab. Besides, the chirality can be actively controlled by adjusting the optic axis orientation of the top hBN slab. Finally, the bilayer structure is possible to be built with other suitable materials, metamaterials and microstructures for functioning chiral response in different wavebands. Therefore, the results in this work may provide some important hints for the design of novel chiral response sensors for optical, chemical and biological sensing.

42 ENGINEERING↗
DOE OSTI2023

On the co-nucleation of adjoining twin pairs at grain boundaries in hexagonal close-packed materials

Here this work addresses the formation of adjoining twin pairs (ATPs) at grain boundaries (GBs) in hexagonal close-packed (hcp) metals from the perspective of the co-nucleation (CN) of pairs of deformation twins. A continuum defect mechanics model is proposed to investigate the energetic feasibility of the CN of ATPs resulting from the dissociation of GB dislocations. Application of the model to a set of GBs in Mg reveals that CN is largely preferred over the nucleation of a single twin variant for low misorientation angle GBs, which is consistent with previous experimental analyses. The CN events are subsequently analyzed considering the GB character, and the twin system alignment ($m$') and Schmid factors to obtain better insights into the conditions governing the formation of ATPs via CN. The likelihood of CN even at low $m$' values reveals that CN events could be responsible for the formation of ATP pairs in these scenarios.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Chemical Vapor-Deposited Hexagonal Boron Nitride as a Scalable Template for High-Performance Organic Field-Effect Transistors

Organic field-effect transistors have attracted much attention because of their potential use in low-cost, large-area, flexible electronics. High-performance organic transistors require a low density of grain boundaries in their organic films and a decrease in the charge trap density at the semiconductor–dielectric interface for efficient charge transport. In this respect, the role of the dielectric material is crucial because it primarily determines the growth of the film and the interfacial trap density. Here, we demonstrate the use of chemical vapor-deposited hexagonal boron nitride (CVD h-BN) as a scalable growth template/dielectric for high-performance organic field-effect transistors. The field-effect transistors based on C60 films grown on single-layer CVD h-BN exhibit an average mobility of 1.7 cm 2 V –1 s –1 and a maximal mobility of 2.9 cm 2 V –1 s –1 with on/off ratios of 10 7 . The structural and morphology analysis shows that the epitaxial, two-dimensional growth of C 60 on CVD h-BN is mainly responsible for the superior charge transport behavior. In conclusion, we believe that CVD h-BN can serve as a growth template for various organic semiconductors, allowing the development of large-area, high-performance flexible electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nanoscale Electronic Transparency of Wafer-Scale Hexagonal Boron Nitride

We report monolayer hexagonal boron nitride (hBN) has attracted interest as an ultrathin tunnel barrier or environmental protection layer. Recently, wafer-scale hBN growth on Cu(111) was developed for semiconductor chip applications. For basic research and technology, understanding how hBN perturbs underlying electronically active layers is critical. Encouragingly, hBN/Cu(111) has been shown to preserve the Cu(111) surface state (SS), but it was unknown how tunneling into this SS through hBN varies spatially. Here, we demonstrate that the Cu(111) SS under wafer-scale hBN is homogeneous in energy and spectral weight over nanometer length scales and across atomic terraces. In contrast, a new spectral feature-not seen on bare Cu(111)-varies with atomic registry and shares the spatial periodicity of the hBN/Cu(111) moiré. This work demonstrates that, for some 2D electron systems, an hBN overlayer can act as a protective yet remarkably transparent window on fragile low-energy electronic structure below.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Revealing Variable Dependences in Hexagonal Boron Nitride Synthesis via Machine Learning

Wafer-scale monolayer two-dimensional (2D) materials have been realized by epitaxial chemical vapor deposition (CVD) in recent years. To scale up the synthesis of 2D materials, a systematic analysis of how the growth dynamics depend on the growth parameters is essential to unravel its mechanisms. However, the studies of CVD-grown 2D materials mostly adopted the control variate method and considered each parameter as an independent variable, which is not comprehensive for 2D materials growth optimization. Herein, we synthesized a representative 2D material, monolayer hexagonal boron nitride (hBN), on single-crystalline Cu (111) by epitaxial chemical vapor deposition and varied the growth parameters to regulate the hBN domain sizes. Furthermore, we explored the correlation between two growth parameters and provided the growth windows for large flake sizes by the Gaussian process. Here, this new analysis approach based on machine learning provides a more comprehensive understanding of the growth mechanism for 2D materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Phonon-Mediated Quasiparticle Lifetime Renormalizations in Few-Layer Hexagonal Boron Nitride

Understanding the collective behavior of the quasiparticles in solid-state systems underpins the field of non-volatile electronics, including the opportunity to control many-body effects for well-desired physical phenomena and their applications. Hexagonal boron nitride (hBN) is a wide energy bandgap semiconductor, showing immense potential as a platform for lowdimensional device heterostructures. It is an inert dielectric used for gated devices, having a negligible orbital hybridization when placed in contact with other systems. Despite its inertness, we discover a large electron mass enhancement in few-layer hBN affecting the lifetime of the π-band states. We show that the renormalization is phonon-mediated and consistent with both single- and multiple-phonon scattering events. Our findings thus unveil a so-far unknown many-body state in a wide-bandgap insulator, having important implications for devices using hBN as one of their building blocks.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Scalable Bottom-Up Synthesis of Nanoporous Hexagonal Boron Nitride ( h -BN) for Large-Area Atomically Thin Ceramic Membranes

