SEARCH · Search NASA

Results for “hyperbolic problems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS1997

The Local Discontinuous Galerkin Method for Time-Dependent Convection-Diffusion Systems

In this paper, we study the Local Discontinuous Galerkin methods for nonlinear, time-dependent convection-diffusion systems. These methods are an extension of the Runge-Kutta Discontinuous Galerkin methods for purely hyperbolic systems to convection-diffusion systems and share with those methods their high parallelizability, their high-order formal accuracy, and their easy handling of complicated geometries, for convection dominated problems. It is proven that for scalar equations, the Local Discontinuous Galerkin methods are L(sup 2)-stable in the nonlinear case. Moreover, in the linear case, it is shown that if polynomials of degree k are used, the methods are k-th order accurate for general triangulations; although this order of convergence is suboptimal, it is sharp for the LDG methods. Preliminary numerical examples displaying the performance of the method are shown.

Cockburn, Bernardo↗

NASA NTRS1972

Finite element analysis of elasto-plastic soils. Report no. 4: Finite element analysis of elasto-plastic frictional materials for application to lunar earth sciences

The behavior of finite element models employing different constitutive relations to describe the stress-strain behavior of soils is investigated. Three models, which assume small strain theory is applicable, include a nondilatant, a dilatant and a strain hardening constitutive relation. Two models are formulated using large strain theory and include a hyperbolic and a Tresca elastic perfectly plastic constitutive relation. These finite element models are used to analyze retaining walls and footings. Methods of improving the finite element solutions are investigated. For nonlinear problems better solutions can be obtained by using smaller load increment sizes and more iterations per load increment than by increasing the number of elements. Suitable methods of treating tension stresses and stresses which exceed the yield criteria are discussed.

Marr, W. A., Jr.↗

NASA NTRS1976

Conformal coordinates associated with uniformly accelerated motion

Specific problems in the theory of relativity are often simplified by an appropriate choice of the coordinate system. Restricted conformal coordinates provide an especially simple analysis of motion with uniform acceleration, known as hyperbolic motion. Conformal coordinates x', t' may be obtained from Cartesian coordinates x, t by the transformation x'+ct'=F(x+ct) and x'-ct'=G(x-ct), where c is the velocity of light. A variable motion of the x' system is determined by the choice of the functions F and G.

Jones, R. T.↗

NASA NTRS1982

An approximation theory for nonlinear partial differential equations with applications to identification and control

Approximation results from linear semigroup theory are used to develop a general framework for convergence of approximation schemes in parameter estimation and optimal control problems for nonlinear partial differential equations. These ideas are used to establish theoretical convergence results for parameter identification using modal (eigenfunction) approximation techniques. Results from numerical investigations of these schemes for both hyperbolic and parabolic systems are given.

Banks, H. T.↗

NASA NTRS1990

Numerical methods for systems of conservation laws of mixed type using flux splitting

The essentially non-oscillatory (ENO) finite difference scheme is applied to systems of conservation laws of mixed hyperbolic-elliptic type. A flux splitting, with the corresponding Jacobi matrices having real and positive/negative eigenvalues, is used. The hyperbolic ENO operator is applied separately. The scheme is numerically tested on the van der Waals equation in fluid dynamics. Convergence was observed with good resolution to weak solutions for various Riemann problems, which are then numerically checked to be admissible as the viscosity-capillarity limits. The interesting phenomena of the shrinking of elliptic regions if they are present in the initial conditions were also observed.

Shu, Chi-Wang↗

NASA NTRS1993

Selected computations of transonic cavity flows

An efficient diagonal scheme implemented in an overset mesh framework has permitted the analysis of geometrically complex cavity flows via the Reynolds averaged Navier-Stokes equations. Use of rapid hyperbolic and algebraic grid methods has allowed simple specification of critical turbulent regions with an algebraic turbulence model. Comparisons between numerical and experimental results are made in two dimensions for the following problems: a backward-facing step; a resonating cavity; and two quieted cavity configurations. In three-dimensions the flow about three early concepts of the stratospheric Observatory For Infrared Astronomy (SOFIA) are compared to wind-tunnel data. Shedding frequencies of resolved shear layer structures are compared against experiment for the quieted cavities. The results demonstrate the progress of computational assessment of configuration safety and performance.

Atwood, Christopher A.↗

NASA NTRS1993

On the global dynamics of adaptive systems - A study of an elementary example

The inherent nonlinear character of adaptive systems poses serious theoretical problems for the analysis of their dynamics. On the other hand, the importance of their dynamic behavior is directly related to the practical interest in predicting such undesirable phenomena as nonlinear oscillations, abrupt transients, intermittence or a high sensitivity with respect to initial conditions. A geometrical/qualitative description of the phase portrait of a discrete-time adaptive system with unmodeled disturbances is given. For this, the motions in the phase space are referred to normally hyperbolic (structurally stable) locally invariant sets. The study is complemented with a local stability analysis of the equilibrium point and periodic solutions. The critical character of adaptive systems under rather usual working conditions is discussed. Special emphasis is put on the causes leading to intermittence. A geometric interpretation of the effects of some commonly used palliatives to this problem is given. The 'dead-zone' approach is studied in more detail. The predicted dynamics are compared with simulation results.

