Pseudosymmetry in Tetragonal Perovskite SrIrO 3 Synthesized under High Pressure
Not Available
36 MATERIALS SCIENCE↗
SEARCH · Search NASA
Results for “high-pressure”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Pressure-Dependent Phase Behavior of Chemically Synthesized Ytterbium Hydride Nanoparticles and Confinement in CMK-3
In this work, we developed a chemical synthesis protocol to prepare both spherical and rod shaped YbH x nanoparticles and infiltrate a mesoporous CMK-3 structure with YbH x nanoparticles. The phase evolution of the YbH x nanoparticles was monitored as a function of the pressure in a diamond anvil cell. The cell volume of the Yb atom showed an unexpected positive deviation from the calculated equation of state (EoS) for the α-phase (space group Pnma) of YbH x . Additionally, the β-phase (space group Fm3̅m) YbH x nanoparticles appeared to become amorphous at approximately 27 GPa, although the same behavior was not observed in the Pnma (α-phase). The Pmna phase remained stable (measured up to 59.3 GPa) and showed a significantly higher than expected volume per Yb atom relative to the calculated EoS. This deviation could be attributed to the nanoscale effect on the thermodynamics of ytterbium hydride formation, which could provide a path forward to accessing higher order ytterbium hydrides (YbH x , x > 3) at pressures much lower than in the bulk metal.
diamond anvil cell↗
Thermodynamic origin of the pressure-induced Invar effect: General criterion and experimental study of Fe 68 Pd 32
Synchrotron X-ray diffraction measurements were performed on 57 Fe 68 Pd 32 at multiple pressures and two temperatures in a diamond-anvil cell. Between 4 and 11GPa, the thermal expansion was zero or slightly negative. This pressure-induced Invar effect was studied further with 57 Fe nuclear forward scattering and nuclear resonant inelastic X-ray scattering to obtain information on the pressure-induced changes in both the magnetization and the phonon density of states. Magnetic entropy and phonon entropy were obtained from these results, the latter with additional measurements from inelastic neutron scattering to account for the contributions from Pd atoms. The dependencies of these entropies on pressure gave the magnetic and phonon contributions to thermal expansion. These canceled in the region of pressure-induced Invar behavior, even though they individually increased by more than a factor of 2 below the Curie pressure. The behavior of phonons gives evidence for spin-phonon interactions in Fe 68 Pd 32 . A general explanation of the pressure-induced Invar effect is presented, showing that Invar behavior is typically expected at a pressure P* below a magnetic transition at pressure PC. The difference in pressure P C − P* scales with the fractional reduction in magnetic exchange interaction divided by the average Gr¨uneisen parameter.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Pressure suppresses the density wave order in kagome metal LuNb 6 Sn 6
The density waves that develop in kagome metals ScV 6 Sn 6 and LuNb 6 Sn 6 at low temperature appear to arise from underfilled atomic columns within a V-Sn or Nb-Sn scaffolding. Compressing this network with applied pressure in ScV 6 Sn 6 suppressed the structural transition temperature by constraining atomic rattling and inhibiting the shifts that define the structural modulation. We predicted that the density wave transition in LuNb 6 Sn 6 at 68 K would be suppressed by pressure as well. In this Letter, we examine the pressure dependence of the density wave transition by measuring resistance vs temperature up to 2.26 GPa. We found the transition temperature is smoothly depressed and disappears around 1.9 GPa. In conclusion, this result not only addresses our prediction, but strengthens the rattling chains origin of structural instabilities in the HfFe 6 Ge 6 -type kagome metals.
Charge density waves↗
First-principles simulation of a shocked H-He mixture along the principal Hugoniot
Recent laser-shock experiments on an H–He mixture containing 11% helium (atomic fraction) have suggested the presence of an immiscibility region inside Jupiter. Reflectivity measurements were used as the primary diagnostic of H–He demixing, with discontinuities in the optical reflectivity proposed as a signature of phase separation under conditions relevant to Jupiter's interior. Here, we investigate shock-compressed H–He using ab initio molecular dynamics simulations with optical properties evaluated within the Kubo–Greenwood formalism. The equation of state and ionic configurations were obtained using the thermal Tr 2 SCANL meta-GGA exchange–correlation (XC) functional, while optical properties were computed using the recently developed RS-KDT0 range-separated thermal hybrid XC, which provides state-of-the-art accuracy for band-gap predictions in the warm dense matter regime. The calculated reflectivity shows overall good agreement with experimental measurements; however, no discontinuity is observed at elevated temperatures. Moreover, the reflectivity predictions for the mixed system are consistent with the experimental measurements in the temperature range where the mixture is inferred to be demixed. Furthermore, these results suggest that reflectivity alone may not provide a unique or sensitive diagnostic of H–He demixing at low helium concentrations under these conditions.
