Search NASA⌕ Search

SEARCH · Search NASA

Results for “imaging radar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Shuttle imaging radar views the Earth from Challenger: The SIR-B experiment

In October 1984, SIR-B obtained digital image data of about 6.5 million km2 of the Earth's surface. The coverage is mostly of selected experimental test sites located between latitudes 60 deg north and 60 deg south. Programmed adjustments made to the look angle of the steerable radar antenna and to the flight attitude of the shuttle during the mission permitted collection of multiple-incidence-angle coverage or extended mapping coverage as required for the experiments. The SIR-B images included here are representative of the coverage obtained for scientific studies in geology, cartography, hydrology, vegetation cover, and oceanography. The relations between radar backscatter and incidence angle for discriminating various types of surfaces, and the use of multiple-incidence-angle SIR-B images for stereo measurement and viewing, are illustrated with examples. Interpretation of the images is facilitated by corresponding images or photographs obtained by different sensors or by sketch maps or diagrams.

Ford, J. P.↗

Segmentation of multifrequency polarimetric radar images to facilitate the inference of geophysical parameters

An unsupervised clustering algorithm is used to segment multifrequency polarimetric radar data from the NASA/JPL airborne SAR (synthetic aperture radar). Twenty-two parameters are evaluated for their discriminatory capability for each pixel of an image. A clustering analysis is then performed using different subsets of these parameters. This analysis relies on data taken as part of an intensive field experiment during the summer of 1988 in the vicinity of the Pisgah lava flow in the Mojave Desert in southern California. As part of the experiment, extensive ground truth was acquired, including dielectric constant and topography measurements. Segmentation results show good agreement with these measurements.

Burnette, C F.↗

Tradeoffs among several synthetic aperture radar image quality parameters - Results of a user survey study

The imagery obtained with the aid of synthetic aperture radars (SAR) has been applied to several remote sensing disciplines such as geologic feature mapping, oceanic phenomena studies, and land use and urban morphology studies. The successful SAR experiment on Seasat and the Shuttle demonstrated the feasibility of global radar mapping at relatively high resolution from a spaceborn platform. The present investigation is concerned with the requirements of and the tradeoffs among several SAR image quality parameters. The results are presented from a survey study concerning the interpretability of a set of SAR images. The data used to generate these images were obtained by the Seasat SAR experiments. Attention is given to image scenes and the simulation experiment, image interpretation survey results, multiple-looks, the number of looks vs resolution, and number of bits vs resolution.

Li, F. K.↗

Radar imaging of glaciovolcanic stratigraphy, Mount Wrangell caldera, Alaska - Interpretation model and results

Glaciological measurements and an airborne radar sounding survey of the glacier lying in Mount Wrangell caldera raise many questions concerning the glacier thermal regime and volcanic history of Mount Wrangell. An interpretation model has been developed that allows the depth variation of temperature, heat flux, pressure, density, ice velocity, depositional age, and thermal and dielectric properties to be calculated. Some predictions of the interpretation model are that the basal ice melting rate is 0.64 m/yr and the volcanic heat flux is 7.0 W/sq m. By using the interpretation model to calculate two-way travel time and propagation losses, radar sounding traces can be transformed to give estimates of the variation of power reflection coefficient as a function of depth and depositional age. Prominent internal reflecting zones are located at depths of approximately 59-91m, 150m, 203m, and 230m. These internal reflectors are attributed to buried horizons of acidic ice, possibly intermixed with volcanic ash, that were deposited during past eruptions of Mount Wrangell.

Clarke, Garry K. C.↗

Registration of a synthetic aperture radar image to Thematic Mapper imagery for remote sensing applications

Multiple Thematic Mapper multitemporal acquisitions from Landsat and one synthetic-aperture radar acquisition from Seasat have been precisely registered using Johnson Space Center registration processors. The registered images have been output in the Universal Transverse Mercator projection. The procedure to accomplish such disparate data processing tasks and the registration accuracy evaluation are discussed.

Yao, S. S.↗

Integrating Radar Image Data with Google Maps

A public Web site has been developed as a method for displaying the multitude of radar imagery collected by NASA s Airborne Synthetic Aperture Radar (AIRSAR) instrument during its 16-year mission. Utilizing NASA s internal AIRSAR site, the new Web site features more sophisticated visualization tools that enable the general public to have access to these images. The site was originally maintained at NASA on six computers: one that held the Oracle database, two that took care of the software for the interactive map, and three that were for the Web site itself. Several tasks were involved in moving this complicated setup to just one computer. First, the AIRSAR database was migrated from Oracle to MySQL. Then the back-end of the AIRSAR Web site was updated in order to access the MySQL database. To do this, a few of the scripts needed to be modified; specifically three Perl scripts that query that database. The database connections were then updated from Oracle to MySQL, numerous syntax errors were corrected, and a query was implemented that replaced one of the stored Oracle procedures. Lastly, the interactive map was designed, implemented, and tested so that users could easily browse and access the radar imagery through the Google Maps interface.

