Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Forced diffusion via electrically induced crystallization for fabricating ZnO–Ti–Si structures

Highlights: • ZnO–Ti–Si system is very important for the structural design. • The electrically induced crystallization method is useful to diffusion process. • Intermetallic compound characteristics have been presented using electrically induced crystallization. • Interface mechanism about diffusion of TZO–TiSi{sub x}–Si structure is presented. - Abstract: Electrically induced crystallization (EIC) is a recently developed process for material modification. This study is applied to EIC to fabricate ZnO–Ti–Si multi-layer structures of various thicknesses to dope Ti into ZnO thin film and to form TiSi{sub x} intermetallic compound (IMC) in a single step. The IMC layer was confirmed using transmission electron microscopy images. The Ti layer thickness was more than 40 nm, which enhanced electron transmission and decreased the total electrical resistance in the structure. Finally, the diffusion mechanisms of EIC and the annealing process were investigated. This study shows that the EIC process has potential for industrial applications.

36 MATERIALS SCIENCE↗

Thermal conductivity of III-V semiconductor superlattices

This paper presents a semiclassical model for the anisotropic thermal transport in III-V semiconductor superlattices (SLs). An effective interface rms roughness is the only adjustable parameter. Thermal transport inside a layer is described by the Boltzmann transport equation in the relaxation time approximation and is affected by the relevant scattering mechanisms (three-phonon, mass-difference, and dopant and electron scattering of phonons), as well as by diffuse scattering from the interfaces captured via an effective interface scattering rate. The in-plane thermal conductivity is obtained from the layer conductivities connected in parallel. The cross-plane thermal conductivity is calculated from the layer thermal conductivities in series with one another and with thermal boundary resistances (TBRs) associated with each interface; the TBRs dominate cross-plane transport. The TBR of each interface is calculated from the transmission coefficient obtained by interpolating between the acoustic mismatch model (AMM) and the diffuse mismatch model (DMM), where the weight of the AMM transmission coefficient is the same wavelength-dependent specularity parameter related to the effective interface rms roughness that is commonly used to describe diffuse interface scattering. The model is applied to multiple III-arsenide superlattices, and the results are in very good agreement with experimental findings. The method is both simple and accurate, easy to implement, and applicable to complicated SL systems, such as the active regions of quantum cascade lasers. It is also valid for other SL material systems with high-quality interfaces and predominantly incoherent phonon transport.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational studies of two-phase cement-CO2-brine interaction in wellbore environments

Wellbore integrity is essential to ensuring long-term isolation of buoyant supercritical CO{sub 2} during geologic sequestration of CO{sub 2}. In this report, we summarize recent progress in numerical simulations of cement-brine-CO{sub 2} interactions with respect to migration of CO{sub 2} outside of casing. Using typical values for the hydrologic properties of cement, caprock (shale) and reservoir materials, we show that the capillary properties of good quality cement will prevent flow of CO{sub 2} into and through cement. Rather, CO{sub 2}, if present, is likely to be confined to the casing-cement or cement-formation interfaces. CO{sub 2} does react with the cement by diffusion from the interface into the cement, in which case it produces distinct carbonation fronts within the cement. This is consistent with observations of cement performance at the CO{sub 2}-enhanced oil recovery SACROC Unit in West Texas (Carey et al. 2007). For poor quality cement, flow through cement may occur and would produce a pattern of uniform carbonation without reaction fronts. We also consider an alternative explanation for cement carbonation reactions as due to CO{sub 2} derived from caprock. We show that carbonation reactions in cement are limited to surficial reactions when CO{sub 2} pressure is low (< 10 bars) as might be expected in many caprock environments. For the case of caprock overlying natural CO{sub 2} reservoirs for millions of years, we consider Scherer and Huet's (2009) hypothesis of diffusive steady-state between CO{sub 2} in the reservoir and in the caprock. We find that in this case, the aqueous CO{sub 2} concentration would differ little from the reservoir and would be expected to produce carbonation reaction fronts in cements that are relatively uniform as a function of depth.