Density functional calculations↗
Refractive index of lithium fluoride at high dynamic stresses
Alkali halides are prototypical ionic solids whose refractive index is a fundamental property related to their lattice structure and ionic polarizability. In particular, lithium fluoride (LiF) has the largest band gap of any known transparent material and maintains transparency at high pressures, making it well suited for use as an optical window in dynamic compression experiments. While empirical fits to the measured density dependence of the refractive index have been provided, a model that is valid over the entire pressure range of experiments and based on a polarization-based theoretical description is lacking. We present a refractive index model for dynamically compressed LiF based on the Lorentz-Lorenz equation, where the molecular polarizability is determined using a single oscillator model with a strain polarizability parameter Λ=0.73. Here, we show that our modeling approach provides an excellent match to the LiF refractive index data for both shock and ramp compression experiments to 900 GPa (density compression greater than threefold). Additionally, updated fits are provided to determine the refractive index correction for LiF windows used in dynamic compression experiments.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Effect of low-temperature compression on superconductivity and crystal structure in strontium metal
The superconducting and structural properties of elemental strontium metal were investigated under pressures up to 60 GPa while maintaining cryogenic conditions during pressure application. Applying pressure at low temperatures reveals differences in superconducting and structural phases compared to previous reports obtained at room temperatures. Notably, the superconducting critical temperature exhibits a twofold increase under compression after cryogenic cooling within the pressure range of 35–42 GPa, compared to cryogenic cooling after room-temperature compression. Subsequently, the transition width becomes significantly sharper above 42 GPa. Low-temperature x-ray diffraction measurements under pressure reveal that this change corresponds to the Sr-III to Sr-IV transition, with no evidence of any metastable structure. Furthermore, the monoclinic Sr-IV structure was observed to remain stable to much higher pressures—at least up to 60 GPa, without the appearance of the incommensurate Sr-V phase present at room temperature. As a result, this implies that thermal activation energy plays an important role in overcoming the presence of a kinetic barrier to the Sr-V phase at room temperature.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Electronic topological transitions in cadmium under pressure studied via theoretical and experimental x-ray absorption spectroscopy
Here, an electronic topological transition (ETT) in cadmium below 1 GPa is investigated in situ with experimental x-ray absorption spectroscopy and projecting calculated core-valence excitons onto the band structure. These projections are a useful application of the Bethe-Salpeter equation approach that considers many-body effects. The method described herein can be used for systems that are otherwise difficult to probe in situ; therefore, it provides a generalizable approach to identifying and understanding ETTs under high pressure. Although pressure-induced ETTs are often probed using indirect structural responses, our own x-ray diffraction and Raman studies suggest a second-order structural transition around 3 GPa but are largely insensitive to or inconclusive for the previously studied ETT in this region.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Pressure-induced metallization and loss of surface magnetism in FeSi
Single-crystalline FeSi samples with a conducting surface state were studied under high pressure and magnetic field by means of electrical resistance measurements to explore how the bulk semiconducting state and the surface state are tuned by the application of pressure. Here, we found that the energy gap associated with the semiconducting bulk phase begins to close abruptly at a critical pressure of ~10 GPa and the bulk material becomes metallic with no obvious sign of any emergent phases or non-Fermi liquid behavior in temperature dependent electrical resistance in the neighborhood of the critical pressure above 3 K. Moreover, the metallic phase appears to remain at near-ambient pressure upon release of the pressure. Interestingly, the hysteresis in the electrical resistance vs magnetic field curve associated with the magnetically ordered conducting surface state decreases with pressure and vanishes at the critical pressure, while the slope of the electrical resistance vs magnetic field curve, which has a negative value for pressure below the critical pressure, decreases in magnitude with pressure and changes sign at the critical pressure. Thus the conducting surface state and the corresponding two-dimensional magnetic order collapse at the critical pressure where the energy gap of the bulk material starts to close abruptly, revealing the connection between the conducting surface state and the semiconducting bulk state in FeSi.