Chapman, Bruce D.↗

Onboard Data Processor for Change-Detection Radar Imaging

A computer system denoted a change-detection onboard processor (CDOP) is being developed as a means of processing the digitized output of a synthetic-aperture radar (SAR) apparatus aboard an aircraft or spacecraft to generate images showing changes that have occurred in the terrain below between repeat passes of the aircraft or spacecraft over the terrain. When fully developed, the CDOP is intended to be capable of generating SAR images and/or SAR differential interferograms in nearly real time. The CDOP is expected to be especially useful for understanding some large-scale natural phenomena and/or mitigating natural hazards: For example, it could be used for near-real-time observation of surface changes caused by floods, landslides, forest fires, volcanic eruptions, earthquakes, glaciers, and sea ice movements. It could also be used to observe such longer-term surface changes as those associated with growth of vegetation (relevant to estimation of wildfire fuel loads). The CDOP is, essentially, an interferometric SAR processor designed to operate aboard a radar platform.

Lou, Yunling↗

Polarimetric radar imaging of the atmosphere

This paper deals with a new scheme of mapping the atmosphere using a wide band radar system where broad band noise is transmitted instead of single frequency. This type of radar system makes it possible to map the atmosphere with a single pulse and to observe fast changing features of atmosphere like lightning discharge and associated features. Three dimensional range-time plots and polarization signal statistics are presented to illustrate the advantages of this technique.

Manjunath, T. G.↗

Synthetic aperture radar imaging of ocean waves during the Marineland experiment

Wave contrast measurements are used to analyze X and L-band simultaneously obtained synthetic aperture radar (SAR) data of ocean gravity waves collected during the Marineland Experiment (1975). The results of the wave contrast measurements show that the ocean waves imaged by a SAR are more discernible using an X-band frequency than an L-band frequency and when the ocean waves are traveling in the range direction. It is determined that ocean waves can be detected by both X and L-band SAR, provided that the radar surface resolution is a small compared to the ocean wavelength. In addition, wave detection using L-band SAR can be improved by adjusting the focal distance and rotation of the cylindrical telescope in the SAR optical processor to account for wave motion. This adjustment is determined to be proportional to a value that is near the wave phase velocity.

Shuchman, R. A.↗

Potential of Radar Imaging and Sounding Methods in Mapping Heavily Eroded Impact Craters: Mapping Some Structural Elements of the Hico Crater, TX

Shuttle Radar Topography Mission (SRTM) and Ground Penetrating Radar (GPR) data collected over an area north of the town of Hico, central Texas, have been used to map disturbances in the surface topography and subsurface stratigraphy. The Radar topography results confirm the presence of multiple rings suggestive of an impact crater. Correlation between the orbital SRTM and on-the-ground GPR field data are affected by different biases related to variations in terrain and vegetation cover. Nevertheless, the correspondence of the two data sets supports the earlier conclusions that a complex, multiple ring impact structure is reflected in the topography of this area. The SRTM data reveal three previously unrecognized rings; with the outermost ring some 5-6 km in diameter. The crater appears to be significantly larger than the size (2.5 km diameter) previously inferred on the basis of aerial images. In addition, the GPR data suggest the presence of subsurface faulting that spatially coincides with the two inner rings of the crater. This suggests that the topographic rings are structurally controlled by faulting.

Heggy, E.↗

Radar image processing module development program, phase 3

The feasibility of using charge coupled devices in an IPM for processing synthetic aperture radar signals onboard the NASA Convair 990 (CV990) aircraft was demonstrated. Radar data onboard the aircraft was recorded and processed using a CCD sampler and digital tape recorder. A description of equipment and testing was provided. The derivation of the digital presum filter was documented. Photographs of the sampler/tape recorder, real time display and circuit boards in the IPM were also included.

Source record↗

Observation of sea-ice dynamics using synthetic aperture radar images: Automated analysis

The European Space Agency's ERS-1 satellite, as well as others planned to follow, is expected to carry synthetic-aperture radars (SARs) over the polar regions beginning in 1989. A key component in utilization of these SAR data is an automated scheme for extracting the sea-ice velocity field from a time sequence of SAR images of the same geographical region. Two techniques for automated sea-ice tracking, image pyramid area correlation (hierarchical correlation) and feature tracking, are described. Each technique is applied to a pair of Seasat SAR sea-ice images. The results compare well with each other and with manually tracked estimates of the ice velocity. The advantages and disadvantages of these automated methods are pointed out. Using these ice velocity field estimates it is possible to construct one sea-ice image from the other member of the pair. Comparing the reconstructed image with the observed image, errors in the estimated velocity field can be recognized and a useful probable error display created automatically to accompany ice velocity estimates. It is suggested that this error display may be useful in segmenting the sea ice observed into regions that move as rigid plates of significant ice velocity shear and distortion.