54 ENVIRONMENTAL SCIENCES↗

First-principles study of hydrogen behavior near W/WC interfaces

Hydrogen (H) solution, migration, and binding to vacancies near the tungsten/tungsten carbide (W/WC) interfaces based on hcp WC or bcc W (W/WCb and Wb/WC) have been studied by first-principles simulations to provide insights into the effect of C on H behavior in W exposed to C deposition in fusion reactors. The H behavior near the W/WC interfaces is related to the tensile or compressive strain due to the lattice match and interfacial effects. Near the W/WCb interface, the H solution energy in hcp WC increases approaching the interface, while it decreases from the W side to the interface. The configuration change of the W slab significantly decreases the H solution energy but has only a modest effect on the H migration energy barrier in comparison with the values in bcc W. The interface enhances the H binding to vacancies in WC layers. Both the interface and configuration adjustment of the W slab reduce the H binding to vacancies on the W side of the interface. Near the Wb/WC interface, H solution energies in both WC and W slabs weakly decrease approaching the interface. The configuration change of the WC slab significantly increases the H solution energy and binding energy to vacancies but decreases the H migration energy barrier in comparison with the values in hcp WC. The H energetics near the W/WC interfaces indicate the likelihood of H localization and diffusion in the W side of the interface, rather than diffusing through the interface into WC layers.

Yang, L. (ORCID:0000000322166071)↗

Probing the electronic structure of buried interfaces via resonant scattering methods

Devices such as next-generation magnetic read heads demand energy storage capabilities and switching times beyond what is met by current permanent magnets. Superlattices of soft and hard ferromagnets (FM) that exhibit exchange-spring coupling are well-suited to be optimized for this purpose. Because of perovskites’ tunable properties from competing charge and spin degrees of freedom, one such system of interest is (001)-oriented La 0.7 Sr 0.3 CoO 3 (LSCO) capped with La 0.7 Sr 0.3 MnO 3 (LSMO). In the interfacial layers, FM moments are exchange-coupled strongly to each other, increasing overall coercivity. However, this system has subtleties that cannot be teased out in simple spin orientation models. In particular, growth mechanisms lead to rough interfaces and interlayer diffusion, which may drive a poorly understood phenomenon. The LSCO interfaces exhibit distinct magnetic properties from the bulk, possibly owing to an unexpected Co 2+ oxidation state near the LSMO that could lead to superexchange with Mn 4+ or possibly antiferromagnetism. Therefore the characterization of the electronic structure of interfaces is crucial to our understanding of the magnetic structure, but this is impossible with surface techniques, since most interfaces are buried, as well as spectroscopy, because the layers are similar in density. Specular x-ray reflectivity (SXR) is one method that describes layer thickness, density, and out-of-plane interface roughness of surfaces and buried interfaces. To characterize further, we apply SXR over absorption edges to increase Co/Mn contrast. Back-conversion to x-ray absorption near-edge structure (XANES) provides spectroscopic information on oxidation states that considers each sublayer separately, thereby determining how the sublayers couple.

36 MATERIALS SCIENCE↗

Importance of hydrophobic traps for proton diffusion in lyotropic liquid crystals

The diffusion of protons in self-assembled systems is potentially important for the design of efficient proton exchange membranes. In this work, we study proton dynamics in a low-water content, lamellar phase of a sodium-carboxylate gemini surfactant/water system using computer simulations. The hopping of protons via the Grotthuss mechanism is explicitly allowed through the multi-state empirical valence bond method. We find that the hydronium ion is trapped on the hydrophobic side of the surfactant-water interface, and proton diffusion then proceeds by hopping between surface sites. The importance of hydrophobic traps is surprising because one would expect the hydronium ions to be trapped at the charged headgroups. The physics illustrated in this system should be relevant to the proton dynamics in other amphiphilic membrane systems, whenever there exist exposed hydrophobic surface regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cation Intermixing And Electronic Deviations At The Insulating LaCrO3/SrTiO3(001) Interface

The interface between polar perovskite LaCrO3 (LCO) and non-polar SrTiO3(001) (STO), grown by molecular beam epitaxy, is examined using a combination of electron microscopy, spectroscopy, and Rutherford backscattering spectrometry. The LCO/STO(001) interface is insulating, a potential counter example for the claim that polar/nonpolar perovskite interfaces should be conductive by virtue of an electronic reconstruction to alleviate the polar discontinuity. The A-site cations of these ABO3 perovskites are found to diffuse across the interface to a greater extent than the B-site cations, based on high angle annular dark field scanning transmission electron microscopy (HAADF-STEM), energy dispersive x-ray spectroscopy (EDS) and electron energy loss spectroscopy (EELS). The B-site cation valences are shown to be partially reduced near the interface by analysis of EELS near-edge structures. The location and direction of these electronic modifications do not intuitively compensate the charge imbalance imposed by uneven cation inter-diffusion, and yet both the film and interface are insulating. These results highlight the importance of both the physical and electronic structure of such complex interfaces in determining their characteristics. Furthermore, the extent of inter-diffusion is shown to increase with increasing LCO film thickness, suggesting a potential mechanism behind the critical thickness for interfacial conductivity in other polar/non-polar oxide systems, and a fundamental limitation on the formation of abrupt interfaces in LCO/STO(001).