36 MATERIALS SCIENCE↗
Lithium's low-temperature phase transitions: Insights into quantum lattice dynamics and superconductivity
The large lattice dynamics of lithium, driven by its low atomic mass, results in energetically similar structures and significant isotope effects under pressure, posing challenges to current theoretical models. Above 20 GPa and at low temperatures, lithium's electronic properties deviate from simple metallic behavior, with superconductivity emerging in a complex, pressure-dependent manner, alongside an unusual isotope effect. The structural phases of 7 Li reported under these conditions are inconsistent across studies, and the structures of 6 Li remain unexamined. These gaps limit our understanding of the effects of pressure on lithium's electronic properties and the role of quantum lattice effects on its structural behavior under pressure. Here, we integrate experimental and theoretical approaches to investigate the low-temperature structural phase boundaries in lithium isotopes. We map the structural phase diagram of 7 Li from 5 to 55 GPa and 15–75 K, identifying the sequence fcc → ℎR1 → cI16. A pronounced isotope effect is observed, with 6 Li shifting the fcc → ℎR1 phase boundary to lower pressures at 15 K. Density functional theory calculations further clarify how these structural changes affect superconducting properties, particularly emphasizing the role of the fcc → ℎR1 transition in lithium's superconductivity. Furthermore, our findings offer insights into the unique behavior of lithium isotopes under pressure.
36 MATERIALS SCIENCE↗
Low fractional volume superconductivity in single crystals of Pr{sub 4}Ni{sub 3}O{sub 10} under pressure
Magnetotransport measurements of Pr4Ni3O10 single crystals performed under externally applied pressures up to 73 GPa in diamond anvil cells with either KBr or Nujol oil as pressure media yield signatures of superconductivity with a maximum onset temperature of approximately 31 K. True zero resistance was not observed, consistent with a nonpercolating superconducting volume fraction. Magnetization measurements provided corroborating evidence of superconductivity, with a pressure-dependent diamagnetic signal occurring below the onset temperature, and an estimate from the absolute value of the susceptibility suggests a superconducting volume fraction on the order of 10%. We observe sample to sample variations in the magnitude and pressure dependence of 𝑇𝑐 as well as a dependence on the configuration of electrical contacts on a given sample. Possible causes of this behavior may be significant inhomogeneities in the pressure and/or damage to the samples induced by the pressure media as well as inhomogeneities in the crystals themselves. The results imply that our as-grown Pr4Ni3O10 single crystals are not bulk superconductors but that there is a minority structure present within the crystals that is indeed superconductin
Chen, Xinglong↗
Melting curves of atomic hydrogen and deuterium calculated using path-integral Monte Carlo
We calculate the melting line of atomic hydrogen and deuterium up to 900 GPa with path-integral Monte Carlo using a machine-learned interatomic potential. We improve upon previous simulations of melting by treating the electrons with reptation quantum Monte Carlo, and by performing solid and liquid simulations using isothermal-isobaric path-integral Monte Carlo. Here, the resulting melting line for atomic hydrogen is higher than previous estimates. There is a small but resolvable decrease in the melting temperature as pressure is increased, which can be attributed to quantum effects.