Vesecky, John F.↗

Simulation and studies of spaceborne synthetic aperture radar image quality with reduced bit rate

A computer simulation program that is used to study the effects of digitization in spaceborne synthetic aperture radar systems is described. An analytical study of the distortion noise introduced by the digitization process at various gain settings, sampling rates and bit error rates is presented and the results agree well with those obtained from the simulation program. The simulation program is also used to study the spatial frequency response of hard-limiting (quantizing to 1-bit) synthetic aperture radar systems. The implications of these results on synthetic aperture radar system design are discussed.

Li, F.↗

Adaptive filtering of radar images for autofocus applications

Autofocus techniques are being designed at the Jet Propulsion Laboratory to automatically choose the filter parameters (i.e., the focus) for the digital synthetic aperture radar correlator; currently, processing relies upon interaction with a human operator who uses his subjective assessment of the quality of the processed SAR data. Algorithms were devised applying image cross-correlation to aid in the choice of filter parameters, but this method also has its drawbacks in that the cross-correlation result may not be readily interpretable. Enhanced performance of the cross-correlation techniques of JPL was hypothesized given that the images to be cross-correlated were first filtered to improve the signal-to-noise ratio for the pair of scenes. The results of experiments are described and images are shown.

Stiles, J. A.↗

Forest discrimination with multipolarization imaging radar

The relations between polarization signatures and biophysical characteristics through a range of different forest environments were investigated using airborne synthetic-aperture (SAR) images acquired at L-band on March 1, 1984 in South Carolina. SAR data acquired in four linear polarization states with 10-m spatial resolution were encoded as color composite images and compared to US Forest Service forest stand data. The most useful correlative forest data were stand basal area, forest age, site condition index, and forest management type. It is found that the multipolarization images discriminate variation in tree density or difference in the amount of understory, but no evidence has been found for discrimination between evergreen and deciduous forest types.

Ford, J. P.↗

Shuttle Imaging Radar B (SIR-B) Weddell Sea ice observations - A comparison of SIR-B and scanning multichannel microwave radiometer ice concentrations

Ice concentrations over the Weddell Sea were studied using SIR-B data obtained during the October 1984 mission, with special attention given to the effect of ocean waves on the radar return at the ice edge. Sea ice concentrations were derived from the SIR-B data using two image processing methods: the classification scheme at JPL and the manual classification method at Scott Polar Research Institute (SPRI), England. The SIR ice concentrations were compared with coincident concentrations from the Nimbus-7 SMMR. For concentrations greater than 40 percent, which was the smallest concentration observed jointly by SIR-B and the SMMR, the mean difference between the two data sets for 12 points was 2 percent. A comparison between the JPL and the SPRI SIR-B algorithms showed that the algorithms agree to within 1 percent in the interior ice pack, but the JPL algorithm gives slightly greater concentrations at the ice edge (due to the fact that the algorithm is affected by the wind waves in these areas).

Martin, Seelye↗

Compact Ku-Band T/R Module for High-Resolution Radar Imaging of Cold Land Processes

Global measurement of terrestrial snow cover is critical to two of the NASA Earth Science focus areas: (1) climate variability and change and (2) water and energy cycle. For radar backscatter measurements, Ku-band frequencies, scattered mainly within the volume of the snowpack, are most suitable for the SWE (snow-water equivalent) measurements. To isolate the complex effects of different snowpack (density and snowgrain size), and underlying soil properties and to distinctly determine SWE, the space-based synthetic aperture radar (SAR) system will require a dual-frequency (13.4 and 17.2 GHz) and dual polarization approach. A transmit/receive (T/R) module was developed operating at Ku-band frequencies to enable the use of active electronic scanning phased-array antenna for wide-swath, high-resolution SAR imaging of terrestrial snow cover. The T/R module has an integrated calibrator, which compensates for all environmental- and time-related changes, and results in very stable power and amplitude characteristics. The module was designed to operate over the full frequency range of 13 to 18 GHz, although only the two frequencies, 13.4 GHz and 17.2 GHz, will be used in this SAR radar application. Each channel of the transmit module produces > 4 W (35 dbm) over the operating bandwidth of 20 MHz. The stability requirements of <0.1 dB receive gain accuracy and <0.1 dB transmit power accuracy over a wide temperature range are achieved using a self-correction scheme, which does real-time amplitude calibration so that the module characteristics are continually corrected. All the calibration circuits are within the T/R module. The timing and calibration sequence is stored in a control FPGA (field-programmable gate array) while an internal 128K 8bit high-speed RAM (random access memory) stores all the calibration values. The module was designed using advanced components and packaging techniques to achieve integration of the electronics in a 2 x6.5x1-in. (5x17x2.5-cm) package. The module size allows 4 T/R modules to feed the 16 16-element subarray on an antenna panel. The T/R module contains four transmit channels and eight receive channels (horizontal and vertical polarizations).

Andricos, Constantine↗