Environmental Molecular Sciences Laboratory↗

Superplastic Forming of Duplex Stainless Steel for Aerospace Part

In this study, the high temperature forming behavior of duplex stainless steel has been characterized and the outer shell of a combustion chamber was fabricated with pressure difference of hot gas. It consists of two parts which are the outer skin made of stainless steel to sustain the internal pressure and the inner shell made of copper alloy for regenerative cooling channels. Two outer skins partitioned to half with respect to the symmetric axis was prepared by hot gas forming process with a maximum pressure of 7 MPa following to FEM analysis. For inner layer, copper alloy was machined for cooling channels and then placed in the gas pressure welding fixture. It is shown that the optimum condition of gas pressure welding is 7 MPa at 890 deg. C, for one hour. EDX analysis and scanning electron microscope micrograph confirm the atomic diffusion process is observed at the interface and copper atoms diffuse into steel, while iron and chrome atoms diffuse into copper. The result shows that the manufacturing method with superplastic forming and gas pressure welding of steel and copper alloy has been successful for near net shape manufacturing of scaled combustion chamber of launch vehicle.

36 MATERIALS SCIENCE↗

A fractional model for anomalous diffusion with increased variability: Analysis, algorithms and applications to interface problems

Fractional equations have become the model of choice in several applications where heterogeneities at the microstructure result in anomalous diffusive behavior at the macroscale. Here, we introduce a new fractional operator characterized by a doubly-variable fractional order and possibly truncated interactions. Under certain conditions on the model parameters and on the regularity of the fractional order we show that the corresponding Poisson problem is well-posed. Additionally, we introduce a finite element discretization and describe an efficient implementation of the finite-element matrix assembly in the case of piecewise constant fractional order. Through several numerical tests, we illustrate the improved descriptive power of this new operator across media interfaces. Furthermore, we present one-dimensional and two-dimensional h-convergence results that show that the variable-order model has the same convergence behavior as the constant-order model.

97 MATHEMATICS AND COMPUTING↗

Qualitative investigation of cryogenic injected shock dissipation

The injection of fluid nitrogen into the flow discharged from a two-dimensional, ambient, static-temperature and static pressure Mach = 2.7 nitrogen flow tunnel was observed. A bow shock stands approximately one diameter off the end of the 3.2 mm o.d. x 1.6 mm i.d. injection tube placed directly into the tunnel exhaust. Cryogenic injection creates a high density region in the injected region and within the bow shock wake but the standoff distance remains unchanged. However as the temperature reaches a critical value the sharp shock interface begins to fade resembling the density gradient seen at the interface of a supercritical fluid and the shock interface begins to move into the supersonic stream. As the injection temperature decreases, the interface continues to move into the supersonic stream and becomes more diffuse; the shock interface can not be distinguished. The phenomena is completely reversible.

Hendricks, R. C.↗

Ignition Delay Associated with a Strained Strip

Ignition processes associated with two adjacent fuel-oxidizer interferences bounding a strained fuel strip are explored here using single-step activation energy asymptotics. Calculations are made for constant as well as temporally decaying strain fields. There possible models of ignition are determined: one in which the two interfaces ignite independently as diffusion flames; one in which the two interfaces ignite dependently and in which ignition occurs to form a single , premixed flame at very high strain rates before ignition is completely prevented. In contrast to a single, isolated interface in which ignition can be prevented by overmatching heat production with heat convection due to strain, ignition of a strained fuel strip can also be prevented if the finite extend of fuel is diluted by oxidizer more quickly than heat production can cause a positive feedback thermal runaway. These behaviors are dependent on the relative sizes of timescales associated with species and heat diffusion, with convection due to strain, and with the chemical reaction. The result here indicate that adjacent, strained species interfaces may ignite quite differently in nature from ignition of a single, strained intrface and that their interdependence should be considered as the interfaces are brought closer together in complex strain fields. Critical strain rates leading to complete ignition delay are found to be considerably smaller for the fuel strip than those for single interfaces as the fuel strip is made thin in comparison to diffusion and chemical length scales.