Nanopores embedded within monolayer hexagonal boron nitride (h-BN) offer possibilities of creating atomically thin ceramic membranes with unique combinations of high permeance (atomic thinness), high selectivity (via molecular sieving), increased thermal stability, and superior chemical resistance. However, fabricating size-selective nanopores in monolayer h-BN via scalable top-down processes remains nontrivial due to its chemical inertness, and characterizing nanopore size distribution over a large area remains extremely challenging. Here, we demonstrate a facile and scalable approach of exploiting the chemical vapor deposition (CVD) process temperature to enable direct incorporation of subnanometer/nanoscale pores into the monolayer h-BN lattice, in combination with manufacturing compatible polymer casting to fabricate centimeter-scale nanoporous atomically thin ceramic membranes. We leverage diffusive transport of analytes including size-selective Ficoll sieving to characterize subnanometer-scale and nanoscale defects that manifest as pores in centimeter-scale h-BN membranes, overcoming previous limitations in large-area characterization of nanoscale defects in h-BN. Our approach opens a new frontier to advance atomically thin membranes to 2D ceramic materials, such as h-BN via facile and direct formation of nanopores, for size-selective separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Subterahertz Spin Relaxation Dynamics of Boron-Vacancy Centers in Hexagonal Boron Nitride

Quantum sensors based on spin defects have become powerful tools for detecting faint magnetic signals, yet their operation remains confined to low magnetic fields and gigahertz frequencies. Extending such sensors into high-field (>0.3 T) and subterahertz regimes would enable quantum metrology across a wide range of electromagnetic phenomena and scientific applications, but has proven challenging. Here, we demonstrate that negatively charged boron vacancies ($V^−_B$) in hexagonal boron nitride can function as relaxation-based quantum sensors operating up to 0.2 terahertz and 7 T fields. Their uniform spin-orientation and persistent spin-contrast at high fields enable measurement of intrinsic spin relaxation across unexplored field regimes. We reveal a crossover in relaxation behavior, initially decreasing at low fields before rising at higher fields, consistent with the emergence of single-phonon-induced resonant noise at subterahertz frequencies. These results establish $V^−_B$ centers as a versatile platform for quantum sensing in the subterahertz, high-field regime.

boron-vacancies↗
DOE OSTI2025

Growth of Hexagonal Boron Nitride from Molten Nickel Solutions: A Reactive Molecular Dynamics Study

Metal flux methods are excellent for synthesizing high-quality hexagonal boron nitride (hBN) crystals, but the atomic mechanisms of hBN nucleation and growth in these systems are poorly understood and difficult to probe experimentally. Here, we harness classical reactive molecular dynamics (ReaxFF) to unravel the mechanisms of hBN synthesis from liquid nickel solvent over time scales up to 30 ns. These simulations mimic experimental conditions by including relatively large liquid nickel slabs containing dissolved boron and a molecular nitrogen gas phase. Overall, the reaction takes place almost exclusively on the surface of the liquid nickel, owing to the low solubility of nitrogen in bulk nickel and the intermediate species’ preference for the metal–gas interface. The formation of hBN invariably begins by reaction of dinitrogen with nickel-solvated boron atoms at the surface, forming intermediate N–N–B species, which typically evolve into B–N–B units through a short-lived intermediate where a single nitrogen atom is coordinated by one nitrogen and two boron atoms. The resulting B–N–B units, in turn, coalesce with growing hBN nuclei and carry nitrogen between hBN nanocrystals in an Ostwald ripening process. The amount of hBN produced on the tens of nanosecond time scale depends critically on the boron concentration, while having a much weaker dependence on the N 2 pressure for the regime considered (N 2 pressures of 2.5–10 MPa, Ni–B solutions with 6–12% boron by atom fraction). The highest rate of hBN formation occurs at the lowest temperature considered (1750 K, just above the melting point of nickel), while no hBN sheets are formed at 2000 K or above. An analysis of the transition pathways for nitrogen atoms shows that the final step, incorporation of small B–N motifs into larger hBN sheets, is the rate-limiting step in the regimes considered. While raising the temperature from 1750 to 2000 K has little effect on the formation of intermediates (N–N–B, B–N–B, etc.), the lack of large hBN sheets at temperatures >1900 K is explained by decreased probability of the final step and increased probability of breakup of hBN into B–N motifs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Dynamics of Radiation Damage Buildup in Ultrathin Hexagonal Boron Nitride Films under Ion Bombardment

Two-dimensional hexagonal boron nitride (hBN) is attractive for several emerging applications. Ion bombardment can be used to modify the hBN properties. However, the understanding of radiation damage buildup in hBN remains limited. Here, we investigate the effects of the dose rate and ion mass on radiation damage buildup by studying 40 nm-thick hBN films bombarded at room temperature with 500 keV 4 He, 15 N, 40 Ar, and 129 Xe ions and comparing with results for ion bombardment of polycrystalline hBN ceramics. Raman spectroscopy is used to quantify damage buildup, and transmission electron microscopy is used for microstructural analysis. Experiments are complemented by molecular dynamics simulations of the formation and evolution of point defects. Lighter ions are found to be more efficient at disordering hBN than heavier ions. This observation points to a critical role of intracascade defect processes. In contrast, a negligible dose rate effect observed suggests limited intercascade defect dynamic annealing processes for these irradiation conditions. These findings provide a fundamental basis for hBN defect engineering.

2D materials↗