Espana, Martin D.↗

NASA NTRS1975

The powered swingby and its application to Jupiter orbit mission design

This paper is a description of recent studies of constrained optimal transfer between given hyperbolic asymptotes with an emphasis on the practical aspects of the concept for powered Galilean satellite swingby Jupiter orbit insertion. The effects of orbital inclination on performance gain are discussed and the targeting problem for establishing the optimal swingby is solved. Comparisons of some candidate mission profiles are presented and the advantages and disadvantages of the powered swingby orbit insertion are discussed in the context of recent interactions with the scientific community on the relative merits of several mission profiles now under consideration.

Uphoff, C.↗

NASA NTRS1989

Advances in fluid dynamics

Various papers on advances in fluid dynamics are presented. Individual topics addressed include: nonunique solutions of the Euler equations; numerical solution of the biharmonic equation using a spectral multigrid method; finite-volume shape and placement for efficiency, accuracy, and physics; NND schemes and their application to numerical simulation of complex plume flow problems; symbolic analysis and computational algorithm construction; and velocity and mass flux distribution measurements of spherical glass beads in air flow in a 90-deg vertical-to-horizontal bend. Also discussed are: hyperbolic solution adaptive mesh generation; progress and future directions in CFD; numerical simulation of shock focusing; microbubble formation and splitting in a turbulent boundary layer for turbulence reduction; numerical study of spherical Taylor-Couette flow, trajectories of vortex lines beneath a free surface or above a plane; and a mathematical model for response of the coronary circulation to high sustained gravitational force fields.

Ballhaus, W. F., Jr.↗

NASA NTRS2006

Model Predictive Optimal Control of a Time-Delay Distributed-Parameter Systems

This paper presents an optimal control method for a class of distributed-parameter systems governed by first order, quasilinear hyperbolic partial differential equations that arise in many physical systems. Such systems are characterized by time delays since information is transported from one state to another by wave propagation. A general closed-loop hyperbolic transport model is controlled by a boundary control embedded in a periodic boundary condition. The boundary control is subject to a nonlinear differential equation constraint that models actuator dynamics of the system. The hyperbolic equation is thus coupled with the ordinary differential equation via the boundary condition. Optimality of this coupled system is investigated using variational principles to seek an adjoint formulation of the optimal control problem. The results are then applied to implement a model predictive control design for a wind tunnel to eliminate a transport delay effect that causes a poor Mach number regulation.

Nguyen, Nhan↗

NASA NTRS1981

Secondary concentrators for parabolic dish solar thermal power systems

A variety of different concepts are currently being studied with the objective to lower the cost of parabolic mirrors and to provide alternatives. One of the considered approaches involves the use of compound concentrators. A compound solar concentrator is a concentrator in which the sunlight is reflected or refracted more than once. It consists of a primary mirror or lens, whose aperture determines the amount of sunlight gathered, and a smaller secondary mirror or lens. Additional small optical elements may also be incorporated. The possibilities and problems regarding a use of compound concentrators in parabolic dish systems are discussed. Attention is given to concentrating secondary lenses, secondary imaging and concentrating mirrors, conical secondary mirrors, compound elliptic secondary concentrating mirrors, and hyperbolic trumpet secondary concentrating mirrors.

Jaffe, L. D.↗

NASA NTRS1983

A least squares finite element scheme for transonic flow around harmonically oscillating airfoils

The present investigation shows that a finite element scheme with a weighted least squares variational principle is applicable to the problem of transonic flow around a harmonically oscillating airfoil. For the flat plate case, numerical results compare favorably with the exact solution. The obtained numerical results for the transonic problem, for which an exact solution is not known, have the characteristics of known experimental results. It is demonstrated that the performance of the employed numerical method is independent of equation type (elliptic or hyperbolic) and frequency. The weighted least squares principle allows the appropriate modeling of singularities, which such a modeling of singularities is not possible with normal least squares.

Cox, C. L.↗

NASA NTRS1993

Spectral solution of the viscous blunt-body problem

The viscous blunt-body problem is solved with a shock-fitted Chebyshev spectral method. No explicit artificial viscosity or filtering is needed to obtain smooth, converged solutions. The method is applied to two problems. First, results for the flow over a right circular cylinder in the Mach number range of 5.5-6.0 are compared with experimental data. Second, a solution for a Mach 25 flow over a hyperbolic cone is compared with a viscous shock-layer calculation.