Gerk, T. J.↗

Characteristics of Bi-metallic Interfaces Formed During Direct Energy Deposition Additive Manufacturing Processing

Various additive manufacturing processes are being evaluated to reduce the time and cost for fabrication of low volume, complex, and multifunctional assemblies. This study evaluated two direct energy deposition processes for the fabrication of large bi-metallic structures. The materials evaluated were Inconel 625 and copper alloy C18150, which are used in various high heat flux applications. Inconel was deposited onto the C18150 substrate using blown powder and wire-fed processes. Complete bonding was obtained in both processes and the resulting interfaces were evaluated using microscopy and indentation testing. Differences were observed in the interface region suggesting the kinetic energy of the blown powder process resulted in more residual stress at the interface, promoting recrystallization and enhanced diffusion. This created a broader interface in the blown powder specimens compared to a narrower mechanically mixed interface with the wire-fed process.

36 MATERIALS SCIENCE↗

High Resolution Dopant Profiles Revealed by Atom Probe Tomography and STEM-EBIC for CdTe Based Solar Cells

Segregated elements and their diffusion profiles within grain boundaries and interfaces resulting from post deposition heat treatments are revealed using atom probe tomography (APT), scanning transmission electron microscopy (STEM), and electron beam induced current (EBIC) techniques. The results demonstrate how these techniques complement each other to provide conclusive evidence for locations of space charge regions and mechanisms that create them at the nanoscale. Most importantly, a Cl dopant profile that extends ~5 nm into CdTe grains interfacing the CdS is shown using APT and STEM synergy, which has been shown to push the pn-junction into the CdTe layer indicative of a homojunction (revealed by STEM EBIC). In addition, Cu and Cl concentrations within grain boundaries within several nms and µms from the CdS/CdTe interface are compared, Na segregation of <0.1% is detected, and S variations of ~1–3% are witnessed between CdTe grains close to the CdS/CdTe interface. The segregation and diffusion of these elements directly impacts on the material properties, such as band gap energy and n/p type properties. Optimization of the interfacial and grain boundary doping will lead to higher efficiency solar cells.

36 MATERIALS SCIENCE↗

Unexpected behaviour of one Pb monolayer deposited on aluminum oxide thin film grown on Ag(111)

Using scanning tunneling microscopy (STM), Auger electron spectroscopy, and low energy electron diffraction, we have observed a surprising complete dissolution at room temperature of one lead monolayer deposited by evaporation on an aluminum oxide thin film (∼0.8 nm thick) previously grown on Ag (111). We have observed the quasi-instantaneous diffusion of the lead deposit through the oxide layer to the silver/oxide interface. After the diffusion process, lead atoms form a Moiré superstructure, which is characterized by STM through the oxide layer. This unexpected behavior puts in light the very weak interaction between the aluminum oxide and the silver substrate.

36 MATERIALS SCIENCE↗

Interface composition between Fe{sub 3}O{sub 4} nanoparticles and GaAs for spintronic applications

Recent interest in spintronic applications has necessitated the study of magnetic materials in contact with semiconductor substrates; importantly, the structure and composition of these interfaces can influence both device functionality and the magnetic properties. Nanoscale ferromagnet/semiconductor structures are of particular interest. In this study, the interface structure between a monolayer of ferromagnetic magnetite (Fe{sub 3}O{sub 4}) nanoparticles and a GaAs substrate was studied using cross-sectional transmission electron microscopy techniques. It was found that a continuous amorphous oxide interface layer separates the nanoparticles from the GaAs substrate, and that iron diffused into the interface layer forming a compositional gradient. Electron energy-loss near-edge fine structures of the O K absorption edge revealed that the amorphous oxide is composed of γ-Fe{sub 2}O{sub 3} directly underneath the Fe{sub 3}O{sub 4} nanoparticles, followed by a solid solution of Ga{sub 2}O{sub 3} and FeO and mostly Ga{sub 2}O{sub 3} when approaching the buckled oxide/substrate interface. Real-space density functional theory calculations of the dynamical form factor confirmed the experimental observations. The implication of the findings on the optimization of these structures for spin injection is discussed.

36 MATERIALS SCIENCE↗