08 HYDROGEN↗
Superconducting dome and structural changes in LaRu 3 Si 2 under pressure
LaRu 3 Si 2 is of current research interest as a kagome metal with a superconducting transition temperature, 𝑇 𝑐 ∼7 K, and higher-temperature charge density wave orders. Here we report on electrical transport and x-ray diffraction measurements on LaRu 3 Si 2 under pressure up to 65 GPa and 35 GPa, respectively. The superconducting transition temperature 𝑇 𝑐 first gets slightly enhanced and reaches a maximum ∼8.7 K at ∼8.5 GPa. With further applied pressure, 𝑇 𝑐 is initially gradually suppressed, then more rapidly suppressed, followed by gradual suppression, revealing a superconducting dome. Two possible pressure-induced structural phase transitions are also observed at room temperature, from the original hexagonal phase to another hexagonal structure above ∼11.5 GPa, and further to a structure with lower symmetry above ∼23.5 GPa. These transition pressures roughly correlate with features found in our pressure-dependent transport data.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Giant Negative Linear Compressibility in Orthorhombic Copper Cyanide
Most reported negative linear compressibility (NLC) materials exhibit either a small NLC over a large pressure range or a high NLC over a very small pressure range. Here, we report the remarkable discovery of giant NLC in the low-temperature form of CuCN (LT-CuCN) over an unusually large pressure range. High- pressure XRD studies on LT-CuCN observed the NLC of –20.5 TPa –1 along the a axis at zero pressure, and the ambient orthorhombic phase remained stable up to 9.8 GPa. Pressure- and temperature-dependent Raman studies identified the phonon vibrations responsible for NLC and negative thermal expansion (NTE).
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Thermally induced structural competitiveness and metastability of body-centered-cubic iron under nonequilibrium conditions
The structure and stability of iron near melting at multi-megabar pressures are of significant interest in high pressure physics and earth and planetary sciences. While the body-centered cubic (BCC) phase is generally recognized as unstable at lower temperatures, its stability relative to the hexagonal close-packed (HCP) phase at high temperatures (approximately 0.5 eV) in the Earth’s inner core (IC) remains a topic of ongoing theoretical and experimental debate. Motivated by a series of studies attempting to understand the state of the IC and resulting in contradictory findings, we aim to explore the physical factors that may contribute to this confusion in a broader context. Our ab initio calculations show a significant drop in energy, the emergence of a plateau and a local minimum in the potential energy surface, and stabilization of all phonon modes of BCC iron at elevated electron temperatures (>1–1.5 eV). These effects increase the competition among the BCC, HCP, and the face-centered cubic (FCC) phases and lead to the metastability of the BCC structure. Furthermore, at pressure-temperature conditions relevant to the IC, we can expect substantial coexistence of FCC and HCP iron due to their similar free energies and low transition barrier (∼0.2 eV/atom), and the thermodynamic stability of BCC iron is enhanced by its substantial lattice vibration entropy. In conclusion, these findings provide a clear theoretical framework for understanding iron phase relations and solidification processes, both experimentally and in the IC.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Body-Centered-Cubic Phase Transformation in Gold at TPa Pressures
In situ x-ray diffraction at both the National Ignition Facility and Omega-EP Laser Facility has been utilized to determine the crystallographic state of ramp and shock-ramp compressed gold up to 1.2 TPa (1 TPa=10 Mbar = 10 × 10 6 atmospheres). In this Letter, we describe a series of experiments that explore a variety of pressure-temperature states in Au, accessed using tailored laser pulses. Here, we find that the ambient pressure face-centered-cubic phase is stable under ramp compression to pressures of at least 1 TPa where the body-centered-cubic phase is observed simultaneously.
High-pressure studies↗
The varying temperature- and pressure-induced phase transition pathways in hybrid improper ferroelectric Sr 3 Sn 2 O 7
A variable-temperature and pressure single-crystal diffraction study of hybrid improper ferroelectric Sr 3 Sn 2 O 7 is reported. In combination with symmetry analysis, we reveal that the application of pressure and temperature induce distinct phase transition pathways, driven by a differing response of the octahedral rotations to these stimuli. Contrary to what has been previously predicted, we observe the ferroelectric to paraelectric phase transition between 10.17(18) and 12.13(14) GPa, meaning the hybrid improper ferroelectric phase remains stable to significantly higher pressures than expected.
Ferroelectrics↗
Toyota Highlander FCHV (CRADA CRD-12-00469 Final Report)
This project relates to the loan of four Toyota Mirai FCEV-adv vehicles to NLR to provide a load (vehicles to fill with hydrogen) to our fueling station research facility to study hydrogen fueling infrastructure performance using 700 bar precooled hydrogen at ESIF’s Hydrogen Infrastructure Testing and Research Facility (HITRF) facility.
33 ADVANCED PROPULSION SYSTEMS↗