Kopriva, David A.↗

NASA NTRS2002

The Overgrid Interface for Computational Simulations on Overset Grids

Computational simulations using overset grids typically involve multiple steps and a variety of software modules. A graphical interface called OVERGRID has been specially designed for such purposes. Data required and created by the different steps include geometry, grids, domain connectivity information and flow solver input parameters. The interface provides a unified environment for the visualization, processing, generation and diagnosis of such data. General modules are available for the manipulation of structured grids and unstructured surface triangulations. Modules more specific for the overset approach include surface curve generators, hyperbolic and algebraic surface grid generators, a hyperbolic volume grid generator, Cartesian box grid generators, and domain connectivity: pre-processing tools. An interface provides automatic selection and viewing of flow solver boundary conditions, and various other flow solver inputs. For problems involving multiple components in relative motion, a module is available to build the component/grid relationships and to prescribe and animate the dynamics of the different components.

Chan, William M.↗

NASA NTRS1975

Accurate integration of geostationary orbits with Burdet's focal elements

The theory of Burdet's focal elements (1969) is outlined. The differential equations are presented, and the initial value problem is described together with the transformation to rectangular coordinates and classical elements. The focal elements are well defined for zero eccentricity and inclination and can be adopted for the computation of elliptic, parabolic, and hyperbolic motion. For the numerical integration of near-geostationary orbits, a comparison of the efficiency is made between focal elements, Kustaanheimo-Stiefel (1971) theory, and rectangular coordinates. For this class of orbits, a higher accuracy has been obtained by integrating elements than integrating rectangular coordinates.

Flury, W.↗

NASA NTRS1988

A study of numerical methods for hyperbolic conservation laws with stiff source terms

The proper modeling of nonequilibrium gas dynamics is required in certain regimes of hypersonic flow. For inviscid flow this gives a system of conservation laws coupled with source terms representing the chemistry. Often a wide range of time scales is present in the problem, leading to numerical difficulties as in stiff systems of ordinary differential equations. Stability can be achieved by using implicit methods, but other numerical difficulties are observed. The behavior of typical numerical methods on a simple advection equation with a parameter-dependent source term was studied. Two approaches to incorporate the source term were utilized: MacCormack type predictor-corrector methods with flux limiters, and splitting methods in which the fluid dynamics and chemistry are handled in separate steps. Various comparisons over a wide range of parameter values were made. In the stiff case where the solution contains discontinuities, incorrect numerical propagation speeds are observed with all of the methods considered. This phenomenon is studied and explained.

Leveque, R. J.↗

DOE OSTI2024

Stochastic finite volume method for uncertainty quantification of transient flow in gas pipeline networks

We develop a weakly intrusive framework to simulate the propagation of uncertainty in solutions of generic hyperbolic partial differential equation systems on graph-connected domains with nodal coupling and boundary conditions. The method is based on the Stochastic Finite Volume (SFV) approach and can be applied for uncertainty quantification (UQ) of the dynamical state of fluid flow over actuated transport networks. The numerical scheme has specific advantages for modeling intertemporal uncertainty in time-varying boundary parameters, which cannot be characterized by strict upper and lower (interval) bounds. We describe the scheme for a single pipe, and then formulate the controlled junction Riemann problem (JRP) that enables the extension to general network structures. In conclusion, we demonstrate the method's capabilities and performance characteristics using a standard benchmark test network.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2017

A Revisit to the Hicks' Hyperbolic Two-pressure Two-phase Flow Model

Hicks’ two-phase flow model represents one of the earliest hyperbolic two-pressure two-phase flow models developed in the early 1980s. This model was developed under the separated flow condition, but could be potentially generalized for more realistic flow conditions that are of interest to reactor safety analysis (e.g., bubbly flow). This model is mathematically hyperbolic and therefore well- posed, as eigenvalues from the characteristic analysis found to be all real. Many currently popular two-pressure models are formulated similarly to Hicks’ two-pressure model, with the inclusion of a void fraction transport equation. The void fraction transport equation is closed using the knowledge of transverse velocity on the two-phase interface, which is assumed to be the solution of a Riemann problem in the transverse direction. Numerical experiments on two phenomenological test problems, i.e., the two-phase water faucet problem and the sedimentation problem, were performed using the Hicks’ model, as well as the single-pressure two-phase flow model. Numerical results demonstrate that the channel size, which appears in the void fraction transport equation, has significant impact on the behavior of the Hicks’ model. By comparing to single-pressure model results and available analytical solutions, it was found that Hicks’ model with very small channel width behaves similarly to the single-pressure model. On the contrary, Hicks’ model with large channel width, however, constantly leads to unphysical liquid-phase pressure. These numerical experiments indicate that using the Riemann problem to close the equation system in Hicks’ derivation might be a questionable approach. Further investigations are necessary to explore different approaches that will properly close the equation system without leading to unphysical behaviors.

42 ENGINEERING↗